summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/maps/physmap.c
AgeCommit message (Collapse)Author
2010-08-08mtd-physmap: add support users can assign the probe type in board filesBarry Song
There are three reasons to add this support: 1. users probably know the interface type of their flashs, then probe can be faster if they give the right type in platform data since wrong types will not be detected. 2. sometimes, detecting can cause destory to system. For example, for kernel XIP, detecting can cause NOR enter a mode instructions can not be fetched right, which will make kernel crash. 3. For a new probe which is not listed in the rom_probe_types, if users assign it in board files, physmap can still probe it. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02mtd: physmap: use resource_size()H Hartley Sweeten
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-04-20mtd/maps/physmap: catch failure to register MTD_PHYSMAP_COMPAT deviceH Hartley Sweeten
If the default Kconfig values are used with MTD_PHYSMAP_COMPAT you end up with a resource where end < start. This causes __request_resource to return a conflict which then returns an -EBUSY error code. The current physmap.c code just assumes that the platfom_device_register will always succeed. Catch this failure during the physmap_init and propogate the error. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30mtd: error return -EIO instead of EIORoel Kluin
Return a negative error value instead of a positive Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-21mtd: Fix compile failure and error path in physmap.cH Hartley Sweeten
Commit 4b56ffcacee937a85bf39e14872dd141e23ee85f ("mtd: Fix kernel NULL pointer dereference in physmap.c") introduced a couple of bugs. It neglected to run the loop of map_destroy() calls in physmap_flash_remove(), if !info->cmtd, which would happen if that function was called to clean up errors during probe. It also failed to compile if CONFIG_MTD_PARTITIONS was not defined. Reported-By: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-20mtd: Fix kernel NULL pointer dereference in physmap.cH Hartley Sweeten
During the probe for physmap platform flash devices there are a number error exit conditions that all do a goto err_out which then calls physmap_flash_remove(). In that function one of the cleanup steps is: #ifdef CONFIG_MTD_CONCAT if (info->cmtd != info->mtd[0]) mtd_concat_destroy(info->cmtd); #endif This test will succeed since info->cmtd == NULL and info->mtd[0] is valid. Fix this by exiting the remove function when info->cmtd == NULL. Also, cleanup the #ifdef CONFIG_MTD_PARTITIONS stuff by using mtd_has_partitions(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-26[MTD] Remove mtd->{suspend,resume} calls from board driversDavid Woodhouse
Now the MTD core will do this for us, we don't need to hook it up from the board drivers. Shame we can't do shutdown from the class too... Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04[MTD] support driver model updatesDavid Brownell
Follow-on patch to the previous driver model patch for the MTD framework. This one makes various MTD drivers connect to the driver model tree, so /sys/devices/virtual/mtd/* nodes are no longer present ... mostly drivers used on boards I have handy. Based on a patch from Kay Sievers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-10mtd: physmap: fix NULL pointer dereference in error pathAtsushi Nemoto
commit e480814f138cd5d78a8efe397756ba6b6518fdb6 ("[MTD] [MAPS] physmap: fix wrong free and del_mtd_{partition,device}") introduces a NULL pointer dereference in physmap_flash_remove when called from the error path in physmap_flash_probe (if map_probe failed). Call del_mtd_{partition,device} only if info->cmtd was not NULL. Reported-by: pHilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-14[MTD] [MAPS] physmap: fix wrong free and del_mtd_{partition,device}Atsushi Nemoto
commit 176bf2e0f10ecf1d20a97db3bd5bb2e6ba0b5668 ("physmap: fix leak of memory returned by parse_mtd_partitions") deals with a memory leak and frees the pointer array of mtd_partition after the call to add_mtd_partitions(). the problem is that mtd_table[x]->name still points to the freed memory. Aldo physmap_flash_remove() should call del_mtd_partitions() or del_mtd_device() only once. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Reported-by: Matthias Kaehlcke <matthias@kaehlcke.net> Tested-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-05[MTD] LPDDR extended physmap driver to support LPDDR flashAlexey Korolev
Physmap is a generic map driver for different platforms and flash types. We added support of LPDDR to physmap. All changes here are related to introduction of new pfow_base parameter. This parameter is valid in case of LPDDR chips only. Signed-off-by: Alexey Korolev <akorolev@infradead.org> Acked-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-23[MTD] struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10[MTD] physmap: fix leak of memory returned by parse_mtd_partitionsAtsushi Nemoto
The mtd partition parser returns an allocated pointer array of mtd_partition. The caller must free it. The array is used only for add_mtd_partitions(), so free it just after the call. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10[MTD] physmap: make physmap compat explicitMike Frysinger
The current method for always showing physmap compat address, size, and width is a bit confusing. If length is set to 0, then the address and width are still shown but silently unused. The physmap code itself already has logic which sets compat based on length, so just pull that out and into the Kconfig to make everything clear. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Bryan Wu <Bryan.Wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-26[MTD] physmap: fix memory leak on physmap_flash_remove by using devresAtsushi Nemoto
physmap_flash_remove releases only last memory region. This causes memory leak if multiple resources were provided. This patch fixes this leakage by using devm_ functions. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25[MTD] physmap: resume already suspended chips on failure to suspendUwe Kleine-König
A nice side effect of this patch is that the return value of physmap_flash_suspend in the error path is the value of the first failing suspend callback and not the bitwise OR of all of them. Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25[MTD] physmap: Fix suspend/resume/shutdown bugs.Robert Jarzmik
Don't call suspend/resume functions if they have not been defined. Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Acked-By: Jörn Engel <joern@logfs.org> Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-06-04MTD/JFFS2: remove CVS keywordsAdrian Bunk
Once upon a time, the MTD repository was using CVS. This patch therefore removes all usages of the no longer updated CVS keywords from the MTD code. This also includes code that printed them to the user. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [MAPS] fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable MTD mapping platform drivers, to re-enable auto loading. NOTE oddness with physmap ... it's a legacy driver in some configs, which means it can't always support hotplugging. (Not that most of these mapping drivers would often be used as modules...) [dbrownell@users.sourceforge.net: bugfix, more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-03-28mtd: maps/physmap: fix oops in suspend/resume/shutdown opsAnton Vorontsov
# reboot ... [ 42.351266] Flash device refused suspend due to active operation (state 0) [ 42.358195] Unable to handle kernel NULL pointer dereference at virtual address 00000078 [ 42.360060] pgd = c7d9c000 [ 42.362769] [00000078] *pgd=a7d8d031, *pte=00000000, *ppte=00000000 [ 42.372902] Internal error: Oops: 17 [#1] [ 42.376911] Modules linked in: [ 42.379980] CPU: 0 Not tainted (2.6.25-rc2-10642-ge8f2594-dirty #73) [ 42.380000] PC is at physmap_flash_shutdown+0x28/0x54 ... [ 42.380000] Backtrace: [ 42.380000] [<c0130c1c>] (physmap_flash_shutdown+0x0/0x54) from [<c01207c0>] (platform_drv_shutdown+0x20/0x24) [ 42.380000] r5:28121969 r4:c0229e08 [ 42.380000] [<c01207a0>] (platform_drv_shutdown+0x0/0x24) from [<c011cd40>] (device_shutdown+0x60/0x88) [ 42.380000] [<c011cce0>] (device_shutdown+0x0/0x88) from [<c003e8a4>] (kernel_restart_prepare+0x2c/0x3c) [ 42.380000] r4:00000000 [ 42.380000] [<c003e878>] (kernel_restart_prepare+0x0/0x3c) from [<c003ea00>] (kernel_restart+0x14/0x48) [ 42.380000] [<c003e9ec>] (kernel_restart+0x0/0x48) from [<c003fdc0>] (sys_reboot+0xe8/0x1f8) [ 42.380000] r4:01234567 [ 42.380000] [<c003fcd8>] (sys_reboot+0x0/0x1f8) from [<c001aa00>] (ret_fast_syscall+0x0/0x2c) [ 42.380000] r7:00000058 r6:00000004 r5:00000001 r4:00000000 [ 42.380000] Code: 0a000009 e7953004 e1a00003 e1a0e00f (e593f078) [ 42.650051] ---[ end trace 6d6c26a0fc3141de ]--- Segmentation fault INIT: no more processes left in this runlevel While looping for mtd[i]s, we should stop at the mtd[i] == NULL. This patch also removes unnecessary "if (info)" checks: suspend/resume/shutdown ops are executed only if probe() is succeeded, so info is guaranteed to be !NULL. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07[MTD] Fix maps/physmap.c compilation with CONFIG_PMakpm@linux-foundation.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03[MTD] physmap.c: Add support for multiple resourcesStefan Roese
This patch extends the physmap mapping driver to support multiple resources for non-identical NOR chips that will be concatenated together when selected. This is needed for example for Intel 48F4400 512MBit chips, since they consist of 2 single different NOR chips with different geometries. The first (lower) one has botton boot sectors and the 2nd (upper) has top boot sectors. This currently isn't handled correctly by calling the physmap driver once with only one resource covering both chips in one memory region. The same geometrie is used for both chips. With this patch the following resource structure can be used to describe the 48F4400 chip correctly: static struct resource board_nor_resource[] = { [0] = { .start = 0xf8000000, .end = 0xfbffffff, .flags = IORESOURCE_MEM, }, [1] = { .start = 0xfc000000, .end = 0xffffffff, .flags = IORESOURCE_MEM, } }; Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-11-28[MTD] replace kmalloc+memset with kzallocBurman Yan
Signed-off-by: Yan Burman <yan_952@hotmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-11-28[MTD] Fix printk format warning in physmap. (resources again)Randy Dunlap
Fix printk format warning: drivers/mtd/maps/physmap.c:93: warning: long long unsigned int format, long unsigned int arg (arg 2) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-10[PATCH] mtd: remove several bogus casts to void * in iounmap() argumentAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-22[MTD] physmap: add power management supportLennert Buytenhek
Implement PM handling for physmap. Idea from Steven Scholz, patch by David Anders. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27[MTD] Fix off-by-one error in physmap.cSascha Hauer
This patch fixes a simple off-by-one error in the mtd physmap driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-09[MTD] Prepare physmap for 64-bit-resourcesAndrew Morton
Fallout from the incoming 64-bit-resource stuff: drivers/mtd/maps/physmap.c: In function 'physmap_flash_probe': drivers/mtd/maps/physmap.c:94: warning: format '%.8lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' drivers/mtd/maps/physmap.c:94: warning: format '%.8lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t' Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-14[MTD] Remove gratuitous inclusion of ARM-only header from physmap.cDavid Woodhouse
The physmap platform driver conversion added to physmap.c an include of asm/mach/flash.h which is 1) ARM-specific; and 2) isn't actually necessary. Remove it. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07[MTD] Convert physmap to platform driverLennert Buytenhek
After dwmw2 let me know it ought to be done, I rewrote the physmap map driver to be a platform driver. I know zilch about the driver model, so I probably botched it in some way, but I've done some tests on an ixp23xx board which uses physmap, and it all seems to work. In order to not break existing physmap users, I've added some compat code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN is defined and != 0. Also, I've changed the default value for CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently compile in physmap (or new, platform-style, users of physmap) don't get burned. This works pretty well -- the new physmap driver is a drop-in replacement for the old one, and works on said ixp23xx board without any code changes needed. (This should hold as long as users don't touch 'physmap_map' directly.) Once all physmap users have been converted to instantiate their own platform devices, the compat code can go. (Or we decide that we can change all the in-tree users at the same time, and never merge the compat code.) Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-11-29[MTD] Make functions static, include header files with prototypesAdrian Bunk
This patch contains the following possible cleanups: - every file should #include the headers containing the prototypes for it's global functions - make needlessly global functions static Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07[MTD] maps: Clean up trailing white spacesThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!