summaryrefslogtreecommitdiffstats
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2012-02-03mfd: Avoid twl6040-codec PLL reconfiguration when not neededPeter Ujfalusi
Do not reconfigure the PLL in case it has been configured already with the requested parameters. In case of different PLL configuration do only the needed changes. This can save considerable amount of time since we can avoid the defined protocol (with delays) for the PLL configuration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-03mfd: Store twl6040-codec mclk configurationPeter Ujfalusi
Store the last used mclk configuration for the PLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-22MFD: ucb1x00-ts: fix resume failureRussell King
If the ucb1x00 touchscreen is resumed while the touchscreen is being touched, the main thread stops responding. This occurs because two things happen: 1. When we suspended, we were woken up, and executed the loop. Finding that the touchscreen was not pressed, we prepare to schedule for a maximum timeout, before being stopped in try_to_freeze(). 2. an irq occurs, we disable the irq, and mark it as disabled, and wake the thread. This wake occurs while the thread is still within __refrigerator() 3. The thread is unfrozen, and __refrigerator() sets the threads state back to INTERRUPTIBLE. We then drop into schedule_timeout() with an infinite timeout and the IRQ disabled. This prevents any further screen touches activating the thread. Fix this by using kthread_freezable_should_stop() which handles the freezing issues for us outside of the hotspot where the task state matters. Include a flag to ignore the touchscreen until it is released to avoid sending unintended data to the application. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-21MFD: ucb1x00-core: fix gpiolib direction_output handlingRussell King
gpiolib drivers should first set the output data before setting the direction to avoid putting glitches on an output signal. As an additional bonus, we tweak the code to avoid unnecessary register writes to the output and direction registers if they have no need to be updated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-21MFD: ucb1x00-core: fix missing restore of io output data on resumeRussell King
We were not restoring the UCB1x00 gpio output data on resume, resulting in incorrect GPIO output data after a resume. Add the missing register write. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20MFD: mcp-core: fix complaints from the genirq layerRussell King
The genirq layer complains if an interrupt handler returns with interrupts enabled. The UCB1x00 handler does just this, because ucb1x00_enable() calls mcp_enable(), which uses spin_lock_irq() rather than spin_lock_irqsave(). Convert this, and the divisor setting functions to use spin_lock_irqsave(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp ↵Russell King
bus." This reverts commit 5dd7bf59e0e8563265b3e5b33276099ef628fcc7. Conflicts: scripts/mod/file2alias.c This change is wrong on many levels. First and foremost, it causes a regression. On boot on Assabet, which this patch gives a codec id of 'ucb1x00', it gives: ucb1x00 ID not found: 1005 0x1005 is a valid ID for the UCB1300 device. Secondly, this patch is way over the top in terms of complexity. The only device which has been seen to be connected with this MCP code is the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same driver. Adding a match table, requiring the codec string to match the hardware ID read out of the ID register, etc is completely over the top when we can just read the hardware ID register.
2012-01-20Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources."Russell King
This reverts commit af9081ae64b941d32239b947882cd59ba855c5db. This revert is necessary to revert 5dd7bf59e0e8563265b3e5b33276099ef628fcc7.
2012-01-14Merge tag 'for-linus' of git://github.com/rustyrussell/linuxLinus Torvalds
Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1 * tag 'for-linus' of git://github.com/rustyrussell/linux: module_param: check that bool parameters really are bool. intelfbdrv.c: bailearly is an int module_param paride/pcd: fix bool verbose module parameter. module_param: make bool parameters really bool (drivers & misc) module_param: make bool parameters really bool (arch) module_param: make bool parameters really bool (core code) kernel/async: remove redundant declaration. printk: fix unnecessary module_param_name. lirc_parallel: fix module parameter description. module_param: avoid bool abuse, add bint for special cases. module_param: check type correctness for module_param_array modpost: use linker section to generate table. modpost: use a table rather than a giant if/else statement. modules: sysfs - export: taint, coresize, initsize kernel/params: replace DEBUGP with pr_debug module: replace DEBUGP with pr_debug module: struct module_ref should contains long fields module: Fix performance regression on modules with large symbol tables module: Add comments describing how the "strmap" logic works Fix up conflicts in scripts/mod/file2alias.c due to the new linker- generated table approach to adding __mod_*_device_table entries. The ARM sa11x0 mcp bus needed to be converted to that too.
2012-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-13module_param: check type correctness for module_param_arrayRusty Russell
module_param_array(), unlike its non-array cousins, didn't check the type of the variable. Fixing this found two bugs. Cc: Luca Risolia <luca.risolia@studio.unibo.it> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: linux-media@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits) ASoC: twl6040 - Add method to query optimum PDM_DL1 gain ALSA: hda - Fix the lost power-setup of seconary pins after PM resume ALSA: usb-audio: add Yamaha MOX6/MOX8 support ALSA: virtuoso: add S/PDIF input support for all Xonars ALSA: ice1724 - Support for ooAoo SQ210a ALSA: ice1724 - Allow card info based on model only ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations ALSA: hdspm - Provide unique driver id based on card serial ASoC: Dynamically allocate the rtd device for a non-empty release() ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs ALSA: hda - Use auto-parser for HP laptops with cx20459 codec ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info() ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref() ALSA: hda/cirrus - support for iMac12,2 model ASoC: cx20442: add bias control over a platform provided regulator ALSA: usb-audio - Avoid flood of frame-active debug messages ALSA: snd-usb-us122l: Delete calls to preempt_disable mfd: Put WM8994 into cache only mode when suspending ... Fix up trivial conflicts in: - arch/arm/mach-s3c64xx/mach-crag6410.c: renamed speyside_wm8962 to tobermory, added littlemill right next to it - drivers/base/regmap/{regcache.c,regmap.c}: duplicate diff that had already come in with other changes in the regmap tree
2012-01-11Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: (68 commits) power_supply: Mark da9052 driver as broken power_supply: Drop usage of nowarn variant of sysfs_create_link() s3c_adc_battery: Average over more than one adc sample power_supply: Add DA9052 battery driver isp1704_charger: Fix missing check jz4740-battery: Fix signedness bug power_supply: Assume mains power by default sbs-battery: Fix devicetree match table ARM: rx51: Add bq27200 i2c board info sbs-battery: Change power supply name devicetree-bindings: Propagate bq20z75->sbs rename to dt bindings devicetree-bindings: Add vendor entry for Smart Battery Systems sbs-battery: Rename internals to new name bq20z75: Rename to sbs-battery wm97xx_battery: Use DEFINE_MUTEX() for work_lock max8997_charger: Remove duplicate module.h lp8727_charger: Some minor fixes for the header lp8727_charger: Add header file power_supply: Convert drivers/power/* to use module_platform_driver() power_supply: Add "unknown" in power supply type ...
2012-01-09Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
2012-01-09Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
New feature development This adds support for new features, and contains stuff from most platforms. A number of these patches could have fit into other branches, too, but were small enough not to cause too much confusion here. * tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mfd/db8500-prcmu: remove support for early silicon revisions ARM: ux500: fix the smp_twd clock calculation ARM: ux500: remove support for early silicon revisions ARM: ux500: update register files ARM: ux500: register DB5500 PMU dynamically ARM: ux500: update ASIC detection for U5500 ARM: ux500: support DB8520 ARM: picoxcell: implement watchdog restart ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3 ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 ARM: Orion: Remove address map info from all platform data structures ARM: Orion: Get address map from plat-orion instead of via platform_data ARM: Orion: mbus_dram_info consolidation ARM: Orion: Consolidate the address map setup ARM: Kirkwood: Add configuration for MPP12 as GPIO ARM: Kirkwood: Recognize A1 revision of 6282 chip ARM: ux500: update the MOP500 GPIO assignments ...
2012-01-09Merge branch 'samsung/driver' into next/driversArnd Bergmann
Conflicts: arch/arm/mach-mxs/include/mach/common.h Pull in previous samsung conflict merges and do a trivial merge of an mxs double-add conflict. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-09mfd: Put WM8994 into cache only mode when suspendingMark Brown
This is required by the ASoC driver for very low power modes where the device is fully idle but we want to update controls. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-09mfd: Add pm ops to max8925Kevin Liu
Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert aat2870 to dev_pm_opsMark Brown
The I2C suspend and resume functions have been deprecated since the driver was introduced. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jin Park <jinyoungp@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Still check other interrupts if we get a wm831x touchscreen IRQMark Brown
It is possible that we will see another interrupt triggering at the same time as the touchscreen interrupts so it's still worth checking other possible sources. Almost all of the win from the fast path comes from only needing to read the primary register and saving the I/O costs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Introduce missing kfree in 88pm860x probe routineJulia Lawall
Error handling code following a kzalloc should free the allocated data. At this point, chip has been allocated and some fields have been initialized, but it has not been stored anywhere, so it should be freed before leaving the function. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add S5M series configurationSangbeom Kim
This patch add Samsung S5M Kconfig and Makefile entry. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add s5m series irq driverSangbeom Kim
This patch support irq for s5m series. Basically, S5M8767 and S5M8763 irq can be handled by this patch. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add S5M core driverSangbeom Kim
S5M series are pmic including mutiple functional devices. It can support PMIC, RTC, Battery charger, codec. This patch implement core driver for s5m series. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fix stmpe section mismatchSamuel Ortiz
This fixes: WARNING: drivers/built-in.o(.text+0xf368f): Section mismatch in reference from the function stmpe_probe() to the function .devinit.text:stmpe_chip_init() The function stmpe_probe() references the function __devinit stmpe_chip_init(). Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fix stmpe build warningSamuel Ortiz
This fixes: drivers/mfd/stmpe.c:114:1: warning: data definition has no type or storage class [enabled by default] drivers/mfd/stmpe.c:114:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fix STMPE I2c build failureSamuel Ortiz
STMPE i2c is a bool and should depend on I2c=y. That fixes: drivers/built-in.o: In function `i2c_block_write': stmpe-i2c.c:(.text+0xf4553): undefined reference to +`i2c_smbus_write_i2c_block_data' drivers/built-in.o: In function `i2c_block_read': stmpe-i2c.c:(.text+0xf457f): undefined reference to +`i2c_smbus_read_i2c_block_data' drivers/built-in.o: In function `i2c_reg_write': stmpe-i2c.c:(.text+0xf45ab): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `i2c_reg_read': stmpe-i2c.c:(.text+0xf45d4): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `stmpe_init': stmpe-i2c.c:(.init.text+0xaf22): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `stmpe_exit': stmpe-i2c.c:(.exit.text+0x5e5): undefined reference to `i2c_del_driver' Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Constify aat2870-core i2c_device_id tableAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com>
2012-01-09mfd: Add support for stmpe variant 801Viresh Kumar
STMPE801 is a GPIO expander. Registers for 801 are much different from other variants. This patch adds support for STMPE801 in stmpe mfd driver. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for stmpe variant 610Viresh Kumar
STMPE610 is very much like STMPE811, except the number of gpio pins, which is 8 in 811 and 6 in 610. This patch adds support for variant 610. STMPE610 will share most of the code with STMPE811. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add support for STMPE SPI interfaceViresh Kumar
Few STMPE controller can have register interface over SPI or I2C. Current implementation only supports I2C. This patch adds support for SPI interface for accessing STMPE's address space. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Separate out STMPE controller and interface specific codeViresh Kumar
Few STMPE controller can have register interface over SPI or I2C. Current implementation only supports I2C and all code is present in a single file stmpe.c. It would be better to separate out I2C interface specific code from controller specific code. Later SPI specific code can be added in a separate file. This patch separates out I2C and controller specific code into separate files, making stmpe.c independent of I2C. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Remove unused wm831x_irq_data_to_mask_reg()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add platform data and devices for MAX8997 LED controlDonggeun Kim
MAX8997 device does not support LED control function of it. To enable MAX8997-LED driver, platform data and devices for LED are updated. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Make TPS65910 usable without interruptsAfzal Mohammed
TPS65910 can be used without interrupts. Hence let probe succeed in case interrupt can't be configured and let Kernel only to complain about it Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add power off functionality to TWLIgor Grinberg
TWL family of PMICs, used in master mode, have a power off functionality. The resulting power off sequence shuts down all the SoC supplies, LDOs, etc. The sequence is described in the datasheets chapter "Power-Off Sequence". Note, that board must be wired correctly for the power off to work as expected. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: twl-core: Add initial DT support for twl4030/twl6030Benoit Cousson
Add initial device-tree support for twl familly chips. The current version is missing the regulator entries due to the lack of DT regulator bindings for the moment. Only the simple sub-modules that do not depend on platform_data information can be initialized properly. Add irqdomain support. Add documentation for the Texas Instruments TWL Integrated Chip. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Balaji T K <balajitk@ti.com> Cc: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> [grant.likely@secretlab.ca: Fix IRQ_DOMAIN dependency in kconfig] Cc: Grant Likely <grant.likely@secretlab.ca>
2012-01-09mfd: Return an error on failed wm831x register writesMark Brown
Got dropped in the regmap conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert WM8400 to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Unify abx500 headers in mfd/abx500Linus Walleij
This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Use gpio_request_one from twl6040-coreAxel Lin
Use gpio_request_one() instead of multiple gpiolib calls. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Use gpio_request_one from omap-usb-hostAxel Lin
Use gpio_request_one() instead of multiple gpiolib calls. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Use gpio_request_one from dm355evm_mspAxel Lin
Use gpio_request_one() instead of multiple gpiolib calls. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Use gpio_request_one from aat2870-coreAxel Lin
Use gpio_request_one() instead of multiple gpiolib calls. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jin Park <jinyoungp@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Convert to DEFINE_PCI_DEVICE_TABLEAxel Lin
Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE tables. Cc: Andres Salomon <dilinger@queued.net> Cc: Denis Turischev <denis@compulab.co.il> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Vincent Sanders <vince@simtec.co.uk> Cc: Mocean Laboratories <info@mocean-labs.com> Cc: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add WM1811A device ID to wm8994 driverMark Brown
The WM1811A is a variant of the WM1811 with pin configuration changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Add a dependency on HAVE_CLK for tc6393xbChristoph Fritz
tc6393xb calls the clk API. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Don't declare jz4740_adc_cells constAxel Lin
Remove the const keyword to fix below warning: CC drivers/mfd/jz4740-adc.o drivers/mfd/jz4740-adc.c: In function 'jz4740_adc_probe': drivers/mfd/jz4740-adc.c:290: warning: passing argument 3 of 'mfd_add_devices' discards qualifiers from pointer target type include/linux/mfd/core.h:93: note: expected 'struct mfd_cell *' but argument is of type 'const struct mfd_cell *' Also make jz4740_adc_cells static, is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Use standard device wakeup for handling max8998 wakeup deviceJonghwan Choi
Use device_init_wakeup & device_may_wakeup to init wakeup Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Fix cs5535 section mismatchChristian Gmeiner
Silence following warnings: WARNING: drivers/mfd/cs5535-mfd.o(.data+0x20): Section mismatch in reference from the variable cs5535_mfd_drv to the function .devinit.text:cs5535_mfd_probe() The variable cs5535_mfd_drv references the function __devinit cs5535_mfd_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: drivers/mfd/cs5535-mfd.o(.data+0x28): Section mismatch in reference from the variable cs5535_mfd_drv to the function .devexit.text:cs5535_mfd_remove() The variable cs5535_mfd_drv references the function __devexit cs5535_mfd_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Rename the variable from *_drv to *_driver so modpost ignore the OK references to __devinit/__devexit functions. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-14 21:46:54 +0000