summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand
AgeCommit message (Collapse)Author
2009-03-03[ARM] fix lots of ARM __devexit sillynessRussell King
`iop_adma_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv_xor_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_unmap_regs' referenced in section `.devinit.text' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `orion_nand_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `pxafb_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-16[ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device ↵Gregory CLEMENT
controller Add support for inverted rdy_busy pin for Atmel nand device controller It will fix building error on NeoCore926 board. Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gregory CLEMENT <gclement@adeneo.adetelgroup.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-28powerpc: More printing warning fixes for the l64 to ll64 conversionStephen Rothwell
These are all powerpc specific drivers. res.start in fsl_elbc_nand.c needs to be cast since it may be either 32 or 64 bit. Thanks to Scott Wood for noticing. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Arnd Bergmann <arnd@arndb.de> call_edac bits in particular Acked-by: Olof Johansson <olof@lixom.net> pasemi_nand peices Acked-by: Scott Wood <scottwood@freescale.com> fsl_elbc fixes Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-09[MTD] [NAND] add cmdline parsing (mtdparts=) support to cafe_nandPhilip Rakity
[dwmw2: updated and made to still register whole device first] Signed-off-by: Philip Rakity <pakity@yahoo.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-05[MTD] [NAND] ndfc driverSean MacLennan
The current ndfc driver only compiles under arch/ppc. This arch was removed from the kernel. I notice the event entry for the ndfc in Kconfig has been removed in 2.6.28. This patch converts the ndfc to a proper OF (OpenFirmware) driver. I can give a working example of the DTS if needed. The patch has been in production use on the PIKA Warp Appliance and is in use by others. The Warp basically boots from NAND, so the ndfc driver is very important to us. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Acked-By: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-05[MTD] [NAND] pxa3xx: convert from ns to clock ticks more accuratelyMatt Reimer
The various fields in NDTR{01} are in units of clock ticks minus one, but the ns2cycle macro mistakenly adds one, inflating the number of clock ticks and making it impossible to set any of these fields to zero. Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-05[MTD] [NAND] pxa3xx: fix non-page-aligned readsMatt Reimer
Reads from non-page-aligned addresses were broken because while the address to read from was correctly written to NDCB*, a full page was always read. Fix this by ignoring the column and only using the page address. I suspect this whole-page behavior is due to the controller's need to read the entire page in order to generate correct ECC. In the non-ECC case this could be optimized to use the column address, and to set the read length to what is being requested rather than the length of an entire page. Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-05[MTD] [NAND] fix nandsim sched.h referencesRandy Dunlap
Fix sched.h references: build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1326: error: dereferencing pointer to incomplete type build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1326: error: 'PF_MEMALLOC' undeclared (first use in this function) build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1328: error: dereferencing pointer to incomplete type build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1335: error: dereferencing pointer to incomplete type build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1335: error: 'PF_MEMALLOC' undeclared (first use in this function) build-r7149.out:make[4]: *** [drivers/mtd/nand/nandsim.o] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-05[MTD] [NAND] alauda: use USB API functions rather than constantsJulia Lawall
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-05Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/arm/mach-pxa/corgi.c arch/arm/mach-pxa/poodle.c arch/arm/mach-pxa/spitz.c
2008-12-23[MTD] struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-16[ARM] MX3: add NAND supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-15Merge branch 'omap3-upstream' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-10[MTD] [NAND] Set the fsl elbc ECCM according the settings in bootloader.Jason Jin
The ECCM maybe set in bootloader, Get ECCM settings from the bootloader, can avoid the image written by bootloader cannot read out by kernel. But the limitation of doing it this way is that, it could break large page NAND if it is written with NAND disabled in u-boot and read with NAND enabled, or vice versa. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10[MTD] [NAND] remove excess kernel-doc notationRandy Dunlap
Delete extra kernel-doc notation for struct fields and function parameters that don't exist: Warning(include/linux/mtd/nand.h:428): Excess struct/union/enum/typedef member 'wq' description in 'nand_chip' Warning(include/linux/mtd/nand.h:428): Excess struct/union/enum/typedef member 'datbuf' description in 'nand_chip' Warning(include/linux/mtd/nand.h:428): Excess struct/union/enum/typedef member 'oobbuf' description in 'nand_chip' Warning(include/linux/mtd/nand.h:428): Excess struct/union/enum/typedef member 'oobdirty' description in 'nand_chip' Warning(include/linux/mtd/nand.h:428): Excess struct/union/enum/typedef member 'data_poi' description in 'nand_chip' Warning(drivers/mtd/nand/nand_base.c:2527): Excess function parameter 'maxchips' description in 'nand_scan_tail' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10Merge branch 'misc/mtd/sharpsl-nand' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/lumag/tosa-2.6
2008-12-10[MTD] [NAND] Remove strange u_int64_t types from nandsimDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10[MTD] update internal API to support 64-bit device sizeAdrian Hunter
MTD internal API presently uses 32-bit values to represent device size. This patch updates them to 64-bits but leaves the external API unchanged. Extending the external API is a separate issue for several reasons. First, no one needs it at the moment. Secondly, whether the implementation is done with IOCTLs, sysfs or both is still debated. Thirdly external API changes require the internal API to be accepted first. Note that although the MTD API will be able to support 64-bit device sizes, existing drivers do not and are not required to do so, although NAND base has been updated. In general, changing from 32-bit to 64-bit values cause little or no changes to the majority of the code with the following exceptions: - printk message formats - division and modulus of 64-bit values - NAND base support - 32-bit local variables used by mtdpart and mtdconcat - naughtily assuming one structure maps to another in MEMERASE ioctl Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10MTD: nandsim: use less RAMAlexey Korolev
Nandsim consumes ~2x more RAM than the density of simulated device. It becomes critical if we need to simulate 256MB NAND and run stress tests on it. We investigated the reasons. nandsim allocates space for pages using kmalloc function. The size of LP nand page is 2112 bytes. kmalloc gets space from slab pools by chunks 2^n. So if we need to kmalloc 2112 bytes, 4096 bytes will be consumed by system. The best way to avoid this issue would be using kmem_cache allocations. AFAIK this mechanism specially designed to handle cases when arrays of allocations are used. Signed-off-by: Alexey Korolev <akorolev@infradead.org> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10MTD: nandsim: add option to use a file to cache pagesAdrian Hunter
Add a new module parameter 'cache_file' which causes nandsim to use that file instead of memory to cache nand data. Using a file allows the simulation of NAND that is bigger than the available memory. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10MTD: nandsim: suppress unnecessary warningAdrian Hunter
nand_base sometimes reads only 2 bytes of a 4 byte id. It is OK. Do not print a warning in that case. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-03[MTD] [NAND] fix OOPS accessing flash operations over STM flash on PXADenis V. Lunev
STM 2Gb flash is a large-page NAND flash. Set operations accordingly. This field is dereferenced without a check in several places resulting in OOPS. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Eric Miao <ymiao3@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-02Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel Conflicts: arch/arm/mach-pxa/pxa25x.c
2008-12-02[MTD] [NAND] drivers/mtd/nand/pasemi_nand.c: Add missing pci_dev_putJulia Lawall
pci_get_device increments a reference count that should be decremented using pci_dev_put. The semantic patch that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S,S1; position p1,p2,p3; expression E,E1; type T,T1; expression *ptr != NULL; @@ ( if ((x@p1 = pci_get_device(...)) == NULL) S | x@p1 = pci_get_device(...); ) ... when != pci_dev_put(...,(T)x,...) when != if (...) { <+... pci_dev_put(...,(T)x,...) ...+> } when != true x == NULL || ... when != x = E when != E = (T)x when any ( if (x == NULL || ...) S1 | if@p2 (...) { ... when != pci_dev_put(...,(T1)x,...) when != if (...) { <+... pci_dev_put(...,(T1)x,...) ...+> } when != x = E1 when != E1 = (T1)x ( return \(0\|<+...x...+>\|ptr\); | return@p3 ...; ) } ) @ script:python @ p1 << r.p1; p3 << r.p3; @@ print "* file: %s pci_get_device: %s return: %s" % (p1[0].file,p1[0].line,p3[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-02[ARM] pxa: explicit #include <mach/dma.h> in various driversEric Miao
Where 'pxa_dma_desc' and 'pxa_{request,free}_dma' are referenced. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-29Merge branch 's3c-moves2' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2008-11-27Merge branches 'core' and 'clks' into develRussell King
2008-11-27[ARM] pxa: don't pass a consumer clock name for devices with unique clocksRussell King
Where devices only have one consumer, passing a consumer clock ID has no real benefit. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27[ARM] remove memzero()Russell King
As suggested by Andrew Morton, remove memzero() - it's not supported on other architectures so use of it is a potential build breaking bug. Since the compiler optimizes memset(x,0,n) to __memzero() perfectly well, we don't miss out on the underlying benefits of memzero(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27[MTD] [NAND] fsl_upm: fix build problem with 2.6.28-rc2Wolfgang Grandegger
The patch fixes following build error: CC drivers/mtd/nand/fsl_upm.o drivers/mtd/nand/fsl_upm.c: In function 'fun_chip_init': drivers/mtd/nand/fsl_upm.c:168: warning: passing argument 2 of 'of_mtd_parse_partitions' from incompatible pointer type drivers/mtd/nand/fsl_upm.c:168: warning: passing argument 3 of 'of_mtd_parse_partitions' from incompatible pointer type drivers/mtd/nand/fsl_upm.c:168: error: too many arguments to function 'of_mtd_parse_partitions' make[1]: *** [drivers/mtd/nand/fsl_upm.o] Error 1 The breakage was introduced in 69fd3a8d098faf41a04930afa83757c0555ee360 ("[MTD] remove unused mtd parameter in of_mtd_parse_partitions()"). While at it, also add a check for the of_mtd_parse_partitions() return value. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-30[ARM] S3C: Move nand headers to arch/arm/plat-s3c/include/platBen Dooks
Move nand headers to arch/arm/plat-s3c/include/plat ready to clean out the old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-29[MTD] sharpsl-nand: move registration to board codeDmitry Baryshkov
Finally move registration of sharpsl-nand device to board-specific code. sharpsl nand driver is now clean and simple. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
2008-10-29[MTD] sharpsl-nand: use platform_data for model-specific valuesDmitry Baryshkov
Add platform_data which holds all model-specific values, like badblocks pattern, oobinfo, partitions. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
2008-10-29[MTD] sharpsl-nand: cleanup partitions supportDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
2008-10-29[MTD] sharpsl_nand: move io addr to struct sharpsl_nandDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
2008-10-29[MTD] sharpsl_nand: make drvdata non-staticDmitry Baryshkov
Merge mtd_info and nand_chip info special struct and make it drvdata instead of plain static variable. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
2008-10-29[MTD] sharpsl_nand: switch to driver model usage.Dmitry Baryshkov
Start cleanup of sharpsl_nand driver. Convert it to platform driver. Corresponding device is temprorary registered in sharpsl.c but will be later moved to corresponding board files. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
2008-10-20Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (69 commits) Revert "[MTD] m25p80.c code cleanup" [MTD] [NAND] GPIO driver depends on ARM... for now. [MTD] [NAND] sh_flctl: fix compile error [MTD] [NOR] AT49BV6416 has swapped erase regions [MTD] [NAND] GPIO NAND flash driver [MTD] cmdlineparts documentation change - explain where mtd-id comes from [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection [MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash [MTD] mtdoops: Fix a bug where block may not be erased [MTD] mtdoops: Add a magic number to logged kernel oops [MTD] mtdoops: Fix an off by one error [JFFS2] Correct parameter names of jffs2_compress() in comments [MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL [MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written [MTD] [MAPS] Remove unused variable after ROM API cleanup. [MTD] m25p80.c extended jedec support (v2) [MTD] remove unused mtd parameter in of_mtd_parse_partitions() [MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGE [MTD] [NAND] driver extension to support NAND on TQM85xx modules ...
2008-10-20[MTD] [NAND] GPIO driver depends on ARM... for now.David Woodhouse
Not all architectures provide readsb(). We should probably move to using ioread8_rep() instead. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-20[MTD] [NAND] sh_flctl: fix compile errorYoshihiro Shimoda
Fix compile error because the first patch was broken -- the file got truncated. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18[MTD] [NAND] GPIO NAND flash driverMike Rapoport
The patch adds support for NAND flashes connected to GPIOs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18[MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.cManish Katiyar
Below patch fixes the following compilation warnings. drivers/mtd/nand/cs553x_nand.c:293: warning: unused variable 'mtd_parts' drivers/mtd/nand/cs553x_nand.c:292: warning: unused variable 'mtd_parts_nb' Signed-off-by: Manish Katiyar <mkatiyar@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-17USB: remove info() macro from usb mtd driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16omap drivers: switch to standard GPIO callsDavid Brownell
This updates most of the OMAP drivers which are in mainline to switch to using the cross-platform GPIO calls instead of the older OMAP-specific ones. This is all fairly brainless/obvious stuff. Probably the most interesting bit is to observe that the omap-keypad code seems to now have a portable core that could work with non-OMAP matrix keypads. (That would improve with hardware IRQ debouncing enabled, of course...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14[MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTLYoshihiro Shimoda
Several Renesas SuperH CPU has FLCTL. The FLCTL support NAND Flash. This driver support SH7723. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-14[MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly writtenRichard Genoud
The functions that write the OOB info (on hardware ECC only) use the HW_SYNDROME method. This is not correct : the start position is "pos = eccsize + chunk" and should be eccsize. So, the standard (nand_write_oob_std) function should be used. This patch corrects this by using NAND_ECC_HW instead of NAND_ECC_HW_SYNDROME. This has only been tested on small pages nand flash. (if anyone can test it on large pages that would be great). kernel version : 2.6.27-rc2 (current git mtd-2.6) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-13Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-x86/statfs.h
2008-10-13[MTD] remove unused mtd parameter in of_mtd_parse_partitions()Sebastian Andrzej Siewior
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-10[MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGEKumar Gala
Removed the Kconfig associated with 'NDFC NanD Flash Controller'. We can't enable !CONFIG_PPC_MERGE so there is no way to enable this. Additionally the code needs to get updated for arch/powerpc. For the time being lets just remove the Kconfig option so we can actually remove CONFIG_PPC_MERGE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-10[MTD] [NAND] driver extension to support NAND on TQM85xx modulesWolfgang Grandegger
This patch extends the FSL UPM NAND driver from Anton Vorontsov to support hardware which does not have the R/B pin of the NAND chip connected, like the TQM8548 module: - The OF_GPIO dependency has been removed from the Kconfig option because GPIO is not needed. The relevant gpio_* function are then stubbed out in <linux/gpio.h>. - It re-introduces the chip-delay property to define an appropriate maximum delay time (tR) required for read operations. The binding will be documented in a separate patch. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-16 16:38:56 +0000