summaryrefslogtreecommitdiffstats
path: root/drivers/net/can
AgeCommit message (Collapse)Author
2012-02-20can: sja1000: fix isr hang when hw is unplugged under loadOliver Hartkopp
In the case of hotplug enabled devices (PCMCIA/PCIeC) the removal of the hardware can cause an infinite loop in the common sja1000 isr. Use the already retrieved status register to indicate a possible hardware removal and double check by reading the mode register in sja1000_is_absent. Cc: stable@kernel.org [3.2+] Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: peak_pci: Fix the way channels are linked togetherStephane Grosjean
Change the way channels objects are linked together by peak_pci_probe() avoiding any kernel oops when driver is removed. Side effect is that the list is now browsed from last to first channel. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: ems_usb: Removed double netif_device_detachSebastian Haas
netif_device_attched is called twice when ems_usb_start fails with -ENODEV Signed-off-by: Sebastian Haas <dev@sebastianhaas.info> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: pch_can: fix error passive level testXi Wang
The test (((errc & PCH_REC) >> 8) > 127) would always be false because the receive error counter ((errc & PCH_REC) >> 8) is at most 127, where PCH_REC is defined as 0x7f00. To test whether the receive error counter has reached the error passive level, the RP bit (15) should be used. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: ti_hecc: use netif_rx in the interruptWolfgang Grandegger
This patch fixes locking problems by using netif_rx() instead of netif_receive_skb() in ti_hecc_error() called from the interrupt context. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: cc770: Fix indirect access deadlock on ISA cardsWolfgang Zarre
This fix avoids a deadlock if an interrupt occurs during consecutive port operations on ISA cards utilising indirect access via address and data port. Tested on a B&R ISA card. Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Wolfgang Zarre <lkdev@essax.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: cc770: store echo skb before starting the transferWolfgang Grandegger
On slow systems and high CAN bitrates, the error message "can_put_echo_skb: BUG! echo_skb is occupied!" did show up because can_put_echo_skb() was called after starting the transfer. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: flexcan: fix irq flooding by clearing all interrupt sourcesWolfgang Grandegger
As pointed out by Reuben Dowle and Lothar Waßmann, the TWRN_INT, RWRN_INT, BOFF_INT interrupt sources need to be cleared as well to avoid interrupt flooding, at least for the Flexcan on i.MX28 SOCs. Furthermore, the interrupts are only cleared, if really one of those interrupt sources are pending (which is not the case for rx and tx done). Cc: Reuben Dowle <Reuben.Dowle@navico.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-01-09Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
clock management changes for i.MX Another simple series related to clock management, this time only for imx. * tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: select HAVE_CLK_PREPARE for clock clk: add config option HAVE_CLK_PREPARE into Kconfig ASoC: mxs-saif: convert to clk_prepare/clk_unprepare video: mxsfb: convert to clk_prepare/clk_unprepare serial: mxs-auart: convert to clk_prepare/clk_unprepare net: flexcan: convert to clk_prepare/clk_unprepare mtd: gpmi-lib: convert to clk_prepare/clk_unprepare mmc: mxs-mmc: convert to clk_prepare/clk_unprepare dma: mxs-dma: convert to clk_prepare/clk_unprepare net: fec: add clk_prepare/clk_unprepare ARM: mxs: convert platform code to clk_prepare/clk_unprepare clk: add helper functions clk_prepare_enable and clk_disable_unprepare Fix up trivial conflicts in drivers/net/ethernet/freescale/fec.c due to commit 0ebafefcaa7a ("net: fec: add clk_prepare/clk_unprepare") clashing trivially with commit e163cc97f9ac ("net/fec: fix the .remove code").
2012-01-07Merge branch 'driver-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-28net: flexcan: convert to clk_prepare/clk_unprepareShawn Guo
The patch converts flexcan driver to clk_prepare/clk_unprepare by using helper functions clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: David S. Miller <davem@davemloft.net>
2011-12-19module_param: make bool parameters really bool (net & drivers/net)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. (Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false). Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01can: cc770: add platform bus driver for the CC770 and AN82527Wolfgang Grandegger
This driver works with both, static platform data and device tree bindings. It has been tested on a TQM855L board with two AN82527 CAN controllers on the local bus. CC: Devicetree-discuss@lists.ozlabs.org CC: linuxppc-dev@ozlabs.org CC: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01can: cc770: add legacy ISA bus driver for the CC770 and AN82527Wolfgang Grandegger
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN controllers on the ISA or PC-104 bus. The I/O port or memory address and the IRQ number must be specified via module parameters: insmod cc770_isa.ko port=0x310,0x380 irq=7,11 for ISA devices using I/O ports or: insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 for memory mapped ISA devices. Indirect access via address and data port is supported as well: insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11 Furthermore, the following mode parameter can be defined: clk: External oscillator clock frequency (default=16000000 [16 MHz]) cir: CPU interface register (default=0x40 [DSC]) bcr: Bus configuration register (default=0x40 [CBY]) cor: Clockout register (default=0x00) Note: for clk, cir, bcr and cor, the first argument re-defines the default for all other devices, e.g.: insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000 is equivalent to insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01can: cc770: add driver core for the Bosch CC770 and Intel AN82527Wolfgang Grandegger
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30can: Revert outdated cc770 driver patches.David S. Miller
Newer versions have been floating about, and I applied to older variant unfortunately. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29can: cc770: legacy CC770 ISA bus driverWolfgang Grandegger
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN controllers on the ISA or PC-104 bus. The I/O port or memory address and the IRQ number must be specified via module parameters: insmod cc770_isa.ko port=0x310,0x380 irq=7,11 for ISA devices using I/O ports or: insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 for memory mapped ISA devices. Indirect access via address and data port is supported as well: insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11 Furthermore, the following mode parameter can be defined: clk: External oscillator clock frequency (default=16000000 [16 MHz]) cir: CPU interface register (default=0x40 [CPU_DSC]) ocr, Bus configuration register (default=0x00) cor, Clockout register (default=0x00) Note: for clk, cir, bcr and cor, the first argument re-defines the default for all other devices, e.g.: insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000 is equivalent to insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29can: cc770: add driver core for the Bosch CC770 and Intel AN82527Wolfgang Grandegger
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29can: sja1000_isa: convert to platform driver to support x86_64 systemsWolfgang Grandegger
This driver is currently not supported on x86_64 systems because the "isa_driver" interface is used (CONFIG_ISA=y). To overcome this limitation, the driver is converted to a platform driver, similar to the serial 8250 driver. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29can: sja1000_isa: fix "limited range" compiler warningsWolfgang Grandegger
This patch fixes the compiler warnings: "comparison is always false due to limited range of data type" by using "0xff" instead of "-1" for unsigned values. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net/can: convert drivers/net/can/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/net/can/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Anatolij Gustschin <agust@denx.de> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Kurt Van Dijck <kurt.van.dijck@eia.be> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/inet_diag.c
2011-11-21net, sja1000: Don't include version.h in peak_pci.c when not neededJesper Juhl
It was pointed out by "make versioncheck" that we do not need to include version.h in drivers/net/can/sja1000/peak_pci.c This patch removes the unneeded include. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18USB: convert drivers/net/* to use module_usb_driver()Greg Kroah-Hartman
This converts the drivers in drivers/net/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Oliver Neukum <oliver@neukum.name> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Petko Manolov <petkan@users.sourceforge.net> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Herton Ronaldo Krzesinski <herton@canonical.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: "David S. Miller" <davem@davemloft.net> Cc: Roel Kluin <roel.kluin@gmail.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Pavel Roskin <proski@gnu.org> Cc: Yoann DI-RUZZA <y.diruzza@lim.eu> Cc: George <george0505@realtek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-16net: remove NETIF_F_NO_CSUM feature bitMichał Mirosław
Only distinct use is checking if NETIF_F_NOCACHE_COPY should be enabled by default. The check heuristics is altered a bit here, so it hits other people than before. The default shouldn't be trusted for performance-critical cases anyway. For all other uses NETIF_F_NO_CSUM is equivalent to NETIF_F_HW_CSUM. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net/can/mscan: Fix buggy listen only mode settingWolfgang Grandegger
This patch fixes an issue introduced recently with commit 452448f9283e1939408b397e87974a418825b0a8. CC: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net/can/mscan: add listen only modeMarc Kleine-Budde
This patch adds listen only mode to the mscan controller. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits) dp83640: free packet queues on remove dp83640: use proper function to free transmit time stamping packets ipv6: Do not use routes from locally generated RAs |PATCH net-next] tg3: add tx_dropped counter be2net: don't create multiple RX/TX rings in multi channel mode be2net: don't create multiple TXQs in BE2 be2net: refactor VF setup/teardown code into be_vf_setup/clear() be2net: add vlan/rx-mode/flow-control config to be_setup() net_sched: cls_flow: use skb_header_pointer() ipv4: avoid useless call of the function check_peer_pmtu TCP: remove TCP_DEBUG net: Fix driver name for mdio-gpio.c ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces ipv4: fix ipsec forward performance regression jme: fix irq storm after suspend/resume route: fix ICMP redirect validation net: hold sock reference while processing tx timestamps tcp: md5: add more const attributes Add ethtool -g support to virtio_net ... Fix up conflicts in: - drivers/net/Kconfig: The split-up generated a trivial conflict with removal of a stale reference to Documentation/networking/net-modules.txt. Remove it from the new location instead. - fs/sysfs/dir.c: Fairly nasty conflicts with the sysfs rb-tree usage, conflicting with Eric Biederman's changes for tagged directories.
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
2011-10-24Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-10-17can: remove references to berlios mailinglistMarc Kleine-Budde
The BerliOS project, which currently hosts our mailinglist, will close with the end of the year. Now take the chance and remove all occurrences of the mailinglist address from the source files. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10mscan: too much data copied to CAN frame due to 16 bit accessesWolfgang Grandegger
Due to the 16 bit access to mscan registers there's too much data copied to the zero initialized CAN frame when having an odd number of bytes to copy. This patch ensures that only the requested bytes are copied by using an 8 bit access for the remaining byte. Reported-by: Andre Naujoks <nautsch@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28candev: allow SJW user setting for bittiming calculationOliver Hartkopp
This patch adds support for SJW user settings to not set the synchronization jump width (SJW) to 1 in any case when using the in-kernel bittiming calculation. The ip-tool from iproute2 already supports to pass the user defined SJW value. The given SJW value is sanitized with the controller specific sjw_max and the calculated tseg2 value. As the SJW can have values up to 4 providing this value will lead to the maximum possible SJW automatically. A higher SJW allows higher controller oscillator tolerances. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28can/sja1000: add driver for EMS PCMCIA cardOliver Hartkopp
This patch adds the driver for the SJA1000 based PCMCIA card 'CPC-Card' from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Markus Plessing <plessing@ems-wuensche.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-27doc: fix broken referencesPaul Bolle
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-22Merge branch 'master' of github.com:davem330/netDavid S. Miller
Conflicts: MAINTAINERS drivers/net/Kconfig drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c drivers/net/ethernet/broadcom/tg3.c drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-21can/sja1000: driver for PEAK PCAN PCI/PCIe cardsWolfgang Grandegger
This patch add the peak_pci driver for the PCAN PCI/PCIe cards (1, 2, 3 or 4 channels) from PEAK Systems (http://www.peak-system.com). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16can: ti_hecc: include linux/io.hDaniel Mack
This fixes a build breakage for OMAP3 boards. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: netdev@vger.kernel.org Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-26can: ti_hecc: Fix uninitialized spinlock in probeAbhilash K V
In ti_hecc_probe(), the spinlock priv->mbx_lock is not inited, causing a spinlock lockup BUG. Acked-by: Anant Gole <anantgole@ti.com> Signed-off-by: Abhilash K V <abhilash.kv@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-26can: ti_hecc: Fix unintialized variableAbhilash K V
In ti_hecc_xmit(), local variable "data" is not initialized before being used. This initialization got inadvertently removed in the following patch: can: Unify droping of invalid tx skbs and netdev stats Acked-by: Anant Gole <anantgole@ti.com> Signed-off-by: Abhilash K V <abhilash.kv@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-08-17flexcan: Prefer device tree clock frequency if available.holt@sgi.com
If our CAN device's device tree node has a clock-frequency property, then use that value for the can devices clock frequency. If not, fall back to asking the platform/mach code for the clock frequency associated with the flexcan device. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com>, Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Marc Kleine-Budde <mkl@pengutronix.de>, Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: socketcan-core@lists.berlios.de, Cc: netdev@vger.kernel.org, Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Add of_match to platform_device definition.holt@sgi.com
On powerpc, the OpenFirmware devices are not matched without specifying an of_match array. Introduce that array as that is used for matching on the Freescale P1010 processor. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Abstract off read/write for big/little endian.holt@sgi.com
Make flexcan driver handle register reads in the appropriate endianess. This was a basic search and replace and then define some inlines. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Remove #include <mach/clock.h>holt@sgi.com
powerpc does not have a mach-####/clock.h. When testing, I found neither arm nor powerpc needed the mach/clock.h at all so I removed it. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-15net/can/mscan: add __iomem annotationsMarc Kleine-Budde
This patch fixes the following sparse warning by adding the missing __iomem annotation. drivers/net/can/mscan/mscan.c:73:32: warning: incorrect type in argument 1 (different address spaces) drivers/net/can/mscan/mscan.c:73:32: expected unsigned char volatile [noderef] [usertype] <asn:2>*addr drivers/net/can/mscan/mscan.c:73:32: got unsigned char *<noident> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-08-13drivers/net/can/sja1000/plx_pci.c: eliminate double freeJulia Lawall
In this code, the failure_cleanup label calls the function plx_pci_del_card, which frees everything in the card->net_dev array. dev is placed in this array immediately after allocation, so the two subsequent jumps to failure_cleanup should not also call free_sja1000dev, but the second one does. If plx_pci_check_sja1000 fails, then free_sja1000dev is also called on dev. Because dev is already in the card->net_dev array, this implies that when plx_pci_del_card is later called, it may get freed again. So that entry is reset to NULL after the free. Finally, if there is a problem with one channel, there will be a hole in the array. card->channels counts the number of channels that have succeeded, and does not keep track of the index of the largest element in the array that is valid. So the loop in plx_pci_del_card is changed to go up to PLX_PCI_MAX_CHAN, which is only 2. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11slcan: ldisc generated skbs are received in softirq contextOliver Hartkopp
As this discussion pointed out http://marc.info/?l=linux-netdev&m=131257225602375 netdevices that are based on serial line disciplines should use netif_rx_ni() when pushing received socketbuffers into the netdev rx queue. Following commit 614851601c121b1320a35757ab88292d6272f906 ("slip: fix NOHZ local_softirq_pending 08 warning") this patch updates the slcan driver accordingly. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> CC: Matvejchikov Ilya <matvejchikov@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)