summaryrefslogtreecommitdiffstats
path: root/drivers/misc
AgeCommit message (Collapse)Author
2011-01-10Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (29 commits) of/flattree: forward declare struct device_node in of_fdt.h ipmi: explicitly include of_address.h and of_irq.h sparc: explicitly cast negative phandle checks to s32 powerpc/405: Fix missing #{address,size}-cells in i2c node powerpc/5200: dts: refactor dts files powerpc/5200: dts: Change combatible strings on localbus powerpc/5200: dts: remove unused properties powerpc/5200: dts: rename nodes to prepare for refactoring dts files of/flattree: Update dtc to current mainline. of/device: Don't register disabled devices powerpc/dts: fix syntax bugs in bluestone.dts of: Fixes for OF probing on little endian systems of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OF of/flattree: Add of_flat_dt_match() helper function of_serial: explicitly include of_irq.h of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree of/flattree: Reorder unflatten_dt_node of/flattree: Refactor unflatten_dt_node of/flattree: Add non-boottime device tree functions of/flattree: Add Kconfig for EARLY_FLATTREE ... Fix up trivial conflict in arch/sparc/prom/tree_32.c as per Grant.
2010-12-24ioc4: use static work_struct for ioc4_load_modules()Tejun Heo
There is no reason to dynamically allocate work_struct for ioc4_load_modules(). It makes the code more complex and makes it impossible to flush the work directly. Use static work ioc4_load_modules_work instead and flush it directly on exit. This removes the use of flush_scheduled_work() which is being deprecated. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Brent Casavant <bcasavan@sgi.com>
2010-12-24misc/at24: add more sanity checks for parametersWolfram Sang
Side-effects happen when passing 0 to either io_limit or page_size. Give an error in case of this misconfiguration. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-12-24misc/at24: parse device tree dataWolfram Sang
Information about the pagesize and read-only-status may also come from the devicetree. Parse this data, too, and act accordingly. While we are here, change the initialization printout a bit. write_max is useful to know to detect performance bottlenecks, the rest is superfluous. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-11-25drivers/misc/isl29020.c: remove incorrect kfree in isl29020_remove()Axel Lin
struct als_data *data is not used in this driver at all. Also add a missing ">" character for MODULE_AUTHOR. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25sgi-xpc: XPC fails to discover partitions with all nasids above 128Robin@sgi.com
UV hardware defines 256 memory protection regions versus the baseline 64 with increasing size for the SN2 ia64. This was overlooked when XPC was modified to accomodate both UV and SN2. Without this patch, a user could reconfigure their existing system and suddenly disable cross-partition communications with no indication of what has gone wrong. It also prevents larger configurations from using cross-partition communication. Signed-off-by: Robin Holt <holt@sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-15i2c: Remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-11-12drivers/misc/bh1770glc.c: error handling in bh1770_power_state_store()Dan Carpenter
There was a signedness bug so "ret" was never less than zero and that breaks the error handling. Also in the original code it would overwrite ret and the result is still negative but it's bogus number instead of the correct error code. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/misc/apds9802als.c: fix signedness bugVasiliy Kulikov
i2c_smbus_read_byte_data() may return negative error code. This is not seen to als_sensing_range_store() as the result is stored in unsigned int. Made it signed. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Cc: Hong Liu <hong.liu@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Anantha Narayanan <anantha.narayanan@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12misc/isl29020: signedness bug in als_sensing_range_store()Dan Carpenter
"ret_val" is supposed to be signed here or the error handling breaks. Also we should check the return value from i2c_smbus_read_byte_data(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-29Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb,ppc: Individual register get/set for ppc kgdbts: prevent re-entry to kgdbts before it unregisters debug_core,x86,blackfin: Clean up hw debug disable API kdb: Fix early debugging crash regression kgdb,arm: fix register dump kdb: fix per_cpu command to remove supress mask kdb: Add kdb kernel module sample
2010-10-29kgdbts: prevent re-entry to kgdbts before it unregistersDongdong Deng
The "kgdb_connected" variable of debug_core just indicates whether or not kgdbts is connected to the debug_core. It does not completely prevent a script from trying invoke kgdbts again and possibly crashing the system (see Call Trace below). The configured variable in kgtbts can be used instead of kgdb_connected instead of kgdb_connected. The cleanup_kgdbts() can also be removed because there is no possible way to build kgdbts as a kernel module that you could unload with rmmod. Call Trace: ----------------------------------------------------------------- root:/$ echo kgdbts=V1S1000 > /sys/module/kgdbts/parameters/kgdbts kgdb: Unregistered I/O driver kgdbts, debugger disabled. ------------[ cut here ]------------ WARNING: at kernel/debug/debug_core.c:1002 kgdb_unregister_io_module+0xec/0x100() Hardware name: Moon Creek platform Modules linked in: Pid: 664, comm: sh Not tainted 2.6.34.1-WR4.0.0.0_standard #58 Call Trace: [<c103b1ed>] warn_slowpath_common+0x6d/0xa0 [<c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100 [<c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100 [<c10544e0>] ? param_attr_store+0x0/0x20 [<c103b235>] warn_slowpath_null+0x15/0x20 [<c1079fdc>] kgdb_unregister_io_module+0xec/0x100 [<c124e4ea>] cleanup_kgdbts+0x1a/0x20 [<c124eced>] param_set_kgdbts_var+0x6d/0xb0 [<c124ec80>] ? param_set_kgdbts_var+0x0/0xb0 [<c10544f7>] param_attr_store+0x17/0x20 [<c105457c>] module_attr_store+0x2c/0x40 [<c111fe84>] sysfs_write_file+0x94/0xf0 [<c10d42f6>] vfs_write+0x96/0x130 [<c111fdf0>] ? sysfs_write_file+0x0/0xf0 [<c10d44d6>] sys_write+0x46/0xd0 [<c13bf329>] system_call_done+0x0/0x4 ---[ end trace 4eb028c6ee43154c ]--- kgdb: Unregistered I/O driver kgdbts, debugger disabled. ----------------------------------------------------------------- [jason.wessel@windriver.com: remove cleanup_kgdbts() ] Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-10-29convert get_sb_single() usersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29misc: Add ab8500 pwm driverArun Murthy
This patch adds a Pulse Width Modulation driver for Analog Baseband Chip AB8500. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-28Merge 'staging-next' to Linus's treeGreg Kroah-Hartman
This merges the staging-next tree to Linus's tree and resolves some conflicts that were present due to changes in other trees that were affected by files here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits) split invalidate_inodes() fs: skip I_FREEING inodes in writeback_sb_inodes fs: fold invalidate_list into invalidate_inodes fs: do not drop inode_lock in dispose_list fs: inode split IO and LRU lists fs: switch bdev inode bdi's correctly fs: fix buffer invalidation in invalidate_list fsnotify: use dget_parent smbfs: use dget_parent exportfs: use dget_parent fs: use RCU read side protection in d_validate fs: clean up dentry lru modification fs: split __shrink_dcache_sb fs: improve DCACHE_REFERENCED usage fs: use percpu counter for nr_dentry and nr_dentry_unused fs: simplify __d_free fs: take dcache_lock inside __d_path fs: do not assign default i_ino in new_inode fs: introduce a per-cpu last_ino allocator new helper: ihold() ...
2010-10-26misc devices: do not enable by defaultBorislav Petkov
Do not enable this Kconfig menu by default since it contains devices not present on the majority of systems. This is becoming a pain and a waste of time especially when doing a bunch of kernel builds on different systems daily and have to answer "make oldconfig" prompts for strange devices. Signed-off-by: Borislav Petkov <bp@alien8.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Andres Salomon <dilinger@collabora.co.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26drivers/misc/apds9802als.c: add runtime PM supportHong Liu
Update the driver for the needed runtime power features. Remove the old user controlled power functions. [akpm@linux-foundation.org: put PM code under CONFIG_PM] Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26drivers/misc/apds9802als.c: ALS drivers for the apds9802alsanantha
This adds support for the ADPS9802ALS sensor. Cleanup by Alan Cox - move mutexes to cover more things - report I/O errors back to user space - report range and values in LUX Signed-off-by: Anantha Narayanan <anantha.narayanan@intel.com> [The 4K and 64K in the hw spec actually means 4095 (12bit) and 65535 (16bit).] Signed-off-by: Hong Liu <hong.liu@intel.com> [Updated to match the ALS light API interface convention from Samu] Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26drivers/misc/isl29020.c: ambient light sensorKalhan Trisal
The LS driver will read the latest Lux measurement based upon the light brightness and will report the LUX output through sysfs interface. This hardware isn't quite the same as the ISL29003 so has a different driver. [akpm@linux-foundation.org: put PM code under #ifdef CONFIG_PM] Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com> [Runtime power management support added] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> [Fixes to runtime PM] Signed-off-by: Liu Hong <hong.liu@intel.com> [Cleanups and added checks for I2C errors, reworked the API to match the saner one agreed for other sensors] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26lkdtm: prefix enum constantsNamhyung Kim
Prefix cname and ctype constants with CN/CT_. This is especially for the conflict on BUG which causes a build break if arch defines it as a inline function, i.e. MIPS. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Ankita Garg <ankita@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26drivers/misc: driver for APDS990X ALS and proximity sensorsSamu Onkalo
This is a driver for Avago APDS990X combined ALS and proximity sensor. Interface is sysfs based. The driver uses interrupts to provide new data. The driver supports pm_runtime and regulator frameworks. See Documentation/misc-devices/apds990x.txt for details Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26drivers/misc: driver for bh1770glc / sfh7770 ALS and proximity sensorSamu Onkalo
This is a driver for ROHM BH1770GLC and OSRAM SFH7770 combined ALS and proximity sensor. Interface is sysfs based. The driver uses interrupts to provide new data. The driver supports pm_runtime and regulator frameworks. See Documentation/misc-devices/bh1770glc.txt for details Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26ad525x_dpot: use correct rdac channel for ad5251/ad5252steven miao
The ad5251/ad5252 devices have rdac1 and rdac3, but no rdac0. So make sure we use the right channels so userspace gets correct data and not just garbage. Signed-off-by: steven miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Chris Verges <chrisv@cyberswitching.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26drivers/misc/ad525x_dpot.c: new featuresMichael Hennerich
Add support for AD5270, AD5271, AD5272, AD5274 digital potentiometers. Add 20-TP feature for AD5291 and AD5292 parts, and update feature list. AD5291 rdac read back must be shifted by two. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Chris Verges <chrisv@cyberswitching.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26drivers/misc/ad525x_dpot.c: fix part name typos in definesMichael Hennerich
There is no runtime effect by this change. It frees up namespace for defines erroneously used. This is required to actually support devices requiring the namespace, added with "drivers/misc/ad525x_dpot.c: new features". All defines touched have the same value defined, after the change. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Chris Verges <chrisv@cyberswitching.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26drivers/misc/phantom.c: add missing warning messages in phantom_probe()Rahul Ruikar
phantom_probe() can fail in many places. Add missing warning messages in pci_enable_device() and pci_request_regions(). Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26drivers/misc/ad525x_dpot.c: fix typo in spi write16 and write24 transfer countsMichael Hennerich
This is a bug fix. Some SPI connected devices using 16/24 bit accesses, previously failed, now work. This typo slipped in after testing, during some restructuring. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Chris Verges <chrisv@cyberswitching.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26sgi-xp: incoming XPC channel messages can come in after the channel's ↵Robin Holt
partition structures have been torn down Under some workloads, some channel messages have been observed being delayed on the sending side past the point where the receiving side has been able to tear down its partition structures. This condition is already detected in xpc_handle_activate_IRQ_uv(), but that information is not given to xpc_handle_activate_mq_msg_uv(). As a result, xpc_handle_activate_mq_msg_uv() assumes the structures still exist and references them, causing a NULL-pointer deref. Signed-off-by: Robin Holt <holt@sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25fs: do not assign default i_ino in new_inodeChristoph Hellwig
Instead of always assigning an increasing inode number in new_inode move the call to assign it into those callers that actually need it. For now callers that need it is estimated conservatively, that is the call is added to all filesystems that do not assign an i_ino by themselves. For a few more filesystems we can avoid assigning any inode number given that they aren't user visible, and for others it could be done lazily when an inode number is actually needed, but that's left for later patches. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits) driver core: Display error codes when class suspend fails Driver core: Add section count to memory_block struct Driver core: Add mutex for adding/removing memory blocks Driver core: Move find_memory_block routine hpilo: Despecificate driver from iLO generation driver core: Convert link_mem_sections to use find_memory_block_hinted. driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted. kobject: Introduce kset_find_obj_hinted. driver core: fix build for CONFIG_BLOCK not enabled driver-core: base: change to new flag variable sysfs: only access bin file vm_ops with the active lock sysfs: Fail bin file mmap if vma close is implemented. FW_LOADER: fix kconfig dependency warning on HOTPLUG uio: Statically allocate uio_class and use class .dev_attrs. uio: Support 2^MINOR_BITS minors uio: Cleanup irq handling. uio: Don't clear driver data uio: Fix lack of locking in init_uio_class SYSFS: Allow boot time switching between deprecated and modern sysfs layout driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices ...
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-22Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: block: autoconvert trivial BKL users to private mutex drivers: autoconvert trivial BKL users to private mutex ipmi: autoconvert trivial BKL users to private mutex mac: autoconvert trivial BKL users to private mutex mtd: autoconvert trivial BKL users to private mutex scsi: autoconvert trivial BKL users to private mutex Fix up trivial conflicts (due to addition of private mutex right next to deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
2010-10-22hpilo: Despecificate driver from iLO generationdann frazier
This driver supports iLO, iLO2 and iLO3. However, comments and Kconfig reference only iLO and iLO2. Let's just call it "iLO" to avoid having to update strings for each iLO generation. This is similar to the change made to hpwdt in commit 36e3ff44cebd7e46756dec88f30c982bebefdab7. Signed-off-by: dann frazier <dannf@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22pch_phub: fix build warningsGreg Kroah-Hartman
This patch fixes up all of the build warnings for the pch_phub driver. Cc: Masayuki Ohtake <masa-korg@dsn.okisemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22add Packet hub driver for Topcliff Platform controller hubMasayuki Ohtak
Packet hub driver of Topcliff PCH Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platform. All IO peripherals in Topcliff PCH are actually devices sitting on AMBA bus. Packet hub is a special converter device in Topcliff PCH that translate AMBA transactions to PCI Express transactions and vice versa. Thus packet hub helps present all IO peripherals in Topcliff PCH as PCIE devices to IA system. Topcliff PCH has MAC address and Option ROM data. These data are in SROM which is connected to PCIE bus. Packet hub driver of Topcliff PCH can access MAC address and Option ROM data in SROM via sysfs interface. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-18Update broken web addresses in the kernel.Justin P. Mattock
The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-14drivers: misc: ti-st: fix review commentsPavan Savoy
Based on comments from Jiri Slaby, drop the register storage specifier, remove the unused code, cleanup the const to non-const type casting. Also make the line discipline ops structure static, since its a singleton, unmodified structure which need not be in heap. Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06misc: ti-st: Kconfig & Makefile for TI_STPavan Savoy
Add the Kconfig and the Makefile for the TI_ST driver. TI_ST driver is the line discipline driver for the Texas Instrument's WiLink chipsets. Also add the ti-st folder to list of drivers under drivers/misc. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06staging: ti-st: move TI_ST from staging to misc/Pavan Savoy
move the 3 source files st_core.c, st_kim.c and st_ll.c from staging to drivers/misc/. Texas Instrument's WiLink 7 chipset packs wireless technologies like Bluetooth, FM, GPS and WLAN into a single die. Among these the Bluetooth, FM Rx/Tx and GPS are interfaced to a apps processor over a single UART. This line discipline driver allows various protocol drivers such as Bluetooth BlueZ driver, FM V4L2 driver and GPS simple character device driver to communicate with its relevant core in the chip. Each protocol or technologies use a logical channel to communicate with chip. Bluetooth uses the HCI-H4 [channels 1-4], FM uses a CH-8 and GPS a CH-9 protocol. The driver also constitutes the TI HCI-LL Power Management protocol which use channels 30-33. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05drivers: autoconvert trivial BKL users to private mutexArnd Bergmann
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. These drivers do not seem to be under active maintainance from my brief investigation. Apologies to those maintainers that I have missed. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-09-30i2c: Remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-22vmware balloon: rename moduleDmitry Torokhov
In an effort to minimize customer confusion we want to unify naming convention for VMware-provided kernel modules. This change renames the balloon driver from vmware_ballon to vmw_balloon. We expect to follow this naming convention (vmw_<module_name>) for all modules that are part of mainline kernel and/or being distributed by VMware, with the sole exception of vmxnet3 driver (since the name of mainline driver happens to match with the name used in VMware Tools). Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Acked-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-16ibmasmfs: use generic_file_llseekArnd Bergmann
The default for llseek will change to no_llseek, so ibmasmfs needs to add explicit .llseek assignments. Since we're dealing with regular files from a VFS perspective, use generic_file_llseek. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-09-16lkdtm: use generic_file_llseek in debugfsArnd Bergmann
When the default llseek behavior gets changed to not allowing seek, all file operations that rely on the current behaviour need to use an explicit .llseek operation. The files that lkdtm uses in debugfs are regular files and they get read using simple_read_from_buffer, so generic_file_llseek is the right operation. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-09-16net/wireless: use generic_file_llseek in debugfsArnd Bergmann
The default llseek operation is changing from default_llseek to no_llseek, so all code relying on the current behaviour needs to make that explicit. The wireless driver infrastructure and some of the drivers make use of generated debugfs files, so they cannot be converted by our script that automatically determines the right operation. All these files use debugfs and they typically rely on simple_read_from_buffer, so the best llseek operation here is generic_file_llseek. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org
2010-08-23Fix typo in Kconfig help textThomas Weber
Fix the name of the sensor: BMP086 => BMP085 Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-12Merge branch 'params' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * 'params' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (22 commits) param: don't deref arg in __same_type() checks param: update drivers/acpi/debug.c to new scheme param: use module_param in drivers/message/fusion/mptbase.c ide: use module_param_named rather than module_param_call param: update drivers/char/ipmi/ipmi_watchdog.c to new scheme param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes. param: lock myri10ge_fw_name against sysfs changes. param: simple locking for sysfs-writable charp parameters param: remove unnecessary writable charp param: add kerneldoc to moduleparam.h param: locking for kernel parameters param: make param sections const. param: use free hook for charp (fix leak of charp parameters) param: add a free hook to kernel_param_ops. param: silence .init.text references from param ops Add param ops struct for hvc_iucv driver. nfs: update for module_param_named API change AppArmor: update for module_param_named API change param: use ops in struct kernel_param, rather than get and set fns directly param: move the EXPORT_SYMBOL to after the definitions. ...