summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x/bnx2x_link.c
AgeCommit message (Expand)Author
2011-05-05bnx2x: function descriptions format fixedDmitry Kravkov
2011-03-31Fix common misspellingsLucas De Marchi
2011-01-31bnx2x: Remove support for emulation/FPGAYaniv Rosner
2011-01-31bnx2x: Add CMS functionality for 848x3Yaniv Rosner
2011-01-31bnx2x: Add support for new PHY BCM84833Yaniv Rosner
2011-01-31bnx2x: Enhance SFP+ module controlYaniv Rosner
2011-01-31bnx2x: Add and change some net_dev messagesYaniv Rosner
2011-01-31bnx2x: Fix compilation warning messagesYaniv Rosner
2011-01-31bnx2x: Set comments according to preferred Linux styleYaniv Rosner
2011-01-31bnx2x: Rename CL45 macroYaniv Rosner
2011-01-31bnx2x: Fix line indentationYaniv Rosner
2011-01-30bnx2x: Fix port swap for BCM8073Yaniv Rosner
2011-01-30bnx2x: Fix LED blink rate on BCM84823Yaniv Rosner
2011-01-30bnx2x: Remove setting XAUI low-power for BCM8073Yaniv Rosner
2011-01-18bnx2x: Fix AER setting for BCM57712Yaniv Rosner
2011-01-18bnx2x: Fix BCM84823 LED behaviorYaniv Rosner
2011-01-18bnx2x: Mark full duplex on some external PHYsYaniv Rosner
2011-01-18bnx2x: Fix BCM8073/BCM8727 microcode loadingYaniv Rosner
2011-01-18bnx2x: LED fix for BCM8727 over BCM57712Yaniv Rosner
2011-01-18bnx2x: Common init will be executed only once after PORYaniv Rosner
2011-01-18bnx2x: Swap BCM8073 PHY polarity if requiredYaniv Rosner
2010-12-21bnx2x: remove bogus checkDan Carpenter
2010-12-16bnx2x: Add DCB/PFC support - link layerVladislav Zolotarov
2010-11-15drivers/net/bnx2x: Remove unnecessary semicolonsJoe Perches
2010-11-01bnx2x: Reset 8073 phy during common initYaniv Rosner
2010-11-01bnx2x: Do not enable CL37 BAM unless it is explicitly enabledYaniv Rosner
2010-11-01bnx2x: Fix resetting BCM8726 PHY during common initYaniv Rosner
2010-11-01bnx2x: Clear latch indication on link resetYaniv Rosner
2010-11-01bnx2x: Fix port selection in case of E2Yaniv Rosner
2010-11-01bnx2x: Fix waiting for reset complete on BCM848x3 PHYsYaniv Rosner
2010-11-01bnx2x: Restore appropriate delay during BMAC resetYaniv Rosner
2010-10-24bnx2x: make local function static and remove dead codestephen hemminger
2010-10-06bnx2x: Add 57712 supportDmitry Kravkov
2010-10-06bnx2x, cnic, bnx2i: use new FW/HSIDmitry Kravkov
2010-09-07bnx2x: Change LED scheme for dual-mediaYaniv Rosner
2010-09-07bnx2x: Add dual-media changesYaniv Rosner
2010-09-07bnx2x: Organize PHY functionsYaniv Rosner
2010-09-07bnx2x: Apply logic changes for the new schemeYaniv Rosner
2010-09-07bnx2x: Move common function into aggregated functionYaniv Rosner
2010-09-07bnx2x: Adjust flow-control with the new schemeYaniv Rosner
2010-09-07bnx2x: Adjust alignment of split PHY functionsYaniv Rosner
2010-09-07bnx2x: Split PHY functionsYaniv Rosner
2010-09-07bnx2x: Unify PHY attributesYaniv Rosner
2010-09-01bnx2x: Change BCM848xx LED configurationYaniv Rosner
2010-09-01bnx2x: Remove unneeded setting of XAUI low power to BCM8727Yaniv Rosner
2010-09-01bnx2x: Change BCM848xx configuration according to IEEEYaniv Rosner
2010-09-01bnx2x: Fix potential link issue In BCM8727 based boardsYaniv Rosner
2010-09-01bnx2x: Fix potential link issue of BCM8073/BCM8727Yaniv Rosner
2010-08-16drivers/net/bnx2x: Adjust confusing if indentationJulia Lawall
2010-07-27bnx2x: Create separate folder for bnx2x driverDmitry Kravkov
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-15 06:36:11 +0000