summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x/bnx2x_link.c
AgeCommit message (Expand)Author
2011-07-05bnx2x: Fix warning message during 57712/8727 initializationYaniv Rosner
2011-07-05bnx2x: Add autogrEEEn supportYaniv Rosner
2011-07-05bnx2x: Fix BCM84833 initializationYaniv Rosner
2011-07-05bnx2x: Fix false link indication at link partner when DAC is usedYaniv Rosner
2011-07-05bnx2x: Reset PHY due to fan failure for 578xxYaniv Rosner
2011-07-05bnx2x: Add CL37 BAM for WarpcoreYaniv Rosner
2011-07-05bnx2x: Change BCM54616S to BCM54618SEYaniv Rosner
2011-07-05bnx2x: PFC fixesYaniv Rosner
2011-06-15bnx2x: Rename LASI registers to definitions in mdio.hYaniv Rosner
2011-06-15bnx2x: Add a periodic task for link PHY eventsYaniv Rosner
2011-06-15bnx2x: Adjust BCM84833 to BCM578xxYaniv Rosner
2011-06-15bnx2x: Adjust ETS to 578xxYaniv Rosner
2011-06-15bnx2x: Add new PHY 54616sYaniv Rosner
2011-06-15bnx2x: Add Warpcore support for 578xxYaniv Rosner
2011-06-15bnx2x: Add new MAC support for 578xxYaniv Rosner
2011-06-15New 7.0 FW: bnx2x, cnic, bnx2i, bnx2fcVlad Zolotarov
2011-06-01bnx2x: Improve cl45 access methodsYaniv Rosner
2011-06-01bnx2x: Modify XGXS functionsYaniv Rosner
2011-06-01bnx2x: Fix link status syncYaniv Rosner
2011-06-01bnx2x: Adjust BCM8726 module detection settingsYaniv Rosner
2011-06-01bnx2x: Fix grammar and relocate codeYaniv Rosner
2011-06-01bnx2x: Fix BCM84833 settingsYaniv Rosner
2011-06-01bnx2x: Fix over current port displayYaniv Rosner
2011-06-01bnx2x: Add TX fault check for fiber PHYsYaniv Rosner
2011-06-01bnx2x: Change return status typeYaniv Rosner
2011-06-01bnx2x: Fix port type displayYaniv Rosner
2011-06-01bnx2x: Add new phy BCM8722Yaniv Rosner
2011-05-05bnx2x: function descriptions format fixedDmitry Kravkov
2011-03-31Fix common misspellingsLucas De Marchi
2011-01-31bnx2x: Remove support for emulation/FPGAYaniv Rosner
2011-01-31bnx2x: Add CMS functionality for 848x3Yaniv Rosner
2011-01-31bnx2x: Add support for new PHY BCM84833Yaniv Rosner
2011-01-31bnx2x: Enhance SFP+ module controlYaniv Rosner
2011-01-31bnx2x: Add and change some net_dev messagesYaniv Rosner
2011-01-31bnx2x: Fix compilation warning messagesYaniv Rosner
2011-01-31bnx2x: Set comments according to preferred Linux styleYaniv Rosner
2011-01-31bnx2x: Rename CL45 macroYaniv Rosner
2011-01-31bnx2x: Fix line indentationYaniv Rosner
2011-01-30bnx2x: Fix port swap for BCM8073Yaniv Rosner
2011-01-30bnx2x: Fix LED blink rate on BCM84823Yaniv Rosner
2011-01-30bnx2x: Remove setting XAUI low-power for BCM8073Yaniv Rosner
2011-01-18bnx2x: Fix AER setting for BCM57712Yaniv Rosner
2011-01-18bnx2x: Fix BCM84823 LED behaviorYaniv Rosner
2011-01-18bnx2x: Mark full duplex on some external PHYsYaniv Rosner
2011-01-18bnx2x: Fix BCM8073/BCM8727 microcode loadingYaniv Rosner
2011-01-18bnx2x: LED fix for BCM8727 over BCM57712Yaniv Rosner
2011-01-18bnx2x: Common init will be executed only once after PORYaniv Rosner
2011-01-18bnx2x: Swap BCM8073 PHY polarity if requiredYaniv Rosner
2010-12-21bnx2x: remove bogus checkDan Carpenter
2010-12-16bnx2x: Add DCB/PFC support - link layerVladislav Zolotarov
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-26 02:10:33 +0000