summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x
AgeCommit message (Collapse)Author
2011-09-15bnx2x: Fix ethtool advertisementYaniv Rosner
Enable changing advertisement settings via ethtool. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: Fix 578xx link LEDYaniv Rosner
Fix 1G link LED for the BCM578xx-SFI/KR. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: Fix XMAC loopback testYaniv Rosner
Change XMAC loopback type from CORE LOCAL to LINE LOCAL for the BCM578xx due to intermittent problem with the loopback with this configuration. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: Remove fiber remote fault detectionYaniv Rosner
Remove remote fault detection as a tactic retreat due to link issues involved with it. Once issue is resolved, this feature will be restored again. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: Enable FEC for 57810-KRYaniv Rosner
Enable FEC(Forward Error Correction) for 57810-KR to reduce link errors. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: Fix ETS bandwidthYaniv Rosner
ETS bandwidth of 0% is not allowed by driver, so provide alternative HW configuration for this case. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: Fix for a host coalescing bug which impared latency.Ariel Elior
Seperated Rx and Tx coalescing to different state machines. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: don't access removed registers on 57712 and aboveDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: init fw_seq after undi_unload is doneDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: don't reset device while reading its configuration.Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: fix MF for 4-port devicesDmitry Kravkov
Number of VNs for 4-port devices is 2 instead of 4 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: fix rx ring size reportVladislav Zolotarov
Store the size in bp, read from bp when queried. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: decrease print level to debugDmitry Kravkov
It may happen every link toggle. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bnx2x: fix BRB thresholds for dropless_fc modeDmitry Kravkov
Fix the thresholds according to 5778x HW and increase rx_ring size to suit new thresholds in dropless_fc mode. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: disable dcb on 578xx since not supported yetDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: properly clean indirect addressesDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: prevent race between undi_unload and load flowsDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: fix select_queue when FCoE is disabledVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bnx2x: init FCOE FP only onceVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Clear MDIO access warning during first driver loadYaniv Rosner
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM578xx MAC testYaniv Rosner
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM54618se invalid link indicationYaniv Rosner
After resetting BCM54618se, link partner would still see link since the PHY wasn't put into low-power state. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM84833 linkYaniv Rosner
BCM84833 fail to link due to incorrect auto-negotiation setting. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix link issue with DAC over 578xxYaniv Rosner
Fix no-link issue on BCM578xx when direct attached cable is connected since Warpcore microcode restart was missing to re-read the new mode. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix LED behaviorYaniv Rosner
This fix resolve two problems seen regarding LED: 1. LED doesn't flash during port identification. 2. Traffic LED sometimes do not blink. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM578xx-B0 MDIO accessYaniv Rosner
Fix MDIO access to Warpcore on new chip version of 578xx. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix remote fault handlingYaniv Rosner
Fix couple of issues of remote fault detection and handling: Link may go down due to remote fault indications during link establishment. Possible link down after primary function migration. Remote fault was not detected on 578xx. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix chip hanging due to TX pipe stall.Yaniv Rosner
Fix a problem in which the 578xx chip hangs after running traffic, and then pulling the network cable. This occurs since TX pipe is stalled due to missing XON indication towards the NIG. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix missing pause on for 578xxYaniv Rosner
When link speed is 1G and below, pause weren't sent due to missing pause setting in the UMAC. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-02bnx2x: Prevent restarting Tx during bnx2x_nic_unloadVladislav Zolotarov
Tx queues were stopped before bp->state was changed to a value different from BNX2X_STATE_OPEN, which allowed the bnx2x_tx_int() called from the NAPI context to re-enable it. This then allowed the netdev->ndo_start_xmit() to be called in the middle of the function reset and rings freeing. This patch changes bp->state to a value different from BNX2X_STATE_OPEN BEFORE disabling the Tx queues in order to restore the broken protection against the above race in the bnx2x_tx_int(). Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: use pci_pcie_cap()Vladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: fix bnx2x_stop_on_error flow in bnx2x_sp_rtnl_taskVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: enable internal target-read for 57712 and up onlyShmulik Ravid
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: count statistic ramrods on EQ to prevent MC assertVladislav Zolotarov
This patch includes: - Counting statistics ramrods as EQ ramrods the way they should be. This accounting is meant to prevent MC asserts in case of software bugs. - Fixes in debug facilities which were added while working on one of such bugs. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: fix loopback for non 10G linkYaniv Rosner
Also fixes minor formatting in that function. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: dcb - send all unmapped priorities to same COS as L2Dmitry Kravkov
As a result of DCBX negotiation some priorities maybe untouched and still unmapped to any COS; instead of sending them to COS0 we assign them to the same COS as L2 traffic - to avoid collisions with storage class of service. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21bnx2x: Broken self-test in SF mode on 578xxVladislav Zolotarov
This patch fixes both the failure in the self-test on 578xx and a hole in a parity recovery flow that this failure has discovered: - internal 'pending' state in a VLAN_MAC object wasn't been cleared when the object state change was called with DRV_ONLY flag, which in particular happens when a parity error happens during the self-test. - bp->sp_state wasn't cleared in the similar circumstances as described above. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21bnx2x: Parity errors recovery for 578xxVladislav Zolotarov
Fix the parity errors recovery flow for 578xx: - Add a separate column for the 578xx in the parity mask registers DB. - Fix the bnx2x_process_kill_chip_reset() to handle the blocks newly introduced in the 578xx. Cover ATC and PGLUE_B blocks for 57712 and 578xx. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21bnx2x: Read FIP mac from SHMEM in single function modeVladislav Zolotarov
Read FIP MAC address from SHMEM's "port" section similar to what we do in a MF mode when we read it from a "func" section of SHMEM. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21bnx2x: Fixed ethtool -d for 578xxVladislav Zolotarov
Registers dump code erroneously treated 578xx as 57712. This patch fixes the above and also removes unused data structures. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21bnx2x: Implementation for netdev->ndo_fcoe_get_wwnVladislav Zolotarov
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: disable FCoE for 578xx devices since not yet supportedDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: fix memory barriersVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: use BNX2X_Q_FLG_TPA_IPV6 for TPA queue configurationVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: disable loacal BH when scheduling FCOE napiVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: fix MB index for 4-port devicesDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: DCB reworkDmitry Kravkov
create DCB related states in function state-machine allow handling of DCB errors from FW allow disablement of DCB in FW, when peer disappears or error clean up unused functions/variables as pointed by David Binderman <dcb314@hotmail.com> Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: remove unnecessary dma_syncVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: stop tx before CNIC_STOPVladislav Zolotarov
It may take some time to cnic to respond, this prevents tx_timeout when it happens. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: add missing command in error handling flowDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 21:36:05 +0000