summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/devices
AgeCommit message (Collapse)Author
2013-04-05mtd: dataflash: Use of_match_ptr() macroSachin Kamat
This eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: merge mtdchar module with mtdcoreArtem Bityutskiy
The MTD subsystem has historically tried to be as configurable as possible. The side-effect of this is that its configuration menu is rather large, and we are gradually shrinking it. For example, we recently merged partitions support with the mtdcore. This patch does the next step - it merges the mtdchar module to mtdcore. And in this case this is not only about eliminating too fine-grained separation and simplifying the configuration menu. This is also about eliminating seemingly useless kernel module. Indeed, mtdchar is a module that allows user-space making use of MTD devices via /dev/mtd* character devices. If users do not enable it, they simply cannot use MTD devices at all. They cannot read or write the flash contents. Is it a sane and useful setup? I believe not. And everyone just enables mtdchar. Having mtdchar separate is also a little bit harmful. People sometimes miss the fact that they need to enable an additional configuration option to have user-space MTD interfaces, and then they wonder why on earth the kernel does not allow using the flash? They spend time asking around. Thus, let's just get rid of this module and make it part of mtd core. Note, mtdchar had additional configuration option to enable OTP interfaces, which are present on some flashes. I removed that option as well - it saves a really tiny amount space. [dwmw2: Strictly speaking, you can mount file systems on MTD devices just fine without the mtdchar (or mtdblock) devices; you just can't do other manipulations directly on the underlying device. But still I agree that it makes sense to make this unconditional. And Yay! we get to kill off an instance of checking CONFIG_foo_MODULE, which is an abomination that should never happen.] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: doc: use module_platform_driver_probe()Jingoo Han
This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: bcm47xxsflash: define opcodesRafał Miłecki
We need them to add erase/write support. This may duplicate some defines with bcma and/or ssb code, but it makes more sense to keep that in bcm47xxsflash which is supposed to work with both buses. Duplicated defines will be removed from ssb/bcma. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: bcm47xxsflash: store info about flash typeRafał Miłecki
It's going to be needed for erase and write operations, they differ between Atmel and ST flashes. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: bcm47xxsflash: keep a reference to the BCMARafał Miłecki
To implement erase and write support we need to "talk" with ChipCommon BCMA core which serial flash it attached to. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: devices: add const qualifiersArtem Bityutskiy
Be a bit stricter and add few more 'const' qualifiers. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: devices: elm: check for device's presence before configurationDaniel Mack
In case the driver is not probed - due to config mismatches or errors in the DTS files - dev_get_drvdata() returns NULL, leading to an Ooops during boot. Make elm_config() return an error in such cases to propagate the error up to the user, so it can fall back to software mode. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: m25p80: add entry for w25q128Rafał Miłecki
This device was reported over a year ago on OpenWrt mailing list in the thread [OpenWrt-Devel] RedBoot partition table with winbond m25q128vb (unfortunately, I can't find message id). Macpaul seemed to have problems with partition driver, but it seems the device was working OK. Reported-by: Macpaul Lin <macpaul@gmail.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: m25p80: add support for SST25VF064CKrzysztof Mazur
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: m25p80: introduce SST_WRITE flag for SST byte programmingKrzysztof Mazur
Not all SST devices implement the SST byte programming command. Some devices (like SST25VF064C) implement only standard m25p80 page write command. Now SPI flash devices that need sst_write() are explicitly marked with new SST_WRITE flag and the decision to use sst_write() is based on this flag instead of manufacturer id. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: m25p80: n25q064 is Micron, not Intel/NumonyxBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: doc: remove support for DoC 2000/2001/2001+Artem Bityutskiy
These drivers are deprecated for very long time, and we have a different driver for these called "diskonchip". Thus, kill the ancient cruft. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: nand: rename the id field of 'struct nand_flash_dev'Artem Bityutskiy
The 'id' is a bit confusing name because NAND IDs are multi-byte. Re-name it to 'dev_id' to make it clear that this is the "device ID" part (the second byte). While on it, clean-up the commentary for 'struct nand_flash_dev'. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: m25p80: add support for EON EN25QH256Daniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: m25p80: add support for Macronix MX66L51235LDaniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-03-02Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD update from David Woodhouse: "Fairly unexciting MTD merge for 3.9: - misc clean-ups in the MTD command-line partitioning parser (cmdlinepart) - add flash locking support for STmicro chips serial flash chips, as well as for CFI command set 2 chips. - new driver for the ELM error correction HW module found in various TI chips, enable the OMAP NAND driver to use the ELM HW error correction - added number of new serial flash IDs - various fixes and improvements in the gpmi NAND driver - bcm47xx NAND driver improvements - make the mtdpart module actually removable" * tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits) mtd: map: BUG() in non handled cases mtd: bcm47xxnflash: use pr_fmt for module prefix in messages mtd: davinci_nand: Use managed resources mtd: mtd_torturetest can cause stack overflows mtd: physmap_of: Convert device allocation to managed devm_kzalloc() mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement. mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional. mtd: atmel_nand: avoid to report an error when lookup table offset is 0. mtd: bcm47xxsflash: adjust names of bus-specific functions mtd: bcm47xxpart: improve probing of nvram partition mtd: bcm47xxpart: add support for other erase sizes mtd: bcm47xxnflash: register this as normal driver mtd: bcm47xxnflash: fix message mtd: bcm47xxsflash: register this as normal driver mtd: bcm47xxsflash: write number of written bytes mtd: gpmi: add sanity check for the ECC mtd: gpmi: set the Golois Field bit for mx6q's BCH mtd: devices: elm: Removes <xx> literals in elm DT node mtd: gpmi: fix a dereferencing freed memory error mtd: fix the wrong timeo for panic_nand_wait() ...
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-05Merge tag 'for-linus-20130204' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from David Woodhouse: "A small set of simple regression and build fixes for 3.8: - Fix a warning introduced in ONFI NAND probe - Fix commandline partition parsing - Require BITREVERSE for DiskOnChip G3 driver - Fix build failure for davinci_nand as module - Bump NFLASH_READY_RETRIES for bcm47xxnflash" * tag 'for-linus-20130204' of git://git.infradead.org/linux-mtd: mtd: nand: onfi don't WARN if we are in 16 bits mode mtd: physmap_of: fix cmdline partition method w/o linux, mtd-name mtd: docg3 fix missing bitreverse lib mtd: davinci_nand: fix modular build with CONFIG_OF=y mtd: bcm47xxnflash: increase NFLASH_READY_RETRIES
2013-02-04mtd: bcm47xxsflash: adjust names of bus-specific functionsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04mtd: bcm47xxsflash: register this as normal driverHauke Mehrtens
When platform_driver_probe() is used and no device is registered for this driver -ENODEV is returned and and error message is shown. Not all BCM47xx SoC have a serial flash chip controller and chip and for them an error message was shown. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04mtd: bcm47xxsflash: write number of written bytesHauke Mehrtens
The callback assumes the number of read bytes is written to retlen. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04mtd: devices: elm: Removes <xx> literals in elm DT nodePhilip Avinash
As part of removing generalized dependency, replace <xx> literal fields in DT compatible field with <52> for am335x platforms. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04mtd: bcm47xxsflash: add own struct for abstrating bus typeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-02-04mtd: chips: Add support for GigaDevice GD25Q32/GD25Q64 SPI Flash in m25p80.cMichel Stempin
Add support for GigaDevice GD25Q32 32 Mbit (4 MB) SPI Flash (see datasheet: http://www.gigadevice.com/UserFiles/GD25Q32_Rev0.2(1).pdf) used in Hame MPR-A1 and clones, and for GigaDevice GD25Q64 64 Mbit (8 MB) SPI Flash used in Hame MPR-A2 devices (datasheet: http://www.gigadevice.com/UserFiles/GD25Q64.pdf). Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04mtd: devices: elm: Add support for ELM error correctionPhilip Avinash
The ELM hardware module can be used to speedup BCH 4/8/16 ECC scheme error correction. For now only 4 & 8 bit support is added Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04mtd: m25p80: Flash protection support for STmicro chipsAustin Boyle
This patch adds generic support for flash protection on STmicro chips. On chips with less than 3 protection bits, the unused bits are don't cares and so can be written anyway. The lock function will only change the protection bits if it would not unlock other areas. Similarly, the unlock function will not lock currently unlocked areas. Tested on the m25p64. Signed-off-by: Austin Boyle <Austin.Boyle@aviatnet.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04mtd: docg3 fix missing bitreverse libRobert Jarzmik
Fix missing dependency which can cause a build error such as: ERROR: "byte_rev_table" [drivers/mtd/devices/docg3.ko] undefined! Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-01-25mtd: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15mtd: docg3 fix missing bitreverse libRobert Jarzmik
Fix missing dependency which can cause a build error such as: ERROR: "byte_rev_table" [drivers/mtd/devices/docg3.ko] undefined! Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-01-11drivers/mtd/devices: remove depends on CONFIG_EXPERIMENTALKees Cook
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: David Woodhouse <dwmw2@infradead.org> CC: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> CC: Robert Jarzmik <robert.jarzmik@free.fr> CC: Fabio Estevam <fabio.estevam@freescale.com> CC: Richard Weinberger <richard@nod.at> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2013-01-03Drivers: mtd: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-13mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.NeilBrown
If you create a block2mtd device that is larger than main memory, and write to all of it, then lots of pages will be dirtied but they will never be flushed out as nothing calls any variant of balance_dirty_pages. It would be nice to call set_page_dirty_balance(), but that isn't exported, so just call balance_dirty_pages_ratelimited() directly. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10mtg: docg3: potential divide by zero in doc_write_oob()Dan Carpenter
If we set oobdelta to zero then we will either return -EINVAL or hit a divide (modulus) by zero on the next line when we check "(ooblen % oobdelta)". It's better to just return -EINVAL here instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: m25p80: modify info for Micron N25Q128Liming Wang
Micron N25Q128 has two types of flash: - One is for 1.8v supply voltage, prefixed with "n25q128a11" and the jedec code is 0x20bb18. - Another is for 3v supply voltage, prefixed with "n25q128a13" and the jedec code is 0x20ba18. So modify the original type info and add another type for Micron N25Q128. Signed-off-by: Liming Wang <walimisdev@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22mtd: fix a number of checkpatch complaintsArtem Bityutskiy
While checking the "__devinit" removal patches with checkpatch.pl, I noticed several warnings related to a space between the function name and '(', as well as long lines. I fixed the warnings up in this patch. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22mtd: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22mtd: remove use of __devinitdataBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22mtd: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22mtd: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22mtd: m25p80: add support for the Winbond w25q80bl chipStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-16mtd: diskonchip: don't warn about ARM architectureArnd Bergmann
Enabling the diskonchip drivers on most architectures results in a pointless warning "#warning Unknown architecture for DiskOnChip. No default probe locations defined". The driver can in fact handle the default location already through the CONFIG_MTD_DOCPROBE_ADDRESS, which gets set on the platforms that need it, and we get a run-time error if this is not set correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: spear_smi: use module_platform_driver macroSrinivas Kandagatla
This patch removes some code duplication by using module_platform_driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: m25p80: add support for the windbond w25q256 chipMatthieu CASTET
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: m25p80: Make fast read configurable via DTMarek Vasut
Add DT property "m25p,fast-read" that signalises the particular chip supports "fast read" opcode. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-09mtd: slram: invalid checking of absolute end addressJiri Engelthaler
Fixed parsing end absolute address. Signed-off-by: Jiri Engelthaler <engycz@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-29mtd: m25p80: Disable 4KiB erase for s25sl032p, s25sl064pMarek Vasut
Quoting from the datasheet for S25FL064P, rev. 05, Nov 18 2011, § 9.17: "A 64 kB[sic] sector erase (D8h) command issued on 4 kB or 8 kB erase sectors will erase all sectors in the specified 64 kB region. However, please note that a 4 kB sector erase (20h) or 8 kB sector erase (40h) command will not work on a 64 kB sector." Referring further to Table 8.1 and Table 8.2, it is clearly seen that most of the sectors are 64KiB; therefore disable this 4KiB erase support since it's valid only on first/last sectors. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: basic (read only) driver for BCMA serial flashRafał Miłecki
This registers MTD driver for serial flash platform device. Right now it supports reading only, writing still has to be implemented. Artem: minor amendments. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: m25p80: add support for the EON EN25Q64 chipGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: m25p80: add support for Micron N25Q128Jan Luebbe
Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-15 00:01:29 +0000