summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand
AgeCommit message (Collapse)Author
2011-04-09Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd: atmel_nand: use CPU I/O when buffer is in vmalloc(ed) region mtd: atmel_nand: modify test case for using DMA operations mtd: atmel_nand: fix support for CPUs that do not support DMA access mtd: atmel_nand: trivial: change DMA usage information trace mtd: mtdswap: fix printk format warning
2011-04-01mtd: atmel_nand: use CPU I/O when buffer is in vmalloc(ed) regionHong Xu
The previous way of dealing with vmalloc(ed) region by walking though the pages can not work well actually. We just fall back to CPU I/O when the buffer address is higher than `high_memory'. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-01mtd: atmel_nand: modify test case for using DMA operationsNicolas Ferre
We have better performances not using DMA for oob operations. Modify size test so that it is using DMA for size greater than oobsize. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-01mtd: atmel_nand: fix support for CPUs that do not support DMA accessHong Xu
use_dma was always "1" even if the CPU does not support DMA Tested on AT91SAM9261EK by Jean-Christophe PLAGNIOL-VILLARD Reported-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-01mtd: atmel_nand: trivial: change DMA usage information traceNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-25Merge branch 'master' of ↵Artem Bityutskiy
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus-1 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits) [media] rc: update for bitop name changes fs: simplify iget & friends fs: pull inode->i_lock up out of writeback_single_inode fs: rename inode_lock to inode_hash_lock fs: move i_wb_list out from under inode_lock fs: move i_sb_list out from under inode_lock fs: remove inode_lock from iput_final and prune_icache fs: Lock the inode LRU list separately fs: factor inode disposal fs: protect inode->i_state with inode->i_lock lib, arch: add filter argument to show_mem and fix private implementations SLUB: Write to per cpu data when allocating it slub: Fix debugobjects with lockless fastpath autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd() autofs4 - remove autofs4_lock autofs4 - fix d_manage() return on rcu-walk autofs4 - fix autofs4_expire_indirect() traversal autofs4 - fix dentry leak in autofs4_expire_direct() autofs4 - reinstate last used update on access vfs - check non-mountpoint dentry might block in __follow_mount_rcu() ... NOTE! This merge commit was created to fix compilation error. The block tree was merged upstream and removed the 'elv_queue_empty()' function which the new 'mtdswap' driver is using. So a simple merge of the mtd tree with upstream does not compile. And the mtd tree has already be published, so re-basing it is not an option. To fix this unfortunate situation, I had to merge upstream into the mtd-2.6.git tree without committing, put the fixup patch on top of this, and then commit this. The result is that we do not have commits which do not compile. In other words, this merge commit "merges" 3 things: the MTD tree, the upstream tree, and the fixup patch.
2011-03-23tmio: Silence warnings introduced by mfd changesAndres Salomon
This silences warnings such as drivers/video/tmiofb.c: In function 'tmiofb_hw_init': drivers/video/tmiofb.c:270: warning: initialization discards qualifiers from pointer target type These were added by me in commit 2a79bb1d. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mtd: Use mfd_data instead of driver_data for tmio_nandAndres Salomon
Use mfd_data for passing information from mfd drivers to mfd clients. The mfd_cell's driver_data field is being phased out. Clients that were using driver_data now access .mfd_data via mfd_get_data(). This changes tmio-nand only; mfd drivers with other cells are not modified. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: mfd_cell is now implicitly available to t7166xb driversAndres Salomon
No need to explicitly set the cell's platform_data/data_size. Modify clients to use mfd_get_cell helper function instead of accessing platform_data directly. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits) doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore Update cpuset info & webiste for cgroups dcdbas: force SMI to happen when expected arch/arm/Kconfig: remove one to many l's in the word. asm-generic/user.h: Fix spelling in comment drm: fix printk typo 'sracth' Remove one to many n's in a word Documentation/filesystems/romfs.txt: fixing link to genromfs drivers:scsi Change printk typo initate -> initiate serial, pch uart: Remove duplicate inclusion of linux/pci.h header fs/eventpoll.c: fix spelling mm: Fix out-of-date comments which refers non-existent functions drm: Fix printk typo 'failled' coh901318.c: Change initate to initiate. mbox-db5500.c Change initate to initiate. edac: correct i82975x error-info reported edac: correct i82975x mci initialisation edac: correct commented info fs: update comments to point correct document target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c ... Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-17Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
2011-03-17Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-16Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ...
2011-03-13Merge git://git.infradead.org/users/dwmw2/mtd-2.6.38Linus Torvalds
* git://git.infradead.org/users/dwmw2/mtd-2.6.38: mtd: add "platform:" prefix for platform modalias mtd: mtd_blkdevs: fix double free on error path mtd: amd76xrom: fix oops at boot when resources are not available mtd: fix race in cfi_cmdset_0001 driver mtd: jedec_probe: initialise make sector erase command variable mtd: jedec_probe: Change variable name from cfi_p to cfi
2011-03-11mtd: nand: enable software BCH ECC in nand simulatorIvan Djelic
This patch adds option 'bch' to nandsim, which can be used to enable software BCH ECC (introduced in previous patches) and select BCH error correction capability. Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: nand: add software BCH ECC supportIvan Djelic
This patch adds software BCH ECC support to mtd, in order to handle recent NAND device ecc requirements (4 bits or more). It does so by adding a new ecc mode (NAND_ECC_SOFT_BCH) for use by board drivers, and a new Kconfig option to enable BCH support. It relies on the generic BCH library introduced in a previous patch. When a board driver uses mode NAND_ECC_SOFT_BCH, it should also set fields chip->ecc.size and chip->ecc.bytes to select BCH ecc data size and required error correction capability. See nand_bch_init() documentation for details. It has been tested on the following platforms using mtd-utils, UBI and UBIFS: x86 (with nandsim), arm926ejs. Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: mxc_nand: fix OOB corruption when page size > 2KiBBaruch Siach
When page size is 4KiB, ecc.total is set to 8*9, and this causes nand_write_page_hwecc() to read past the initialized part of the eccpos array, which corrupts chip->oob_poi with bogus values from ecc_calc. Fix this by creating a proper nand_ecclayout for 4KiB flashes. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: DaVinci: Removed header file that is not requiredSandeep Paulraj
The DaVinci NAND driver was including the mach-types.h header file. This prevented the DaVinci NAND driver from getting used in a DSP only device. The linux port on c6x devices can make use of the same driver and does not define a corresponding header file. This header file was required in the driver because earlier there was code dependent on a machine_* check. This piece of code has now been factored out and is in arch/arm/mach-davinci/aemif.c Thus removing the header file is harmless Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: pxa3xx_nand: clean the keep configure codeLei Wen
Use nand_scan_ident to unify the need of mtd member initilization for both normal detection and keep configuration method. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: pxa3xx_nand: mtd scan id process could be defined by driver itselfLei Wen
Different NAND driver may require its unique detection. For pxa3xx_nand, it use its self id database to get the necessary info. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: pxa3xx_nand: unify prepare commandLei Wen
Make the interface simpler which could make both debug and enhancement easier. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid functionLei Wen
Since we have rework the irq process, we don't need additional delay in wait_for_event. Also write_cmd and __readid is also discarded for the same reason. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: pxa3xx_nand: rework irq logicLei Wen
Enable all irq when we start the nand controller, and put all the transaction logic in the pxa3xx_nand_irq. By doing this way, we could dramatically increase the performance by avoid unnecessary delay. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: pxa3xx_nand: make scan procedure more clearLei Wen
The previous probe function is some kind of big part. This patch seperate the resource allocation to keep the probe process more clear than before. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: mxc_nand: fix read past buffer endBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Sascha hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: omap3: nand: report corrected ecc errorsJohn Ogness
The number of corrected ECC errors should be reported since other MTD systems make use of this information (such as UBI data scrubbing). Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: nand: fix a typo in a commentaryJason Liu
Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: nand: fix pointer NULL pointer dereferencingStanislav Fomichev
In 'verify_bbt_descr()', first check the "bd" pointer, then dereference it. Comments amended by Artem. Signed-off-by: Stanislav Fomichev <kernel@fomichev.me> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: atmel_nand: Add DMA support to access NandflashHong Xu
Some SAM9 chips have the ability to perform DMA between CPU and SMC controller. This patch adds DMA support for SAM9RL, SAM9G45, SSAM9G46,AM9M10, SAM9M11. Signed-off-by: Hong Xu <hong.xu@atmel.com> Tested-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: mpc5121_nfc: don't treat NULL clk as an errorJamie Iles
clk_get() returns a struct clk cookie to the driver and some platforms may return NULL if they only support a single clock. clk_get() has only failed if it returns a ERR_PTR() encoded pointer. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: add "platform:" prefix for platform modaliasAxel Lin
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2011-03-10Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King
devel-stable
2011-03-07ARM: imx5x: clean up ARCH_MX5XRichard Zhao
Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc using ARCH_MX5X. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-02Merge branch 'devel-cleanup' into omap-for-linusTony Lindgren
Conflicts: arch/arm/mach-omap2/timer-gp.c
2011-02-28dt: Eliminate of_platform_{,un}register_driverGrant Likely
Final step to eliminate of_platform_bus_type. They're all just platform drivers now. v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-17omap3: nand: making ecc layout as compatible with romcode eccSukumar Ghorai
This patch overrides nand ecc layout and bad block descriptor (for 8-bit device) to support hw ecc in romcode layout. So as to have in sync with ecc layout throughout; i.e. x-loader, u-boot and kernel. This enables to flash x-loader, u-boot, kernel, FS images from kernel itself and compatiable with other tools. This patch does not enables this feature by default and need to pass from board file to enable for any board. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17omap3: nand: ecc layout select from board fileSukumar Ghorai
This patch makes it possible to select sw or hw (different layout options) ecc scheme supported by omap nand driver. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17omap3: nand: configurable fifo threshold to gain the throughputSukumar Ghorai
Configure the FIFO THREASHOLD value different for read and write to keep busy both filling and to drain out of FIFO at reading and writing. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17omap3: nand: prefetch in irq mode supportSukumar Ghorai
This patch enable prefetch-irq mode for nand transfer(read, write) Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17omap3: nand: configurable transfer type per boardSukumar Ghorai
nand transfer type (sDMA, Polled, prefetch) can be select from board file, enabling all transfer type in driver, by default. this helps in multi-omap build and to select different transfer type for different board. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17omap3630: nand: fix device size to work in polled modeSukumar Ghorai
zoom3 and 3630-sdp having the x16 nand device. This patch configure gpmc as x16 and select the currect function in driver for polled mode (without prefetch enable) transfer. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17kbuild, mtd, net: a few comment typo fixes and rewordingGilles Espinasse
Signed-off-by: Gilles Espinasse <g.esp@free.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-16workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'Tejun Heo
There are two spellings in use for 'freeze' + 'able' - 'freezable' and 'freezeable'. The former is the more prominent one. The latter is mostly used by workqueue and in a few other odd places. Unify the spelling to 'freezable'. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Dubov <oakad@yahoo.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Steven Whitehouse <swhiteho@redhat.com>
2011-01-17Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (59 commits) mtd: mtdpart: disallow reading OOB past the end of the partition mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe UBI: use mtd->writebufsize to set minimal I/O unit size mtd: initialize writebufsize in the MTD object of a partition mtd: onenand: add mtd->writebufsize initialization mtd: nand: add mtd->writebufsize initialization mtd: cfi: add writebufsize initialization mtd: add writebufsize field to mtd_info struct mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use mtd: OneNAND: add enable / disable methods to onenand_chip mtd: m25p80: Fix JEDEC ID for AT26DF321 mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max) mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips mtd: nand: ams-delta: drop omap_read/write, use ioremap mtd: m25p80: add debugging trace in sst_write mtd: nand: ams-delta: select for built-in by default mtd: OneNAND: lighten scary initial bad block messages mtd: OneNAND: OMAP2/3: add support for command line partitioning mtd: nand: rearrange ONFI revision checking, add ONFI 2.3 ... Fix up trivial conflict in drivers/mtd/Kconfig as per DavidW.
2011-01-06mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probeDan Carpenter
"info->cmdset" gets dereferenced in __readid() so it needs to be initialized earlier in the function. This bug was introduced in 18c81b1828f8 "mtd: pxa3xx_nand: remove the flash info in driver structure". Cc: stable@kernel.org [2.6.37+] Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: nand: add mtd->writebufsize initializationAnatolij Gustschin
Initialize mtd->writebufsize to be equal to mtd->writesize. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max)Ralf Rösch
See commit: c0cbfd0e81d879a950ba6f0df3f75ea30c5ab16e Using __nand_correct_data() helper function, this driver can read 512 byte (with 6 byte ECC) at a time. This is correct, but not more: With NAND chips providing page sizes > 512 Bytes chip->ecc.bytes are calculated > 6 in txx9ndfmc_nand_scan. According the data sheet there are (only) 6 bytes ECC available. After applying the patch a Hynix 512M*8 with 2KiB page size could be successfully formatted and used with an ubifs file system. Signed-off-by: Ralf Roesch <ralf.roesch@rw-gmbh.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: nand: ams-delta: drop omap_read/write, use ioremapJanusz Krzysztofik
There is a common requirement for not using OMAP specific omap_readw() / omap_writew() function calls in drivers/, but replace them with readw() / writew() on ioremap()ped addresses passed from arch/ instead. The patch implements this idea for the Amstrad Delta NAND driver. To be able to use the modified driver, the board file is updated with the platform device I/O resource declaration, which is passed from there. Created and tested against linux-2.6.37-rc5, on top of recent patch 'MTD: NAND: ams-delta: convert to platform driver'. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: nand: ams-delta: select for built-in by defaultJanusz Krzysztofik
Now that the Amstrad Delta NAND driver is converted to a platform driver, which prevents it from interfering with other unrelated hardware in multiple OMAP1 cpu and machine configurations, it can be automatically configured for being built into the kernel if the Amstrad Delta board is also selected. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-14 22:36:12 +0000