summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2014-06-06i40e: don't remove HMC that doesn't existShannon Nelson
If a reset recovery failed (e.g. firmware is broken), the HMC space won't get set up. We don't need to try to delete it if it didn't get set up. This stops some needless error messages when we already know we need to just tear things down. Change-ID: Iac600481765e20b136052b43a544e55d7870268b Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: print full link messageJesse Brandeburg
The i40e driver should print link messages like all the other Intel Ethernet drivers. Change-ID: Ia88bdb96794e17a3962fcea94db176de01f921f7 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add xcast stats for portShannon Nelson
Add the missing unicast, multicast, and broadcast stats for the port. Change-ID: Ifc366d7b7745f70eaac9d00eeb0694eb9ec076a9 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add vsi x-cast statsShannon Nelson
Add VSI HW stats for unicast, multicast, and broadcast for Rx and Tx. Stop printing the netdev multicast value because it doesn't include Tx and would be confusing. Change-ID: I08278b6657e7c838fd29a4a1f305f78fe1b150be Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: increase reset wait timeShannon Nelson
The wait time was originally too optimistic and the resets were failing after EMPR. This increases the loop count to wait considerably longer. This won't delay the actual wait longer than really needed, just allows us to poll more times as needed. Change-ID: If7b96f55cc25b8d06cbbe8665259d250188c53d7 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: add Tx pre queue disable functionMatt Jared
Add a function which indicates our intention to enable or disable a particular Tx queue. Also add a function to notify the device's Tx unit that we're about to enable or disable a Tx queue. Change-ID: I6adf3cbb5bb3e3c984d1ec969e06577c19ef296d Signed-off-by: Matt Jared <matthew.a.jared@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: check AQ register for valid dataKamil Krawczyk
B0 Si blocks AQ registers when in Blank Flash mode - write is dropped, read gives 0xDEADBEEF. Introduce a simple check for a correct value in one of the AQ registers to be sure that AQ was configured correctly. Without this check we get into an endless loop while trying to send GetVersion AQ cmd. Change-ID: I00102b8c5fa6c16d14289be677aafadf87f10f0d Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40evf: make messages less direMitch Williams
Depending on the timing of what the PF driver is doing, it make take a few tries before the VF driver is able to communicate with the PF driver on init or reset recovery. In order to prevent confusion, make the most common messages less scary by lowering them to a less terrifying log level and indicate that the driver will retry. Change-ID: I1ec22aa59a68f4469aabe14775a1bfc1ab4b7f2f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: print message for pre-production hardwareJesse Brandeburg
The driver and hardware are not expected to work correctly with revision_id 0 hardware. Don't prevent the user from using it, but be sure to print a warning. Change-ID: I3712d34752bfad458078a5f35dfd0aa0ae9fd20e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add VEB stats to ethtoolShannon Nelson
Print the VEB statistics in the ethtool stats output. Change-ID: Ic93d4c3922345c43e4cfd7f7e7a906844dd2f49f Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: set lan_veb indexShannon Nelson
When the VEB is created for the basic LAN device and its VSIs, we need to set the tracking lan_veb index for later use. Change-ID: I66bb74993bbda3621ca557437cb4b3517f9b315b Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: add missing VSI statisticsShannon Nelson
Add a couple more statistics that the hardware offers but aren't part of the standard netdev stats. Change-ID: I201db2898f2c284aee3d9631470bc5edd349e9a5 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e/i40evf: remove rx_errors and rx_missedShannon Nelson
The rx_errors (GLV_REPC) and rx_missed (GLV_RMPC) were removed from the chip design. Change-ID: Ifdeb69c90feac64ec95c36d3d32c75e3a06de3b7 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: refactor stats collectionShannon Nelson
Pull the PF stat collection out of the VSI collection routine, and add a unifying stats update routine to call the various stat collection routines. Change-ID: I224192455bb3a6e5dc0a426935e67dffc123e306 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: refactor send versionJesse Brandeburg
This change moves some common code in two places into a small helper function, and corrects a bug in one of the two places in the process. Change-ID: If3bba7152b240f13a7881eb0e8a781655fa66ce7 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e/i40evf: VEB structure added, GTIME macro updateKamil Krawczyk
Structure for VEB context added. Update macro for transition from ms to GTIME (us) time units. Change-ID: Ib3a19587b4cf355348655df8f60c6f37bb1497a3 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: notify VF of all types of resetsMitch Williams
Currently, the PF driver only notifies the VFs for PF reset events. Instead, notify the VFs for all types of resets, so they can attempt a graceful reinit. Change-ID: I03eb7afde25727198ef620f8b4e78bb667a11370 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40evf: fix crash when changing ring sizesMitch Williams
i40evf_set_ringparam was broken in several ways. First, it only changed the size of the first ring, and second, changing the ring size would often result in a panic because it would change the count before deallocating resources, causing the driver to either free nonexistent buffers, or leak leftover buffers. Fix this by storing the descriptor count in the adapter structure, and updating the count for each ring each time we allocate them. This ensures that we always free the right size ring, and always end up with the requested count when the device is (re)opened. Change-ID: I298396cd3d452ba8509d9f2d33a93f25868a9a55 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40evf: set descriptor multiple to 32Mitch Williams
Hardware requires descriptors to be allocated in groups of 32. Change-ID: I752ccc96769d1bd8d3018c004b8aeff464045bf2 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: clamp jumbo frame sizeJesse Brandeburg
The driver was allowing the user to set larger size MTU than the hardware was being configured to support. The driver was already using VLAN_HLEN when setting the hardware max receivable frame size, so just add it to the netdev MTU set entry point as well. Change-ID: Ie20e2a35d04f8c411253e255bea79ca69aaeaea3 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e/i40evf: remove unused RX_LRO defineJesse Brandeburg
Remove unused defines and macros for RX_LRO. Change-ID: I8ca6715edfa62b56837417a1c4ff68c2345dab6e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: remove check for large bufferKamil Krawczyk
We introduced this check in case this structure changed in the future, the AQ definition is now mature enough that this check is no longer necessary. Change-ID: Ic66321d0a08557dc9d8cb84029185352cb534330 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: Rework register diagnosticKamil Krawczyk
Register range, being subject to register diagnostic, can vary among different NVMs. We will try to identify the full range and use it for a register test. This is needed to avoid false test results. If we fail to define the proper register range we will test only the first register from that group. Change-ID: Ieee7173c719733b61d3733177a94dc557eb7b3fd Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: don't use OR to check a valueJesse Brandeburg
A couple of FD checks ended up using bitwise OR to check a value, which ends up always being evaluated to true. This should fix the issue. Thanks to DaveJ for noticing and reporting the issue! CC: Dave Jones <davej@redhat.com> Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-03e1000: Use time_after() for time comparisonManuel Schölling
To be future-proof and for better readability the time comparisons are modified to use time_after() instead of plain, error-prone math. Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-03e1000: remove the check: skb->len<=0Yongjian Xu
There is no case skb->len would be 0 or 'negative'. Remove the check. Signed-off-by: Yongjian Xu <xuyongjiande@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-03igb: add defaults for i210 TX/RX PBSIZETodd Fujinaka
Set the defaults on probe for the packet buffer size registers for the i210. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-03igb: use mac loopback for i354 backplaneTodd Fujinaka
We can't know what PHY is to be used for i354 backplane, so use MAC loopback for ethtool tests. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-03igb: rename igb_ptp_enable to igb_ptp_feature_enableJacob Keller
The name igb_ptp_enable is not synonymous with the purpose of this function, so rename it to better explain its purpose. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-03ixgbe: remove linux/export.h header from ixgbe_ptp.cJacob Keller
We don't need this header file, so we shouldn't be including it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-03ixgbe: fix detection of SFP+ capable interfacesEmil Tantilov
In cases where the driver is loaded while there are no SFP+ modules in the cage the interface was not being detected as SFP capable. To account for this the driver called identify_sfp in ixgbe_get_settings to make sure the data is correct. However when there is no SFP+ module in the cage the driver waits for the I2C reads to time out which can take more than a second and will cause issues with tools (like net-snmp) that may poll for that information. This patch resolves the issue by identifying interfaces with no PHY type set as SFP capable which allows the driver to detect the SFP module when the interface is brought up. As result of this we can also remove the identify_sfp call from ixgbe_get_settings. v2: remove the 82599 specific check since we have 82598 devices that are SFP capable. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...
2014-06-02Merge branch 'ethtool-rssh-fixes' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/net-next Ben Hutchings says: ==================== Pull request: Fixes for new ethtool RSS commands This addresses several problems I previously identified with the new ETHTOOL_{G,S}RSSH commands: 1. Missing validation of reserved parameters 2. Vague documentation 3. Use of unnamed magic number 4. No consolidation with existing driver operations I don't currently have access to suitable network hardware, but have tested these changes with a dummy driver that can support various combinations of operations and sizes, together with (a) Debian's ethtool 3.13 (b) ethtool 3.14 with the submitted patch to use ETHTOOL_{G,S}RSSH and minor adjustment for fixes 1 and 3. v2: Update RSS operations in vmxnet3 too ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03ethtool: Replace ethtool_ops::{get,set}_rxfh_indir() with {get,set}_rxfh()Ben Hutchings
ETHTOOL_{G,S}RXFHINDIR and ETHTOOL_{G,S}RSSH should work for drivers regardless of whether they expose the hash key, unless you try to set a hash key for a driver that doesn't expose it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: relax the firmware API version checkShannon Nelson
As long as the Firmware isn't reporting a higher API major version number than what the driver knows about, the driver does not need to worry as much about greater minor numbers. The API changes minor numbers when things get added to the API, but no existing structs or calls are changed. The driver has the option of warning that the minor numbers don't match. This will allow a little more flexibility in handling newer NICs and NVMs in the field. Change-ID: I5302acd2d147a2992328991ee7223b2ff39c8741 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40evf: don't use RESETTING state during reinitMitch Williams
The RESETTING state means that a Catastrophic Hardware Bad Thing is happening and the driver need to tiptoe around and not use the admin queue or registers or anything like that. On the other hand, a reinit is no big deal and we can use the admin queue, and we should. So don't set the state to RESETTING here. This fixes a Tx hang and FW crash that happens after setting the MTU on a VF. Change-ID: I3e6191edbd6a93958a1f1bd1d41a5c2d17474d41 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40: disable FCoE for MFP modesVasu Dev
Currently FCoE is not supported with MFP modes, so this patch makes sure it is disabled. It is disabled by overriding HW FCoE capability, so that later it can be re-enabled by just the SW upgrade. Change-ID: I1c0bae5c099b209f56b88bda360031a8565e43e8 Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-By: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: add clear_pxe AdminQ requestShannon Nelson
Add the clear_pxe AdminQ API call. Change-ID: Ia770ff3404971bb3889b53a39c3a7bfaf3f4d399 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: Clear recovery pending, if reset failedAkeem G Abodunrin
If pf_reset failed, it becomes necessary to clear recovery pending bit, instead of falling through the setup process. Change-ID: Ic1611e6a32741fe3a2782ec7be173cb65e7492ed Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Change type to u32 to avoid sparse errorGreg Rose
tx_lpi_status and rx_lpi_status are declared as bool but then used in sizeof operations in the CORE driver code. Make them u32 to make sparse be quiet. Change-ID: Iad6daeb1c7149e61ece242acd18c64b320c246a3 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: remove storm controlJesse Brandeburg
The storm control features are not part of the hardware and mistakenly were left in the code. Remove them as they are not needed any more. Change-ID: I6e9277c8da2c52e69348a657bae25271449c2099 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: Use the new i40e_get_fd_cnt_all function in other placesAnjali Singhai Jain
We have a function to calculate this, so update the code to use the function. Change-ID: Ia345b6fe6ec7f0b2dcf1199471b0d0f959ad3908 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: Report cmd->data in ETHTOOL_GRXCLSRLCNT instead of ETHTOOL_GRXCLSRULEAnjali Singhai Jain
Based on review feedback from upstream cmd->data is not defined in ETHTOOL_GRXCLSRULE but needs to be reported in ETHTOOL_GRXCLSRLCNT. Also use a helper function to calculate the total filter count. Change-ID: Iaacbf729527b73290c4fdad837b379b44fd7dd20 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Remove reserved PCTYPE definesKevin Scott
Patch to remove PCTYPE definitions which are now reserved. Change-ID: I66c1c16a45a16f4894b2983101ab2a48ce03f1f4 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: Tx/Rx rings declarationAkeem G Abodunrin
This patch changes the declaration of Tx/Rx rings inside several loops. It eliminates declaring the same rings every time for the duration of the loop, instead declaring them once before the loop. Change-ID: I59dea54276f18c47dca522f520c18f65fe42a15d Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40evf: tweak Tx rate params and de-magic-ifyMitch Williams
In order for the VF to achieve its programmed Tx rate, we need to set the max credits value to 4. While we're at it, get rid of some magic numbers. Change-ID: I4f17b4d3a90f1e069bdd134a543f0aa22feac3a9 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40evf: don't round Tx rate down to 0Mitch Williams
Because the hardware configures VF Tx rates in increments of 50 Mbps, values smaller than that would be rounded down to 0, which was interpreted as no limit at all. Rather than do this, we round up to 50 Mbps and notify the user. Change-ID: I5275848233fe7514cf93e11323661c68f4c38737 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: enable descriptor prefetch for VFsMitch Williams
As recommended by the hardware guys, enable descriptor prefetch for rings belonging to VFs. This matches a change already made for ring belonging to the PF. Change-ID: Idcc4dc7064bc9144ea81f5701ad07b7ecd11ba49 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Update check for AQ alivenessKevin Scott
Update the i40e_check_asq_alive check to ensure that the len register offset is non-zero, indicating that SW has initialized the AQ. Change-ID: I9c2e804788b4775bef9c7e80954ab004e6bdb306 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-27i40evf: Use is_multicast_ether_addr helperTobias Klauser
Use the is_multicast_ether_addr helper function from linux/etherdevice.h instead of open coding the multicast address check. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-04-14 10:11:31 +0000