summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2014-01-07mtd: atmel_nand: use dev_err() instead of printk()Jingoo Han
Use dev_err() instead of printk() to provide a better message to userspace. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-07mtd: sh_flctl: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-07mtd: s3c2410: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-07mtd: mpc5121_nfc: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-07mtd: lpc32xx_slc: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-07mtd: lpc32xx_mlc: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-07mtd: nand-gpio: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-07mtd: fsmc_nand: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-06Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Another set of small fixes for ARM, covering various areas. Laura fixed a long standing issue with virt_addr_valid() failing to handle holes in memory. Steve found a problem with dcache flushing for compound pages. I fixed another bug in footbridge stuff causing time to tick slowly, and also a problem with the AES code which can cause linker errors. A patch from Rob which fixes Xen problems induced by a lack of consistency in our naming of ioremap_cache() - which thankfully has very few users" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 7933/1: rename ioremap_cached to ioremap_cache ARM: fix "bad mode in ... handler" message for undefined instructions CRYPTO: Fix more AES build errors ARM: 7931/1: Correct virt_addr_valid ARM: 7923/1: mm: fix dcache flush logic for compound high pages ARM: fix footbridge clockevent device
2014-01-05ARM: 7933/1: rename ioremap_cached to ioremap_cacheRob Herring
ioremap_cache is more aligned with other architectures. There are only 2 users of this in the kernel: pxa2xx-flash and Xen. This fixes Xen build failures on arm64: drivers/tty/hvc/hvc_xen.c:233:2: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] drivers/xen/grant-table.c:1174:3: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] drivers/xen/xenbus/xenbus_probe.c:778:4: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-03mtd: davinci_nand: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: txx9ndfmc: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: jz4740_nand: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: fsl_ifc_nand: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: fsl_elbc_nand: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: diskonchip: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: cs553x_nand: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: cmx270_nand: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: cafe_nand: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: bf5xx_nand: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: au1550nd: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: sharpsl: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: orion_nand: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: atmel_nand: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: tmio_nand: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nuc900_nand: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: lpc32xx_slc: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: denali_dt: Use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: lantiq-flash: Use devm_kzalloc()Jingoo Han
Use devm_kzalloc() to make cleanup paths simpler. Also, checking return value of devm_kzalloc() is added in order to check if the allocation succeded. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: docg3: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: pxa3xx: Consolidate ECC initializationEzequiel Garcia
In order to avoid code duplication, let's consolidate the ECC setting for all SoC variants. Such decision is based on page size and ECC strength requirements. Also, provide a default value for the case where such ECC information is not provided (non-ONFI devices). Tested-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: pxa3xx: Use extended cmdfunc() only if neededEzequiel Garcia
Currently, we have two different cmdfunc's implementations: one for PXA3xx SoC variant and one for Armada 370/XP SoC variant. The former is the legacy one, typically constrained to devices with page sizes smaller or equal to the controller's FIFO buffer. On the other side, the latter _only_ supports the so-called extended command semantics, which allow to handle devices with larger page sizes (4 KiB, 8 KiB, ...). This means we currently don't support devices with smaller pages on the A370/XP SoC. Fix it by first renaming the cmdfuncs variants, and then make the choice based on device page size (and SoC variant), rather than SoC variant alone. While at it, add a check for page size, to make sure we don't allow larger pages sizes on the PXA3xx variant. Tested-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: pxa3xx: Clear need_wait flag when starting a commandEzequiel Garcia
Currently the driver assumes all commands will eventually trigger a RnB transition, and thus a "device is ready" IRQ. This assumption means that on every issued command, the dev_ready completion handler is init'ed and the need_wait flag is set. However this is incorrect: some commands (such as NAND_CMD_STATUS) don't make the device 'busy' and thus a RnB transition never occurs. Given, the NAND core never calls waitfunc() after such commands, this is not a problem. Therefore, it's possible to only clear the need_wait flag on every command that is started. This fixes a current bug that can be reproduced on PXA boards by writing blank (all 0xff'ed) to a page: 1. The kernel issues NAND_CMD_STATUS and sets need_wait=1. The flag won't be cleared for this command since no RnB transition is involved. 2. NAND_CMD_PAGEPROG is issued but since the data is blank, the driver decides not to execute the command (and no IRQ activity is involved). 3. The NAND core calls waitfunc() and waits for the dev_ready completion, which will never end since the device _is_ already ready. Tested-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: denali: Mark function is_erased() as staticRashika Kheria
This patch marks the function is_erased() as static in denali.c because it is not used outside this file. This patch elimiates the following warning in nand/denali.c: drivers/mtd/nand/denali.c:900:6: warning: no previous prototype for ‘is_erased’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: lpddr: Mark functions as static and remove unused functionRashika Kheria
This patch marks the functions do_write_buffer() and do_erase_oneblock() as static because because they are not used outside this file. It also removes the unused function word_program() in lpddr/lpddr_cmds.c. Thus, it also removes the following warnings in lpddr/lpddr_cmds.c: drivers/mtd/lpddr/lpddr_cmds.c:391:5: warning: no previous prototype for ‘do_write_buffer’ [-Wmissing-prototypes] drivers/mtd/lpddr/lpddr_cmds.c:472:5: warning: no previous prototype for ‘do_erase_oneblock’ [-Wmissing-prototypes] drivers/mtd/lpddr/lpddr_cmds.c:751:5: warning: no previous prototype for ‘word_program’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: lpc32xx_mlc: drop custom write_page callbackBrian Norris
This driver doesn't need its own custom chip->write_page callback; the only "custom" requirement is that this driver does not support subpage writes, which we can avoid using the NAND_NO_SUBPAGE_WRITE flag. With NAND_NO_SUBPAGE_WRITE, the default routine (nand_write_page()) should perform the equivalent operations. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Tested-by: Roland Stigge <stigge@antcom.de>
2014-01-03mtd: nand: davinci: don't request AEMIF address rangeIvan Khoronzhuk
The TI AEMIF driver registers are used to setup timings for each chip select. The same registers range is used to setup NAND settings. The AEMIF and NAND drivers not use the same registers in this range. In case with TI AEMIF driver, the memory address range is requested already by AEMIF, so we cannot request it twice, just ioremap. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Taras Kondratiuk <taras@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: davinci: reuse driver for Keystone archIvan Khoronzhuk
The Keystone arch has compatible nand device, so reuse it. In case with Keystone it depends on TI_AEMIF because AEMIF driver is responsible to set timings. See http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Taras Kondratiuk <taras@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: davinci: adjust DT properties to MTD genericIvan Khoronzhuk
The properties davinci-ecc-mode, davinci-nand-use-bbt, davinci-nand-buswidth are MTD generic. Correct names for them are: nand-ecc-mode, nand-on-flash-bbt, nand-bus-width accordingly. So rename them in dts and documentation. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Taras Kondratiuk <taras@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: davinci: simplify error handlingIvan Khoronzhuk
There is not needed to use a lot of names for err handling. It complicates code support and reading. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Taras Kondratiuk <taras@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: davinci: check required ti,davinci-chipselect propertyIvan Khoronzhuk
The property "ti,davinci-chipselect" is required. So we have to check if it is set. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Taras Kondratiuk <taras@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: davinci: return ENOMEM if memory allocation is failedIvan Khoronzhuk
In case when memory allocation is failed the driver should return ENOMEM instead of ENODEV. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Taras Kondratiuk <taras@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: davinci: fix driver registrationIvan Khoronzhuk
When kernel is booted using DT, there is no guarantee that Davinci NAND device has been created already at the time when driver init function is executed. Therefore, platform_driver_probe() can't be used because this may result the Davinci NAND driver will never be probed. The driver probing has to be made with core mechanism. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Taras Kondratiuk <taras@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: au1550nd: add missing platform_set_drvdata()Wei Yongjun
Add missing platform_set_drvdata() in au1550nd_probe(), otherwise calling platform_get_drvdata() in remove returns NULL. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: mxc_nand: add missing clk_disable_unprepare() in mxcnd_remove()Wei Yongjun
clock source is prepared and enabled by clk_prepare_enable() in mxcnd_probe() function, but no disable/unprepare in mxcnd_remove(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: sh_flctl: Remove unneeded CONFIG_OFEzequiel Garcia
Since the of_mtd header provides dummy stubs for !CONFIG_OF, it's safe to remove the #ifdef CONFIG_OF. Build tested only. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: denali: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: sh_flctl: use devm_* managed allocatorsLaurent Pinchart
This simplifies error and cleanup code paths. Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: sh_flctl: fix warnings due to improper castsLaurent Pinchart
Cast pointers to uintptr_t instead of unsigned int. This fixes warnings on platforms where pointers have a different size than int. Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: sh_flctl: enable driver compilation with COMPILE_TESTLaurent Pinchart
This helps increasing build testing coverage. Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-14 10:08:42 +0000