summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host
AgeCommit message (Collapse)Author
2012-11-07mmc: sdhci-s3c: fix the card detection in runtime-pmSeungwon Jeon
If host clock is disabled, host cannot detect a card in case of using CD internal for detection. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci-s3c: use clk_prepare_enable and clk_disable_unprepareThomas Abraham
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: constify dw_mci_idmac_ops in exynos back-endArnd Bergmann
The of_device_id match data is now marked as const and must not be modified. This changes the dw_mmc to mark all pointers passing the dw_mci_drv_data or dw_mci_dma_ops structures as const, and also marks the static definitions as const. drivers/mmc/host/dw_mmc-exynos.c: In function 'dw_mci_exynos_probe': drivers/mmc/host/dw_mmc-exynos.c:234:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: fix modular build for exynos back-endArnd Bergmann
The MODULE_DEVICE_TABLE entry for dw_mci_exynos_match was incorrectly copied from the platform back-end, which causes this error when building the driver as a loadable module: drivers/mmc/host/dw_mmc-exynos.c: At top level: drivers/mmc/host/dw_mmc-exynos.c:226:34: error: '__mod_of_device_table' aliased to undefined symbol 'dw_mci_pltfm_match' This patch fixes the problem by just using the correct string. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci: fix NULL dereference in sdhci_request() tuningChris Ball
Commit 473b095a72a9 ("mmc: sdhci: fix incorrect command used in tuning") introduced a NULL dereference at resume-time if an SD 3.0 host controller raises the SDHCI_NEEDS_TUNING flag while no card is inserted. Seen on an OLPC XO-4 with sdhci-pxav3, but presumably affects other controllers too. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: stable <stable@vger.kernel.org> [3.3+]
2012-11-07mmc: sdhci: fix IS_ERR() checking of regulator_get()Kevin Liu
There are two problems here: The check for vmmc was printing an unnecessary pr_info() when host->vmmc is NULL. The intent of the check for vqmmc was to only remove UHS if we have a regulator that doesn't support the required voltage, but since IS_ERR() doesn't catch NULL, we were actually removing UHS modes if vqmmc isn't present at all -- since it isn't present for most users, this breaks UHS for them. This patch fixes that UHS regression in 3.7-rc1. Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Bin Wang <binw@marvell.com> Reviewed-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: fix sdhci-dove probe/removalRussell King - ARM Linux
1. Never ever publish a device in the system before it has been setup to a usable state. 2. Unregister the device _BEFORE_ taking away any resources it may be using. 3. Don't check clks against NULL. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sh_mmcif: fix use after freeGuennadi Liakhovetski
A recent commit "mmc: sh_mmcif: fix clock management" has introduced a use after free bug in sh_mmcif.c: in sh_mmcif_remove() the call to mmc_free_host() frees private driver data, therefore using it afterwards is a bug. Revert that hunk. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: stable@vger.kernel.org [3.6] Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci-pci: fix 'Invalid iomem size' error message conditionAdrian Hunter
The SDHCI standard defines a 256 byte register set but a device that specifies a larger iomem region is not an error. Alter the message condition accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: mxcmmc: Fix MODULE_ALIASFabio Estevam
The correct name for the driver is "mxc-mmc". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: omap_hsmmc: fix NULL pointer dereference for dt bootBalaji T K
dev->platform_data is NULL in case of device tree boot, instead use the saved version in struct omap_hsmmc_host. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: omap_hsmmc: fix host reference after mmc_free_hostBalaji T K
struct omap_hsmmc_host *host should not be accessed after mmc_free_host(). Reorder mmc_free_host() after iounmap(host->base). Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: fix multiple drv_data NULL dereferencesJames Hogan
800d78bfccb3d ("mmc: dw_mmc: add support for implementation specific callbacks") -- merged in v3.7-rc1 -- introduced multiple NULL pointer dereferences when the default dw_mci_pltfm_probe() is used, as it sets host->drv_data to NULL, and that's only checked against NULL in 1 out of the 7 cases where it is dereferenced. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: enable controller interrupt before calling mmc_start_hostYuvaraj CD
As mmc_start_host is getting called before enabling the dw_mmc controller interrupt, there is a problem of missing the SDMMC_INT_CMD_DONE for the very first command sent by the sdio_reset. This problem occurs only when we disable MMC debugging i.e, MMC_DEBUG=n. This patch enables the dw_mmc controller interrupt before mmc_start_host. Signed-off-by: Yuvaraj CD <yuvaraj.cd@samsung.com> Reviewed-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci-of-esdhc: disable CMD23 for some Freescale SoCsJerry Huang
CMD23 causes lots of errors in kernel on some freescale SoCs (P1020, P1021, P1022, P1024, P1025 and P4080) when MMC card used, which is because these controllers does not support CMD23, even on the SoCs which declares CMD23 is supported. Therefore, we'll not use CMD23. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: remove _dev_info compile warningSeungwon Jeon
This patch removes the following warning. drivers/mmc/host/dw_mmc.c:1976: warning: passing argument 1 of '_dev_info' from incompatible pointer type Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-11mmc: mxs-mmc: Fix merge issue causing build errorMarek Vasut
The following error appeared due to a merge problem; the patches: fc108d24 "mmc: mxs-mmc: fix deadlock caused by recursion loop" 829c1bf4 "mmc: spi: Pull out parts shared between MMC and SPI" came in through separate branches and cause this build error when combined. drivers/mmc/host/mxs-mmc.c: In function 'mxs_mmc_enable_sdio_irq': drivers/mmc/host/mxs-mmc.c:527:3: error: 'struct mxs_mmc_host' has no member named 'base' drivers/mmc/host/mxs-mmc.c:527:3: error: 'struct mxs_mmc_host' has no member named 'devid' make[3]: *** [drivers/mmc/host/mxs-mmc.o] Error 1 This patch corrects the issue. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-11Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC fixes from Olof Johansson: "A series of fixes (and in some cases, some cleanups): Via Tony Lindgren: - A collection of OMAP regression fixes, in particular because firmware no longer sets up all pin states before starting the kernel. - cpufreq fixes for OMAP (Rafael is on vacation and this was pre-agreed). - A longer series of misc regression fixes and cleanups, warning removals, etc for OMAP From Arnd Bergmann: - A series of warning fixes for various platforms (defconfig builds) Misc: - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: pxa: armcore: fix PCI PIO warnings ARM: integrator: use __iomem pointers for MMIO, part 2 ARM: assabet: fix bogus warning in get_assabet_scr (again) ARM: shmobile: mark shmobile_init_late as __init ARM: integrator_cp: fix build failure ARM: OMAP4/AM335x: hwmod: fix disable_module regression in hardreset handling ARM: OMAP3: fix workaround for EMU clockdomain arm/omap: Replace board_ref_clock with enum values ARM: OMAP2+: remove duplicated include from board-omap3stalker.c arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon arch/arm/mach-omap2: Remove unecessary semicolon arch/arm/mach-omap1/devices.c: Remove unecessary semicolon ARM/dts: omap5-evm: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap4-panda: Disable unused audio IPs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ...
2012-10-10Merge tag 'mmc-merge-for-3.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "Core: - Add DT properties for card detection (broken-cd, cd-gpios, non-removable) - Don't poll non-removable devices - Fixup/rework eMMC sleep mode/"power off notify" feature - Support eMMC background operations (BKOPS). To set the one-time programmable fuse that enables bkops on an eMMC that doesn't already have it set, you can use the "mmc bkops enable" command in: git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git Drivers: - atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree support - bfin_sdh: Add support for the controller in bf60x - dw_mmc: Support Samsung Exynos SoCs - eSDHC: Add ADMA support - sdhci: Support testing a cd-gpio (from slot-gpio) instead of presence bit - sdhci-pltfm: Support broken-cd DT property - tegra: Convert to only supporting DT (mach-tegra has gone DT-only)" * tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (67 commits) mmc: core: Fixup broken suspend and eMMC4.5 power off notify mmc: sdhci-spear: Add clk_{un}prepare() support mmc: sdhci-spear: add device tree bindings mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirks mmc: dt: Support "broken-cd" property in sdhci-pltfm mmc: sdhci-s3c: fix the wrong number of max bus clocks mmc: sh-mmcif: avoid oops on spurious interrupts mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ mmc: sdhci-s3c: Fix crash on module insertion for second time mmc: sdhci-s3c: Enable only required bus clock mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration" mmc: mxcmmc: fix bug that may block a data transfer forever mmc: omap_hsmmc: Pass on the suspend failure to the PM core mmc: atmel-mci: AP700x PDC is not connected to MCI mmc: atmel-mci: DMA can be used with other controllers mmc: mmci: use clk_prepare_enable and clk_disable_unprepare mmc: sdhci-s3c: Add device tree support mmc: dw_mmc: add support for exynos specific implementation of dw-mshc ...
2012-10-07mmc: core: Fixup broken suspend and eMMC4.5 power off notifyUlf Hansson
This patch fixes up the broken suspend sequence for eMMC with sleep support. Additionally it reworks the eMMC4.5 Power Off Notification feature so it fits together with the existing sleep feature. The CMD0 based re-initialization of the eMMC at resume is re-introduced to maintain compatiblity for devices using sleep. A host shall use MMC_CAP2_POWEROFF_NOTIFY to enable the Power Off Notification feature. We might be able to remove this cap later on, if we think that Power Off Notification always is preferred over sleep, even if the host is not able to cut the eMMC VCCQ power. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Saugata Das <saugata.das@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: sdhci-spear: Add clk_{un}prepare() supportViresh Kumar
clk_{un}prepare is mandatory for platforms using common clock framework. Since this driver is used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: sdhci-spear: add device tree bindingsViresh Kumar
This adds simple DT bindings for SDHCI SPEAr controller. It uses cd-gpios from common mmc bindings. This also fixes spear300-evb.dts with correct name for card detect binding. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resumeChander Kashyap
Perform clock disable/enable in runtime suspend/resume. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirksChris Ball
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: dt: Support "broken-cd" property in sdhci-pltfmChris Ball
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: sdhci-s3c: fix the wrong number of max bus clocksJaehoon Chung
We can use up to four bus-clocks; but on module remove, we didn't disable the fourth bus clock. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07ARM: tegra: fix mismerges of header file inclusionsOlof Johansson
Another mishandled merge conflict by me, where the header file renames and the removal of gpio includes clashed and I chose the wrong end result. Fixes build breakage for tegra_defconfig. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-06sections: fix section conflicts in drivers/mmcAndi Kleen
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-03mmc: sh-mmcif: avoid oops on spurious interruptsGuennadi Liakhovetski
On some systems, e.g., kzm9g, MMCIF interfaces can produce spurious interrupts without any active request. To prevent the Oops, that results in such cases, don't dereference the mmc request pointer until we make sure, that we are indeed processing such a request. Reported-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQGuennadi Liakhovetski
Upon completion of a MMC_WRITE_MULTIPLE_BLOCK command MMCIF issues an IRQ with the DTRANE bit set and often with one or several of CMD12 bits set. If those interrupts are not acknowledged, an additional interrupt can be produced and will be delivered later, possibly, when the transaction has already been completed. To prevent this from happening, CMD12 completion interrupt sources have to be cleared too upon reception of an DTRANE IRQ. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: sdhci-s3c: Fix crash on module insertion for second timeChander Kashyap
If sdhci-s3c driver is built as module, it gives following error if inserted again after removing. This was happening as pm_runtime_use_autosuspend() is called in sdhci_s3c_probe() function but in sdhci_s3c_remove() its complementary pm_runtime_dont_use_autosuspend() is not called. BUG: spinlock bad magic on CPU#1, insmod/955 lock: 0xee771368, .magic: 00000000, .owner: insmod/955, .owner_cpu: 1 [<c00147e0>] (unwind_backtrace+0x0/0xf8) from [<c0136b40>] (do_raw_spin_unlock+0xa4/0xe4) [<c0136b40>] (do_raw_spin_unlock+0xa4/0xe4) from [<c01be508>] (_raw_spin_unlock_irqrestore+0xc/0x38) [<c01be508>] (_raw_spin_unlock_irqrestore+0xc/0x38) from [<c01a9334>] (sdhci_runtime_suspend_host+0x54/0x80) [<c01a9334>] (sdhci_runtime_suspend_host+0x54/0x80) from [<bf0060a8>] (sdhci_s3c_runtime_suspend+0x14/0x38 [sdhci_s3c]) [<bf0060a8>] (sdhci_s3c_runtime_suspend+0x14/0x38 [sdhci_s3c]) from [<c016cb00>] (pm_generic_runtime_suspend+0x2c/0x40) [<c016cb00>] (pm_generic_runtime_suspend+0x2c/0x40) from [<c0170090>] (__rpm_callback+0x70/0x98) [<c0170090>] (__rpm_callback+0x70/0x98) from [<c01703f0>] (rpm_suspend+0xf0/0x534) [<c01703f0>] (rpm_suspend+0xf0/0x534) from [<c0171670>] (__pm_runtime_suspend+0x5c/0x74) [<c0171670>] (__pm_runtime_suspend+0x5c/0x74) from [<c016d018>] (pm_generic_runtime_idle+0x44/0x4c) [<c016d018>] (pm_generic_runtime_idle+0x44/0x4c) from [<c0170090>] (__rpm_callback+0x70/0x98) [<c0170090>] (__rpm_callback+0x70/0x98) from [<c0170984>] (rpm_idle+0xdc/0x18c) [<c0170984>] (rpm_idle+0xdc/0x18c) from [<c0171608>] (pm_runtime_set_autosuspend_delay+0x30/0x3c) [<c0171608>] (pm_runtime_set_autosuspend_delay+0x30/0x3c) from [<bf0069c4>] (sdhci_s3c_probe+0x35c/0x52c [sdhci_s3c]) [<bf0069c4>] (sdhci_s3c_probe+0x35c/0x52c [sdhci_s3c]) from [<c016a014>] (platform_drv_probe+0x18/0x1c) Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: sdhci-s3c: Enable only required bus clockChander Kashyap
In case of multiple bus clock sources, all the clock sources were getting enabled. As only one clock source is needed at the time hence enable only the required bus clock. This patch does as follows: 1. In sdhci_s3c_probe enable only required bus clock source. 2. Handle the disabling of old bus clock and enables the best clock selected in sdhci_s3c_set_clock(). Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration"Seungwon Jeon
This reverts commit 94c6cee91 (Add check for IDMAC configuration). Synopsys says that only if internal dmac is not present, optional external dma interface is present. When internal dmac is present, '0' value in DMA_INTERFACE of HCON is reasonable. DMA_INTERFACE indicates external dma interface. And idmac initialization is prohibited now. The commit should be reverted since: the check for IDMAC is not reliable; falling back to PIO would provide awful performance; we wouldn't expect to see instances of this block without DMA support. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: mxcmmc: fix bug that may block a data transfer foreverJavier Martin
The problem can be easily reproduced using a script that loops copying a file in an SD card to another place in the same SD card and its related to read transfers. This only happens with DMA enabled. This is related to the fact that, when reading, an MMC irq signals the fact that all data from the SD card has been copied to the internal buffers. However, it doesn't signal whether the DMA transfer that is in charge of moving data from these internal buffers to RAM has finished or not. Thus, calling dmaengine_terminate_all() in the MMC irq routine can cancel an ongoing DMA transfer leaving some data in the internal buffers that produces an accumulative effect which, in the end, blocks a read data transfer forever. The following patch watches DMA irq for reading and MMC irqs for writing transfers. The 'dangerous' usage of dmaengine_terminate_all() is removed and a timeout of 10 seconds is added so that the MMC won't block forever anymore. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: omap_hsmmc: Pass on the suspend failure to the PM coreVaibhav Bedia
In some cases mmc_suspend_host() is not able to claim the host and proceed with the suspend process. The core returns -EBUSY to the host controller driver. Unfortunately, the host controller driver does not pass on this information to the PM core and hence the system suspend process continues. ret = mmc_suspend_host(host->mmc); if (ret) { host->suspended = 0; if (host->pdata->resume) { ret = host->pdata->resume(dev, host->slot_id); The return status from mmc_suspend_host() is overwritten by return status from host->pdata->resume. So the original return status is lost. In these cases the MMC core gets to an unexpected state during resume and multiple issues related to MMC crop up. 1. Host controller driver starts accessing the device registers before the clocks are enabled which leads to a prefetch abort. 2. A file copy thread which was launched before suspend gets stuck due to the host not being reclaimed during resume. To avoid such problems pass on the -EBUSY status to the PM core from the host controller driver. With this change, MMC core suspend might still fail but it does not end up making the system unusable. Suspend gets aborted and the user can try suspending the system again. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by: Venkatraman S <svenkatr@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: atmel-mci: AP700x PDC is not connected to MCIHein_Tibosch
Earlier, atmel-mci was adapted to make use of the peripheral DMA controller (PDC), in case normal DMA wouldn't work. ( http://comments.gmane.org/gmane.linux.kernel.mmc/9403 ) This works OK on ARM platforms (AT91), but it broke the driver for AVR32, the AP700x. Although the MCI has PDC support, the connection is not done for AVR chips. This patch makes the use of PDC depend on !CONFIG_AVR32. Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: atmel-mci: DMA can be used with other controllersHein_Tibosch
After the latest changes to atmel-mci, it could not be used with DMA on the AVR32 platform. This patch will allow to use DMA again and it will avoid access to MCI register ATMCI_DMA. Even if the IP version is lower than v3xx and doesn't have the DMA configuration register, DMA transfers can be used with a different controller than the Atmel AHB DMA one. For instance, some AVR chips use the Synopsys DesignWare AHB DMA controller. Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: mmci: use clk_prepare_enable and clk_disable_unprepareJulia Lawall
clk_prepare_enable and clk_disable_unprepare combine clk_prepare and clk_enable, and clk_disable and clk_unprepare. They make the code more concise, and ensure that clk_unprepare is called when clk_enable fails. A simplified version of the semantic patch that introduces calls to these functions is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ - clk_prepare(e); - clk_enable(e); + clk_prepare_enable(e); @@ expression e; @@ - clk_disable(e); - clk_unprepare(e); + clk_disable_unprepare(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: sdhci-s3c: Add device tree supportThomas Abraham
Add device tree based discovery support for Samsung's sdhci controller. Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: add support for exynos specific implementation of dw-mshcThomas Abraham
Samsung Exynos SoC's extend the dw-mshc controller for additional clock and bus control. Add support for these extensions and include provide device tree based discovery suppory as well. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: add support for implementation specific callbacksThomas Abraham
The core dw-mshc controller driver can let platform specific implementations of the dw-mshc controller to control the hardware as required by such implementations. This is acheived by invoking implementation specific (optional) callbacks. Define the list of callbacks supported the add invocation points for the same. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: prepare functions in dw_mmc-pltfm for reuseThomas Abraham
Platform implementations of dw-mshc controller may choose to extend the features of the standard dw-mshc controller such as adding additional clocking options or modifying the bus interface. Support for such implementation specific extensions can be incorporated into dw_mmc-pltfm, but including multiple such platform specific implementations would convolute the existing dw_mmc-pltfm code. Instead, it would be better to create implementation specific platform drivers to support implementation specific features. Such platforms drivers can reuse the existing infrastructure in dw_mmc-pltfm for resource identification and controller registration and provide support for implementation specific features. So, allow the infrastructure in dw_mmc-pltfm to be reused by other implementation specific platform drivers. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: add device tree supportThomas Abraham
Add device tree based discovery support. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: add quirk to indicate missing write protect lineThomas Abraham
If the write protect pad of the controller is not connected to the write protect pin of the slot, the driver should be notified of this condition so that incorrect check for write protection by reading the WRTORT register can avoided. The get_ro platform callback can be used for in such cases, but with device tree support enabled, such platform callbacks cannot be supported. Add a new quirk for notifying the driver about the missing write protect line so the driver can assume that the card write protection is disabled. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: lookup for optional biu and ciu clocksThomas Abraham
Some platforms allow for clock gating and control of bus interface unit clock and card interface unit clock. Add support for clock lookup of optional biu and ciu clocks for clock gating and clock speed determination. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: allow probe to succeed even if one slot is initializedThomas Abraham
Instead of aborting the probe when a slot initialization fails, allow initialization of as many slots as possible. If there is at least one instance of a slot that is successfully initialized, allow the driver probe to succeed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: Use devm_* functions in dw_mmc platform driverThomas Abraham
Use devm_* managed functions for simpler error handling. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: convert copy of struct device in struct dw_mci to a referenceThomas Abraham
The 'struct dw_mci' maintains a copy of the pdev->dev instance instead of maintaining a reference to that 'struct device' instance. Any resource allocated using the device resource management kernel API with the instance of 'struct device' in 'struct dw_mci' is then incorrect. Fix this by converting the copy of 'struct device' in 'struct dw_mci' to a reference. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-02Merge tag 'spi-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi updates from Mark Brown: "No framework work here, only a bunch of driver updates of varying sizes: - Factoring out of the core hardware support from the MXS MMC driver by Marek Vasut to allow the hardware to also be used for SPI. - Lots of error handling cleanups from Guenter Roeck - Removal of the existing Tegra driver which is quite comprehensively broken as detailed in the changelog for the removal. - DT suppport for the PL022 and GPIO drivers. - pinctrl support for OMAP and PL022." Pulling from Mark Brown as Grant Likely is still busy moving. * tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (53 commits) spi: remove completely broken Tegra driver spi/imx: set the inactive state of the clock according to the clock polarity spi/pl022: get/put resources on suspend/resume spi/pl022: use more managed resources spi/pl022: Devicetree support w/o platform data spi/s3c64xx: Don't free controller_data on non-dt platforms spi: omap2-mcspi: add pinctrl support spi/pl022: adopt pinctrl support spi: omap2-mcspi: Cleanup the omap2_mcspi_txrx_dma function spi/gpio: Fix stub for spi_gpio_probe_dt() spi/mxs: Make the SPI block clock speed configurable via DT spi: spi-sh-hspi: drop frees of devm_ alloc'd data spi/pl022: Fix chipselects pointer computation spi: spi-tle62x0: Use module_spi_driver macro mxs/spi: Rework the mxs_ssp_timeout to be more readable mxs/spi: Decrement the DMA/PIO border mxs/spi: Increment the transfer length only if transfer succeeded mxs/spi: Fix issues when doing long continuous transfer spi: spi-gpio: Add DT bindings spi: spi-gpio: store chipselect information in private structure ...
2012-10-01Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-16 19:47:17 +0000