summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2011-07-27mmc: sdhci-esdhc-imx: add device tree probe supportShawn Guo
The patch adds device tree probe support for sdhci-esdhc-imx driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Chris Ball <cjb@laptop.org> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Chris Ball <cjb@laptop.org>
2011-07-27mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_hostShawn Guo
Neither platform based nor dt based device needs to pass the parent to sdhci_alloc_host. There is no difference between platform and dt on this point. The patch makes the change to pass device itself than its parent to sdhci_alloc_host for dt case too. Otherwise the probe function of sdhci based drivers which is shared between platform and dt will fail on dt case. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Chris Ball <cjb@laptop.org>
2011-07-27mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()Shawn Guo
The patch removes all the uses of cpu_is_mx(). Instead, it utilizes platform_device_id to distinguish the esdhc differences among SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Chris Ball <cjb@laptop.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Chris Ball <cjb@laptop.org>
2011-07-27mmc: sdhci-esdhc-imx: do not reference platform data after probeShawn Guo
The patch copies platform data into pltfm_imx_data and reference the data there than platform data after probe. This work is inspired by Grant Likely and Troy Kisky. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Chris Ball <cjb@laptop.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Chris Ball <cjb@laptop.org>
2011-07-27mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5Shawn Guo
The patch extends card_detect and write_protect support to get mx5 family and more scenarios supported. The changes include: * Turn platform_data from optional to mandatory * Add cd_types and wp_types into platform_data to cover more use cases * Remove the use of flag ESDHC_FLAG_GPIO_FOR_CD * Adjust some machine codes to adopt the platform_data changes * Work around the issue that software reset will get card detection circuit stop working With this patch, card_detect and write_protect gets supported on mx5 based platforms. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Chris Ball <cjb@laptop.org>
2011-07-26MMC / TMIO: Fix build issue related to struct scatterlistRafael J. Wysocki
Fix build issue caused by undefined struct scatterlist in drivers/mmc/host/tmio_mmc.c. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25Merge 'akpm' patch seriesLinus Torvalds
* Merge akpm patch series: (122 commits) drivers/connector/cn_proc.c: remove unused local Documentation/SubmitChecklist: add RCU debug config options reiserfs: use hweight_long() reiserfs: use proper little-endian bitops pnpacpi: register disabled resources drivers/rtc/rtc-tegra.c: properly initialize spinlock drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time() drivers/rtc: add support for Qualcomm PMIC8xxx RTC drivers/rtc/rtc-s3c.c: support clock gating drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200 init: skip calibration delay if previously done misc/eeprom: add eeprom access driver for digsy_mtc board misc/eeprom: add driver for microwire 93xx46 EEPROMs checkpatch.pl: update $logFunctions checkpatch: make utf-8 test --strict checkpatch.pl: add ability to ignore various messages checkpatch: add a "prefer __aligned" check checkpatch: validate signature styles and To: and Cc: lines checkpatch: add __rcu as a sparse modifier checkpatch: suggest using min_t or max_t ... Did this as a merge because of (trivial) conflicts in - Documentation/feature-removal-schedule.txt - arch/xtensa/include/asm/uaccess.h that were just easier to fix up in the merge than in the patch series.
2011-07-25notifiers: pm: move pm notifiers into suspend.hAmerigo Wang
It is not necessary to share the same notifier.h. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: David Miller <davem@davemloft.net> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-25Merge branch 'next/fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (35 commits) ARM: msm: platsmp: determine number of CPU cores at boot time ARM: Tegra: Seaboard: Fix I2C bus numbering for ADT7461 ARM: Tegra: Trimslice: Tri-state DAP3 pinmux ARM: orion5x: fixup 5181 MPP mask check ARM: mxs-dma: include <linux/dmaengine.h> ARM: i.MX53: consistently use MX53_UART_PAD_CTRL for uart txd/rxd/rts/cts ARM: i.MX53: UARTn_CTS pin should not change RTS input select ARM: i.MX53: UARTn_TXD pin should not change RXD input select ARM: mx25: Fix typo on CAN1_RX pad setting iomux-mx53: add missing 'IOMUX_CONFIG_SION' for some I2C pad definitions ARM: NUC93X: add UL suffix to VMALLOC_END to ensure it is properly typed ARM: LPC32XXX: add UL suffix to VMALLOC_END to ensure it is properly typed ARM: CNS3XXX: add UL suffix to VMALLOC_END to ensure it is properly typed ARM: i.MX53: Fix IOMUX type o's ARM i.MX dma: Fix burstsize settings mach-mx5: fix the I2C clock parents ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0 ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.h ARM: mx53: Fix some interrupts marked as reserved. MXC: iomux-v3: correct NO_PAD_CTRL definition ... Fix up trivial conflict in arch/arm/mach-imx/mach-mx31_3ds.c
2011-07-24Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits) ARM: 7004/1: fix traps.h compile warnings ARM: 6998/2: kernel: use proper memory barriers for bitops ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM ARM: Fix build errors caused by adding generic macros ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU ARM: CPU hotplug: pass in proper affinity mask on IRQ migration ARM: GIC: avoid routing interrupts to offline CPUs ARM: CPU hotplug: fix abuse of irqdesc->node ARM: 6981/2: mmci: adjust calculation of f_min ARM: 7000/1: LPAE: Use long long printk format for displaying the pud ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence ARM: ARM_DMA_ZONE_SIZE is no more ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ...
2011-07-22Merge branches 'btc', 'dma', 'entry', 'fixes', 'linker-layout', 'misc', ↵Russell King
'mmci', 'suspend' and 'vfp' into for-next
2011-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1287 commits) icmp: Fix regression in nexthop resolution during replies. net: Fix ppc64 BPF JIT dependencies. acenic: include NET_SKB_PAD headroom to incoming skbs ixgbe: convert to ndo_fix_features ixgbe: only enable WoL for magic packet by default ixgbe: remove ifdef check for non-existent define ixgbe: Pass staterr instead of re-reading status and error bits from descriptor ixgbe: Move interrupt related values out of ring and into q_vector ixgbe: add structure for containing RX/TX rings to q_vector ixgbe: inline the ixgbe_maybe_stop_tx function ixgbe: Update ATR to use recorded TX queues instead of CPU for routing igb: Fix for DH89xxCC near end loopback test e1000: always call e1000_check_for_link() on e1000_ce4100 MACs. netxen: add fw version compatibility check be2net: request native mode each time the card is reset ipv4: Constrain UFO fragment sizes to multiples of 8 bytes virtio_net: Fix panic in virtnet_remove ipv6: make fragment identifications less predictable ipv6: unshare inetpeers can: make function can_get_bittiming static ...
2011-07-21mmc: print debug messages for runtime PM actionsDaniel Drake
At http://www.mail-archive.com/linux-mmc@vger.kernel.org/msg08371.html (thread: "mmc: sdio: reset card during power_restore") we found and fixed a bug where mmc's runtime power management functions were not being called. We have now also made improvements to the SDIO powerup routine which could possibly mask this kind of issue in future. Add debug messages to the runtime PM hooks so that it is easy to verify if and when runtime PM is happening. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: fix runtime PM with -ENOSYS suspend caseOhad Ben-Cohen
In the case where a driver returns -ENOSYS from its suspend handler to indicate that the device should be powered down over suspend, the remove routine of the driver was not being called, leading to lots of confusion during resume. The problem is that runtime PM is disabled during this process, and when we reach mmc_sdio_remove, calling the runtime PM functions here (validly) return errors, and this was causing us to skip the remove function. Fix this by ignoring the error value of pm_runtime_get_sync(), which can return valid errors. This also matches the behaviour of pci_device_remove(). Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: at91_mci: move register header from include/ to drivers/Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: mxs-mmc: fix clock rate settingKoen Beel
Fix clock rate setting in the mxs-mmc driver. Previously, if div2 was 0 then the value for TIMING_CLOCK_RATE would have been 255 instead of 0. The limits for div1 (TIMING_CLOCK_DIVIDE) and div2 (TIMING_CLOCK_RATE+1) were also not correctly defined. Can easily be reproduced on mx23evk: default clock for high speed sdio cards is 50 MHz. With a SSP_CLK of 28.8 MHz default), this resulted in an actual clock rate of about 56 kHz. Tested on mx23evk. Signed-off-by: Koen Beel <koen.beel@barco.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: tmio: fix a deadlockGuennadi Liakhovetski
Currently the tmio-mmc driver contains a recursive runtime PM method invocation, which leads to a deadlock on a mutex. Avoid it by taking care not to request DMA too early. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: tmio: fix a recently introduced bug in DMA codeGuennadi Liakhovetski
A recent commit "mmc: tmio: Share register access functions" has swapped arguments of a macro and broken DMA with TMIO MMC. This patch fixes the arguments back. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: sh_mmcif: maximize power savingGuennadi Liakhovetski
This patch uses runtime PM to allow the system to power down the MMC controller, when the MMC closk is switched off. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: tmio: maximize power savingGuennadi Liakhovetski
This patch uses runtime PM to allow the system to power down the MMC controller, when the MMC closk is switched off. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: tmio: fix recursive spinlock, don't schedule with interrupts disabledGuennadi Liakhovetski
Calling mmc_request_done() under a spinlock with interrupts disabled leads to a recursive spin-lock on request retry path and to scheduling in atomic context. This patch fixes both these problems by moving mmc_request_done() to the scheduler workqueue. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb()Adrian Hunter
In the case of an I/O error, the DMA will have been cleaned up in the MMC interrupt and the request structure pointer will be null. In that case, it is essential to check if the DMA is over before dereferencing host->mrq->data. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: omap_hsmmc: refactor duplicated codeAndy Shevchenko
There are a few places with the same functionality. This patch creates two functions omap_hsmmc_set_bus_width() and omap_hsmmc_set_bus_mode() to do the job. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: omap_hsmmc: fix a few bugs when setting the clock divisorAndy Shevchenko
There are two pieces of code which are similar, but not the same. Each of them contains a bug. The SYSCTL register should be read before writing to it in omap_hsmmc_context_restore() to retain the state of the reserved bits. Before setting the clock divisor and DTO bits the value from the SYSCTL register should be masked properly. We were lucky to have no problems with DTO bits. So, make sure we have clear DTO bits properly in omap_hsmmc_set_ios(). Additionally get rid of msleep(1). The actual time is rarely higher than 30us on OMAP 3630. The resulting pieces of code are refactored into the omap_hsmmc_set_clock() function. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: omap_hsmmc: introduce start_clock and re-use stop_clockAndy Shevchenko
There is similar code in two functions which enable the clock. Refactor this code to omap_hsmmc_start_clock(). Re-use omap_hsmmc_stop_clock() in omap_hsmmc_context_restore() as well. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: omap_hsmmc: split duplicate code to calc_divisor() functionAndy Shevchenko
There are two places where the same calculations are done. Let's split them into a separate function. In addition, simplify by using the DIV_ROUND_UP kernel macro. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: omap_hsmmc: move hardcoded frequency constants to definesAndy Shevchenko
Move the min and max frequency constants to the definition block in the source file. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: omap_hsmmc: correct debug report error status mnemonicsAdrian Hunter
CERR and BADA were in the wrong place and there are only 32 not 35. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Reviewed-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: block: fixed NULL pointer dereferenceJaehoon Chung
We already check for ongoing async transfers when handling discard requests, but not in mmc_blk_issue_flush(). This patch fixes that omission. Tested with an SDHCI controller and eMMC4.41. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Per Forlin <per.forlin@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: omap_hsmmc: Remove unused iclkBalaji T K
After runtime conversion to handle clk, iclk node is not used. However fclk node is still used to get clock rate. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: omap_hsmmc: add runtime pm supportBalaji T K
* Add runtime pm support to HSMMC host controller. * Use runtime pm API to enable/disable HSMMC clock. * Use runtime autosuspend APIs to enable auto suspend delay. Based on OMAP HSMMC runtime implementation by Kevin Hilman and Kishore Kadiyala. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: omap_hsmmc: Remove lazy_disableBalaji T K
lazy_disable framework in OMAP HSMMC manages multiple low power states and card is powered off after inactivity time of 8 seconds. Based on previous discussion on the list, card power (regulator) handling (when to power OFF/ON) should ideally be handled by core layer. Remove usage of lazy disable to allow core layer _only_ to handle card power. With the removal of lazy disable framework, MMC regulators are left ON until MMC_POWER_OFF via set_ios. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: core: Set non-default Drive Strength via platform hookPhilip Rakity
Non default Drive Strength cannot be set automatically. It is a function of the board design and only if there is a specific platform handler can it be set. The platform handler needs to take into account the board design. Pass to the platform code the necessary information. For example: The card and host controller may indicate they support HIGH and LOW drive strength. There is no way to know what should be chosen without specific board knowledge. Setting HIGH may lead to reflections and setting LOW may not suffice. There is no mechanism (like ethernet duplex or speed pulses) to determine what should be done automatically. If no platform handler is defined -- use the default value. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: block: add handling for two parallel block requests in issue_rw_rqPer Forlin
Change mmc_blk_issue_rw_rq() to become asynchronous. The execution flow looks like this: * The mmc-queue calls issue_rw_rq(), which sends the request to the host and returns back to the mmc-queue. * The mmc-queue calls issue_rw_rq() again with a new request. * This new request is prepared in issue_rw_rq(), then it waits for the active request to complete before pushing it to the host. * When the mmc-queue is empty it will call issue_rw_rq() with a NULL req to finish off the active request without starting a new request. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: queue: add a second mmc queue request memberPer Forlin
Add an additional mmc queue request instance to make way for two active block requests. One request may be active while the other request is being prepared. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: block: move error path in issue_rw_rq to a separate function.Per Forlin
Break out code without functional changes. This simplifies the code and makes way for handling two parallel requests. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar<sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: block: add a block request prepare functionPer Forlin
Break out code from mmc_blk_issue_rw_rq to create a block request prepare function. This doesn't change any functionallity. This helps when handling more than one active block request. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: block: add member in mmc queue struct to hold request dataPer Forlin
The way the request data is organized in the mmc queue struct, it only allows processing of one request at a time. This patch adds a new struct to hold mmc queue request data such as sg list, request, blk request and bounce buffers, and updates any functions depending on the mmc queue struct. This prepares for using multiple active requests in one mmc queue. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: mmc_test: test to measure how sg_len affect performancePer Forlin
Add a test that measures how the mmc bandwidth depends on the numbers of sg elements in the sg list. The transfer size if fixed and sg length goes from a few up to 512. The purpose is to measure overhead caused by multiple sg elements. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: mmc_test: add test for non-blocking transfersPer Forlin
Add four tests for read and write performance per different transfer size, 4k to 4M. * Read using blocking mmc request * Read using non-blocking mmc request * Write using blocking mmc request * Write using non-blocking mmc request The host driver must support pre_req() and post_req() in order to run the non-blocking test cases. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar<sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: mmc_test: add debugfs file to list all testsPer Forlin
Add a debugfs file "testlist" to print all available tests. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar<sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: mmci: implement pre_req() and post_req()Per Forlin
pre_req() runs dma_map_sg() and prepares the dma descriptor for the next mmc data transfer. post_req() runs dma_unmap_sg. If not calling pre_req() before mmci_request(), mmci_request() will prepare the cache and dma just like it did it before. It is optional to use pre_req() and post_req() for mmci. Signed-off-by: Per Forlin <per.forlin@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: omap_hsmmc: add support for pre_req and post_reqPer Forlin
pre_req() runs dma_map_sg(), post_req() runs dma_unmap_sg. If not calling pre_req() before omap_hsmmc_request(), dma_map_sg will be issued before starting the transfer. It is optional to use pre_req(). If issuing pre_req(), post_req() must be called as well. Signed-off-by: Per Forlin <per.forlin@linaro.org> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: core: add non-blocking mmc request functionPer Forlin
Previously there has only been one function mmc_wait_for_req() to start and wait for a request. This patch adds: * mmc_start_req() - starts a request wihtout waiting If there is on ongoing request wait for completion of that request and start the new one and return. Does not wait for the new command to complete. This patch also adds new function members in struct mmc_host_ops only called from core.c: * pre_req - asks the host driver to prepare for the next job * post_req - asks the host driver to clean up after a completed job The intention is to use pre_req() and post_req() to do cache maintenance while a request is active. pre_req() can be called while a request is active to minimize latency to start next job. post_req() can be used after the next job is started to clean up the request. This will minimize the host driver request end latency. post_req() is typically used before ending the block request and handing over the buffer to the block layer. Add a host-private member in mmc_data to be used by pre_req to mark the data. The host driver will then check this mark to see if the data is prepared or not. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: kconfig: remove EXPERIMENTAL from the DMA selection of atmel-mciNicolas Ferre
This driver has been used for years with this option enabled. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: atmel-mci: add suspend/resume supportNicolas Ferre
Take care of slots while going to suspend state. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: sdhci-pci: allow 8-bit bus width for Intel Medfield eMMCsAdrian Hunter
Unless MMC_CAP_8_BIT_DATA is set, the bus width defaults to 4. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: sdhci-pci: add 8-bit bus width support for mrst hc0Major Lee
And hook platform_8bit_width to support 8-bit bus width. Signed-off-by: Major Lee <major_lee@wistron.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: dw_mmc: reset FIFO after an errorJames Hogan
If an error occurs mid way through a transaction (such as a missing CRC status response after the 2nd block written out of 3), then the FIFO may still contain data which will interfere with the next transaction. Therefore after an error has been detected, reset the fifo using the CTRL register. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 11:30:13 +0000