summaryrefslogtreecommitdiffstats
path: root/drivers/misc
AgeCommit message (Collapse)Author
2013-09-03Merge tag 'char-misc-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc patches from Greg KH: "Here is the big char/misc driver pull request for 3.12-rc1 Lots of driver updates all over the char/misc tree, full details in the shortlog" * tag 'char-misc-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (62 commits) drivers: uio: Kconfig: add MMU dependancy for UIO drivers: uio: Add driver for Humusoft MF624 DAQ PCI card drivers: uio_pdrv_genirq: use dev_get_platdata() drivers: uio_pruss: use dev_get_platdata() drivers: uio_dmem_genirq: use dev_get_platdata() drivers: parport: Kconfig: exclude h8300 for PARPORT_PC drivers: misc: ti-st: fix potential race if st_kim_start fails Drivers: hv: vmbus: Do not attempt to negoatiate a new version prematurely misc: vmw_balloon: Remove braces to fix build for clang. Drivers: hv: vmbus: Fix a bug in the handling of channel offers vme: vme_ca91cx42.c: fix to pass correct device identity to free_irq() VMCI: Add support for virtual IOMMU VMCI: Remove non-blocking/pinned queuepair support uio: uio_pruss: remove unnecessary platform_set_drvdata() parport: amiga: remove unnecessary platform_set_drvdata() vme: vme_vmivme7805.c: add missing __iomem annotation vme: vme_ca91cx42.c: add missing __iomem annotation vme: vme_tsi148.c: add missing __iomem annotation drivers/misc/hpilo: Correct panic when an AUX iLO is detected uio: drop unused vma_count member in uio_device struct ...
2013-08-30drivers: misc: ti-st: fix potential race if st_kim_start failsOleksandr Kozaruk
If st_kim_start() fails registered protocols should be removed. This is done by calling st_reg_complete(), which as comment states is called with spin lock held. But in st_register() when st_kim_start fails it is called without holding spin lock, creating possibility of concurrent access to st_gdata data members. Hold spin lock while calling st_reg_complete if st_kim_start() fails. Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@globallogic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27misc: vmw_balloon: Remove braces to fix build for clang.Jan-Simon Möller
Based on a patch from: PaX Team <pageexec at freemail.hu> in a mailing list message at: http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20120507/142707.html Clang chokes on the notation "inl (%dx)" but works for "inl %dx"; GNU as accepts both forms. CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27VMCI: Add support for virtual IOMMUAndy King
This patch adds support for virtual IOMMU to the vmci module. We switch to DMA consistent mappings for guest queuepair and doorbell pages that are passed to the device. We still allocate each page individually, since there's no guarantee that we'll get a contiguous block of physical for an entire queuepair (especially since we allow up to 128 MiB!). Also made the split between guest and host in the kernelIf struct much clearer. Now it's obvious which fields are which. Acked-by: George Zhang <georgezhang@vmware.com> Acked-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27VMCI: Remove non-blocking/pinned queuepair supportAndy King
We added this for a special case that doesn't exist on Linux. Remove the non-blocking/pinned queuepair code and simplify the driver in preparation for adding virtual IOMMU support. Acked-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27hwmon: Change my email address.Darrick J. Wong
I've changed employers, so change the email addresses to match. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-14drivers/misc/hpilo: Correct panic when an AUX iLO is detectedMark Rusk
Using an uninitialized variable 'devnum' after 'goto out;' was causing panic. Just go ahead and return, we need to ignore AUX iLO devs. Oops: 0002 [#1] SMP . . . RIP [<ffffffffa033e270>] ilo_probe+0xec/0xe7c [hpilo] Signed-off-by: Mark Rusk <mark.rusk@hp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12mei: me: fix hardware reset flowTomas Winkler
Both H_IS and H_IE needs to be set to receive H_RDY interrupt 1. Assert H_IS to clear the interrupts during hw reset and use mei_me_reg_write instead of mei_hcsr_set as the later strips down the H_IS 2. fix interrupt disablement embarrassing typo hcsr |= ~H_IE -> hcsr &= ~H_IE; this will remove the unwanted interrupt on power down 3. remove useless debug print outs Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-29Merge 3.11-rc3 into char-misc-next.Greg Kroah-Hartman
This resolves a merge issue with: drivers/misc/mei/init.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26mei: don't get stuck in select during resetTomas Winkler
Clear pending connection after hw reset but before hw start and wake up the waiting task in poll. Signal POLLERR in select when device went through reset. Add wrapper mei_cl_is_connected for checking if the device and client are connected. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26Merge tag 'char-misc-3.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc patches from Greg KH: "Here are some char/misc patches for 3.11-rc3. It's pretty much just: - mei fixes - hyperv fixes - new ja_JP translation update all tiny stuff, but fixes for issues people have reported." * tag 'char-misc-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: HOWTO ja_JP sync mei: me: fix waiting for hw ready mei: don't have to clean the state on power up mei: me: fix reset state machine mei: hbm: fix typo in error message Tools: hv: KVP: Fix a bug in IPV6 subnet enumeration Drivers: hv: balloon: Do not post pressure status if interrupted Drivers: hv: balloon: Fix a bug in the hot-add code Drivers: hv: vmbus: incorrect device name is printed when child device is unregistered
2013-07-24misc: sram: fix error path in sram_probeHeiko Stübner
The pool is created thru devm_gen_pool_create, so the call to gen_pool_destroy is not necessary. Instead the sram-clock must be turned off again if it exists. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24drivers/misc: don't use devm_pinctrl_get_select_default() in probeWolfram Sang
Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24mei: bus: do not overflow the device name bufferTomas Winkler
1. use strncmp for comparsion strncpy was used for copying which may omit the final %NUL terminator 2. id->name is statically defined so we can use sizeof Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24mei: wake also writers on resetTomas Winkler
wake writers otherwise might have processes waiting endlessly on wait_tx during reset Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24lkdtm: add "EXEC_*" triggersKees Cook
Add new crash locations that attempt to execute non-executable memory regions (data segment, stack, kmalloc, vmalloc). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24lkdtm: add "SPINLOCKUP" triggerKees Cook
For additional lockup testing, add "SPINLOCKUP" to trigger a spinlock deadlock when triggered twice. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24lkdtm: add "WARNING" triggerKees Cook
For additional testing, add "WARNING" as a trigger that calls WARN_ON(1). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24lkdtm: fix stack protector triggerKees Cook
The -fstack-protector compiler flag will only build stack protections if a character array is seen. Additionally, the offset to the saved instruction pointer changes based on architecture, so stomp much harder (64 bytes) when corrupting the stack. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24Revert "misc: c2port: use dev_bin_attrs instead of hand-coding it"Greg Kroah-Hartman
This reverts commit 3ce20a710f1dac8f5073d1b138039c75dd46d967 It should go in through the driver-core tree, not the char-misc tree, my mistake. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24misc: c2port: use dev_bin_attrs instead of hand-coding itGreg Kroah-Hartman
Classes support a list of default binary attributes, so use that in the c2port driver, instead of hand creating and destroying the file, which is racing with userspace. Bonus is this removes lines of code. Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -- drivers/misc/c2port/core.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-)
2013-07-23mei: me: fix waiting for hw readyTomas Winkler
1. MEI_INTEROP_TIMEOUT is in seconds not in jiffies so we use mei_secs_to_jiffies macro While cold boot is fast this is relevant in resume 2. wait_event_interruptible_timeout can return with -ERESTARTSYS so do not override it with -ETIMEDOUT 3.Adjust error message Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23mei: don't have to clean the state on power upTomas Winkler
When powering up, we don't have to clean up the device state nothing is connected. Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23mei: me: fix reset state machineTomas Winkler
ME HW ready bit is down after hw reset was asserted or on error. Only on error we need to enter the reset flow, additional reset need to be prevented when reset was triggered during initialization , power up/down or a reset is already in progress Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23mei: hbm: fix typo in error messageTomas Winkler
writet -> write Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-18ASoC: atmel-ssc: remove clk_disable_unprepare call from critical sectionBoris BREZILLON
clk_prepare/unprepare (and indirectly clk_prepare_enable/disable_unprepare) may sleep and thus cannot be called in critical section. This patch fix a bug introduced by commit 6f0d94790efe9f4481bbd7c174ef0e9b5e5db7c4 where clk_disable_unprepare was called with user_lock hold. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) treewide: relase -> release Documentation/cgroups/memory.txt: fix stat file documentation sysctl/net.txt: delete reference to obsolete 2.4.x kernel spinlock_api_smp.h: fix preprocessor comments treewide: Fix typo in printk doc: device tree: clarify stuff in usage-model.txt. open firmware: "/aliasas" -> "/aliases" md: bcache: Fixed a typo with the word 'arithmetic' irq/generic-chip: fix a few kernel-doc entries frv: Convert use of typedef ctl_table to struct ctl_table sgi: xpc: Convert use of typedef ctl_table to struct ctl_table doc: clk: Fix incorrect wording Documentation/arm/IXP4xx fix a typo Documentation/networking/ieee802154 fix a typo Documentation/DocBook/media/v4l fix a typo Documentation/video4linux/si476x.txt fix a typo Documentation/virtual/kvm/api.txt fix a typo Documentation/early-userspace/README fix a typo Documentation/video4linux/soc-camera.txt fix a typo lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment ...
2013-07-03Merge tag 'sound-3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "A relative calm release at this time with a flat diffstat. The only significant change in the ALSA core side is the support for more than 32 card instances, configurable via kconfig. Other than that, in both ASoC and other parts, mostly some improvements and fixes on the driver side. - hda: More quirks for ALC269-variants on Dell & co, VIA codec fixes - hda: Haswell HDMI audio fixes, runtime PM improvements - hda: Intel BayTrail support, ALC5505 DSP support - es1968: MediaForte M56VAP support - usb-audio: Improved support for Yamaha/Roland devices - usb-audio: M2Tech hiFace, Audio Advantage Micro II support - hdspm: wordclock fixes - ASoC: Pending fixes for WM8962 - ASoC: Cleanups and fixes for Blackfin, SGTL5000 and UX500 - ASoC: Generalisation of the Bluetooth and HDMI stub drivers - ASoC: SSM2518 and RT5640 codec drivers. - ASoC: Tegra CPUs with RT5640 machine driver - ASoC: AC'97 refactoring bug fixes - ASoC: ADAU1701 driver fixes - Clean up of *_set_drvdata() in a wide range of drivers" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (284 commits) ALSA: vmaster: Fix the regression of missing vmaster hook call ALSA: hda - Add Dell SSID to support Headset Mic recording ASoC: adau1701: remove control_data assignment ASoC: adau1701: more direct regmap usage ASoC: ac97: fixup multi-platform AC'97 module build failure ASoC: pxa2xx: fixup multi-platform AC'97 build failures ASoC: tegra20-ac97: Remove unused variable ASoC: tegra20-ac97: Remove duplicate error message ALSA: usb-audio: Add Audio Advantage Micro II ASoC: tas5086: fix Mid-Z implementation ASoC: tas5086: fix TAS5086_CLOCK_CONTROL register size ALSA: Replace the magic number 44 with const ALSA: hda - Fix the max length of control name in generic parser ALSA: hda - Guess what, it's two more Dell headset mic quirks ALSA: hda - Yet another Dell headset mic quirk ALSA: hda - Add support for ALC5505 DSP power-save mode ASoC: mfld: Remove unused variable ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE ALSA: usb-audio: claim autodetected PCM interfaces all at once ALSA: usb-audio: remove superfluous Roland quirks ...
2013-07-03drivers/misc/sgi-gru/grufault.c: fix a sanity test in gru_set_context_option()Dimitri Sivanich
"req.val1 == -1" is valid but it doesn't make sense to check gru_base[-1]. gru_base[] is a global array. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-02Merge tag 'driver-core-3.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the big driver core merge for 3.11-rc1 Lots of little things, and larger firmware subsystem updates, all described in the shortlog. Nice thing here is that we finally get rid of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had been always on for a number of kernel releases, now it's just removed)" * tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits) driver core: device.h: fix doc compilation warnings firmware loader: fix another compile warning with PM_SLEEP unset build some drivers only when compile-testing firmware loader: fix compile warning with PM_SLEEP set kobject: sanitize argument for format string sysfs_notify is only possible on file attributes firmware loader: simplify holding module for request_firmware firmware loader: don't export cache_firmware and uncache_firmware drivers/base: Use attribute groups to create sysfs memory files firmware loader: fix compile warning firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER Documentation: Updated broken link in HOWTO Finally eradicate CONFIG_HOTPLUG driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware Documentation: Tidy up some drivers/base/core.c kerneldoc content. platform_device: use a macro instead of platform_driver_register firmware: move EXPORT_SYMBOL annotations firmware: Avoid deadlock of usermodehelper lock at shutdown dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly ...
2013-06-24build some drivers only when compile-testingJiri Slaby
Some drivers can be built on more platforms than they run on. This is a burden for users and distributors who package a kernel. They have to manually deselect some (for them useless) drivers when updating their configs via oldconfig. And yet, sometimes it is even impossible to disable the drivers without patching the kernel. Introduce a new config option COMPILE_TEST and make all those drivers to depend on the platform they run on, or on the COMPILE_TEST option. Now, when users/distributors choose COMPILE_TEST=n they will not have the drivers in their allmodconfig setups, but developers still can compile-test them with COMPILE_TEST=y. Now the drivers where we use this new option: * PTP_1588_CLOCK_PCH: The PCH EG20T is only compatible with Intel Atom processors so it should depend on x86. * FB_GEODE: Geode is 32-bit only so only enable it for X86_32. * USB_CHIPIDEA_IMX: The OF_DEVICE dependency will be met on powerpc systems -- which do not actually support the hardware via that method. * INTEL_MID_PTI: It is specific to the Penwell type of Intel Atom device. [v2] * remove EXPERT dependency [gregkh - remove chipidea portion, as it's incorrect, and also doesn't apply to my driver-core tree] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: linux-usb@vger.kernel.org Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-geode@lists.infradead.org Cc: linux-fbdev@vger.kernel.org Cc: Richard Cochran <richardcochran@gmail.com> Cc: netdev@vger.kernel.org Cc: Ben Hutchings <ben@decadent.org.uk> Cc: "Keller, Jacob E" <jacob.e.keller@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24mei: check whether hw start has succeededTomas Winkler
hw start may fail therefore the reset flow has to check for the return value Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24mei: check if the hardware reset succeededTomas Winkler
The hw may have multiple steps for resetting so we need to check if it has really succeeded. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24mei: mei_cl_connect: don't multiply the timeout twiceFrode Isaksen
MEI_CL_CONNECT_TIMEOUT is the timeout in seconds to wait for a response in mei_cl_connect. The value was converted to jiffies using mei_secs_to_jiffies helper function and assigned to a local variable which is by mistake again multiplied by HZ Signed-off-by: Frode Isaksen <frodex.isaksen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24mei: do not override a client writing state when bufferingTomas Winkler
when we buffer write request we should not switch to MEI_WRITING since this will override MEI_WRITE_COMPLETE state of preceding write Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24mei: move mei_cl_irq_write_complete to client.cTomas Winkler
mei_cl_irq_write_complete operates on a client so move it to client.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17mei: support HBM versioningTomas Winkler
Driver can work properly if device support driver HBM version or driver can downgrade its supported HBM version level Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17Misc: sram: Remove unneeded checkAlexander Shiyan
Patch removes unneeded check for resource since devm_ioremap_resource do all for us. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17Merge 3.10-rc6 into char-misc-nextGreg Kroah-Hartman
We want the fixes in here.
2013-06-17Merge remote-tracking branch 'asoc/topic/atmel' into asoc-nextMark Brown
2013-06-14Merge tag 'char-misc-3.10-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc fixes from Greg Kroah-Hartman: "Here are some small mei driver fixes for 3.10-rc6 that fix some reported problems" * tag 'char-misc-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: me: clear interrupts on the resume path mei: nfc: fix nfc device freeing mei: init: Flush scheduled work before resetting the device
2013-06-14sgi: xpc: Convert use of typedef ctl_table to struct ctl_tableJoe Perches
This typedef is unnecessary and should just be removed. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Robin Holt <holt@sgi.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-06-13mei: me: clear interrupts on the resume pathTomas Winkler
We need to clear pending interrupts on the resume path. This brings the device into defined state before starting the reset flow This should solve suspend/resume issues: mei_me : wait hw ready failed. status = 0x0 mei_me : version message write failed Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13mei: nfc: fix nfc device freeingTomas Winkler
The nfc_dev is a static variable and is not cleaned properly upon reset mainly ndev->cl and ndev->cl_info are not set to NULL after freeing which mei_stop:198: mei_me 0000:00:16.0: stopping the device. [ 404.253427] general protection fault: 0000 [#2] SMP [ 404.253437] Modules linked in: mei_me(-) binfmt_misc snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave fuse loop dm_mod hid_generic usbhid hid coretemp acpi_cpufreq mperf kvm_intel kvm crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul snd_hda_codec_hdmi glue_helper aes_x86_64 e1000e snd_hda_intel snd_hda_codec ehci_pci iTCO_wdt iTCO_vendor_support ehci_hcd snd_hwdep xhci_hcd snd_pcm usbcore ptp mei sg microcode snd_timer pps_core i2c_i801 snd pcspkr battery rtc_cmos lpc_ich mfd_core soundcore usb_common snd_page_alloc ac ext3 jbd mbcache drm_kms_helper drm intel_agp i2c_algo_bit intel_gtt i2c_core sd_mod crc_t10dif thermal fan video button processor thermal_sys hwmon ahci libahci libata scsi_mod [last unloaded: mei_me] [ 404.253591] CPU: 0 PID: 5551 Comm: modprobe Tainted: G D W 3.10.0-rc3 #1 [ 404.253611] task: ffff880143cd8300 ti: ffff880144a2a000 task.ti: ffff880144a2a000 [ 404.253619] RIP: 0010:[<ffffffff81334e5d>] [<ffffffff81334e5d>] device_del+0x1d/0x1d0 [ 404.253638] RSP: 0018:ffff880144a2bcf8 EFLAGS: 00010206 [ 404.253645] RAX: 2020302e30202030 RBX: ffff880144fdb000 RCX: 0000000000000086 [ 404.253652] RDX: 0000000000000001 RSI: 0000000000000086 RDI: ffff880144fdb000 [ 404.253659] RBP: ffff880144a2bd18 R08: 0000000000000651 R09: 0000000000000006 [ 404.253666] R10: 0000000000000651 R11: 0000000000000006 R12: ffff880144fdb000 [ 404.253673] R13: ffff880149371098 R14: ffff880144482c00 R15: ffffffffa04710e0 [ 404.253681] FS: 00007f251c59a700(0000) GS:ffff88014e200000(0000) knlGS:0000000000000000 [ 404.253689] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 404.253696] CR2: ffffffffff600400 CR3: 0000000145319000 CR4: 00000000001407f0 [ 404.253703] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 404.253710] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 404.253716] Stack: [ 404.253720] ffff880144fdb000 ffff880143ffe000 ffff880149371098 ffffffffa0471000 [ 404.253732] ffff880144a2bd38 ffffffff8133502d ffff88014e20cf48 ffff880143ffe1d8 [ 404.253744] ffff880144a2bd48 ffffffffa02a4749 ffff880144a2bd58 ffffffffa02a4ba1 [ 404.253755] Call Trace: [ 404.253766] [<ffffffff8133502d>] device_unregister+0x1d/0x60 [ 404.253787] [<ffffffffa02a4749>] mei_cl_remove_device+0x9/0x10 [mei] [ 404.253804] [<ffffffffa02a4ba1>] mei_nfc_host_exit+0x21/0x30 [mei] [ 404.253819] [<ffffffffa029c2dd>] mei_stop+0x3d/0x90 [mei] [ 404.253830] [<ffffffffa046e220>] mei_me_remove+0x60/0xe0 [mei_me] [ 404.253843] [<ffffffff81278f37>] pci_device_remove+0x37/0xb0 [ 404.253855] [<ffffffff81337c68>] __device_release_driver+0x98/0x100 [ 404.253865] [<ffffffff81337d80>] driver_detach+0xb0/0xc0 [ 404.253876] [<ffffffff81336b4f>] bus_remove_driver+0x8f/0x120 [ 404.253891] [<ffffffff81075990>] ? try_to_wake_up+0x2b0/0x2b0 [ 404.253903] [<ffffffff81338a48>] driver_unregister+0x58/0x90 [ 404.253913] [<ffffffff8127906b>] pci_unregister_driver+0x2b/0xb0 [ 404.253924] [<ffffffffa046f244>] mei_me_driver_exit+0x10/0xdcc [mei_me] [ 404.253936] [<ffffffff810a50d8>] SyS_delete_module+0x198/0x2b0 [ 404.253949] [<ffffffff814850d9>] ? do_page_fault+0x9/0x10 [ 404.253961] [<ffffffff81489692>] system_call_fastpath+0x16/0x1b [ 404.253967] Code: 41 5c 41 5d 41 5e 41 5f c9 c3 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 49 89 fc 53 48 8b 87 88 00 00 00 4c 8b 37 48 85 c0 74 18 <48> 8b 78 78 4c 89 e2 be 02 00 00 00 48 81 c7 f8 00 00 00 e8 3b [ 404.254048] RIP [<ffffffff81334e5d>] device_del+0x1d/0x1d0 Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13mei: init: Flush scheduled work before resetting the deviceSamuel Ortiz
Flushing pending work items before resetting the device makes more sense than doing so afterwards. Some of them, like e.g. the NFC initialization one, find themselves with client IDs changed after the reset, eventually leading to trigger a client.c:mei_me_cl_by_id() warning after a few modprobe/rmmod cycles. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-12drivers/misc/sgi-gru/grufile.c: fix info leak in gru_get_config_info()Dan Carpenter
The "info.fill" array isn't initialized so it can leak uninitialized stack information to user space. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robin Holt <holt@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-07ASoC: atmel-ssc: prepare clk before calling enableBoris BREZILLON
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-06pch_phub: fix error return code in pch_phub_probe()Wei Yongjun
Error code had been assigned to retval in some error handling case but never use it, 0 is always returned in those case, this patch fix them to return a negative error code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06misc: replace strict_strtoul() with kstrtoul()Jingoo Han
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-05net: core: move mac_pton() to lib/net_utils.cAndy Shevchenko
Since we have at least one user of this function outside of CONFIG_NET scope, we have to provide this function independently. The proposed solution is to move it under lib/net_utils.c with corresponding configuration variable and select wherever it is needed. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-07 08:07:19 +0000