summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2010-03-26Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/mtd/nand/sh_flctl.c Maxim's patch to initialise sysfs attributes depends on the patch which actually adds sysfs_attr_init().
2010-03-21mtd/maps/pismo: remove dangling pointer and a leakWolfram Sang
While looking for drivers which forgot to clear i2c_clientdata before freeing the data structure it points to, I found that the pismo driver even has a leak on the probe error path. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-19Delete zero-length file drivers/mtd/maps/omap_nor.cJeff Garzik
The content was deleted in cc87edb173effdf74e680ee6d622a935ff0c1d6f, but the file remained as a zero-length file. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-03-18mtd: block2mtd: Use kasprintfJulia Lawall
kasprintf combines kmalloc and sprintf, and takes care of the size calculation itself. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,flag; expression list args; statement S; @@ a = - \(kmalloc\|kzalloc\)(...,flag) + kasprintf(flag,args) <... when != a if (a == NULL || ...) S ...> - sprintf(a,args); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-18mtd: small typo in MakefileMatteo Croce
Cosmetic fix: the path in the Makefile is wrong Signed-off-by: Matteo Croce <matteo@teknoraver.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-15mtd: enable sh_flctl on SH-Mobile ARMMagnus Damm
Update the Kconfig entry for the sh_flctl driver to enable build on SH-Mobile ARM platforms. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
2010-03-11mtd/nand/r852: Use pci_dma_mapping_error()David Woodhouse
... instead of comparing with DMA_ERROR_CODE, which will only work on powerpc/sparc/x86. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-11mtd/nand/r852: fix build for CONFIG_PCI disabledRandy Dunlap
r852 fails to build when CONFIG_PCI is not enabled since it uses pci_*() calls and is a PCI driver, so it should depend on PCI to prevent build errors. It should also #include <linux/pci.h>. drivers/mtd/nand/r852.c:1053: error: implicit declaration of function 'pci_prepare_to_sleep' drivers/mtd/nand/r852.c:1062: error: implicit declaration of function 'pci_back_from_sleep' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-08mtd: blktrans: do blk_cleanup_queue when it is really safe to do soMaxim Levitsky
I was calling it in del_mtd_blktrans_dev, but ->request_fn could still be running at that point, thus defer this call to blktrans_dev_release Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-08mtd: Make SM_FTL depend on MTD_NANDDavid Woodhouse
Randy Dunlap observed a build problem with the following config: CONFIG_SM_FTL=y CONFIG_SM_FTL_MUSEUM=y CONFIG_MTD_NAND=m The ECC calculation routines are then built as a module, but referenced by the sm_ftl code in the kernel, resulting in a build failure. The simple fix is to make CONFIG_SM_FTL depend on MTD_NAND unconditionally -- it's pointless without hardware support anyway. Fix some typos which Randy pointed out, too. Reported-By: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-08mtd: nand: r852: declare inline functions staticStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-08mtd: nand: r852: fix name space clashStephen Rothwell
and include delay.h for msleep(). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-08mtd/nand/r852: fix build for CONFIG_PM=nRandy Dunlap
Fix r852 build for the case of CONFIG_PM=n. drivers/mtd/nand/r852.c:1039: error: implicit declaration of function 'pci_prepare_to_sleep' drivers/mtd/nand/r852.c:1048: error: implicit declaration of function 'pci_back_from_sleep' This patch leaves r852_pm_ops untouched. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-08mtd: r852: Few fixes for problems that occur when card is rapidly ↵Maxim Levitsky
inserted/removed. First don't enable card detection logic to early. Second be very careful with DMA engine, to be sure it doesn't write to kernel memory driver doesn't own. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-08Merge branch 'master' into for-linusRussell King
2010-03-08Merge branch 'origin' into devel-stableRussell King
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-03-08Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
2010-03-07driver-core: Add attribute argument to class_attribute show/storeAndi Kleen
Passing the attribute to the low level IO functions allows all kinds of cleanups, by sharing low level IO code without requiring an own function for every piece of data. Also drivers can extend the attributes with own data fields and use that in the low level function. This makes the class attributes the same as sysdev_class attributes and plain attributes. This will allow further cleanups in drivers. Full tree sweep converting all users. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-06Merge git://git.infradead.org/ubi-2.6Linus Torvalds
* git://git.infradead.org/ubi-2.6: UBI: add write checking UBI: simplify debugging return codes UBI: fix attaching error path UBI: support attaching by MTD character device name UBI: mark few variables as __initdata
2010-03-02Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King
devel-stable Conflicts: arch/arm/Makefile
2010-03-01Merge with mainline to remove plat-omap/Kconfig conflictTony Lindgren
Conflicts: arch/arm/plat-omap/Kconfig
2010-03-01MTD: fix pismo build errorRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-27MIPS: Alchemy: physmap-flash for all devboardsManuel Lauss
Replace the devboard NOR MTD mapping driver with physmap-flash support. Also honor the "swapboot" switch settings wrt. to the layout of the NOR partitions. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboard register abstractionManuel Lauss
All Alchemy development boards have external CPLDs with a few registers in them. They all share an identical register layout with only a few minor differences (except the PB1000) in bit functions and base addresses. This patch - adds a primitive facility to initialize and use these external registers, - replaces all occurrences of bcsr->xxx accesses with calls to the new functions (the pb1200 cascade irq handling code is special). - collects BCSR register information scattered throughout the board headers in a central place. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-26mtd: r852 fix pci IDMaxim Levitsky
The PCI_DEVICE_ID_RICOH_R5C852 was missed in the edited commit, and on second thought I just open code it. This fixes compile error. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: Few follow up cleanups for Smartmedia/xD supportMaxim Levitsky
* Test results of few functions that were declared with __must_check * Fix bogus gcc warning about uinitialized variable 'ret' * Remove unused variable from mtdblock_remove_dev * Don't use deprecated DMA_32BIT_MASK Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: nand: Add driver for Ricoh xD/SmartMedia readerMaxim Levitsky
This adds a driver for Ricoh R5C852 xD card reader. This reader is a part of larger mulifunction chip and found at least in R5C832 Driver is complete, but bewere of the fact that some (probably only type M) xD cards are 'fake' which means that they have an on board CPU and expose emulated nand command set These cards don't even store the oob area on the flash, but generate it on the fly from something else. Thus they demand to have proper values written in the oob area, and therefore only useful with SmartMedia FTL. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: Add new SmartMedia/xD FTLMaxim Levitsky
This implements new readwrite SmartMedia/xd FTL. mtd driver must have support proper ECC and badblock verification based on oob parts for 512 bytes nand. Also mtd driver must define read_oob and write_oob, which are used to read and write both data and oob together. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 The SmartMedia FTL code depends on new kfifo bits from 2.6.33
2010-02-26mtd: nand: Add SmartMedia device table to sm_common moduleDavid Woodhouse
(and remove the CONFIG_MTD_NAND_SMARTMEDIA option which isn't going to be used now that we're doing it this way) Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: Workaround wrong write protect status on some xD cardsMaxim Levitsky
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: nand: Allow caller to pass alternative ID table to nand_scan_ident()David Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: common module for smartmedia/xD supportMaxim Levitsky
This small module implements few helpers that are usefull for nand drivers for SmartMedia/xD card readers. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: nand: add ->badblockbits for minimum number of set bits in bad block byteMaxim Levitsky
This can be used to protect against bitflips in that field, but now mostly for smartmedia. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: nand: make reads using MTD_OOB_RAW affect only ECC validationMaxim Levitsky
This changes the behavier of MTD_OOB_RAW. It used to read both OOB and data to the data buffer, however you would still need to specify the dummy oob buffer. This is only used in one place, but makes it hard to read data+oob without ECC test, thus I removed that behavier, and fixed the user. Now MTD_OOB_RAW behaves just like MTD_OOB_PLACE, but doesn't do ECC validation Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: nand: cleanup the nand_do_write_opsMaxim Levitsky
nand_do_write_ops was broken in regard to writing several pages, each with its own oob. Although nand_do_write_ops intends to allow such mode, it fails do do so Probably this was never tested. Also add missing checks for attempts to write at illegal offsets. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: nand: make MTD_OOB_PLACE work correctly.Maxim Levitsky
MTD_OOB_PLACE is supposed to read/write the raw oob data similiar to the MTD_OOB_RAW however due to a bug, currently it is not possible to read more data that is specified by the oob 'free' regions. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: nand: make suspend work if device is accessed by kernel threads.Maxim Levitsky
Since all userspace threads are frozen at the time the nand_suspend is called, they aren't inside any nand function. We don't call try_to_freeze in nand ether. Thus the only user that can be inside the nand functions is an non freezeable kernel thread. Thus we can safely wait for it to finish. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: blktrans: allow FTL drivers to export sysfs attributesMaxim Levitsky
This patch adds an ability to export sysfs attributes below the block disk device. This can be used to pass the udev an information about the FTL and could include the vendor, serial, version, etc... Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: call the remove notifiers before assuming it is in useMaxim Levitsky
Now that mtd block common layer is prepared for proper hotplug support, enable it here Now all users of the mtd device have a chance to put the mtd device when they are notified to do so, and they have to do so to make hotplug work. [dwmw2: There's more work to be done to fix hotplug in the general case, but this is a reasonable start] Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: mtdblock: test return value of add_mtd_blktrans_dev, because if can failMaxim Levitsky
This prevents a memory leak Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: blktrans: Hotplug fixesMaxim Levitsky
* Add locking where it was missing. * Don't do a get_mtd_device in blktrans_open because it would lead to a deadlock; instead do that in add_mtd_blktrans_dev. * Only free the mtd_blktrans_dev structure when the last user exits. * Flush request queue on device removal. * Track users, and call tr->release in del_mtd_blktrans_dev Due to that ->open and release aren't called more that once. Now it is safe to call del_mtd_blktrans_dev while the device is still in use. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: blktrans: remove mtd_blkcore_priv, switch to per device queue and threadMaxim Levitsky
This is the biggest change. To make hotplug possible, and this layer clean, the mtd_blktrans_dev now contains everything for a single mtd block translation device. Also removed some very old leftovers. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: create unlocked versions of {get,put}_mtd_deviceMaxim Levitsky
Use these only if you know that you already hold mtd_table_mutex Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: nand: Add MPC5121 NAND Flash Controller driverAnatolij Gustschin
Adds NAND Flash Controller driver for MPC5121 Revision 2. All device features, except hardware ECC and power management, are supported. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: nand_bcm: fix hot spin and code duplicationRoel Kluin
In the branch where pagesize equalled NAND_DATA_ACCESS_SIZE, NumToRead wasn't decremented in the `while (numToRead > 11)' loop. Also the first and last while loops were duplicated in both branches. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Leo Chen <leochen@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: omap2 fix prefetch mode read issueVimal Singh
There is a bug in nand prefetch read routine, which comes into effect only if nand device is a 16-bit device (as we have in zoom boards). This bug is effective only with below combination of conditions: 1. nand deivce, in use, is a 16 bit device 2. nand driver supports 'subpage' read 3. SW ECC is in use This was not seen old kernel (ex: .23), because when, in early days, we tested this (nand prefetch read in LDP boards) there was no 'subpage read' support. Later when we had subpage read in (.27) kernel, we had hw ecc enabled always in our internal tree. So, we missed this bug. This patch fixes the issue. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: omap2: correct 'info' pointer in 'omap_nand_remove'Vimal Singh
Removing OMAP NAND driver, when loaded as a module, gives error and does not get success. This fixes this and makes driver loadable and removable run time. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 21:53:09 +0000