summaryrefslogtreecommitdiffstats
path: root/drivers/net/3c59x.c
AgeCommit message (Collapse)Author
2010-11-183c59x: fix build failure on !CONFIG_PCINamhyung Kim
VORTEX_PCI() could return NULL so it needs to be casted before accessing any member of struct pci_dev. This fixes following build failure. Likewise VORTEX_EISA() was changed also. CC [M] drivers/net/3c59x.o drivers/net/3c59x.c: In function 'acpi_set_WOL': drivers/net/3c59x.c:3211:39: warning: dereferencing 'void *' pointer drivers/net/3c59x.c:3211:39: error: request for member 'current_state' in something not a structure or union make[3]: *** [drivers/net/3c59x.o] Error 1 make[2]: *** [drivers/net/3c59x.o] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/ipv4/Kconfig net/ipv4/tcp_timer.c
2010-09-273c59x: fix regression from patch "Add ethtool WOL support"Jan Beulich
This patch (commit 690a1f2002a3091bd18a501f46c9530f10481463) added a new call site for acpi_set_WOL() without checking that the function is actually suitable to be called via vortex_set_wol+0xcd/0xe0 [3c59x] dev_ethtool+0xa5a/0xb70 dev_ioctl+0x2e0/0x4b0 T.961+0x49/0x50 sock_ioctl+0x47/0x290 do_vfs_ioctl+0x7f/0x340 sys_ioctl+0x80/0xa0 system_call_fastpath+0x16/0x1b i.e. outside of code paths run when the device is not yet enabled or already disabled. In particular, putting the device into D3hot is a pretty bad idea when it was already brought up. Furthermore, all prior callers of the function made sure they're actually dealing with a PCI device, while the newly added one didn't. In the same spirit, the .get_wol handler shouldn't indicate support for WOL for non-PCI devices. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/qlcnic/qlcnic_init.c net/ipv4/ip_output.c
2010-09-153c59x: Remove atomic context inside vortex_{set|get}_wolDenis Kirjanov
There is no need to use spinlocks in vortex_{set|get}_wol. This also fixes a bug: [ 254.214993] 3c59x 0000:00:0d.0: PME# enabled [ 254.215021] BUG: sleeping function called from invalid context at kernel/mutex.c:94 [ 254.215030] in_atomic(): 0, irqs_disabled(): 1, pid: 4875, name: ethtool [ 254.215042] Pid: 4875, comm: ethtool Tainted: G W 2.6.36-rc3+ #7 [ 254.215049] Call Trace: [ 254.215050] [] __might_sleep+0xb1/0xb6 [ 254.215050] [] mutex_lock+0x17/0x30 [ 254.215050] [] acpi_enable_wakeup_device_power+0x2b/0xb1 [ 254.215050] [] acpi_pm_device_sleep_wake+0x42/0x7f [ 254.215050] [] acpi_pci_sleep_wake+0x5d/0x63 [ 254.215050] [] platform_pci_sleep_wake+0x1d/0x20 [ 254.215050] [] __pci_enable_wake+0x90/0xd0 [ 254.215050] [] acpi_set_WOL+0x8e/0xf5 [3c59x] [ 254.215050] [] vortex_set_wol+0x4e/0x5e [3c59x] [ 254.215050] [] dev_ethtool+0x1cf/0xb61 [ 254.215050] [] ? debug_mutex_free_waiter+0x45/0x4a [ 254.215050] [] ? __mutex_lock_common+0x204/0x20e [ 254.215050] [] ? __mutex_lock_slowpath+0x12/0x15 [ 254.215050] [] ? mutex_lock+0x23/0x30 [ 254.215050] [] dev_ioctl+0x42c/0x533 [ 254.215050] [] ? _cond_resched+0x8/0x1c [ 254.215050] [] ? lock_page+0x1c/0x30 [ 254.215050] [] ? page_address+0x15/0x7c [ 254.215050] [] ? filemap_fault+0x187/0x2c4 [ 254.215050] [] sock_ioctl+0x1d4/0x1e0 [ 254.215050] [] ? sock_ioctl+0x0/0x1e0 [ 254.215050] [] vfs_ioctl+0x19/0x33 [ 254.215050] [] do_vfs_ioctl+0x424/0x46f [ 254.215050] [] ? selinux_file_ioctl+0x3c/0x40 [ 254.215050] [] sys_ioctl+0x40/0x5a [ 254.215050] [] sysenter_do_call+0x12/0x22 vortex_set_wol protected with a spinlock, but nested acpi_set_WOL acquires a mutex inside atomic context. Ethtool operations are already serialized by RTNL mutex, so it is safe to drop the locks. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/main.c
2010-09-073c59x: Fix deadlock in vortex_error()Ben Hutchings
This fixes a bug introduced in commit de847272149365363a6043a963a6f42fb91566e2 "3c59x: Use fine-grained locks for MII and windowed register access". vortex_interrupt() holds vp->window_lock over multiple register accesses to reduce locking overhead. However it also needs to call vortex_error() sometimes, and that uses the regular functions for access to windowed registers, which will try to acquire window_lock again. Therefore, drop window_lock around the call to vortex_error() and set the window afterward reacquiring the lock. Since vortex_error() may call vortex_rx(), which *does* require its caller to hold window_lock, lift that call up into vortex_interrupt(). This also removes the potential for calling vortex_rx() on a later-generation NIC. Reported-and-tested-by: Jens Schüßler <jgs@trash.net> [in Debian's 2.6.32] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-013c59x: Remove incorrect locking; correct documented lock hierarchyBen Hutchings
vortex_ioctl() was grabbing vortex_private::lock around its call to generic_mii_ioctl(). This is no longer necessary since there are more specific locks which the mdio_{read,write}() functions will obtain. Worse, those functions do not save and restore IRQ flags when locking the MII state, so interrupts will be enabled when generic_mii_ioctl() returns. Since there is currently no need for any function to call mdio_{read,write}() while holding another spinlock, do not change them to save and restore IRQ flags but remove the specification of ordering between vortex_private::lock and vortex_private::mii_lock. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25drivers/net: Remove address use from assignments of function pointersJoe Perches
"foo = &function" is more commonly written "foo = function" Done with coccinelle script: // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> drivers/net/tehuti.c used a function and struct with the same name, the function was renamed. Compile tested x86 only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-243c59x: Fix deadlock between boomerang_interrupt and boomerang_start_txNeil Horman
If netconsole is in use, there is a possibility for deadlock in 3c59x between boomerang_interrupt and boomerang_start_xmit. Both routines take the vp->lock, and if netconsole is in use, a pr_* call from the boomerang_interrupt routine will result in the netconsole code attempting to trnasmit an skb, which can try to take the same spin lock, resulting in deadlock. The fix is pretty straightforward. This patch allocats a bit in the 3c59x private structure to indicate that its handling an interrupt. If we get into the transmit routine and that bit is set, we can be sure that we have recursed and will deadlock if we continue, so instead we just return NETDEV_TX_BUSY, so the stack requeues the skb to try again later. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-253c59x: Add ethtool WOL supportAndrew O. Shadoura
This patch adds wrappers for ethtool to get or set wake-on-LAN setting without re-inserting the kernel module. Signed-off-by: Andrew O. Shadoura <andrew@beldisplaytech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-233c59x: Fix call to mdio_sync() with the wrong argumentBen Hutchings
commit a095cfc40ec7ebe63e9532383c5b5c2a27b14075 "3c59x: Specify window explicitly for access to windowed registers" changed the first parameter to mdio_sync(), from a pointer to the register mapping, to a pointer to the vortex_private structure, and changed all but one of the call sites. Fix that last one. Reported-by: Luca Falavigna <dktrkranz@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23net: 3c59x: fix leak of iomapsKulikov Vasiliy
If vortex_probe1() fails we should unmap ioaddr mapped earlier. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-223c59x: handle pci_iomap() errorsKulikov Vasiliy
pci_iomap() can fail, handle this case and return -ENOMEM from probe function. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-293c59x: Use fine-grained locks for MII and windowed register accessBen Hutchings
This avoids scheduling in atomic context and also means that IRQs will only be deferred for relatively short periods of time. Previously discussed in: http://article.gmane.org/gmane.linux.network/155024 Reported-by: Arne Nordmark <nordmark@mech.kth.se> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-283c59x: Specify window explicitly for access to windowed registersBen Hutchings
Currently much of the code assumes that a specific window has been selected, while a few functions save and restore the window. This makes it impossible to introduce fine-grained locking. Make those assumptions explicit by introducing wrapper functions to set the window and read/write a register. Use these everywhere except vortex_interrupt(), vortex_start_xmit() and vortex_rx(). These set the window just once, or not at all in the case of vortex_rx() as it should always be called from vortex_interrupt(). Cache the current window in struct vortex_private to avoid unnecessary hardware writes. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Arne Nordmark <nordmark@mech.kth.se> [against 2.6.32] Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14drivers/net: Remove unnecessary returns from void function()sJoe Perches
This patch removes from drivers/net/ all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. It also does not remove null void functions with return. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' with some cleanups by hand. Compile tested x86 allmodconfig only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10net: trans_start cleanupsEric Dumazet
Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-14drivers: net: use skb_headlen()Eric Dumazet
replaces (skb->len - skb->data_len) occurrences by skb_headlen(skb) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-183c5xx: use netdev_mc_* helpersJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-03drivers/net: Move && and || to end of previous lineJoe Perches
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net: Use netdev_alloc_skb_ip_align()Eric Dumazet
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-303c59x: Rework suspend and resumeAnton Vorontsov
As noticed by Alan Stern, there is still one issue with the driver: we disable PCI IRQ on suspend, but other devices on the same IRQ line might still need the IRQ enabled to suspend properly. Nowadays, PCI core handles all power management work by itself, with one condition though: if we use dev_pm_ops. So, rework the driver to only quiesce 3c59x internal logic on suspend, while PCI core will manage PCI device power state with IRQs disabled. Suggested-by: Rafael J. Wysocki <rjw@sisk.pl> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-243c59x: Get rid of "Trying to free already-free IRQ"Anton Vorontsov
Following trace pops up if we try to suspend with 3c59x ethernet NIC brought down: root@b1:~# ifconfig eth16 down root@b1:~# echo mem > /sys/power/state ... 3c59x 0000:00:10.0: suspend 3c59x 0000:00:10.0: PME# disabled Trying to free already-free IRQ 48 ------------[ cut here ]------------ Badness at c00554e4 [verbose debug info unavailable] NIP: c00554e4 LR: c00554e4 CTR: c019a098 REGS: c7975c60 TRAP: 0700 Not tainted (2.6.31-rc4) MSR: 00021032 <ME,CE,IR,DR> CR: 28242422 XER: 20000000 TASK = c79cb0c0[1746] 'bash' THREAD: c7974000 ... NIP [c00554e4] __free_irq+0x108/0x1b0 LR [c00554e4] __free_irq+0x108/0x1b0 Call Trace: [c7975d10] [c00554e4] __free_irq+0x108/0x1b0 (unreliable) [c7975d30] [c005559c] free_irq+0x10/0x24 [c7975d40] [c01e21ec] vortex_suspend+0x70/0xc4 [c7975d60] [c017e584] pci_legacy_suspend+0x58/0x100 This is because the driver manages interrupts without checking for netif_running(). Though, there are few other issues with suspend/resume in this driver. The intention of calling free_irq() in suspend() was to avoid any possible spurious interrupts (see commit 5b039e681b8c5f30aac9cc04385 "3c59x PM fixes"). But, - On resume, the driver was requesting IRQ just after pci_set_master(), but before vortex_up() (which actually resets 3c59x chips). - Issuing free_irq() on a shared IRQ doesn't guarantee that a buggy HW won't trigger spurious interrupts in another driver that requested the same interrupt. So, if we want to protect from unexpected interrupts, then on suspend we should issue disable_irq(), not free_irq(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-013com: convert drivers to netdev_tx_tStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-08-05Add IDs for 3C905B-TX Fast Etherlink XL PCIPascal Terjan
We found this old card which was not supported, and physically looks similar to the other 3C905B we have (9055). After adding the IDs it seems to work fine (MII report, dhcp, scp, ...) Acked-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-033c59x: Fix build failure with gcc 3.2Jean Delvare
Fix the following build failure with gcc 3.2: CC [M] drivers/net/3c59x.o drivers/net/3c59x.c:2726:1: directives may not be used inside a macro argument drivers/net/3c59x.c:2725:59: unterminated argument list invoking macro "pr_err" drivers/net/3c59x.c: In function `dump_tx_ring': drivers/net/3c59x.c:2727: implicit declaration of function `pr_err' drivers/net/3c59x.c:2731: syntax error before ')' token Apparently gcc 3.2 doesn't like #if interleaved with a macro call. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13net: use symbolic values for ndo_start_xmit() return codesPatrick McHardy
Convert magic values 1 and -1 to NETDEV_TX_BUSY and NETDEV_TX_LOCKED respectively. 0 (NETDEV_TX_OK) is not changed to keep the noise down, except in very few cases where its in direct proximity to one of the other values. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-263c5xx: convert printk() to pr_<foo>()Alexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-263c59x: get rid of non-const printk warningsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-213c59x: convert to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-113c59x: Use device_set_wakeup_enableSteffen Klassert
Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set this bit by calling device_set_wakeup_enable(). This restores proper WOL for the 3c59x driver. Reported-and-tested-by: Graeme Wilford <gwilford@gmail.com> Reported-by: Gunnar Degnbol <degnbol@danbbs.dk> Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12netdevice: safe convert to netdev_priv() #part-1Wang Chen
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-16drivers/net: use nr_irqsYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-073c59x: use netdev_alloc_skbStephen Hemminger
Fix possible bug where end of receive buffer could be overwritten. The allocation needs to allow for the reserved space. This would only happen if device received packet greater than Ethernet standard MTU. Change this driver to use netdev_alloc_skb rather than setting skb->dev directly. For the initial allocation it doesn't need to be GFP_ATOMIC. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-213c59x: handle pci_name() being constGreg Kroah-Hartman
This changes vortex_prob1() to handle pci_name() now returning a constant string. Cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-27[netdrvr] 3c59x: remove irqs_disabled warning from local_bh_enableIngo Molnar
Original Author: Michael Buesch <mb@bu3sch.de> net, vortex: fix lockup Ingo Molnar reported: -tip testing found that Johannes Berg's "softirq: remove irqs_disabled warning from local_bh_enable" enhancement to lockdep triggers a new warning on an old testbox that uses 3c59x vortex and netlogging: -----> calling vortex_init+0x0/0xb0 PCI: Found IRQ 10 for device 0000:00:0b.0 PCI: Sharing IRQ 10 with 0000:00:0a.0 PCI: Sharing IRQ 10 with 0000:00:0b.1 3c59x: Donald Becker and others. 0000:00:0b.0: 3Com PCI 3c556 Laptop Tornado at e0800400. PCI: Enabling bus mastering for device 0000:00:0b.0 initcall vortex_init+0x0/0xb0 returned 0 after 47 msecs ... calling init_netconsole+0x0/0x1b0 netconsole: local port 4444 netconsole: local IP 10.0.1.9 netconsole: interface eth0 netconsole: remote port 4444 netconsole: remote IP 10.0.1.16 netconsole: remote ethernet address 00:19:xx:xx:xx:xx netconsole: device eth0 not up yet, forcing it eth0: setting half-duplex. eth0: setting full-duplex. ------------[ cut here ]------------ WARNING: at kernel/softirq.c:137 local_bh_enable_ip+0xd1/0xe0() Pid: 1, comm: swapper Not tainted 2.6.26-rc6-tip #2091 [<c0125ecf>] warn_on_slowpath+0x4f/0x70 [<c0126834>] ? release_console_sem+0x1b4/0x1d0 [<c0126d00>] ? vprintk+0x2a0/0x450 [<c012fde5>] ? __mod_timer+0xa5/0xc0 [<c046f7fd>] ? mdio_sync+0x3d/0x50 [<c0160ef6>] ? marker_probe_cb+0x46/0xa0 [<c0126ed7>] ? printk+0x27/0x50 [<c046f4c3>] ? vortex_set_duplex+0x43/0xc0 [<c046f521>] ? vortex_set_duplex+0xa1/0xc0 [<c0471b92>] ? vortex_timer+0xe2/0x3e0 [<c012b361>] local_bh_enable_ip+0xd1/0xe0 [<c08d9f9f>] _spin_unlock_bh+0x2f/0x40 [<c0471b92>] vortex_timer+0xe2/0x3e0 [<c014743b>] ? trace_hardirqs_on+0xb/0x10 [<c0147358>] ? trace_hardirqs_on_caller+0x88/0x160 [<c012f8b2>] run_timer_softirq+0x162/0x1c0 [<c0471ab0>] ? vortex_timer+0x0/0x3e0 [<c012b361>] local_bh_enable_ip+0xd1/0xe0 [<c08d9f9f>] _spin_unlock_bh+0x2f/0x40 [<c0471b92>] vortex_timer+0xe2/0x3e0 [<c014743b>] ? trace_hardirqs_on+0xb/0x10 [<c0147358>] ? trace_hardirqs_on_caller+0x88/0x160 [<c012f8b2>] run_timer_softirq+0x162/0x1c0 [<c0471ab0>] ? vortex_timer+0x0/0x3e0 [<c0471ab0>] ? vortex_timer+0x0/0x3e0 [<c012b60a>] __do_softirq+0x9a/0x160 [<c012b570>] ? __do_softirq+0x0/0x160 [<c0106775>] call_on_stack+0x15/0x30 [<c012b4f5>] ? irq_exit+0x55/0x60 [<c0106e85>] ? do_IRQ+0x85/0xd0 [<c0147391>] ? trace_hardirqs_on_caller+0xc1/0x160 [<c0104888>] ? common_interrupt+0x28/0x30 [<c08d8ac8>] ? mutex_unlock+0x8/0x10 [<c08d8180>] ? _cond_resched+0x10/0x30 [<c07a3be7>] ? netpoll_setup+0x117/0x390 [<c0cbfcfe>] ? init_netconsole+0x14e/0x1b0 [<c013d539>] ? ktime_get+0x19/0x40 [<c0c9bab2>] ? kernel_init+0x1b2/0x2c0 [<c0cbfbb0>] ? init_netconsole+0x0/0x1b0 [<c0396aa4>] ? trace_hardirqs_on_thunk+0xc/0x10 [<c0103f12>] ? restore_nocheck_notrace+0x0/0xe [<c0c9b900>] ? kernel_init+0x0/0x2c0 [<c0c9b900>] ? kernel_init+0x0/0x2c0 [<c0104aa7>] ? kernel_thread_helper+0x7/0x10 ======================= ---[ end trace 37f9c502aff112e0 ]--- console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x1b0 returned 0 after 2914 msecs looking at the driver I think the bug is real and the fix actually is trivial. vp->lock is also taken in hardware IRQ context, so we _have_ to always use irqsafe locking. As we run in a timer with IRQs disabled, we can simply use spin_lock. Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-063c59x: use netstats in net_device structurePaulius Zaleckas
Use net_device_stats from net_device structure instead of local. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-063c980-TX needs EXTRA_PREAMBLEGunnar Larisch
The ethernet card 3c980-TX needs a mdio_sync() to initialize the ethernet properly. This is forced by adding an EXTRA_PREAMBLE to its drv_flags. Without this, the driver did not reconnect after a link loss. Signed-off-by: Gunnar Larisch <Gunnar.Larisch@gmx.de> Acked-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-17vortex_up should initialize "err"Badari Pulavarty
Simple compile warning fix. (against 2.6.23-git12) Thanks, Badari vortex_up() should initialize 'err' for a successful return. drivers/net/3c59x.c: In function `vortex_up': drivers/net/3c59x.c:1494: warning: `err' might be used uninitialized in this function Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-16WOL bugfix for 3c59x.cSteffen Klassert
Some NICs (3c905B) can not generate PME in power state PCI_D0, while others like 3c905C can. Call pci_enable_wake() with PCI_D3hot should give proper WOL for 3c905B. Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Tested-by: Harry Coin <hcoin@n4comm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-103c59x: trivial endianness annotations, NULL noise removalAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>