summaryrefslogtreecommitdiffstats
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2011-03-23mfd: Add fast path for WM831x touchscreen interruptsMark Brown
The WM831x interrupt controller provides reporting of the touchscreen related interrupts in the primary interrupt status register as a performance optimisation - use this to avoid reading the secondary status registers for those interrupts. For code simplicity and to avoid iterating over all interrupts we open code for the two affected interrupt sources. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Convert WM831x SPI to use dev_pm_opsMark Brown
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the WM831x SPI driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Invert tps6586x GPIO and subdevices initializationVincent Palatin
When using a fixed voltage regulator triggered by a TPS6586x GPIO, this allows to declare and initialize it conveniently from the "subdev" list. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Add BTN_TOUCH event to ucb1x00-tsJochen Friedrich
Add BTN_TOUCH event reporting to ucb1x00_ts touchscreen driver. This will make this touchscreen driver behave consistently wrt. BTN_TOUCH. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Remove obsolete cleanup for wl1273 clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Support configuration of WM831x /IRQ output in CMOS modeMark Brown
Provide platform data allowing the system to set the /IRQ pin into CMOS mode rather than the default open drain. The default value of this platform data reflects the default hardware configuration so there should be no change to existing users. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Convert pcf50633 to dev_pm_opsMark Brown
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the pcf50633 driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Staticise non-exported symbols in MAX8998 driverMark Brown
No need to have them in the global namespace and sparse complains. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Convert adp5520 to dev_pm_opsMark Brown
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the adp5520 driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Leave acknowledgement of WM831x touchscreen IRQs to the driverMark Brown
The WM831x touchscreen interrupts need acknowledgement even when using direct signals to the CPU (which don't go through the core) so leave the acknowledgement up to the touchscreen driver for simplicity. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-22video, sm501: add OF binding to support SM501Heiko Schocher
- add binding to OF, compatible name "smi,sm501" Signed-off-by: Heiko Schocher <hs@denx.de> cc: linux-fbdev@vger.kernel.org cc: devicetree-discuss@ozlabs.org cc: Ben Dooks <ben@simtec.co.uk> cc: Vincent Sanders <vince@simtec.co.uk> cc: Samuel Ortiz <sameo@linux.intel.com> cc: linux-kernel@vger.kernel.org cc: Randy Dunlap <rdunlap@xenotime.net> cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-22video, sm501: add I/O functions for use on powerpcHeiko Schocher
- add read/write functions for using this driver also on powerpc plattforms Signed-off-by: Heiko Schocher <hs@denx.de> cc: linux-fbdev@vger.kernel.org cc: devicetree-discuss@ozlabs.org cc: Ben Dooks <ben@simtec.co.uk> cc: Vincent Sanders <vince@simtec.co.uk> cc: Samuel Ortiz <sameo@linux.intel.com> cc: linux-kernel@vger.kernel.org cc: Randy Dunlap <rdunlap@xenotime.net> cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-21[media] MFD: WL1273 FM Radio: MFD driver for the FM radioMatti Aaltonen
This is the core of the WL1273 FM radio driver, it connects the two child modules. The two child drivers are drivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c. The radio-wl1273 driver implements the V4L2 interface and communicates with the device. The ALSA codec offers digital audio, without it only analog audio is available. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-17Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-16Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits) USB: Add support for SuperSpeed isoc endpoints xhci: Clean up cycle bit math used during stalls. xhci: Fix cycle bit calculation during stall handling. xhci: Update internal dequeue pointers after stalls. USB: Disable auto-suspend for USB 3.0 hubs. USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol. xhci: Return canceled URBs immediately when host is halted. xhci: Fixes for suspend/resume of shared HCDs. xhci: Fix re-init on power loss after resume. xhci: Make roothub functions deal with device removal. xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports. xhci: Return a USB 3.0 hub descriptor for USB3 roothub. xhci: Register second xHCI roothub. xhci: Change xhci_find_slot_id_by_port() API. xhci: Refactor bus suspend state into a struct. xhci: Index with a port array instead of PORTSC addresses. USB: Set usb_hcd->state and flags for shared roothubs. usb: Make core allocate resources per PCI-device. usb: Store bus type in usb_hcd, not in driver flags. usb: Change usb_hcd->bandwidth_mutex to a pointer. ...
2011-03-15Merge branch 'davinci-next-2' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel-stable
2011-03-15mfd: add driver for sequencer serial portCyril Chemparathy
TI's sequencer serial port (TI-SSP) is a jack-of-all-trades type of serial port device. It has a built-in programmable execution engine that can be programmed to operate as almost any serial bus (I2C, SPI, EasyScale, and others). This patch adds a driver for this controller device. The driver does not expose a user-land interface. Protocol drivers built on top of this layer are expected to remain in-kernel. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-02mfd: Avoid tps6586x burst writesvwadekar@nvidia.com
tps6586 does not support burst writes. i2c writes have to be 1 byte at a time. Cc: stable@kernel.org Signed-off-by: Varun Wadekar <vwadekar@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-02mfd: Don't suspend WM8994 if the CODEC is not suspendedMark Brown
ASoC supports keeping the audio subsysetm active over suspend in order to support use cases such as audio passthrough from a cellular modem with the main CPU suspended. Ensure that we don't power down the CODEC when this is happening by checking to see if VMID is up and skipping suspend and resume when it is. If the CODEC has suspended then it'll turn VMID off before the core suspend() gets called. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-02mfd: Fix DaVinci voice codec device nameManjunathappa, Prakash
Fix the device name in DaVinci Voice Codec MFD driver to load davinci-vcif and cq93vc codec client drivers. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-02mfd: Fix NULL pointer due to non-initialized ucb1x00-ts absinfoJochen Friedrich
Call input_set_abs_params instead of manually setting absbit only. This fixes this oops: Unable to handle kernel NULL pointer dereference at virtual address 00000024 Internal error: Oops: 41b67017 [#1] CPU: 0 Not tainted (2.6.37 #4) pc : [<c016d1fc>] lr : [<00000000>] psr: 20000093 sp : c19e5f30 ip : c19e5e6c fp : c19e5f58 r10: 00000000 r9 : c19e4000 r8 : 00000003 r7 : 000001e4 r6 : 00000001 r5 : c1854400 r4 : 00000003 r3 : 00000018 r2 : 00000018 r1 : 00000018 r0 : c185447c Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: c1b6717f Table: c1b6717f DAC: 00000017 Stack: (0xc19e5f30 to 0xc19e6000) 5f20: 00000003 00000003 c1854400 00000013 5f40: 00000001 000001e4 000001c5 c19e5f80 c19e5f5c c016d5e8 c016cf5c 000001e4 5f60: c1854400 c18b5860 00000000 00000171 000001e4 c19e5fc4 c19e5f84 c01559a4 5f80: c016d584 c18b5868 00000000 c1bb5c40 c0035afc c18b5868 c18b5868 c1a55d54 5fa0: c18b5860 c0155750 00000013 00000000 00000000 00000000 c19e5ff4 c19e5fc8 5fc0: c0050174 c015575c 00000000 c18b5860 00000000 c19e5fd4 c19e5fd4 c1a55d54 5fe0: c00500f0 c003b464 00000000 c19e5ff8 c003b464 c00500fc 04000400 04000400 Backtrace: Function entered at [<c016cf50>] from [<c016d5e8>] Function entered at [<c016d578>] from [<c01559a4>] r8:000001e4 r7:00000171 r6:00000000 r5:c18b5860 r4:c1854400 Function entered at [<c0155750>] from [<c0050174>] Function entered at [<c00500f0>] from [<c003b464>] r6:c003b464 r5:c00500f0 r4:c1a55d54 Code: e59520fc e1a03286 e0433186 e0822003 (e592000c) >>PC; c016d1fc <input_handle_event+2ac/5a0> <===== Trace; c016cf50 <input_handle_event+0/5a0> Trace; c016d5e8 <input_event+70/88> Trace; c016d578 <input_event+0/88> Trace; c01559a4 <ucb1x00_thread+254/2dc> Trace; c0155750 <ucb1x00_thread+0/2dc> Trace; c0050174 <kthread+84/8c> Trace; c00500f0 <kthread+0/8c> Trace; c003b464 <do_exit+0/624> Signed-off-by: Jochen Friedrich <jochen@scram.de> CC: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-02mfd: Fix ASIC3 build with GENERIC_HARDIRQS_NO_DEPRECATEDLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-01usb: host: omap: common usb host core driverKeshava Munegowda
enabling and disabling the common clocks for ehci and ohci is implemented. usbhs is a common parent platform driver for EHCI and OHCI driver. This driver receives the clock enable and disable requests from ehci and ohci drivers.The UHH and TLL initialization is also performed. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-01-14mfd: ab8500-core chip version cut 2.0 supportMattias Wallin
This patch adds support for chip version 2.0 or cut 2.0. One new interrupt latch register - latch 12 - is introduced. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Flag WM831x /IRQ as a wake sourceMark Brown
The WM831x can generate wake events, some unconditionally, so flag the primary IRQ as a wake source in order to help the CPU treat the /IRQ signal appropriately. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert WM831x away from legacy I2C PM operationsMark Brown
Since the legacy bus PM operations are deprecated move the suspend method over to dev_pm_ops. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Support LP3974 RTCMyungJoo Ham
The first releases of LP3974 have a large delay in RTC registers, which requires 2 seconds of delay after writing to a rtc register (recommended by National Semiconductor's engineers) before reading it. If "rtc_delay" field of the platform data is true, the rtc driver assumes that such delays are required. Although we have not seen LP3974s without requiring such delays, we assume that such LP3974s will be released soon (or they have done so already) and they are supported by "lp3974" without setting "rtc_delay" at the platform data. This patch adds delays with msleep when writing values to RTC registers if the platform data has rtc_delay set. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: MAX8998/LP3974 hibernation supportMyungJoo Ham
This patch makes the driver to save and restore register values for hibernation. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd/ab8500: remove spi supportSundar Iyer
Since the Ab8500 v1.0, the SPI support is deprecated on the HW. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Remove ARCH_U8500 dependency from AB8500Mark Brown
While it is vanishingly unlikely that the device will be deployed on other architectures removing the dependency facilitates build testing when doing generic work on both the MFD core for the device and the subsystem drivers. There appears to be no actual code dependency. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Add __devexit annotation for vx855_removeAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: twl6030 irq_data conversion.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert Wolfson MFD drivers to use irq_data accessor functionMark Brown
Actually makes the code larger rathe rthan smaller but does provide some isolation against core API changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert TWL4030 to new irq_ APIsMark Brown
The genirq core is being updated to pass struct irq_data to irq_chip operations. Update the TWL4030 driver to the new APIs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert tps6586x driver to new irq_ APIMark Brown
The genirq core is being updated to supply struct irq_data to irq_chip operations rather than an irq number. Update the tps6586x driver to the new APIs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert tc6393xb driver to new irq_ APIsMark Brown
The genirq core is being update to pass struct irq_data to irq_chip rather than an irq number to operations. Update tc6393 to the new API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert t7166xb driver to new irq_ APIMark Brown
The genirq core is being updated to pass struct irq_data rather than an irq number to irq_chip operations. Update the t7166xb driver to the new APIs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert SMTPE driver to new irq_ APIsMark Brown
The genirq core is being updated to supply struct irq_data to irq_chip operations rather than an irq number. Update the SMTPE driver to the new APIs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert MAX8998 driver to irq_ APIMark Brown
The genirq core is being updated to pass struct irq_data to interrupt operations, update the MAX8998 driver to the new API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert max8925 to new irq_ APIMark Brown
The genirq infrastructure is being converted to pass struct irq_data rather than an irq number to irq_chip operations, update max8925 to the new APIs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert jz4740-adc to new irq_ methodsMark Brown
Convert the jz4740-adc driver to use the recently introduced IRQ API variants which are passed struct irq_data rather than an IRQ number. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert HTC I2C CPLD driver to irq_ APIMark Brown
The genirq core is being converted to pass a struct irq_data to interrupt operations rather than an IRQ number. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert HTC EGPIO driver to irq_ APIMark Brown
The genirq core is being converted to pass a struct irq_data to interrupt operations rather than an IRQ number. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert ezx-pcap to new irq_ methodsLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert AB8500 to new irq_ methodsMark Brown
The genirq core is being converted to supply struct irq_data to chips rather than the interrupt number. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert AB3500 to new irq_ APIsMark Brown
The genirq core is being updated to pass struct irq_data rather than irq numbers into chip drivers. As part of the update assignments to NULL for unused operations are removed, these are not needed and the genirq docs should be good enough. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert ASIC3 to new irq_ APIsMark Brown
The interrupt controller APIs are being updated to pass a struct irq_data rather than the interrupt number. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert 88PM860x driver to new irq_ APIsMark Brown
The interrupt controller APIs are being updated to pass a struct irq_data rather than the interrupt number. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Staticise internal functions in HTC I2CCPLD driverMark Brown
Most of these are GPIO operations, though a couple are just internal only functions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Use NULL to initialise NULL pointers in ab8500-debugfsMark Brown
Partly for coding style reasons, but mostly because sparse warns on it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-06-26 02:18:36 +0000