summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2010-10-24mtd: m25p80: Add support for two new Spansion SPI devices (S25FL-K)Gernot Hoyler
This patch adds support for Spansion S25FL016K and S25FL064K SPI flash. It has been tested with physical devices. Note that both parts exhibit a Winbond manufacturer ID so they might also be added to that section. Signed-off-by: Gernot Hoyler <Gernot.Hoyler@spansion.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: split ONFI detection logic to its own functionFlorian Fainelli
In order to reduce the indentation and improve the readability of nand_get_ flash_type, split the ONFI detection logic to its own function. The detection logic inside nand_flash_detect_onfi is also rewritten to allow for less indentation. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: add support for reading ONFI parameters from NAND deviceFlorian Fainelli
This patch adds support for reading NAND device ONFI parameters and use the ONFI informations to define its geometry. In case the device supports ONFI, the onfi_version field in struct nand_chip contains the version (BCD) and the onfi_params structure can be used by drivers to set up timings and such. We currently only support ONFI 1.0 parameters. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: denali should also handle NAND_CMD_PARAMFlorian Fainelli
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: OneNAND: Remove unused cmd_map at s5pc110Kyungmin Park
S5PC110 OneNAND controller use the generic functions provided from onenand_base. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: Samsung MLC - new OOB sizesBrian Norris
There are some additions to the detection scheme used by Samsung MLC NAND. These simple changes to support the 400- and 436-byte OOB are found in the following data sheet: Samsung K9GBG08U0M (p.40) Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: davinci: fix comment to match the codeWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: pcmciamtd: remove dead codeDan Carpenter
This code isn't reachable. I looked through the git history and it hasn't been reachable for years. Someone removed the label to silence gcc's unused label warning but these few lines accidentally got left behind. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: mpc5121_nfc: fix memory leak on error pathJulia Lawall
Add a call to of_node_put in the error handling code following a call to of_find_compatible_node. Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: pxa3xx_nand: set oob length in the runtimeLei Wen
For different command need different oob requirement, set the proper oob length by different cmd. Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: pxa3xx_nand: remove the flash info in driver structureLei Wen
After probe, all info already transfer to driver structure. There is no need to keep the original flash info. So that we could safely free the flash info in memory, which may grows larger when more flash is suported. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: pxa3xx_nand: introduce default timing to reduce read id timesLei Wen
We certainly don't need to send read id command times by times, since we already know what the id is after the first read id... So create a default timing which could ensure it would successfully read id out all supported chip. Then follow the build-in table to reconfigure the timing. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: pxa3xx_nand: condense the flash definitionLei Wen
Adding a new flash definition would need less code. Keep the platform passing flash definition method. If one flash is both defined in platform data and builtin table, driver would select the one from platform data first. By this way, platform could select the timing most suit for itself, not need to follow the common settings. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: support new Toshiba SLCBrian Norris
Toshiba does not use ONFI for their NAND flash. So we have to continue to add new IDs used by Toshiba devices as well as heuristic detection for scanning the 2nd page for a BBM. This is a relatively harmless start at supporting many of them. These chips mostly follow the same ID fields of previous generations, but there is a need for a tweak. These chips introduce a strange 576 byte OOB (that's 36 bytes per 512 bytes of page). In the preliminary data, Toshiba has not defined exactly how their ID strings should decode. In the future, a new tweak must be added. Data is taken from, among others, Toshiba TC58TxG4S2FBAxx Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: cleanup Kconfig dependenciesH Hartley Sweeten
Remove the MTD!=n dependency since that is handled by drivers/mtd/Kconfig. Simplify the dependency checks for mtd/chips by using if/endif blocks. Remove all default n since that is the Kconfig default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: edit comments on deprecation of ioctl ECCGETLAYOUTBrian Norris
There were some improvements and additions necessary in the comments explaining of the expansion of nand_ecclayout, the introduction of nand_ecclayout_user, and the deprecation of the ioctl ECCGETLAYOUT. Also, I found a better placement for the macro MTD_MAX_ECCPOS_ENTRIES; next to the definition of MTD_MAX_OOBFREE_ENTRIES in mtd-abi.h. The macro is really only important for the ioctl code (found in drivers/mtd/mtdchar.c) but since there are small edits being made to the user-space header, I figured this is a better location. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: expand nand_ecc_layout, deprecate ioctl ECCGETLAYOUTBrian Norris
struct nand_ecclayout is too small for many new chips; OOB regions can be as large as 448 bytes and may increase more in the future. Thus, copying that struct to user-space with the ECCGETLAYOUT ioctl is not a good idea; the ioctl would have to be updated every time there's a change to the current largest size. Instead, the old nand_ecclayout is renamed to nand_ecclayout_user and a new struct nand_ecclayout is created that can accomodate larger sizes and expand without affecting the user-space. struct nand_ecclayout can still be used in board drivers without modification -- at least for now. A new function is provided to convert from the new to the old in order to allow the deprecated ioctl to continue to work with truncated data. Perhaps the ioctl, the conversion process, and the struct nand_ecclayout_user can be removed altogether in the future. Note: There are comments in nand/davinci_nand.c::nand_davinci_probe() regarding this issue; this driver (and maybe others) can be updated to account for extra space. All kernel drivers can use the expanded nand_ecclayout as a drop-in replacement and ignore its benefits. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: spansion S30MLxxxP supportBrian Norris
Some Spansion chips have a method for determining eraseblock size that is incompatible with similar ID chips of other sizes. This implements some heuristic detection of these differences. This patch checks for a 5-byte ID with trailing zeros as well as a 512-byte page size to ensure that chips are not misdetected as the S30MLxxxP ORNAND series. [Tweaked by Artem a bit] Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: fix callback return value checkBaruch Siach
Drivers may (and do) return negative errno values other than -1 from the ecc.correct callback. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-14Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd: pxa3xx: fix build error when CONFIG_MTD_PARTITIONS is not defined mtd: mxc_nand: configure pages per block for v2 controller mtd: OneNAND: Fix loop hang when DMA error at Samsung SoCs mtd: OneNAND: Fix 2KiB pagesize handling at Samsung SoCs mtd: Blackfin NFC: fix invalid free in remove() mtd: Blackfin NFC: fix build error after nand_scan_ident() change mxc_nand: Do not do byte accesses to the NFC buffer.
2010-09-13mtd: pxa3xx: fix build error when CONFIG_MTD_PARTITIONS is not definedMark F. Brown
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: mxc_nand: configure pages per block for v2 controllerSascha Hauer
This patch initializes the pages per block field in CONFIG1 for v2 controllers. It also sets the FP_INT field. This is the last field not correctly initialized, so we can switch from read/modify/write the CONFIG1 reg to just write the correct value. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: John Ogness <john.ogness@linutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: OneNAND: Fix loop hang when DMA error at Samsung SoCsKyungmin Park
When DMA error occurs. it's loop hang since it can't exit the loop. and it's the right DMA handling code as Spec. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: OneNAND: Fix 2KiB pagesize handling at Samsung SoCsKyungmin Park
Wrong assumption bufferram can be switched between BufferRAM0 and BufferRAM1 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: Blackfin NFC: fix invalid free in remove()Mike Frysinger
Since info->mtd isn't dynamically allocated, we shouldn't attempt to kfree() it. Otherwise we get random fun corruption when unloading the driver built as a module. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: Blackfin NFC: fix build error after nand_scan_ident() changeMike Frysinger
Seems some patches got out sync when being merged. The Blackfin NFC driver was updated to use nand_scan_ident(), but it missed the change where nand_scan_ident() now takes 3 arguments. So update this driver to fix build failures. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-30UBI: do not oops when erroneous PEB is scheduled for scrubbingArtem Bityutskiy
When an erroneous PEB is scheduling for scrubbing, we end up with the following oops: [<c0162404>] (prot_queue_del+0x0/0x50) from [<c01635b4>] (ubi_wl_scrub_peb+0xec/0x13c) [<c01634c8>] (ubi_wl_scrub_peb+0x0/0x13c) from [<c01603bc>] (ubi_eba_read_leb+0x200/0x428) [<c01601bc>] (ubi_eba_read_leb+0x0/0x428) from [<c015e3c0>] (ubi_leb_read+0xe8/0x138) [<c015e2d8>] (ubi_leb_read+0x0/0x138) from [<c00d6918>] (ubifs_start_scan+0x7c/0xf4) [<c00d689c>] (ubifs_start_scan+0x0/0xf4) from [<c00e3650>] (ubifs_recover_leb+0x3c/0x730) [<c00e3614>] (ubifs_recover_leb+0x0/0x730) from [<c00e444c>] (ubifs_recover_log_leb+0xc8/0x2dc) [<c00e4384>] (ubifs_recover_log_leb+0x0/0x2dc) from [<c00d7c20>] (ubifs_replay_journal+0xb90/0x13a4) [<c00d7090>] (ubifs_replay_journal+0x0/0x13a4) from [<c00cdd68>] (ubifs_fill_super+0xb84/0x1054) [<c00cd1e4>] (ubifs_fill_super+0x0/0x1054) from [<c00ced04>] (ubifs_get_sb+0xc4/0x2ac) [<c00cec40>] (ubifs_get_sb+0x0/0x2ac) from [<c007f04c>] (vfs_kern_mount+0x58/0x94) [<c007eff4>] (vfs_kern_mount+0x0/0x94) from [<c007f0e8>] (do_kern_mount+0x40/0xe8) [<c007f0a8>] (do_kern_mount+0x0/0xe8) from [<c0095628>] (do_new_mount+0x68/0x8c) [<c00955c0>] (do_new_mount+0x0/0x8c) from [<c00957a8>] (do_mount+0x15c/0x1b8) [<c009564c>] (do_mount+0x0/0x1b8) from [<c0095890>] (sys_mount+0x8c/0xd4) [<c0095804>] (sys_mount+0x0/0xd4) from [<c0023c00>] (ret_fast_syscall+0x0/0x2c) Kernel panic - not syncing: Fatal exception The problem is that 'ubi_wl_scrub_peb()' does not expect that PEBs may be in the erroneous tree, which is a bug. This patch fixes the bug and adds corresponding check to 'ubi_wl_scrub_peb()'. Now it will simply ignore erroneous PEBs, instead of causing an oops. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-30UBI: fix kconfig unmet dependencyRandy Dunlap
warning: (OPTPROBES && KPROBES && HAVE_OPTPROBES && !PREEMPT && DEBUG_KERNEL || MTD_UBI_DEBUG && MTD && SYSFS && MTD_UBI || UBIFS_FS_DEBUG && MISC_FILESYSTEMS && UBIFS_FS || LOCKDEP && DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT || LATENCYTOP && HAVE_LATENCYTOP_SUPPORT && DEBUG_KERNEL && STACKTRACE_SUPPORT && PROC_FS) selects KALLSYMS_ALL which has unmet direct dependencies (DEBUG_KERNEL && KALLSYMS) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-30UBI: fix forward compatibilityArtem Bityutskiy
Commit 0798cea8c2e1afee59686c51d27d0e96b05e42d1 "UBI: improve corrupted flash handling" broke delet-compatible volumes handling - it introduced a limit of 8 eraseblocks which may be corrupted. And delete-compatible eraseblocks are added to the "corrupted" list, so if we'd have a large delete-compatible volume, UBI would refuse it. The fix is to add delete-compatible volumes to the erase list instead. Indeed, they are corrupted, we just have to erase them. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-30UBI: eliminate update of list_for_each_entry loop cursorJulia Lawall
list_for_each_entry uses its first argument to move from one element to the next, so modifying it can break the iteration. The variable re1 is already used within the loop as a temporary variable, and is not live here. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ iterator name list_for_each_entry; expression x,E; position p1,p2; @@ list_for_each_entry@p1(x,...) { <... x =@p2 E ...> } @@ expression x,E; position r.p1,r.p2; statement S; @@ *x =@p2 E ... list_for_each_entry@p1(x,...) S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-27mxc_nand: Do not do byte accesses to the NFC buffer.John Ogness
This patch avoids byte access to the NFC buffer. Byte access to the NFC is not allowed. The patch is against linux-next 20100618. Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-21Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd: nand: Fix probe of Samsung NAND chips mtd: nand: Fix regression in BBM detection pxa3xx: fix ns2cycle equation
2010-08-20mtd: nand: Fix probe of Samsung NAND chipsTilman Sauerbeck
Apparently, the check for a 6-byte ID string introduced by commit 426c457a3216fac74e3d44dd39729b0689f4c7ab ("mtd: nand: extend NAND flash detection to new MLC chips") is NOT sufficient to determine whether or not a Samsung chip uses their new MLC detection scheme or the old, standard scheme. This adds a condition to check cell type. Signed-off-by: Tilman Sauerbeck <tilman@code-monkey.de> Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2010-08-19mtd: nand: Fix regression in BBM detectionBrian Norris
Commit c7b28e25cb9beb943aead770ff14551b55fa8c79 ("mtd: nand: refactor BB marker detection") caused a regression in detection of factory-set bad block markers, especially for certain small-page NAND. This fix removes some unneeded constraints on using NAND_SMALL_BADBLOCK_POS, making the detection code more correct. This regression can be seen, for example, in Hynix HY27US081G1M and similar. Signed-off-by: Brian Norris <norris@broadcom.com> Tested-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-18pxa3xx: fix ns2cycle equationAxel Lin
Test on a PXA310 platform with Samsung K9F2G08X0B NAND flash, with tCH=5 and clk is 156MHz, ns2cycle(5, 156000000) returns -1. ns2cycle returns negtive value will break NDTR0_tXX macros. After checking the commit log, I found the problem is introduced by commit 5b0d4d7c8a67c5ba3d35e6ceb0c5530cc6846db7 "[MTD] [NAND] pxa3xx: convert from ns to clock ticks more accurately" To get num of clock cycles, we use below equation: num of clock cycles = time (ns) / one clock cycle (ns) + 1 We need to add 1 cycle here because integer division will truncate the result. It is possible the developers set the Min values in SPEC for timing settings. Thus the truncate may cause problem, and it is safe to add an extra cycle here. The various fields in NDTR{01} are in units of clock ticks minus one, thus we should subtract 1 cycle then. Thus the correct equation should be: num of clock cycles = time (ns) / one clock cycle (ns) + 1 - 1 = time (ns) / one clock cycle (ns) Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2010-08-17of: fix missing headers for of_address_to_resource() in MTD and SysACE driversGraeme Smecher
The drivers for Xilinx' SystemACE and physically mapped MTDs were missing prototypes for of_address_to_resource(). This patch adds the necessary headers. Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-15Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd/nand_ids: Fix buswidth mtd/m25p80: fix test for end of loop mtd/m25p80: retlen is never NULL MIPS: Fix gen_nand probe structures contents gen_nand: Test if nr_chips field is valid BFIN: Fix gen_nand probe structures contents nand/denali: move all hardware initialization work to denali_hw_init nand/denali: Add a page check in denali_read_page & denali_read_page_raw nand/denali: use cpu_relax() while waiting for hardware interrupt nand/denali: change read_status function method nand/denali: Fixed check patch warnings ARM: Fix gen_nand probe structures contents mtd/nand_base: fix kernel-doc warnings & typos nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk nand/denali: Fixed handle ECC error bugs nand/denali: use iowrite32() to replace denali_write32() nand/denali: Fixed probe function bugs
2010-08-13mtd/nand_ids: Fix buswidthBrian Norris
The buswidth for chips of ID 0xD7 is x8, not x16. This was my previous typo. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-12mtd/m25p80: fix test for end of loopDan Carpenter
"plat_id" is always non-NULL here. There is a zero element on the end of the m25p_ids[] array and if we hit the end of the loop then plat_id points to that. This would lead to a NULL pointer dereference later on in the function. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12mtd/m25p80: retlen is never NULLDan Carpenter
This is just a cleanup, it doesn't fix any bugs. These functions all check retlen inconsistently and it generates a warning in Smatch (http://smatch.sf.net). If retlen were ever NULL it would cause an oops and the code has been this way since 2006 so someone would have complained. Also I looked at other places that implemented the mtd read and write functions and they dereference retlen without checking. I removed the checks. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12gen_nand: Test if nr_chips field is validMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: move all hardware initialization work to denali_hw_initChuanxiao Dong
All hardware initialization will be done in denali_hw_init before irq handler registered Change mtd name from "DENALI NAND" to be "denali-nand" since whitespace in name can cause problems if we use cmdlinepart Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: Add a page check in denali_read_page & denali_read_page_rawChuanxiao Dong
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: use cpu_relax() while waiting for hardware interruptChuanxiao Dong
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: change read_status function methodChuanxiao Dong
In mtd->write, Denali controller will use MODE_11 mode to read NAND flash status, then return back to MODE_1O mode to do page write. Here comes a bug for this kind of using, sometimes controller will not write data to NAND and just return a good interrupt to tell driver writing work is done. The data in this page is all 0xff and this page can not be written again. The reason is unknow. So read Denali controller register WRITE_PROTECT to get NAND status instead. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12nand/denali: Fixed check patch warningsChuanxiao Dong
waring: no space for starting a line Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11mtd/nand_base: fix kernel-doc warnings & typosRandy Dunlap
Fix mtd/nand_base.c kernel-doc warnings and typos. Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'invert' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:2087): No description found for parameter 'len' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11mtd/nand_base: fix kernel-doc warnings & typosRandy Dunlap
Fix mtd/nand_base.c kernel-doc warnings and typos. Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'invert' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:2087): No description found for parameter 'len' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11nand/denali: use dev_xx debug function to replace nand_dbg_print and some printkChuanxiao Dong
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-02 21:19:38 +0000