summaryrefslogtreecommitdiffstats
path: root/drivers/net/cpmac.c
AgeCommit message (Collapse)Author
2011-08-12davinci*/tlan/cpmac: Move the Texas Instruments (TI) driversJeff Kirsher
Move the Texas Instruments drivers to drivers/net/ethernet/ti/ and make the necessary Kconfig and Makefile changes. CC: Sriram <srk@ti.com> CC: Vinay Hegde <vinay.hegde@ti.com> CC: Cyril Chemparathy <cyril@ti.com> CC: Samuel Chessman <chessman@tux.org> CC: <torben.mathiasen@compaq.com> CC: Eugene Konev <ejka@imfi.kspu.ru> CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-11net: fix MIPS fallout from "net: remove interrupt.h inclusion from netdevice.h"Alexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02drivers/net: avoid some skb->ip_summed initializationsEric Dumazet
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25drivers/net: Remove address use from assignments of function pointersJoe Perches
"foo = &function" is more commonly written "foo = function" Done with coccinelle script: // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> drivers/net/tehuti.c used a function and struct with the same name, the function was renamed. Compile tested x86 only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17cpmac: fix all checkpatch errors and warningsFlorian Fainelli
This patches fixes a couple of checkpatch warnings and errors: - lines over 80 columns - printk() instead of pr_cont() - assignments in tests (if ((foo == bar()))) Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16drivers/net: Adjust confusing if indentationJulia Lawall
Outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18net: preserve ifreq parameter when calling generic phy_mii_ioctl().Richard Cochran
The phy_mii_ioctl() function unnecessarily throws away the original ifreq. We need access to the ifreq in order to support PHYs that can perform hardware time stamping. Two maverick drivers filter the ioctl commands passed to phy_mii_ioctl(). This is unnecessary since phylib will check the command in any case. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-06-30cpmac: use resource_size()Dan Carpenter
The original code is off by one because we should start counting at zero. So the size of the resource is end - start + 1. I switched it to use resource_size() to do the calculation. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cpmac: do not leak struct net_device on phy_connect errorsFlorian Fainelli
If the call to phy_connect fails, we will return directly instead of freeing the previously allocated struct net_device. Signed-off-by: Florian Fainelli <florian@openwrt.org> CC: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10net: trans_start cleanupsEric Dumazet
Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03net: convert multicast list to list_headJiri Pirko
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07cpmac: bump version to 0.5.2Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07cpmac: fallback to switch mode if no PHY chip foundFlorian Fainelli
If we were unable to detect a PHY on any of the MDIO bus id we tried instead of bailing out with -ENODEV, assume the MAC is connected to a switch and use MDIO bus 0. This unbreaks quite a lot of devices out there whose switch cannot be detected. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07cpmac: fix the receiving of 802.1q framesFlorian Fainelli
Despite what the comment above CPMAC_SKB_SIZE says, the hardware also needs to account for the FCS length in a received frame. This patch fix the receiving of 802.1q frames which have 4 more bytes. While at it unhardcode the definition and use the one from if_vlan.h. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-03cpmac: use after freeDan Carpenter
The original code dereferenced "cpmac_mii" after calling "mdiobus_free(cpmac_mii);" Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/firmware/iscsi_ibft.c
2010-02-27MIPS: AR7: Implement clock APIFlorian Fainelli
This patch makes the ar7 clock code implement the Linux clk API. Drivers using the various clocks available in the SoC are updated accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Wim Van Sebroeck <wim@iguana.be> To: linux-mips@linux-mips.org Cc: Wim Van Sebroeck <wim@iguana.be> Cc: netdev@vger.kernel.org Cc: David Miller <davem@davemloft.net> Patchwork: http://patchwork.linux-mips.org/patch/881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-17net: convert multiple drivers to use netdev_for_each_mc_addrJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-13drivers/net/cpmac.c: Correct code taking the size of a pointerJulia Lawall
sizeof(dev->dev_addr) is the size of a pointer. On the other hand, sizeof(pdata->dev_addr) is the size of an array, so use that instead. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net: Use netdev_alloc_skb_ip_align()Eric Dumazet
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21cpmac: fix compilation errors against undeclared BUS_ID_SIZEFlorian Fainelli
With the removal of BUS_ID_SIZE, cpmac was not fully converted to use MII_BUS_ID_SIZE as it ought to. This patch fixes the following cpmac build failure: CC drivers/net/cpmac.o drivers/net/cpmac.c: In function 'cpmac_start_xmit': drivers/net/cpmac.c:563: warning: comparison of distinct pointer types lacks a cast drivers/net/cpmac.c: In function 'cpmac_probe': drivers/net/cpmac.c:1112: error: 'BUS_ID_SIZE' undeclared (first use in this function) drivers/net/cpmac.c:1112: error: (Each undeclared identifier is reported only once drivers/net/cpmac.c:1112: error: for each function it appears in.) Reported-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05cpmac: bump version to 0.5.1Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05cpmac: wait longer after MDIO resetFlorian Fainelli
This patch slows down the MDIO_ALIVE busy waiting to let switches and PHY come up after reset. Previous loop was too quick for IC+175C and ADM6996C/L switches to come up. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05cpmac: add support for fixed PHYFlorian Fainelli
This patch adds support for fixed PHY connected in MII mode to cpmac. We allow external and dumb_switch module parameters to override the PHY detection process since they are always connected with MDIO bus identifier 0. This lets fixed PHYs to be detected correctly and be connected to the their corresponding MDIO bus identifier. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05cpmac: fix wrong MDIO bus identifierFlorian Fainelli
This patch fixes the wrong MDIO bus identifier which was set to 0 unconditionaly, suitable for external switches while it is actually 1 for PHYs different than external switches which are autodetected. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24cpmac: fix compilation failure introduced with netdev_ops conversionFlorian Fainelli
This patch fixes and obvious typo in the netdev_ops initialization: ndo_so_ioctl should be ndo_do_ioctl. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01cpmac: prevent fatal exception in cpmac_end_xmitStefan Weil
We should not be stopping the subqueues in cpmac_end_xmit but rather test the status of them. Replace the calls to netif_subqueue_stop by __netif_subqueue_stopped. This fixes an unrecoverable exception from happening when running the driver. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01cpmac: remove unused variable.Florian Fainelli
This patch removes the unused variables in cpmac_hw_error, cpmac_tx_timeout and cpmac_probe. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26cpmac: Remove references to BUS_ID_SIZE, use MII_BUS_ID_SIZE.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16cpmac: convert to net_device_opsAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21net: Remove redundant NAPI functionsBen Hutchings
Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08phylib: move to dynamic allocation of struct mii_busLennert Buytenhek
This patch introduces mdiobus_alloc() and mdiobus_free(), and makes all mdio bus drivers use these functions to allocate their struct mii_bus'es dynamically. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Andy Fleming <afleming@freescale.com>
2008-08-14[netdrvr] remove unnecessary #includeHuang Weiyi
The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/net/acenic.c drivers/net/bnx2x_link.c drivers/net/bnx2x_main.c drivers/net/cpmac.c drivers/net/gianfar_sysfs.c drivers/net/ipg.h drivers/net/ppp_mppe.c drivers/net/pppol2tp.c drivers/net/r6040.c drivers/net/sh_eth.c drivers/net/sky2.c drivers/net/tehuti.h drivers/net/typhoon.c This patch removes the said #include <linux/version.h>. Signed-off-by: Huang Weiyi <hwy@cn.fujitsu.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netdev: bunch of drivers: avoid WARN at net/core/dev.c:1328Anton Vorontsov
The drivers were touching net queue before it has been started, so without this patch, the drivers will potentially WARN at net/core/dev.c:1328. I don't have the hardware for the drivers below, so this patch is untested, and thus should be carefully peer reviewed. tc35815.c au1000_eth.c bfin_mac.c macb.c ^ The four drivers are using phylib, they're calling netif_start_queue() in open() callback. So trivially remove netif_tx_schedule_all(). Phylib will handle netif_carrier_*(). cpmac.c fec_mpc52xx.c fs_enet/fs_enet-main.c sh_eth.c ^ The same as above, but these were also needlessly calling netif_carrier_*() functions. So removed queue calls and also remove carrier calls, since phylib will handle it. fs_enet-main.c also didn't call netif_start_queue() at open(), this is fixed now. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17net: Use queue aware tests throughout.David S. Miller
This effectively "flips the switch" by making the core networking and multiqueue-aware drivers use the new TX multiqueue structures. Non-multiqueue drivers need no changes. The interfaces they use such as netif_stop_queue() degenerate into an operation on TX queue zero. So everything "just works" for them. Code that really wants to do "X" to all TX queues now invokes a routine that does so, such as netif_tx_wake_all_queues(), netif_tx_stop_all_queues(), etc. pktgen and netpoll required a little bit more surgery than the others. In particular the pktgen changes, whilst functional, could be largely improved. The initial check in pktgen_xmit() will sometimes check the wrong queue, which is mostly harmless. The thing to do is probably to invoke fill_packet() earlier. The bulk of the netpoll changes is to make the code operate solely on the TX queue indicated by by the SKB queue mapping. Setting of the SKB queue mapping is entirely confined inside of net/core/dev.c:dev_pick_tx(). If we end up needing any kind of special semantics (drops, for example) it will be implemented here. Finally, we now have a "real_num_tx_queues" which is where the driver indicates how many TX queues are actually active. With IGB changes from Jeff Kirsher. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17netdev: Kill NETIF_F_MULTI_QUEUE.David S. Miller
There is no need for a feature bit for something that can be tested by simply checking the TX queue count. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08net: Delete NETDEVICES_MULTIQUEUE kconfig option.David S. Miller
Multiple TX queue support is a core networking feature. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-22cpmac bugfixes and enhancementsMatteo Croce
* Resolve some locking issues using atomic_inc/atomic_dec * move status code in cpmac_check_status * unmark the BROKEN flag in Kconfig * move code which should have been in platform code in arch/mips/ar7/platform.c * fixed an IRQ storm which lets the kernel hang * fixed a double call to netif_start_queue which causes a kernel panic * don't fail to register the PHY, works on many devices now Signed-off-by: Matteo Croce <matteo@openwrt.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25net drivers: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable network platform drivers, to re-enable auto loading. NOTE: didn't change drivers/net/fs_enet/fs_enet-main.c "old binding" support. That looks problematic in the first place (it even uses the ancient "struct device_driver" binding scheme for platform_bus!) and I suspect it will vanish soonish when arch/powerpc rules the world. Also, drivers/net/ne.c would have needed more thought to sort out. [akpm@linux-foundation.org: fix sgiseeq.c] [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Scott Wood <scottwood@freescale.com> Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Dale Farnsworth <dale@farnsworth.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16phy: Change mii_bus id field to a stringAndy Fleming
Having the id field be an int was making more complex bus topologies excessively difficult. For now, just convert it to a string, and change all instances of "bus->id = val" to snprintf(id, MII_BUS_ID_LEN, "%x", val). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-02-05cpmac: convert to new Fixed PHY infrastructureAnton Vorontsov
This patch converts cpmac to the new Fixed PHY infrastructure, though it doesn't fix all the problems with that driver. I didn't even bother to test this patch to compile, because cpmac driver is broken in several ways: 1. This driver won't compile by itself because lack of its header describing platform data; 2. It assumes that fixed PHYs should be created by the ethernet driver. It is wrong assumption: fixed PHYs creation is platform code authority, driver must blindly accept bus_id and phy_id platform data variables instead. Also, it seem that that driver doesn't have actual in-tree users, so nothing to fix further. The main purpose of that patch is to get rid of the following Kconfig warning: scripts/kconfig/conf -s arch/powerpc/Kconfig drivers/net/Kconfig:1713:warning: 'select' used by config symbol 'CPMAC' refers to undefined symbol 'FIXED_MII_100_FDX' Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[netdrvr] irq handler minor cleanups in several driversJeff Garzik
* use irq_handler_t where appropriate * no need to use 'irq' function arg, its already stored in a data struct * rename irq handler 'irq' argument to 'dummy', where the function has been analyzed and proven not to use its first argument. * remove always-false "dev_id == NULL" test from irq handlers * remove pointless casts from void* * declance: irq argument is not const * add KERN_xxx printk prefix * fix minor whitespace weirdness Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-18Replace cpmac fixMatteo Croce
Please apply this patch since i reverted by mistake the commit 4e3ab47a547616e583c7a5458beced6aa34c8ef3 in 6cd043d99dcf5d252fcc682958541f449113f7b3 Signed-off-by: Matteo Croce <technoboy85@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-25cpmac: update to new fixed phy driver interfaceEugene Konev
Use fixed_mdio_get_phydev for obtaining fixed phy instances and adopt to changed fixed phy device naming. Signed-off-by: Eugene Konev <ejka@imfi.kspu.ru> Signed-off-by: Jeff Garzik <jeff@garzik.org>