summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2009-05-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mvsdio: fix CONFIG_PM=y build mmci: fix crash with debug enabled sdhci: catch ADMA errors mmc: increase power up delay sdhci-pci: bad error handling in probe function mmc_block: be prepared for oversized requests
2009-05-03mvsdio: fix CONFIG_PM=y buildRabin Vincent
Fix usage of obsolete parameters and functions in the driver's PM callbacks. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03mmci: fix crash with debug enabledRabin Vincent
If MMC debugging is enabled, the mmci driver oopses because the DBG macro uses host->mmc before it is set. Set it earlier. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03sdhci: catch ADMA errorsPierre Ossman
We forgot to add the ADMA error bit to the list of data interrupts. Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03mmc: increase power up delayJosé M. Fernández
The TI controller on Toshiba Tecra M5 needs more time to power up or the cards will init incorrectly or not at all. Signed-off-by: José M. Fernández <josemariafg@gmail.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03sdhci-pci: bad error handling in probe functionDan Carpenter
The goto unmap is too early, we haven't allocated host or done the request_region(). Found by smatch (http://repo.or.cz/w/smatch.git). [ Second error path fix by Pierre Ossman ] Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03mmc_block: be prepared for oversized requestsPierre Ossman
The block layer does not support very low sector count restrictions so we need to be prepared to handle bigger requests than we can send directly to the controller. Problem found by Manuel Lauss. Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-04-23ARM: OMAP: MMC: Remove unused power_pinLadislav Michl
Remove unused power_pin Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-08mmc_spi: support for non-byte-aligned cardsWolfgang Muees
A very large subset of SD cards in the market send their responses and data non-byte-aligned. So add logic to the mmc spi driver to handle this mess. Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-04-08omap_hsmmc: Do not expect cmd/data to be non-null when CC/TC occursJarkko Lavinen
With spurious interrupt cmd can be null even when we have CC set in irq status. Fixes: NB#106295 - prevent potential kernel crash in the MMC driver Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-04-08mmc: Fix compile for omap_hsmmc.cTony Lindgren
This fixes the issue noted by Russell King: drivers/mmc/host/omap_hsmmc.c: In function 'mmc_omap_xfer_done': drivers/mmc/host/omap_hsmmc.c:301: error: implicit declaration of function 'mmc_omap_fclk_lazy_disable' This got broken by 4a694dc915c9a223044ce21fc0d99e63facd1d64. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-04-08mmc_spi: convert timeout handling to jiffies and avoid busy waitingWolfgang Muees
SD/MMC card timeouts can be very high. So avoid busy-waiting, using the scheduler. Calculate all timeouts in jiffies units, because this will give us the correct sign when to involve the scheduler. Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-04-08mmc_spi: do not check CID and CSD blocks with CRC16Wolfgang Muees
Some cards are not able to calculate a valid CRC16 value for CID and CSD reads (CRC for 512 byte data blocks is OK). By moving the CRC enable after the read of CID and CSD, these cards can be used. This patch was tested with a faulty 8 GByte takeMS Class 6 SDHC card. This patch was suggested by Pierre Ossman. Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-04-08omap_hsmmc: Flush posted write to IRQKevin Hilman
Spurious IRQs seen on MMC after 2.6.29. Flush posted write in IRQ handler. The interrupt line is released by clearing the error status bits in the MMCHS_STAT register, which must occur before the interrupt handler returns to avoid unwanted irqs. Hence the need to flush the posted write. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Tony Lindgen <tony@atomide.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-04-08New mail address for Pierre OssmanPierre Ossman
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-04-08imxmmc: move RSSR BLRPaulius Zaleckas
DMA request source (RSSR) needs to be set only once (in probe). DMA burst length (BLR) need to be set only in set_ios() This cleans up imxmci_setup_data() and should make it a little bit faster :) Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-04-08imxmmc: init-exit reworkPaulius Zaleckas
Add __init __exit for appropriate probe and remove functions. Conver to platform_driver_probe() Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-04-08mmc: Accept EXT_CSD rev 1.3 since it is backwards compatible with 1.2Jarkko Lavinen
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (42 commits) atmel-mci: fix sdc_reg typo tmio_mmc: add maintainer mmc: Add OpenFirmware bindings for SDHCI driver sdhci: Add quirk for forcing maximum block size to 2048 bytes sdhci: Add quirk for controllers that need IRQ re-init after reset sdhci: Add quirk for controllers that need small delays for PIO sdhci: Add set_clock callback and a quirk for nonstandard clocks sdhci: Add get_{max,timeout}_clock callbacks sdhci: Add support for hosts reporting inverted write-protect state sdhci: Add support for card-detection polling sdhci: Enable only relevant (DMA/PIO) interrupts during transfers sdhci: Split card-detection IRQs management from sdhci_init() sdhci: Add support for bus-specific IO memory accessors mmc_spi: adjust for delayed data token response omap_hsmmc: Wait for SDBP omap_hsmmc: Fix MMC3 dma omap_hsmmc: Disable SDBP at suspend omap_hsmmc: Do not prefix slot name omap_hsmmc: Allow cover switch to cause rescan omap_hsmmc: Add 8-bit bus width mode support ...
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (32 commits) regulator: twl4030 VAUX3 supports 3.0V regulator: Support disabling of unused regulators by machines regulator: Don't increment use_count for boot_on regulators twl4030-regulator: expose VPLL2 regulator: refcount fixes regulator: Don't warn if we failed to get a regulator regulator: Allow boot_on regulators to be disabled by clients regulator: Implement list_voltage for WM835x LDOs and DCDCs twl4030-regulator: list more VAUX4 voltages regulator: Don't warn on omitted voltage constraints regulator: Implement list_voltage() for WM8400 DCDCs and LDOs MMC: regulator utilities regulator: twl4030 voltage enumeration (v2) regulator: twl4030 regulators regulator: get_status() grows kerneldoc regulator: enumerate voltages (v2) regulator: Fix get_mode() for WM835x DCDCs regulator: Allow regulators to set the initial operating mode regulator: Suggest use of datasheet supply or pin names for consumers regulator: email - update email address and regulator webpage. ...
2009-04-01proc tty: switch sdio_uart to ->proc_fopsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-31MMC: regulator utilitiesDavid Brownell
Glue between MMC and regulator stacks ... verified with some OMAP3 boards using adjustable and configured-as-fixed regulators on several MMC controllers. These calls are intended to be used by MMC host adapters using at least one regulator per host. Examples include slots with regulators supporting multiple voltages and ones using multiple voltage rails (e.g. DAT4..DAT7 using a separate supply, or a split rail chip like certain SDIO WLAN or eMMC solutions). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-30trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-28Merge branch 'origin' into develRussell King
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-25Merge branch 'for-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2009-03-24mmc: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: drzeus-mmc@drzeus.cx Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-24atmel-mci: fix sdc_reg typoHans-Christian Egtvedt
This fixes a bug when setting the sdc_reg for 4-bit bus width transactions. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc: Add OpenFirmware bindings for SDHCI driverAnton Vorontsov
This patch adds a new driver: sdhci-of. The driver is similar to the sdhci-pci, it contains common probe code, and controller-specific ops and quirks. So far there are only Freescale eSDHC ops and quirks. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add quirk for forcing maximum block size to 2048 bytesAnton Vorontsov
FSL eSDHC controllers can support maximum block size up to 4096 bytes, the MBL (Maximum Block Length) field in the capabilities register extended by one bit, and is set to 0x3. But the SDHCI core doesn't support blocks of 4096 bytes, and thus forces blksz to the lowest value -- 512 bytes. With this patch we can pin up the blksz to the maximum supported block size, i.e. 2048 bytes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add quirk for controllers that need IRQ re-init after resetAnton Vorontsov
FSL eSDHC controllers losing signal/interrupt enable states after reset, so we should re-enable them. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add quirk for controllers that need small delays for PIOAnton Vorontsov
Small udelay is needed to make eSDHC work in PIO mode. Without the delay reading causes endless interrupt storm, and writing corrupts data. The first guess would be that we must wait for some bit in some register, but I didn't find any reliable bits that change before and after the delay. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add set_clock callback and a quirk for nonstandard clocksAnton Vorontsov
FSL eSDHC hosts have incompatible register map to manage the SDCLK. This patch adds set_clock callback so that drivers could overwrite set_clock behaviour. Similar patch[1] was posted by Ben Dooks, though in Ben's version the callback is named change_clock, plus the patch has some unrelated bits that makes the patch difficult to reuse. [1] http://lkml.org/lkml/2008/12/2/160 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add get_{max,timeout}_clock callbacksBen Dooks
Some controllers do not provide clock information in their capabilities (in the Samsung case, it is because there are multiple clock sources available to the controller). Add hooks to allow the system to supply clock information. p.s. In the original Ben's patch there was a bug that makes sdhci_add_host() return -ENODEV even if callbacks were specified. This is fixed now. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add support for hosts reporting inverted write-protect stateAnton Vorontsov
This patch adds SDHCI_QUIRK_INVERTED_WRITE_PROTECT quirk. When specified, the sdhci driver will invert WP state. p.s. Actually, the quirk is more board-specific than controller-specific. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add support for card-detection pollingAnton Vorontsov
This patch adds SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk. When specified, sdhci driver will set MMC_CAP_NEEDS_POLL MMC host capability, and won't enable card insert/remove interrupts. This is needed for hosts with unreliable card detection, such as FSL eSDHC. The original eSDHC driver was tring to "debounce" card-detection IRQs by reading present state and disabling particular interrupts. But with this debouncing scheme I noticed that sometimes we miss card insertion/removal events. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Enable only relevant (DMA/PIO) interrupts during transfersAnton Vorontsov
Some hosts (that is, FSL eSDHC) throw PIO interrupts during DMA transfers, this causes tons of unneeded interrupts, and thus highly degraded speed. This patch modifies the driver so that now we only enable relevant (DMA or PIO) interrupts during transfers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Split card-detection IRQs management from sdhci_init()Anton Vorontsov
Card detection interrupts should be handled separately as they should not be enabled before mmc_add_host() returns and should be disabled before calling mmc_remove_host(). The same is for suspend and resume routines. sdhci_init() no longer enables card-detection irqs. Instead, two new functions implemented: sdhci_enable_card_detection() and sdhci_disable_card_detection(). New sdhci_reinit() call implemented to behave the same way as the old sdhci_init(). Also, this patch implements and uses few new helpers to manage IRQs in a more conveinient way, that is: - sdhci_clear_set_irqs() - sdhci_unmask_irqs() - sdhci_mask_irqs() - SDHCI_INT_ALL_MASK constant sdhci_enable_sdio_irq() converted to these new helpers, plus the helpers will be used by the subsequent patches. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add support for bus-specific IO memory accessorsAnton Vorontsov
Currently the SDHCI driver works with PCI accessors (write{l,b,w} and read{l,b,w}). With this patch drivers may change memory accessors, so that we can support hosts with "weird" IO memory access requirments. For example, in "FSL eSDHC" SDHCI hardware all registers are 32 bit width, with big-endian addressing. That is, readb(0x2f) should turn into readb(0x2c), and readw(0x2c) should be translated to le16_to_cpu(readw(0x2e)). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc_spi: adjust for delayed data token responseWolfgang Muees
Some cards are not able to send the data token in time, but miss the time frame for some bits(!). So synchronize to the start of the token. Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Wait for SDBPAdrian Hunter
It is necessary to wait for bus power before sending any commands. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Fix MMC3 dmaGrazvydas Ignotas
Data transfers on third OMAP3 MMC controller don't work because DMA line numbers are only defined for MMC1 and MMC2. Fix that and store line numbers in mmc_omap_host structure to reduce code size. Tested on OMAP3 pandora board. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Disable SDBP at suspendJarkko Lavinen
Turn off the bus power at suspend. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Do not prefix slot nameAdrian Hunter
Allow slot_name to be the same as the other OMAP driver, by removing the redundant "slot:" prefix. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Allow cover switch to cause rescanAdrian Hunter
Allow a cover switch to be used to cause a rescan of the MMC slot. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Add 8-bit bus width mode supportJarkko Lavinen
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Implement scatter-gather emulationJuha Yrjola
Instead of using the bounce buffer, using scatter-gather emulation (as in the OMAP1/2 MMC driver) removes the need of one extra memory copy and improves performance. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Fix response type for busy after responseAdrian Hunter
Some MMC commands result in the card becoming busy after the response is received. This needs to be specified for the omap_hsmmc host controller, which is what this patch does. However, the effect is that some commands with no data will cause a Transfer Complete (TC) interrupt in addition to the Command Complete (CC) interrupt. In order to deal with that, the irq handler has needed a few changes also. The benefit of this change is that the omap_hsmmc host controller driver now waits for the TC interrupt while the card is busy, so the mmc_block driver needs to poll the card status just once instead of repeatedly. i.e. the net result is more sleep and less cpu. The command sequence for open-ended multi-block write with DMA is now: Issue write command CMD25 Receive CC interrupt Data is sent Receive TC interrupt (DMA is done) Issue stop command CMD12 Receive CC interrupt Card is busy Receive TC interrupt Card is now ready for next transfer Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Do dma cleanup also with data CRC errorsJarkko Lavinen
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-01 06:43:34 +0000