summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand
AgeCommit message (Collapse)Author
2009-09-23Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (58 commits) mtd: jedec_probe: add PSD4256G6V id mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board) mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board) m25p80: Add Spansion S25FL129P serial flashes jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs mtd: sh_flctl: register sh_flctl using platform_driver_probe() mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible mtd: nand: fix tmio_nand ecc correction mtd: nand: add __nand_correct_data helper function mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G mtd: inftl: fix fold chain block number mtd: jedec: fix compilation problem with I28F640C3B definition mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver mtd: ofpart: Check availability of reg property instead of name property driver/Makefile: Initialize "mtd" and "spi" before "net" mtd: omap: adding DMA mode support in nand prefetch/post-write mtd: omap: add support for nand prefetch-read and post-write mtd: add nand support for w90p910 (v2) mtd: maps: add mtd-ram support to physmap_of mtd: pxa3xx_nand: add single-bit error corrections reporting ...
2009-09-21trivial: mtd: add __init/__exit macros to init/exitfunctionsPeter Huewe
Trivial patch which adds the __init and __exit macros to the module_init / module_exit functions to the following modules from drivers/mtd/ devices/m25p80.c devices/slram.c linux version 2.6.30 ftl.c nand/cafe_nand.c nand/cmx270_nand.c Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-20mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)Alessandro Rubini
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-20Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/mtd/mtdcore.c Merged in order that I can apply the Nomadik nand/onenand support patches.
2009-09-19mtd: sh_flctl: register sh_flctl using platform_driver_probe()David Woodhouse
As with orion_nand in commit f33dabbe79fdf7a8568c65faa1db7794c87ac4d3 ("register orion_nand using platform_driver_probe()"), avoid .init.text problems by using platform_device_probe(). This isn't going to be hotplugged anyway. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: nand: txx9ndfmc: transfer 512 byte at a time if possibleAtsushi Nemoto
Using __nand_correct_data() helper function, this driver can read 512 byte (with 6 byte ECC) at a time. This results minor performance improvement. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: nand: fix tmio_nand ecc correctionAtsushi Nemoto
This driver may be reading 512 bytes at a times, but still calculates 256-byte sector ECC. So the nand_correct_data() is not appropriate for this driver. Implement its ecc.correct function calling __nand_correct_data() twice. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: nand: add __nand_correct_data helper functionAtsushi Nemoto
Split nand_correct_data() into two part, a pure calculation function and a wrapper for mtd interface. The tmio_nand driver can implement its ecc.correct function easily using this __nand_correct_data helper. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driverFeng Kan
Fix ECC Correction bug where the byte offset location were double fliped causing correction routine to toggle the wrong byte location in the ECC segment. The ndfc_calculate_ecc routine change the order of getting the ECC code. /* The NDFC uses Smart Media (SMC) bytes order */ ecc_code[0] = p[2]; ecc_code[1] = p[1]; ecc_code[2] = p[3]; But in the Correction algorithm when calculating the byte offset location, the b1 is used as the upper part of the address. Which again reverse the order making the final byte offset address location incorrect. byte_addr = (addressbits[b1] << 4) + addressbits[b0]; The order is change to read it in straight and let the correction function to revert it to SMC order. Cc: stable@kernel.org Signed-off-by: Feng Kan <fkan@amcc.com> Acked-by: Victor Gallardo <vgallardo@amcc.com> Acked-by: Prodyut Hazarika <phazarika@amcc.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: omap: adding DMA mode support in nand prefetch/post-writevimal singh
This patch adds DMA mode support for nand prefetch/post-write engine. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: omap: add support for nand prefetch-read and post-writevimal singh
This patch adds prefetch support to access nand flash in mpu mode. This patch also adds 8-bit nand support (omap_read/write_buf8). Prefetch can be used for both 8- and 16-bit devices. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: add nand support for w90p910 (v2)Wan ZongShun
Add w90p910 NAND driver for w90p910 evaluation board based on w90p910,there is a K8F1G08 NAND on my board. [dwmw2: depend on MTD_PARTITIONS] Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: pxa3xx_nand: add single-bit error corrections reportingYeasah Pell
Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Yeasah Pell <yeasah@comrex.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: mxc_nand: fix 2KiB pagesize NAND on i.MX27Eric Benard
This patch allows i.MX27 to support 2KiB pagesize NAND flash. We are using a 1.8V NAND flash which datasheet (unfortunately only available under NDA) says : Page size: x8: 2,112 bytes (2,048 + 64 bytes). Without this patch, all sectors are marked as bad eraseblock. Signed-off-by: Eric Benard <ebenard@eukrea.com> Acked-by : Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: nand: DaVinci: Add 4-bit ECC support for large page NAND chipsSneha Narnakaje
This patch adds 4-bit ECC support for large page NAND chips using the new ECC mode NAND_ECC_HW_OOB_FIRST. The platform data from board-dm355-evm has been adjusted to use this mode. The patches have been verified on DM355 device with 2KiB-page Micron devices using mtd-tests and JFFS2. Error correction up to 4 bits has also been verified using nandwrite/nanddump utilities. Reviewed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: nand: add new ECC mode - ECC_HW_OOB_FIRSTSneha Narnakaje
This patch adds the new mode NAND_ECC_HW_OOB_FIRST in the nand code to support 4-bit ECC on TI DaVinci devices with large page (up to 2KiB) NAND chips. This ECC mode is similar to NAND_ECC_HW, with the exception of read_page API that first reads the OOB area, reads the data in chunks, feeds the ECC from OOB area to the ECC hw engine and perform any correction on the data as per the ECC status reported by the engine. "ECC_HW_OOB_FIRST" name suggested by Thomas Gleixner Reviewed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: nand: add "page" parameter to all read_page/read_page_raw APIsSneha Narnakaje
This patch adds a new "page" parameter to all NAND read_page/read_page_raw APIs. The read_page API for the new mode ECC_HW_OOB_FIRST requires the page information to send the READOOB command and read the OOB area before the data area. Reviewed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: nand: register orion_nand using platform_driver_probe()Uwe Kleine-König
orion_nand_probe lives in .init.text, so using platform_driver_register to register it is wrong because binding a device after the init memory is discarded (e.g. via sysfs) results in an oops. As requested by Nicolas Pitre platform_driver_probe is used instead of moving the probe function to .devinit.text as proposed initially. This saves some memory, but devices registered after the driver is probed are not bound (probably there are none) and binding via sysfs isn't possible. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Lennert Buytenhek <buytenh@marvell.com> Cc: Saeed Bishara <saeed@marvell.com> Cc: Joern Engel <joern@logfs.org> Acked-by: Nicolas Pitre <nico@marvell.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-18Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits) OMAP clock: use debugfs_remove_recursive() for rewinding OMAP2/3/4 core: create omap_device layer OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects OMAP2/3/4: create omap_hwmod layer OMAP2/3 board-*.c files: read bootloader configuration earlier OMAP2/3/4 PRCM: add module IDLEST wait code OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm OMAP clock: associate MPU clocks with the mpu_clkdm OMAP3 clock: Fixed processing of bootarg 'mpurate' OMAP: SDRC: Add several new register definitions OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups. OMAP: PM: Added suspend target state control to debugfs for OMAP3 OMAP: PM debug: Add PRCM register dump support OMAP: PM debug: make powerdomains use PM-debug counters OMAP: PM: Add pm-debug counters OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each. OMAP: PM: Hook into PM counters OMAP: PM counter infrastructure. OMAP3: PM: fix lockdep warning caused by omap3_pm_init ...
2009-09-12Merge branch 'master' into develRussell King
2009-09-12Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and ↵Russell King
'w90x900' into devel
2009-09-04mtd: nand_base: allow drivers to choose ECC block sizeSingh, Vimal
This patch allows core driver to choose ECC block size in sw ecc case. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04mtd: ep93xx: cleanup includes in ts7250 nand driverH Hartley Sweeten
1. <linux/io.h> should be included not <asm/io.h> 2. add platform specific header <mach/ts72xx.h> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04mtd: nand_base: use __func__ instead of typing namesvimal singh
Correcting debug prints by removing function names from print messages and using '__func__' macro instead. Function names were wrong in few places. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04mtd: nand: remove repeated comment, fix spellingvimal singh
Singed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-28OMAP: Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASETony Lindgren
Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-24[ARM] Orion NAND: Make asm volatile avoid GCC pushing ldrd out of the loopSimon Kagstrom
GCC 4.3.3 and 4.4.1 happily moves the dword load instruction out of the loop in orion_nand_read_buf. This patch makes the instruction volatile to avoid the issue. I've discussed this at gcc-help, refer to the thread at http://gcc.gnu.org/ml/gcc-help/2009-08/msg00187.html The early clobber is added to avoid the destination registers and the source register overlapping. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-07-09[ARM] 5592/1: ep93xx: cleanup platform header includesHartley Sweeten
arch/arm/mach-ep93xx/include/mach/hardware.h 1. Properly name the include files so that they are loaded from the <mach/*> directory and not the local directory. 2. Remove including the ts72xx.h header. This header is not generic to the ep93xx platform. It should only be included by the ts72xx specific files that require it. The only two users in the tree are arch/arm/mach-ep93xx/ts72xx.c and drivers/mtd/nand/ts7250.c. arch/arm/mach-ep93xx/include/mach/ts72xx.h 1. <linux/io.h> should already be included by any user of this header. Doing the include here hides it from being needed by the calling source file. arch/arm/mach-ep93xx/core.c 1. Remove unnecessary headers. They were probably included originally due to cut-and-paste from other files. 2. <linux/io.h> should be included not <mach/gpio.h> arch/arm/mach-ep93xx/adsphere.c arch/arm/mach-ep93xx/edb93xx.c arch/arm/mach-ep93xx/gesbc9312.c arch/arm/mach-ep93xx/micro9.c arch/arm/mach-ep93xx/ts72xx.c 1. Remove unnecessary headers. arch/arm/mach-ep93xx/ts72xx.c 1. Remove unnecessary headers. 2. Add platform specific header <mach/ts72xx.h>. drivers/mtd/nand/ts7250.c 1. <linux/io.h> should be included not <asm/io.h>. 2. Add platform specific header <mach/ts72xx.h>. Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-28mtd: nand: fix build failure and incorrect return from omap_wait()vimal singh
We need to include jiffies.h manually in some cases, and the status returned from omap_wait() was broken in two separate ways. Also add cond_resched() to the loop. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-25mtd: atmel_nand: Fix typo s/parititions/partitions/Thadeu Lima de Souza Cascardo
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-22Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (63 commits) mtd: OneNAND: Allow setting of boundary information when built as module jffs2: leaking jffs2_summary in function jffs2_scan_medium mtd: nand: Fix memory leak on txx9ndfmc probe failure. mtd: orion_nand: use burst reads with double word accesses mtd/nand: s3c6400 support for s3c2410 driver [MTD] [NAND] S3C2410: Use DIV_ROUND_UP [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set mtd: physmap_of: Add multiple regions and concatenation support mtd: nand: max_retries off by one in mxc_nand mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440 mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform mtd: Flex-OneNAND support mtd: nand: add OMAP2/OMAP3 NAND driver mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs mtd: uclinux: mark local stuff static mtd: uclinux: do not allow to be built as a module mtd: uclinux: allow systems to override map addr/size mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs ...
2009-06-12trivial: Kconfig: .ko is normally not included in module namesPavel Machek
.ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-09mtd: nand: Fix memory leak on txx9ndfmc probe failure.Atsushi Nemoto
Commit 81933046ef2a615031c46171013bde2c5225ee69 ('mtd: Fix handling of mtdname in txx9ndfmc.c') introduced a potential memory leak. The 'mtdname' member of the private data structure is now allocated separately, but was not freed on certain error paths. Fix that, and make things simpler by _always_ allocating it separately so that we don't need 'if (mtdname != dev_name()) kfree(mtdname);'... which gets ugly now that we're doing it more than once, and more likely that we'll get it wrong some time. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-08mtd: orion_nand: use burst reads with double word accessesNicolas Pitre
This is not 8 times faster than byte access, but still around 60% faster. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-08mtd/nand: s3c6400 support for s3c2410 driverPeter Korsgaard
Add s3c6400 support to the s3c2410 driver. The nand controller in the s3c64xx devices is compatible with the one in the s3c2412, so simply reuse that code. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-08Merge branch 'next-mtd' of git://aeryn.fluff.org.uk/bjdooks/linuxDavid Woodhouse
2009-06-08[MTD] [NAND] S3C2410: Use DIV_ROUND_UPBen Dooks
Change to using DIV_ROUND_UP() in the timing calculation instead of blindly doing result++ Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-08[MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/writeBen Dooks
Add code to deal with fractional lengths, as reported by Werner Almesberger. Re-work of his original patch. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-08[MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NANDMichel Pollet
Added a flag to allow the machine code to tell the NAND subsystem that it should try to pickup a BBT from the flash, and also skip the NAND full scan at startup. Signed-off-by: Michel Pollet <buserror@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-05mtd: nand: max_retries off by one in mxc_nandRoel Kluin
with `while (max_retries-- > 0)' max_retries reaches -1 after the loop. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440Peter Korsgaard
Use the correct S3C2440_NFCONF_* macros for the mask for the 2412/2440 variants instead of the 2410 ones which use wrong bit positions. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: davinci nand: update clock namingKevin Hilman
DaVinci clock support has been updated in mainline. Update clock names accordingly. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-05mtd: nand: add OMAP2/OMAP3 NAND driverVimal Singh
This driver is present in the OMAP tree, now pushing it to MTD. Original author(s): Jian Zhang <jzhang@ti.com> Signed-off-by: Vimal Singh <vimalsingh@ti.com> Cc: Jian Zhang <jzhang@ti.com> Cc: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITsCliff Cai
The DMAs have different bit sizes on BF52x and BF54x. From the PHRM: "The 16-bit DMA Access Bus (DAB) connects the DMA controller to the on-chip peripherals, PPI, SPI, Ethernet MAC, the SPORTs, NFC, HOSTDP and the UARTs." 32-bit DMA won't work for BF52x. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: blackfin NFC: remove pointless return value in bf5xx_nand_dma_rwMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: add on-flash BBT support for Atmel NAND driverSimon Polette
Just add a new on-flash-bbt module parameter. Signed-off-by: Simon Polette <spolette@adetelgroup.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: MXC NAND support for 2KiB page size flashesVladimir Barinov
- Add support for 2KiB page size flashes - Fix page address access for large pages - Detect oob layout at runtime - handle pagesize_2k variable - Fix oob16 layout: reserve location 5 of oob area since it's used for bbt Signed-off-by: Vladimir Barinov <vova.barinov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: plat_nand: allow platform to set partitionsH Hartley Sweeten
Add optional callback to allow platform to initialize partitions. Static partitions on a nand device could vary depending on the size of the device. This patch allows an optional platform callback to be used to setup this partition information at runtime. Scan order is: 1) chip.part_probe_types 2) chip.set_parts 3) chip.partitions 4) full mtd device (fallback for no partitions) Some of the existing nand drivers could possibly be replaced by the plat_nand driver by using this patch. These include autcpu12.c and ts7250.c drivers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: plat_nand: add platform probe/remove callbacksH Hartley Sweeten
Add optional probe and remove callbacks to the plat_nand driver. Some platforms may require additional setup, such as configuring the memory controller, before the nand device can be accessed. This patch provides an optional callback to handle this setup as well as a callback to teardown the setup. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: extend plat_nand for (read|write)_bufAlexander Clouter
This patch adds (write|read)_buf callbacks to plat_nand. The NAND on the TS-7800 provisioned by the FPGA allows readw() and readl() to be used which gives a 2.5x speed up. To be able to use this from the plat_nand driver a hook for read_buf (and also write_buf whilst we are in there) need to be made available. This patch adds the hook. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>