summaryrefslogtreecommitdiffstats
path: root/drivers/net/can
AgeCommit message (Collapse)Author
2011-01-31CAN: softing driver depends on IOMEMChuck Ebbert
Without this dependency the softing driver will be buildable on s390, where it fails. Signed-Off-By: Chuck Ebbert <cebbert@redhat.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30slcan: fix referenced website in Kconfig help textOliver Hartkopp
Fix the referenced project website to www.mictronics.de in the Kconfig help text for the slcan driver. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24Merge branch 'can/at91_can-for-net-2.6' of ↵David S. Miller
git://git.pengutronix.de/git/mkl/linux-2.6
2011-01-24can: at91_can: make can_id of mailbox 0 configurableMarc Kleine-Budde
Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with an unused identifier. This patch implements the second part of the workaround. A sysfs entry "mb0_id" is introduced. While the interface is down it can be used to configure the can_id of mailbox 0. The default value id 0x7ff. In order to use an extended can_id add the CAN_EFF_FLAG (0x80000000U) to the can_id. Example: - standard id 0x7ff: echo 0x7ff > /sys/class/net/can0/mb0_id - extended id 0x1fffffff: echo 0x9fffffff > /sys/class/net/can0/mb0_id Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> For the Documentation-part: Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-01-24can: at91_can: don't use mailbox 0Marc Kleine-Budde
Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with a unused identifier. This patch implements the first part of the workaround, it updates AT91_MB_RX_NUM and AT91_MB_RX_FIRST (and the inline documentation) so that mailbox 0 stays unused. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
2011-01-24can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUMMarc Kleine-Budde
This patch cleans up the usage of two macros which specify the mailbox usage. AT91_MB_RX_FIRST and AT91_MB_RX_NUM define the first and the number of RX mailboxes. The current driver uses these variables in an unclean way; assuming that AT91_MB_RX_FIRST is 0; This patch cleans up the usage of these macros, no longer assuming AT91_MB_RX_FIRST == 0. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2011-01-21can: add driver for Softing cardKurt Van Dijck
This patch adds the driver that creates a platform:softing device from a pcmcia_device Note: the Kconfig indicates a dependency on the softing.ko driver, but this is purely to make configuration intuitive. This driver will work independent, but no CAN network devices appear until softing.ko is loaded too. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-21can: add driver for Softing cardKurt Van Dijck
This patch adds a driver for the platform:softing device. This will create (up to) 2 CAN network devices from 1 platform:softing device Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-22pch_can: Fix array miss-pointing issueTomoya
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21drivers/net/*/: Use static constJoe Perches
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. Signed-off-by: Joe Perches <joe@perches.com>
2010-12-13pch_can: Replace netif_rx to netif_receive_skbTomoya
Since this driver is implemented as NAPI, netif_receive_skb must be used not netif_rx. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Add setting TEC/REC statistics processingTomoya
Add setting TEC/REC statistics processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Optimize "if" condition in rx/tx processingTomoya
For reduce "if" condition, easy to read/understand the code, optimize "if" condition in rx/tx processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix incorrect return processingTomoya
Fix incorrect return processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Move MSI processing to probe/remove processingTomoya
Currently, in case this driver is integrated as module, and when this module is re-installed, no interrupts is to be occurred. For the above issue, move MSI processing to open/release processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Comment optimizationTomoya
Comment optimization Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix miss-setting status issueTomoya
Modify miss-setting status issue at suspend. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix bit timing calculation issueTomoya
Modify like use calculated value directly passed by CAN core module. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Delete unnecessary/redundant codeTomoya
Delete unnecessary/redundant code Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix coding rule violationTomoya
Fix coding rule violation. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Replace netdev_dbg instead of dev_dbg partlyTomoya
For easy to readable, use netdev_dbg instead of dev_dbg partly Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Change Copyright and module descriptionTomoya
Currently, Copyright and module description are not formal. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Reduce register accessTomoya
For improve tx/rx speed, reduce register access. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Change functions typeTomoya
Currently, these two functions spec(returned value) is unnatural. Thus, change the return value's spec Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Rename function/macro nameTomoya
For easy to read/understand, Rename function/macro name. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix warningsTomoya
Currently, in case CONFIG_PM is disabled, compiler outputs warnings. Move six functions which are used only CONFIG_PM is enabled, into "#ifdef CONFIG_PM" area. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Improve rx processingTomoya
Replace complex "goto" to "do~while". For easy to read/understand, it divides a rx function into some functions. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Fix endianness issueTomoya
there is endianness issue both Tx and Rx. Currently, data is set like below. Register: MSB--LSB x x D0 D1 x x D2 D3 x x D4 D5 x x D6 D7 But Data to be sent must be set like below. Register: MSB--LSB x x D1 D0 x x D3 D2 x x D5 D4 x x D7 D6 (x means reserved area.) Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Divide poll functionTomoya
To easy to read/understand, divide poll function into two sub-functions. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13pch_can: Add flow control processingTomoya
Currently, there is no flow control processing. Thus, Add flow control processing as when there is no empty of tx buffer, netif_stop_queue is called. When there is empty buffer, netif_wake_queue is called. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-12drivers/net: remove unnecessary flush_scheduled_work() callsTejun Heo
janz-ican3, sh_eth, skge and vxge don't use workqueue at all and there is no reason to flush the system_wq. Drop flush_scheduled_work() calls and references to workqueue. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Sivakumar Subramani <sivakumar.subramani@exar.com> Cc: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Cc: Jon Mason <jon.mason@exar.com> Cc: netdev@vger.kernel.org
2010-12-08can: slcan: Add missing linux/sched.h include.David S. Miller
drivers/net/can/slcan.c: In function 'slcan_open': drivers/net/can/slcan.c:568: error: dereferencing pointer to incomplete type Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-08can: add slcan driver for serial/USB-serial CAN adaptersOliver Hartkopp
This patch adds support for serial/USB-serial CAN adapters implementing the LAWICEL ASCII protocol for CAN frame transport over serial lines. The driver implements the SLCAN line discipline and is heavily based on the slip.c driver. Therefore the code style remains similar to slip.c to be able to apply changes of the SLIP driver to the SLCAN driver easily. For more details see the slcan Kconfig entry. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02can: EG20T PCH: Delete unnecessary spin_lockTomoya
Delete unnecessary spin_lock for accessing Message Object. Since all message objects are divided into tx/rx area completely, spin_lock processing is unnecessary. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02can: EG20T PCH: Enumerate LEC macrosTomoya
For easy to readable, LEC #define macros are replaced to enums. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02can: EG20T PCH: Change Message Object IndexTomoya
For easy to readable, add Message Object index like below. PCH_RX_OBJ_START PCH_RX_OBJ_END PCH_TX_OBJ_START PCH_TX_OBJ_END Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02can: EG20T PCH: Separate Interface Register(IF1/IF2)Tomoya
CAN register of Intel PCH EG20T has 2 sets of interface register. To reduce whole of code size, separate interface register. As a result, the number of function also can be reduced. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18can: EG20T PCH: use BIT(X)Tomoya
Replace bit assignment value to BIT(X). For easy to readable/identifiable, replace all bit assigned macros to BIT(X) Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18can: EG20T PCH: add prefix to macroTomoya
For easy to readable/identifiable, add prefix "PCH_" to all of #define macros. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/can/sja1000: Use printf extension %pR for struct resourceJoe Perches
Using %pR standardizes the struct resource output. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-09drivers/net/can: Update WARN usesJoe Perches
Add missing newlines. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30netdev: can: Change mail address of Hans J. KochHans J. Koch
My old mail address doesn't exist anymore. This changes all occurrences to my new address. Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30can: pch_can: fix section mismatch warning by using a whitelisted nameMarc Kleine-Budde
This patch fixes the following section mismatch warning: WARNING: drivers/net/can/pch_can.o(.data+0x18): Section mismatch in reference from the variable pch_can_pcidev to the variable .devinit.rodata:pch_pci_tbl The variable pch_can_pcidev references the variable __devinitconst pch_pci_tbl This is actually a false positive which is fixed by giving the offending variable a whitelisted name, it's renamed to "pch_can_pci_driver". This makes sense because the variable is of the type "struct pci_driver". Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30can: pch_can: fix sparse warningMarc Kleine-Budde
This patch fixes the following sparse warning: drivers/net/can/pch_can.c:231:26: warning: incorrect type in argument 1 (different address spaces) drivers/net/can/pch_can.c:231:26: expected unsigned int [usertype] *addr drivers/net/can/pch_can.c:231:26: got unsigned int [noderef] <asn:2>*<noident> Let pch_can_bit_{set,clear} first parameter be a void __iomem pointer. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26can: mcp251x: fix reception of standard RTR framesMarc Kleine-Budde
This patch sets the missing CAN_RTR_FLAG if a standard RTR frame is received. (For extended frames the CAN_RTR_FLAG was already set correctly.) Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26can: flexcan: fix use after free of privMarc Kleine-Budde
The priv is part of the memory allocated by alloc_candev(). This patch moved the free it after last usage of priv. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25pch_can: depends on PCIRandy Dunlap
Fix pch_can build when CONFIG_PCI is not enabled. It uses pci interfaces and data structures, so it should depend on PCI. drivers/net/can/pch_can.c:1044: error: implicit declaration of function 'pci_enable_msi' drivers/net/can/pch_can.c:1079: error: implicit declaration of function 'pci_disable_msi' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24can: tscan1: add driver for TS-CAN1 boardsAndre B. Oliveira
Add driver for Technologic Systems TS-CAN1 PC104 peripheral boards. Signed-off-by: Andre B. Oliveira <anbadeol@gmail.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24can: at91_can: add KBUILD_MODNAME to bittiming constantMarc Kleine-Budde
While there replace all usage of self defined DRV_NAME by KBUILD_MODNAME. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24can: at91_can: convert dev_<level> printing to netdev_<level>Marc Kleine-Budde
While there, remove "printk()" on driver loading. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-06 16:36:16 +0000