summaryrefslogtreecommitdiffstats
path: root/drivers/net/benet/be_main.c
AgeCommit message (Collapse)Author
2011-03-30be2net: remove one useless lineSathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30be2net: cancel be_worker in be_shutdown() even when i/f is downSathya Perla
As the be_worker() workqueue is scheduled in be_probe() it must be canceled unconditionally in be_shutdown(). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30be2net: remove redundant code in be_worker()Sathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30be2net: parse vid and vtm fields of rx-compl only if vlanf bit is setSathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30be2net: refactor code that decides adapter->num_rx_queuesSathya Perla
The code has been refactored to not set num_rx_qs inside be_enable_msix(). num_rx_qs is now set at the time of queue creation based on the number of available msix vectors. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16be2net: Copyright notice change. Update to Emulex instead of ServerEnginesAjit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-15be2net: Fix UDP packet detected status in RX complPadmanabh Ratnakar
Status of UDP packet detection not getting populated in RX completion structure. This is required in csum_passed() routine. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14be2net: changes for BE3 native mode supportSathya Perla
So far be2net has been using BE3 in legacy mode. It now checks for native mode capability and if available it sets it. In native mode, the RX_COMPL structure is different from that in legacy mode. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Add multicast filter capability for LancerPadmanabh Ratnakar
Lancer requires multicast capability flag set during IFACE_CREATE for adding multicast filters. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Disarm CQ and EQ to disable interrupt in LancerPadmanabh Ratnakar
For Lancer disable interrupts in close by disarming CQs and EQs. Change the order of calls in be_close to achieve the correct result. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Remove TX Queue stop in closePadmanabh Ratnakar
Remove TX Queue stop in close Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Add error recovery during load for LancerPadmanabh Ratnakar
Add error recovery during load for Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Checksum field valid only for TCP/UDPPadmanabh Ratnakar
L4 checksum field is valid only for TCP/UDP packets in Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Remove ERR compl workaround for LancerPadmanabh Ratnakar
Workaround added for Lancer in handling RX ERR completion received when no RX buffers are posted is not needed. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03benet: use GFP_KERNEL allocations when possibleEric Dumazet
Extend be_alloc_pages() with a gfp parameter, so that we use GFP_KERNEL allocations instead of GFP_ATOMIC when not running in softirq context. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: use hba_port_num instead of port_numAjit Khaparde
Use hba_port_num for phy loopback and ethtool phy identification. From: Suresh R <suresh.reddy@emulex.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: fix to ignore transparent vlan ids wrongly indicated by NICAjit Khaparde
With transparent VLAN tagging, the ASIC wrongly indicates packets with VLAN ID. Strip them off in the driver. The VLAN Tag to be stripped will be given to the host as an async message. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: variable name changeAjit Khaparde
change occurances of stats_ioctl_sent to stats_cmd_sent Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: detect a UE even when a interface is down.Ajit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: gracefully handle situations when UE is detectedAjit Khaparde
Avoid accessing the hardware when UE is detected. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: fix be_suspend/resume/shutdownAjit Khaparde
> call pci msix disable in be_suspend > call pci msix enable in be_resume > stop worker thread in be_suspend > start worker thread in be_resume > stop worker thread in be_shutdown Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: pass proper hdr_size while flashing redboot.Ajit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: Allow VFs to call be_cmd_reset_function.Ajit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: pass domain numbers for pmac_add/del functionsAjit Khaparde
be_cmd_pmac_add/del functions need to pass domain number to the firmware. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: Cleanup the VF interface handlesAjit Khaparde
The PF needs to cleanup all the interface handles that it created for the VFs. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: call be_vf_eth_addr_config() after register_netdevAjit Khaparde
This is to avoid the completion processing for be_vf_eth_addr_config to consume the link status notification before netdev_register. Otherwise this causes the PF miss its first link status update. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: Initialize and cleanup sriov resources only if pci_enable_sriov has ↵Ajit Khaparde
succeeded. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: Use domain id when be_cmd_if_destroy is called.Ajit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: While configuring QOS for VF, pass proper domain idAjit Khaparde
While configuring QOS for VFs, the VF number should be translated to domain number correctly. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-02-03be2net: use device model DMA APIIvan Vecera
Use DMA API as PCI equivalents will be deprecated. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01be2net: remove netif_stop_queue being called before register_netdev.Ajit Khaparde
It is illegal to call netif_stop_queue before register_netdev. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01be2net: fix a crash seen during insmod/rmmod testAjit Khaparde
While running insmod/rmood in a loop, an unnecessary netif_stop_queue causes the system to crash. Remove the netif_stop_queue call and netif_start_queue in the link status update path. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21drivers/net/*/: Use static constJoe Perches
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. Signed-off-by: Joe Perches <joe@perches.com>
2010-12-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h drivers/net/wireless/iwlwifi/iwl-1000.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-core.h drivers/vhost/vhost.c
2010-12-16be2net: use mutex instead of spin lock for mbox_lockIvan Vecera
Since the mbox polling uses the schedule_timeout, the mbox_lock should be a mutex and not a spin lock. The commit f25b03a replaced udelay() with schedule_timeout() but didn't change mbox_lock to semaphore or mutex. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06be2net: Handle out of buffer completions for lancerSathya Perla
If Lancer chip does not have posted RX buffers, it posts an RX completion entry with the same frag_index as the last valid completion. The Error bit is also set. In BE, a flush completion is indicated with a zero value for num_rcvd in the completion. Such completions don't carry any data and are not processed. This patch refactors code to handle both cases with the same code. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06be2net: Fix be_dev_family_check() return value checkSathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06net: Fix too optimistic NETIF_F_HW_CSUM featuresMichał Mirosław
NETIF_F_HW_CSUM is a superset of NETIF_F_IP_CSUM+NETIF_F_IPV6_CSUM, but some drivers miss the difference. Fix this and also fix UFO dependency on checksumming offload as it makes the same mistake in assumptions. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-27be2net: adding support for Lancer family of CNAsSathya Perla
Key changes are: - EQ ids are not assigned consecutively in Lancer. So, fix mapping of MSIx vector to EQ-id. - BAR mapping and some req locations different for Lancer. - TCP,UDP,IP checksum fields must be compulsorily set in TX wrb for TSO in Lancer. - CEV_IST reg not present in Lancer; so, peek into event queue to check for new entries - cq_create and mcc_create cmd interface is different for Lancer; handle accordingly Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19be2net: Fix to avoid firmware update when interface is not open.Sarveshwar Bandi
Since interrupts are enabled only when open is called on the interface, Attempting a firmware update operation when interface is down could lead to partial success or failure of operation. This fix fails the request if netif_running is false. Signed-off-by: Sarveshwar Bandi <Sarveshwar.Bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27be2net: Schedule/Destroy worker thread in probe()/remove() rather than ↵Somnath Kotur
open()/close() When async mcc compls are rcvd on an i/f that is down (and so interrupts are disabled) they just lie unprocessed in the compl queue.The compl queue can eventually get filled up and cause the BE to lock up.The fix is to use be_worker to reap mcc compls when the i/f is down.be_worker is now launched in be_probe() and canceled in be_remove(). Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25be2net: Fix CSO for UDP packetsSomnath Kotur
We're setting skb->ip_summed to CHECKSUM_NONE for all non-TCP pkts, making the stack recompute checksum.This is a bug for UDP pkts for which cso must be used. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25be2net: Call netif_carier_off() after register_netdev()Somnath Kotur
Calling netif_carrier_off before register_netdev was causing the network interface to miss a linkwatch pending event leading to an inconsistent state if the link is not up when interface is initialized.This is now invoked after register_netdev. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24benet: make be_poll_rx localstephen hemminger
Only used in one file. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24benet: remove dead codestephen hemminger
The following code and data are defined but never used in current driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21be2net: Changes to use only priority codes allowed by f/wSomnath Kotur
Changes to use one of the priority codes allowed by CNA f/w for NIC traffic from host. The driver gets the bit map of the priority codes allowed for host traffic through a asynchronous message from the f/w that the driver subscribes to. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Don't check for vlan group before vlan_tx_tag_present.Jesse Gross
Many (but not all) drivers check to see whether there is a vlan group configured before using a tag stored in the skb. There's not much point in this check since it just throws away data that should only be present in the expected circumstances. However, it will soon be legal and expected to get a vlan tag when no vlan group is configured, so remove this check from all drivers to avoid dropping the tags. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.Jesse Gross
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-03be2net: add multiple RX queue supportSathya Perla
This patch adds multiple RX queue support to be2net. There are upto 4 extra rx-queues per port into which TCP/UDP traffic can be hashed into. Some of the ethtool stats are now displayed on a per queue basis. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>