summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2010-10-18mxc_nand: do not depend on disabling the irq in the interrupt handlerSascha Hauer
This patch reverts the driver to enabling/disabling the NFC interrupt mask rather than enabling/disabling the system interrupt. This cleans up the driver so that it doesn't rely on interrupts being disabled within the interrupt handler. For i.MX21 we keep the current behaviour, that is calling enable_irq/disable_irq_nosync to enable/disable interrupts. This patch is based on earlier work by John Ogness. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: John Ogness <john.ogness@linutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-29fix OMAP2 MTD build failureDaniel J Blueman
Fix build failure from recent interface change and merge. Tested on OMAP3430. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-14Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd: pxa3xx: fix build error when CONFIG_MTD_PARTITIONS is not defined mtd: mxc_nand: configure pages per block for v2 controller mtd: OneNAND: Fix loop hang when DMA error at Samsung SoCs mtd: OneNAND: Fix 2KiB pagesize handling at Samsung SoCs mtd: Blackfin NFC: fix invalid free in remove() mtd: Blackfin NFC: fix build error after nand_scan_ident() change mxc_nand: Do not do byte accesses to the NFC buffer.
2010-09-13mtd: pxa3xx: fix build error when CONFIG_MTD_PARTITIONS is not definedMark F. Brown
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: mxc_nand: configure pages per block for v2 controllerSascha Hauer
This patch initializes the pages per block field in CONFIG1 for v2 controllers. It also sets the FP_INT field. This is the last field not correctly initialized, so we can switch from read/modify/write the CONFIG1 reg to just write the correct value. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: John Ogness <john.ogness@linutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: OneNAND: Fix loop hang when DMA error at Samsung SoCsKyungmin Park
When DMA error occurs. it's loop hang since it can't exit the loop. and it's the right DMA handling code as Spec. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: OneNAND: Fix 2KiB pagesize handling at Samsung SoCsKyungmin Park
Wrong assumption bufferram can be switched between BufferRAM0 and BufferRAM1 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: Blackfin NFC: fix invalid free in remove()Mike Frysinger
Since info->mtd isn't dynamically allocated, we shouldn't attempt to kfree() it. Otherwise we get random fun corruption when unloading the driver built as a module. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: Blackfin NFC: fix build error after nand_scan_ident() changeMike Frysinger
Seems some patches got out sync when being merged. The Blackfin NFC driver was updated to use nand_scan_ident(), but it missed the change where nand_scan_ident() now takes 3 arguments. So update this driver to fix build failures. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-30UBI: do not oops when erroneous PEB is scheduled for scrubbingArtem Bityutskiy
When an erroneous PEB is scheduling for scrubbing, we end up with the following oops: [<c0162404>] (prot_queue_del+0x0/0x50) from [<c01635b4>] (ubi_wl_scrub_peb+0xec/0x13c) [<c01634c8>] (ubi_wl_scrub_peb+0x0/0x13c) from [<c01603bc>] (ubi_eba_read_leb+0x200/0x428) [<c01601bc>] (ubi_eba_read_leb+0x0/0x428) from [<c015e3c0>] (ubi_leb_read+0xe8/0x138) [<c015e2d8>] (ubi_leb_read+0x0/0x138) from [<c00d6918>] (ubifs_start_scan+0x7c/0xf4) [<c00d689c>] (ubifs_start_scan+0x0/0xf4) from [<c00e3650>] (ubifs_recover_leb+0x3c/0x730) [<c00e3614>] (ubifs_recover_leb+0x0/0x730) from [<c00e444c>] (ubifs_recover_log_leb+0xc8/0x2dc) [<c00e4384>] (ubifs_recover_log_leb+0x0/0x2dc) from [<c00d7c20>] (ubifs_replay_journal+0xb90/0x13a4) [<c00d7090>] (ubifs_replay_journal+0x0/0x13a4) from [<c00cdd68>] (ubifs_fill_super+0xb84/0x1054) [<c00cd1e4>] (ubifs_fill_super+0x0/0x1054) from [<c00ced04>] (ubifs_get_sb+0xc4/0x2ac) [<c00cec40>] (ubifs_get_sb+0x0/0x2ac) from [<c007f04c>] (vfs_kern_mount+0x58/0x94) [<c007eff4>] (vfs_kern_mount+0x0/0x94) from [<c007f0e8>] (do_kern_mount+0x40/0xe8) [<c007f0a8>] (do_kern_mount+0x0/0xe8) from [<c0095628>] (do_new_mount+0x68/0x8c) [<c00955c0>] (do_new_mount+0x0/0x8c) from [<c00957a8>] (do_mount+0x15c/0x1b8) [<c009564c>] (do_mount+0x0/0x1b8) from [<c0095890>] (sys_mount+0x8c/0xd4) [<c0095804>] (sys_mount+0x0/0xd4) from [<c0023c00>] (ret_fast_syscall+0x0/0x2c) Kernel panic - not syncing: Fatal exception The problem is that 'ubi_wl_scrub_peb()' does not expect that PEBs may be in the erroneous tree, which is a bug. This patch fixes the bug and adds corresponding check to 'ubi_wl_scrub_peb()'. Now it will simply ignore erroneous PEBs, instead of causing an oops. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-30UBI: fix kconfig unmet dependencyRandy Dunlap
warning: (OPTPROBES && KPROBES && HAVE_OPTPROBES && !PREEMPT && DEBUG_KERNEL || MTD_UBI_DEBUG && MTD && SYSFS && MTD_UBI || UBIFS_FS_DEBUG && MISC_FILESYSTEMS && UBIFS_FS || LOCKDEP && DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT || LATENCYTOP && HAVE_LATENCYTOP_SUPPORT && DEBUG_KERNEL && STACKTRACE_SUPPORT && PROC_FS) selects KALLSYMS_ALL which has unmet direct dependencies (DEBUG_KERNEL && KALLSYMS) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-30UBI: fix forward compatibilityArtem Bityutskiy
Commit 0798cea8c2e1afee59686c51d27d0e96b05e42d1 "UBI: improve corrupted flash handling" broke delet-compatible volumes handling - it introduced a limit of 8 eraseblocks which may be corrupted. And delete-compatible eraseblocks are added to the "corrupted" list, so if we'd have a large delete-compatible volume, UBI would refuse it. The fix is to add delete-compatible volumes to the erase list instead. Indeed, they are corrupted, we just have to erase them. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-30UBI: eliminate update of list_for_each_entry loop cursorJulia Lawall
list_for_each_entry uses its first argument to move from one element to the next, so modifying it can break the iteration. The variable re1 is already used within the loop as a temporary variable, and is not live here. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ iterator name list_for_each_entry; expression x,E; position p1,p2; @@ list_for_each_entry@p1(x,...) { <... x =@p2 E ...> } @@ expression x,E; position r.p1,r.p2; statement S; @@ *x =@p2 E ... list_for_each_entry@p1(x,...) S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-27mxc_nand: Do not do byte accesses to the NFC buffer.John Ogness
This patch avoids byte access to the NFC buffer. Byte access to the NFC is not allowed. The patch is against linux-next 20100618. Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-21Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd: nand: Fix probe of Samsung NAND chips mtd: nand: Fix regression in BBM detection pxa3xx: fix ns2cycle equation
2010-08-20mtd: nand: Fix probe of Samsung NAND chipsTilman Sauerbeck
Apparently, the check for a 6-byte ID string introduced by commit 426c457a3216fac74e3d44dd39729b0689f4c7ab ("mtd: nand: extend NAND flash detection to new MLC chips") is NOT sufficient to determine whether or not a Samsung chip uses their new MLC detection scheme or the old, standard scheme. This adds a condition to check cell type. Signed-off-by: Tilman Sauerbeck <tilman@code-monkey.de> Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2010-08-19mtd: nand: Fix regression in BBM detectionBrian Norris
Commit c7b28e25cb9beb943aead770ff14551b55fa8c79 ("mtd: nand: refactor BB marker detection") caused a regression in detection of factory-set bad block markers, especially for certain small-page NAND. This fix removes some unneeded constraints on using NAND_SMALL_BADBLOCK_POS, making the detection code more correct. This regression can be seen, for example, in Hynix HY27US081G1M and similar. Signed-off-by: Brian Norris <norris@broadcom.com> Tested-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-18pxa3xx: fix ns2cycle equationAxel Lin
Test on a PXA310 platform with Samsung K9F2G08X0B NAND flash, with tCH=5 and clk is 156MHz, ns2cycle(5, 156000000) returns -1. ns2cycle returns negtive value will break NDTR0_tXX macros. After checking the commit log, I found the problem is introduced by commit 5b0d4d7c8a67c5ba3d35e6ceb0c5530cc6846db7 "[MTD] [NAND] pxa3xx: convert from ns to clock ticks more accurately" To get num of clock cycles, we use below equation: num of clock cycles = time (ns) / one clock cycle (ns) + 1 We need to add 1 cycle here because integer division will truncate the result. It is possible the developers set the Min values in SPEC for timing settings. Thus the truncate may cause problem, and it is safe to add an extra cycle here. The various fields in NDTR{01} are in units of clock ticks minus one, thus we should subtract 1 cycle then. Thus the correct equation should be: num of clock cycles = time (ns) / one clock cycle (ns) + 1 - 1 = time (ns) / one clock cycle (ns) Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2010-08-17of: fix missing headers for of_address_to_resource() in MTD and SysACE driversGraeme Smecher
The drivers for Xilinx' SystemACE and physically mapped MTDs were missing prototypes for of_address_to_resource(). This patch adds the necessary headers. Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-15Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd/nand_ids: Fix buswidth mtd/m25p80: fix test for end of loop mtd/m25p80: retlen is never NULL MIPS: Fix gen_nand probe structures contents gen_nand: Test if nr_chips field is valid BFIN: Fix gen_nand probe structures contents nand/denali: move all hardware initialization work to denali_hw_init nand/denali: Add a page check in denali_read_page & denali_read_page_raw nand/denali: use cpu_relax() while waiting for hardware interrupt nand/denali: change read_status function method nand/denali: Fixed check patch warnings ARM: Fix gen_nand probe structures contents mtd/nand_base: fix kernel-doc warnings & typos nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk nand/denali: Fixed handle ECC error bugs nand/denali: use iowrite32() to replace denali_write32() nand/denali: Fixed probe function bugs
2010-08-13mtd/nand_ids: Fix buswidthBrian Norris
The buswidth for chips of ID 0xD7 is x8, not x16. This was my previous typo. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-12mtd/m25p80: fix test for end of loopDan Carpenter
"plat_id" is always non-NULL here. There is a zero element on the end of the m25p_ids[] array and if we hit the end of the loop then plat_id points to that. This would lead to a NULL pointer dereference later on in the function. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12mtd/m25p80: retlen is never NULLDan Carpenter
This is just a cleanup, it doesn't fix any bugs. These functions all check retlen inconsistently and it generates a warning in Smatch (http://smatch.sf.net). If retlen were ever NULL it would cause an oops and the code has been this way since 2006 so someone would have complained. Also I looked at other places that implemented the mtd read and write functions and they dereference retlen without checking. I removed the checks. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12gen_nand: Test if nr_chips field is validMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: move all hardware initialization work to denali_hw_initChuanxiao Dong
All hardware initialization will be done in denali_hw_init before irq handler registered Change mtd name from "DENALI NAND" to be "denali-nand" since whitespace in name can cause problems if we use cmdlinepart Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: Add a page check in denali_read_page & denali_read_page_rawChuanxiao Dong
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: use cpu_relax() while waiting for hardware interruptChuanxiao Dong
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: change read_status function methodChuanxiao Dong
In mtd->write, Denali controller will use MODE_11 mode to read NAND flash status, then return back to MODE_1O mode to do page write. Here comes a bug for this kind of using, sometimes controller will not write data to NAND and just return a good interrupt to tell driver writing work is done. The data in this page is all 0xff and this page can not be written again. The reason is unknow. So read Denali controller register WRITE_PROTECT to get NAND status instead. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: Fixed check patch warningsChuanxiao Dong
waring: no space for starting a line Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11mtd/nand_base: fix kernel-doc warnings & typosRandy Dunlap
Fix mtd/nand_base.c kernel-doc warnings and typos. Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'invert' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:2087): No description found for parameter 'len' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11mtd/nand_base: fix kernel-doc warnings & typosRandy Dunlap
Fix mtd/nand_base.c kernel-doc warnings and typos. Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'invert' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:2087): No description found for parameter 'len' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11nand/denali: use dev_xx debug function to replace nand_dbg_print and some printkChuanxiao Dong
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11nand/denali: Fixed handle ECC error bugsChuanxiao Dong
Once the last ECC error was handled, controller will triger an interrupt. If this interrupt can not be clean on time, controller may corrupt. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11nand/denali: use iowrite32() to replace denali_write32()Chuanxiao Dong
denali_write32() just implements a debug function for iowrite32(), only print out the write value. Remove this function since it's useless Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11nand/denali: Fixed probe function bugsChuanxiao Dong
Fixed a pci_resource_len function error; Changed returning sequence of probe function; Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-10Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
2010-08-10Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (79 commits) mtd: Remove obsolete <mtd/compatmac.h> include mtd: Update copyright notices jffs2: Update copyright notices mtd-physmap: add support users can assign the probe type in board files mtd: remove redwood map driver mxc_nand: Add v3 (i.MX51) Support mxc_nand: support 8bit ecc mxc_nand: fix correct_data function mxc_nand: add V1_V2 namespace to registers mxc_nand: factor out a check_int function mxc_nand: make some internally used functions overwriteable mxc_nand: rework get_dev_status mxc_nand: remove 0xe00 offset from registers mtd: denali: Add multi connected NAND support mtd: denali: Remove set_ecc_config function mtd: denali: Remove unuseful code in get_xx_nand_para functions mtd: denali: Remove device_info_tag structure mtd: m25p80: add support for the Winbond W25Q32 SPI flash chip mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chips mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chips ... Fix up trivial conflicts in drivers/mtd/maps/{Kconfig,redwood.c} due to redwood driver removal.
2010-08-08mtd: Remove obsolete <mtd/compatmac.h> includeDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-08mtd: Update copyright noticesDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2010-08-08Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (143 commits) omap: mailbox: reorganize headers omap: mailbox: standarize on 'omap-mailbox' omap: mailbox: only compile for configured archs omap: mailbox: simplify omap_mbox_register() omap: mailbox: reorganize registering omap: mailbox: add IRQ names omap: mailbox: remove unecessary fields omap: mailbox: don't export unecessary symbols omap: mailbox: update omap1 probing omap: mailbox: use correct config for omap1 omap: mailbox: 2420 should be detected at run-time omap: mailbox: reorganize structures omap: mailbox: trivial cleanups omap mailbox: Set a device in logical mbox instance for traceability omap: mailbox: convert block api to kfifo omap: mailbox: remove (un)likely macros from cold paths omap: mailbox cleanup: split MODULE_AUTHOR line omap: mailbox: convert rwlocks to spinlock Mailbox: disable mailbox interrupt when request queue Mailbox: new mutext lock for h/w mailbox configuration ...
2010-08-08mtd-physmap: add support users can assign the probe type in board filesBarry Song
There are three reasons to add this support: 1. users probably know the interface type of their flashs, then probe can be faster if they give the right type in platform data since wrong types will not be detected. 2. sometimes, detecting can cause destory to system. For example, for kernel XIP, detecting can cause NOR enter a mode instructions can not be fetched right, which will make kernel crash. 3. For a new probe which is not listed in the rom_probe_types, if users assign it in board files, physmap can still probe it. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-07block: push down BKL into .open and .releaseArnd Bergmann
The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: push down BKL into .locked_ioctlArnd Bergmann
As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: remove wrappers for request type/flagsChristoph Hellwig
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in struct requests. This allows much easier grepping for different request types instead of unwinding through macros. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-06mtd: remove redwood map driverChristian Dietrich
Removing the redwood mtd mapping driver, because all REDWOOD_[456] configuration options were removed from the kernel, because they weren't referenced anywhere. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq pcmcia: do not request windows if you don't need to pcmcia: insert PCMCIA device resources into resource tree pcmcia: export resource information to sysfs pcmcia: use struct resource for PCMCIA devices, part 2 pcmcia: remove memreq_t pcmcia: move local definitions out of include/pcmcia/cs.h pcmcia: do not use io_req_t when calling pcmcia_request_io() pcmcia: do not use io_req_t after call to pcmcia_request_io() pcmcia: use struct resource for PCMCIA devices pcmcia: clean up cs.h pcmcia: use pcmica_{read,write}_config_byte pcmcia: remove cs_types.h pcmcia: remove unused flag, simplify headers pcmcia: remove obsolete CS_EVENT_ definitions pcmcia: split up central event handler pcmcia: simplify event callback pcmcia: remove obsolete ioctl Conflicts in: - drivers/staging/comedi/drivers/* - drivers/staging/wlags49_h2/wl_cs.c due to dev_info_t and whitespace changes
2010-08-06mxc_nand: Add v3 (i.MX51) SupportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: support 8bit eccSascha Hauer
Nand devices with at least 26 bytes of oob data per 512 byte block can have 8bit ecc on v2 type controllers. This is currently not tested, but at least this patch puts the ECC_MODE bit into a well defined state. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: fix correct_data functionSascha Hauer
The v2 controller has a totally different mechanism to check whether the data we read had ecc errors or not. Implement this. The mechanism in the v2 controller happens to be identical to the v3 controller. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>