summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2012-01-09mtd: docg3: add ECC correction codeRobert Jarzmik
Credit for discovering the BCH algorith parameters, and bit reversing algorithm is to be give to Mike Dunn and Ivan Djelic. The BCH correction code relied upon the BCH library, where all data and ECC is bit-reversed. The BCH library works correctly when each input byte is bit-reversed, and accordingly ECC output is also bit-reversed. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: map erase and write functionsRobert Jarzmik
Map the developped write and erase functions into the mtd structure. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: add erase functionsRobert Jarzmik
Add erase capability to the docg3 driver. The erase block is made of 2 physical blocks, as both share all 64 pages. That makes an erase block of at least 64 kBytes. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: add write functionsRobert Jarzmik
Add write capability to the docg3 driver. The writes are possible on a single page (512 bytes + 16 bytes), even if that page is split on 2 physical pages on 2 blocks (each on one plane). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: add OOB buffer to device structureRobert Jarzmik
Add OOB buffer area to store the OOB data until the actual page is written, so that it can be completed by hardware ECC generator. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: add registers for erasing and writingRobert Jarzmik
Add the required registers and commands to erase and write flash pages / blocks. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: add OOB layout to mtdinfoRobert Jarzmik
Add OOB layout description for docg3, so that userspace can use this information to setup the data for write_oob(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: add multiple floor supportRobert Jarzmik
Add support for multiple floors, ie. cascaded docg3 chips. There might be 4 docg3 chips cascaded, sharing the same address space, and providing up to 4 times the storage capacity of a unique chip. Each floor will be seen as an independant mtd device. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: fix reading oob+data without correctionRobert Jarzmik
Fix the docg3 reads to be able to cope with all possible data buffer / oob buffer / file mode combinations from docg3_read_oob(). This especially ensures that raw reads do not use ECC corrections, and AUTOOOB and PLACEOOB do use ECC correction. The approach is to empty docg3_read() and make it a wrapper to docg3_read_oob(). As docg3_read_oob() handles all the funny cases (no data buffer but oob buffer, data buffer but no oob buffer, ...), docg3_read() is just a special use of docg3_read_oob(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: fix BCH registersRobert Jarzmik
BCH registers are contiguous, not on every byte. Fix the register definitions. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: fix protection areas readingRobert Jarzmik
The protection areas boundaries were on 16bit registers, not 8bit. This is consistent with block numbers, which can extend up to 4096 on bigger chips (and is 2048 on the docg3). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: fix tracing of IO in writebRobert Jarzmik
Writeb was incorrectly traced as a 16 bits write, instead of a 8 bits write. Fix it by tracing the correct width. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: fix debug log verbosityRobert Jarzmik
Change the NOP debug log verbosity to very verbose to unburden log analysis. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: nand: Making MTD_NAND_OMAP2 depend on ARCH_OMAP2PLUSShubhrajyoti D
Making MTD_NAND_OMAP2 depend on ARCH_OMAP2PLUS instead of oring with ARCH2/3/4. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: cfi: Allow per-mapping CFI device endiannessAaron Sierra
This patch allows each CFI device map to use its own endianness. The globally defined CFI endianness (CONFIG_MTD_CFI_NOSWAP, CONFIG_MTD_CFI_BE_BYTE_SWAP or CONFIG_MTD_CFI_LE_BYTE_SWAP) becomes the default value which can be overridden by a driver for a particular device. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: mtd_blkdevs: don't increase 'open' count on error pathBrian Norris
Some error paths in mtd_blkdevs were fixed in the following commit: commit 94735ec4044a6d318b83ad3c5794e931ed168d10 mtd: mtd_blkdevs: fix error path in blktrans_open But on these error paths, the block device's `dev->open' count is already incremented before we check for errors. This meant that, while the error path was handled correctly on the first time through blktrans_open(), the device is erroneously considered already open on the second time through. This problem can be seen, for instance, when a UBI volume is simultaneously mounted as a UBIFS partition and read through its corresponding gluebi mtdblockX device. This results in blktrans_open() passing its error checks (with `dev->open > 0') without actually having a handle on the device. Here's a summarized log of the actions and results with nandsim: # modprobe nandsim # modprobe mtdblock # modprobe gluebi # modprobe ubifs # ubiattach /dev/ubi_ctrl -m 0 ... # ubimkvol /dev/ubi0 -N test -s 16MiB ... # mount -t ubifs ubi0:test /mnt # ls /dev/mtdblock* /dev/mtdblock0 /dev/mtdblock1 # cat /dev/mtdblock1 > /dev/null cat: can't open '/dev/mtdblock4': Device or resource busy # cat /dev/mtdblock1 > /dev/null CPU 0 Unable to handle kernel paging request at virtual address fffffff0, epc == 8031536c, ra == 8031f280 Oops[#1]: ... Call Trace: [<8031536c>] ubi_leb_read+0x14/0x164 [<8031f280>] gluebi_read+0xf0/0x148 [<802edba8>] mtdblock_readsect+0x64/0x198 [<802ecfe4>] mtd_blktrans_thread+0x330/0x3f4 [<8005be98>] kthread+0x88/0x90 [<8000bc04>] kernel_thread_helper+0x10/0x18 Cc: stable@kernel.org [3.0+] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: nand: scan 1st and 2nd page for Macronix SLCBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: nand: add 512 Mbit device code (Macronix)Brian Norris
Macronix MX30LF1208AA is a 512 Mbit NAND with device code 0xF0. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: nand: add Macronix manufacturerBrian Norris
Macronix is produing SLC NAND MX30LF1208AA, so add their manufacturer code to the manufacturer lists. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-08Merge branch 'for-linus2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-07Merge branch 'depends/rmk/restart' into next/cleanupArnd Bergmann
Conflicts: arch/arm/mach-at91/at91cap9.c arch/arm/mach-at91/at91sam9260.c arch/arm/mach-at91/at91sam9261.c arch/arm/mach-at91/at91sam9263.c arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-at91/at91sam9rl.c arch/arm/mach-exynos/cpu.c arch/arm/mach-shmobile/board-kota2.c This resolves a bunch of conflicts between the arm-soc tree and changes from the arm tree that have gone upstream. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-05UBI: fix use-after-free on error pathArtem Bityutskiy
When we fail to erase a PEB, we free the corresponding erase entry object, but then re-schedule this object if the error code was something like -EAGAIN. Obviously, it is a bug to use the object after we have freed it. Reported-by: Emese Revfy <re.emese@gmail.com> Cc: stable@kernel.org [v2.6.23+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-01-03fs: move code out of buffer.cAl Viro
Move invalidate_bdev, block_sync_page into fs/block_dev.c. Export kill_bdev as well, so brd doesn't have to open code it. Reduce buffer_head.h requirement accordingly. Removed a rather large comment from invalidate_bdev, as it looked a bit obsolete to bother moving. The small comment replacing it says enough. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03Merge branch 'mxs/clk-prepare' of ↵Arnd Bergmann
git://git.linaro.org/people/shawnguo/linux-2.6 into imx/clk
2011-12-28mtd: gpmi-lib: convert to clk_prepare/clk_unprepareShawn Guo
The patch converts gpmi nand driver to clk_prepare/clk_unprepare by using helper functions clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Huang Shijie <b32955@freescale.com> Cc: Artem Bityutskiy <artem.bityutskiy@intel.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2011-12-23mtd: gpmi-nand: move to dma_transfer_directionShawn Guo
This patch fixes usage of dma direction to adopt dma_transfer_direction. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-19mtd: plat_ram: call mtd_device_register only if partition data existsIlya Yanok
mtd_device_parse_register() registers the device as a whole if no partition data is passed so there is no reason to call mtd_device_register() after that. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-12-08MTD: nand: make au1550nd.c a platform_driverManuel Lauss
Transform the au1550nd.c driver into a platform_driver and hook it up in the PB1550 board (gen_nand works fine on the DB1550, but since I don't have a PB1550 to test this driver stays for now). Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mtd@lists.infradead.org To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2875/ Patchwork: https://patchwork.linux-mips.org/patch/3160/ Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07mtd: pxa2xx-flash.c: It used to fall back to provided table.Jonathan Cameron
Make this work again. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-12-05mtd: gpmi: add missing include 'module.h'Wolfram Sang
Fixes: drivers/mtd/nand/gpmi-nand/gpmi-nand.c: In function 'gpmi_nfc_init': drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1475:16: error: 'THIS_MODULE' undeclared (first use in this function) drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1475:16: note: each undeclared identifier is reported only once for each function it appears in drivers/mtd/nand/gpmi-nand/gpmi-nand.c: At top level: drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1617:15: error: expected declaration specifiers or '...' before string constant drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1617:1: warning: data definition has no type or storage class drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1617:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' and some more... Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-12-02mtd: ndfc: fix typo in structure dereferenceTony Breeds
In commit 9d7948c50055e74b693ce9e99a709b2e5bbc1942 (mtd: ndfc: use ofpart through generic parsing) we dereference a non pointer type causing the following compiler error: drivers/mtd/nand/ndfc.c: In function 'ndfc_chip_init': drivers/mtd/nand/ndfc.c:191: error: invalid type argument of '->' (have 'struct mtd_part_parser_data') Fix that. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-11-30UBI: fix missing scrub when there is a bit-flipBhavesh Parekh
Under some cases, when scrubbing the PEB if we did not get the lock on the PEB it fails to scrub. Add that PEB again to the scrub list Artem: minor amendments. Cc: stable@kernel.org [2.6.31+] Signed-off-by: Bhavesh Parekh <bparekh@nvidia.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-11-29ARM: at91/nand: use gpio_is_valid to check the gpioJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-18USB: convert some miscellanies drivers to use module_usb_driver()Greg Kroah-Hartman
This converts the remaining USB drivers in the kernel to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Till Harbaum <till@harbaum.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13mtd: drop select of MTD_PARTITIONSPaul Bolle
MTD_PARTITIONS got killed in commit 6a8a98b22b. This means that since v3.0 this Kconfig symbol doesn't exist anymore. Apparently selecting a non-existant symbol is a nop. Drop that select. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-07MTD: MAPS: bcm963xx-flash.c: explicitly include module.hJonas Gorski
module.h was previously implicitly included through mtd/mtd.h. Fixes the following build failure after the module.h cleanup: CC drivers/mtd/maps/bcm963xx-flash.o drivers/mtd/maps/bcm963xx-flash.c: In function 'bcm963xx_probe': drivers/mtd/maps/bcm963xx-flash.c:208:29: error: 'THIS_MODULE' undeclared (first use in this function) [...] drivers/mtd/maps/bcm963xx-flash.c:276:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/mtd/maps/bcm963xx-flash.c:276:15: warning: function declaration isn't a prototype make[7]: *** [drivers/mtd/maps/bcm963xx-flash.o] Error 1 Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-11-02filesystems: add missing nlink wrappersMiklos Szeredi
Replace direct i_nlink updates with the respective updater function (inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2011-10-31mtd: Add module.h to drivers users that were implicitly using it.Paul Gortmaker
We are cleaning up the implicit presence of module.h that these drivers are taking advantage of. Fix them in advance of the cleanup operation. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31mtd: Add export.h for EXPORT_SYMBOL/THIS_MODULE where neededPaul Gortmaker
These two common macros will be no longer present everywhere. Call out the include needs of them explicitly where required. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-30mtd: tests: annotate as DANGEROUS in KconfigWolfram Sang
The tests may erase mtd devices, so annotate them as suggested per coding style and add a paragraph to the help text as well. Artem: amended the help test a bit. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
2011-10-30mtd: tests: don't use mtd0 as a defaultWolfram Sang
mtd tests may erase the mtd device, so force the user to specify which mtd device to test by using the module parameter. Disable the default (using mtd0) since this may destroy a vital part of the flash if the module is inserted accidently or carelessly. Reported-by: Roland Kletzing <devzero@web.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
2011-10-30mtd: clean up usage of MTD_DOCPROBE_ADDRESSPaul Bolle
Depending on whether MTD_DOCPROBE_ADVANCED is set or not, MTD_DOCPROBE_ADDRESS will default to either 0x0000 or 0. That should lead to (basically) identical code in docprobe.c. The current two defaults should be merged. And, while we're at it, if MTD_DOCPROBE is set MTD_DOCPROBE_ADDRESS will always be set. (MTD_DOCPROBE_ADDRESS depends on MTD_DOCPROBE and it has a default value.) So the check whether CONFIG_MTD_DOCPROBE_ADDRESS is defined is unnecessary and should be dropped. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-24MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss
Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: kill au1xxx.h headerManuel Lauss
No longer required Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 02:19:59 +0000