summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ti
AgeCommit message (Collapse)Author
2014-07-24drivers: net: cpsw: cleanup: remove unused functionMugunthan V N
removing unused function as part of driver cleanup.` Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22drivers: net: cpsw: add support to dump ALE table via ethtool register dumpMugunthan V N
Add support to view addresses added by the driver and learnt by the hardware from ALE table via ethtool register dump interface. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16net: davinci_mdio: allow to create phys from dtGrygorii Strashko
This patch allows to create PHYs from DT in case if they are explicitly defined. The of_mdiobus_register() is used for such purposes. For backward compatibility, call of_mdiobus_register() only in case if at least one PHY's child is defined in DT, otherwise rollback to mdiobus_register(). Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16net: davinci_mdio: reuse for keystone2 archGrygorii Strashko
The similar MDIO HW blocks is used by keystone 2 SoCs as in Davinci SoCs: - one in Gigabit Ethernet (GbE) Switch Subsystem See http://www.ti.com/lit/ug/sprugv9d/sprugv9d.pdf - one in 10 Gigabit Ethernet Subsystem See http://www.ti.com/lit/ug/spruhj5/spruhj5.pdf Hence, reuse Davinci MDIO driver for Keystone 2 and enable TI networking for Keystone 2 devices Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15drivers: net: cpsw: disable coalesce when rx_coalesce_usecs is zeroMugunthan V N
instead of return error on zero rx_coalesce_usecs, disable coalesce Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10net: cpmac: fix in debug messagesVarka Bhadram
This patch fix the debug message format. This patch changes to the commit f160a2d0b524eeebd97a68e2fbb59fad4cdd3fee: net: cpmac: dynamic debug fixes When we use pr_debug()/netdev_dbg() new lines are inserting in b/w the values. The format when i use the printk() These formats used in skb dump and reg dump. This functions called from the entire code. So this will be enabled all the lines. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10net: cpmac: fix in releasing resourcesVarka Bhadram
before registering the the net device this code freeing net device by using the label 'fail' fixed by introducing an another label 'out' Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10net: cpmac: fix proper spacing before return statementVarka Bhadram
This patch insert proper spaces before return statement. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10net: cpmac: fix missing a blank line after declarationsVarka Bhadram
This patch insert a blank line after declaration Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10net: cpmac: fix cpmac driver structureVarka Bhadram
This patch changes to style of declarattion which follows every driver Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10net: cpmac: dynamic debug fixesVarka Bhadram
This patch does the following changes 1. convert printk(KERN_DEBUG.. to netdev_dbg() if we have net_device object or convert to dev_dbg() if we have device object. 2. convert printk(KERN_WARNING.. to netdev_warn() if we have net_device object or convert to dev_warn() if we have device object 3. convert printk() to pr_* Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10net: cpmac: fix commentsVarka Bhadram
This patch convert the normal comments to networking subsystem style comments. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10net: cpmac: remove space in macro definationVarka Bhadram
This patch fix the space after '#' in macro defination Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07tlan: Isolate external PHY when using internal PHYOndrej Zary
When using internal 10 Mbps PHY, isolate the external PHY from MII bus. External PHY must be kept powered up because it passes TX from tlan chip to network. This fixes weird link-loss problems under load with OC-2326 card at 10 Mbps. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07tlan: Enable device at resumeOndrej Zary
pci_disable_device() is called in _suspend but there's no corresponding pci_enable_device() in _resume. This causes "disabling already-disabled device" warning on 2nd suspend. Add pci_enable_device() call to _resume to fix this problem. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07tlan: Don't disable internal PHY on cards that use it in 10 Mbps modeOndrej Zary
In tlan_reset_adapter, we disable internal PHY when an external one is used. On cards which use internal PHY in 10 Mbps mode, we enable it later when setting 10 Mbps mode but it does not really work (PHY fails to reset). Leave it enabled instead. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07tlan: Add PHY reset timeoutOndrej Zary
Add a timeout to prevent infinite loop waiting for PHY to reset. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07tlan: Make autonegotiation fasterOndrej Zary
Reduce the autonegotiation poll interval from 8 seconds to 2. This greatly reduces the time needed to detect link presence, especially on Olicom cards at 10 Mbps (two autonegoatiations required). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07tlan: Don't scream if no linkOndrej Zary
Remove excess printks when the link is down. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07tlan: Restart autonegotiation on link lossOndrej Zary
When link is lost on a card which uses internal PHY for 10 Mbit speeds, restart autonegotiation to allow switching between 10 and 100 Mbps speeds. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07tlan: Fix MAC address byte order on OC-2325/OC-2326Ondrej Zary
Olicom OC-2325 and OC-2326 cards have the MAC address byte-swapped in EEPROM. Byte-swap the MAC address if it's located at offset 0xF8. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07tlan: Add ethtool supportOndrej Zary
Add basic ethtool support to tlan driver: - driver info - link detect (this allows NetworkManager to detect carrier) - EEPROM read Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07tlan: Enable link monitoringOndrej Zary
Enable old link monitoring code and modify it: - control LINK LED - use separate timer so it does not interfere with ACT LED Tested with Olicom OC-2326. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07tlan: Enable activity LED on Olicom OC-2325 and OC-2326Ondrej Zary
Olicom OC-2325 and OC-2326 ethernet cards have an activity LED but it does not work with tlan driver as it's not enabled. Enable it. Tested with OC-2326. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07ptp: Classify ptp over ip over vlan packetsStefan Sørensen
This extends the ptp bpf to also match ptp over ip over vlan packets. The ptp classes are changed to orthogonal bitfields representing version, transport and vlan values to simplify matching. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-21drivers: net: cpsw: fix dual EMAC stall when connected to same switchMugunthan V N
In commit 629c9a8fd0bbdfc6d702526b327470166ec39c6b (drivers: net: cpsw: Add default vlan for dual emac case also), api cpsw_add_default_vlan() also changes the port vlan which is required to seperate the ports which results in the following behavior In Dual EMAC mode, when both the Etnernet connected is connected to same switch, it creates a loop in the switch and when a broadcast packet is received it is forwarded to the other port which stalls the whole switch and needs a reset/power cycle to the switch to recover. So intead of using the api, add only the default VLAN entry in dual EMAC case. Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11drivers: net: davinci_cpdma: double free on errorDan Carpenter
We recently change the kzalloc() to devm_kzalloc() so freeing "ctlr" here could lead to a double free. Fixes: e194312854ed ('drivers: net: davinci_cpdma: Convert kzalloc() to devm_kzalloc().') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: include/net/inetpeer.h net/ipv6/output_core.c Changes in net were fixing bugs in code removed in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02net: davinci_emac: Remove unwanted debug/error messageChristian Riesch
In commit cd11cf505318ff24e42f35145f9cdf8596fa1958 I accidentally added an error message. I used it for debugging and forgot to remove it before submitting the patch. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22net: davinci_emac: fix oops caused by uninitialized ndev->devSekhar Nori
Commit e194312854edc22a2faf1931b3c0608fe20cb969 (drivers: net: davinci_cpdma: Convert kzalloc() to devm_kzalloc()) triggered a bug in emac_probe() wherein dev member of net_device is used for devres allocations even before it is initialized. This patch fixes that by using the struct device in platform_device instead. While at it, use &pdev->dev consistently for console messages instead of using ndev->dev for just one case and remove an unnecessary line continuation. Reported-by: Kevin Hilman <khilman@linaro.org> Helped-by: George Cherian <george.cherian@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15ti: Remove trailing semicolon from do {...} while (0) macroJoe Perches
These should not have trailing semicolons so remove them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15drivers: net: davinci_cpdma: Convert kzalloc() to devm_kzalloc().George Cherian
Convert kzalloc() to devm_kzalloc(). Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15net: davinci_mdio: Convert pr_err() to dev_err() callGeorge Cherian
Convert the lone pr_err() to dev_err() call. Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15driver net: cpsw: Convert pr_*() to dev_*() callsGeorge Cherian
Convert all pr_*() calls to dev_*() calls. No functional changes. Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13drivers: net: cpsw-phy-sel: add am43xx platform supportMugunthan V N
AM43xx phy mode selection is similar to AM33xx platform, so adding only the compatibility string to the driver Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13drivers: net: cpsw-phy-sel: add dra7xx support for phy selMugunthan V N
Add dra7xx support for selecting the phy mode which is present in control module of dra7xx SoC Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13drivers: net: cpsw-phy-sel: initialize priv->devMugunthan V N
priv->dev is uninitialized, initializing with pdev->dev Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09net: cpsw: add missing of_node_putJohan Hovold
Add missing of_node_put to avoid kref leak. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09net: cpsw: fix null dereference at probeJohan Hovold
Fix null-pointer dereference at probe when the mdio platform device is missing (e.g. when it has been disabled in DT). Cc: stable <stable@vger.kernel.org> # v3.8 Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09Revert "net: eth: cpsw: Correctly attach to GPIO bitbang MDIO driver"Johan Hovold
This reverts commit f8d56d8f892be43a2404356073e16401eb5a42e6 ("net: eth: cpsw: Correctly attach to GPIO bitbang MDIO driver"). Fix potential null-pointer dereference at probe if the mdio-gpio device has not been successfully probed yet. The offending commit is plain wrong for a number of reasons. First of all it accesses internal driver data of an unrelated device. Neither does it check that the data is non-null (which it is in case the device has not been probed yet). Furthermore, the decision on whether to treat any driver data according to the mdio-gpio driver's internals is made based on the node name. But the name is not compared against "mdio" which is the normal name for the node, but rather against "gpio" which the node does not have to be named (and shouldn't be according to the binding documentation). [ If this hack is to be kept out-of-tree it should at least be matching against the compatible property. ] Cc: Stefan Roese <sr@denx.de> Cc: stable <stable@vger.kernel.org> # v3.14 Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05drivers: net: cpsw: Enable Annexe F Time syncGeorge Cherian
Enable the Annex F Time Sync explicitly for DRA7x and AM4372. With this enabled the L2 PTP is working. while at that rename TS_BIT8 to TS_TTL_NONZERO Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05drivers: net: cpsw: Enable CPTS for DRA7xx and AM4372George Cherian
Enable cpts hardware time stamping for Dra7xx and AM4372. This enables PTPv2 for DRA7xx and AM4372. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05drivers: net: cpts: Remove hardcoded clock name for CPTSGeorge Cherian
CPTS refclk name is hardcoded, which makes it fail in case of DRA7x Remove the hardcoded clock name for CPTS refclk and get the same from DT. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02net: davinci_mdio: simplify IO memory mappingGrygorii Strashko
Simplify IO memory mapping by using devm_ioremap_resource() which will do all errors handling and reporting for us. Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02net: davinci_mdio: drop pinctrl_pm_select_default_state from probeGrygorii Strashko
The "default" pinctrl state is set by Drivers core now before calling the driver's probe. Hence, it's safe to drop pinctrl_pm_select_default_state() call from Davinci mdio driver probe. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02net: davinci_mdio: use devm_* apiGrygorii Strashko
Use devm_* API for memory allocation and to get device's clock to simplify driver's code. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-21net: cpmac: remove cpmac_configFlorian Fainelli
cpmac_config() refuses changing the base address parameter, and ignores all other parameters, which means that it is pretty useless as it is, so let's remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11drivers: net: cpsw: enable interrupts after napi enable and clearing ↵Mugunthan V N
previous interrupts When the Ethernet interface is put down and up with heavy Ethernet traffic, then there is prossibility of an interrupt waiting in irq controller to be processed, so when the interface is brought up again just after enable interrupt, it goes to ISR due to the previous unhandled interrutp and in ISR napi is not scheduled as the napi is not enabled in ndo_open which results in disabled interrupt for CPSW and no packets are received in cpsw. So this patch moves enabling of interupts after napi_enable and clearing CPDMA interrupts. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-17 14:44:33 +0000