summaryrefslogtreecommitdiffstats
path: root/drivers/net/fsl_pq_mdio.c
AgeCommit message (Collapse)Author
2010-04-23fsl_pq_mdio: Fix kernel oops during OF address translationAnton Vorontsov
Old P1020RDB device trees were not specifing tbipa address for MDIO nodes, which is now causing this kernel oops: ... eth2: TX BD ring size for Q[6]: 256 eth2: TX BD ring size for Q[7]: 256 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0015504 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0015504] memcpy+0x3c/0x9c LR [c000a9f8] __of_translate_address+0xfc/0x21c Call Trace: [df839e00] [c000a94c] __of_translate_address+0x50/0x21c (unreliable) [df839e50] [c01a33e8] get_gfar_tbipa+0xb0/0xe0 ... The old device trees are buggy, though having a dead ethernet is better than a dead kernel, so fix the issue by using of_iomap(). Also, a somewhat similar issue exist in the probe() routine, though there the oops is only a possibility. Nonetheless, fix it too. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30fsl_pq_mdio: Fix iomem unmapping for non-eTSEC2.0 controllersAnton Vorontsov
We use a rather complicated logic to support eTSEC and eTSEC2.0 registers maps in a single driver. Currently, the code tries to unmap 'regs', but for non-eTSEC2.0 controllers 'regs' doesn't point to a mapping start, and this might cause badness on probe failure or module removal: Freescale PowerQUICC MII Bus: probed Trying to vfree() nonexistent vm area (e107f000) ------------[ cut here ]------------ Badness at c00a7754 [verbose debug info unavailable] NIP: c00a7754 LR: c00a7754 CTR: c02231ec [...] NIP [c00a7754] __vunmap+0xec/0xf4 LR [c00a7754] __vunmap+0xec/0xf4 Call Trace: [df827e50] [c00a7754] __vunmap+0xec/0xf4 (unreliable) [df827e70] [c001519c] iounmap+0x44/0x54 [df827e80] [c028b924] fsl_pq_mdio_probe+0x1cc/0x2fc [df827eb0] [c02fb9b4] of_platform_device_probe+0x5c/0x84 [df827ed0] [c0229928] really_probe+0x78/0x1a8 [df827ef0] [c0229b20] __driver_attach+0xa4/0xa8 Fix this by introducing a proper priv structure (finally!), which now holds 'regs' and 'map' fields separately. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/can/usb/ems_usb.c
2009-11-08net/fsl_pq_mdio: add module license GPLSebastian Siewior
or it will taint the kernel and fail to load becuase of_address_to_resource() is GPL only. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08fsl_pq_mdio: Fix compiler/sparse warnings (part 2)Anton Vorontsov
This patch fixes following warnings: fsl_pq_mdio.c:112:38: warning: cast adds address space to expression (<asn:2>) fsl_pq_mdio.c:124:38: warning: cast adds address space to expression (<asn:2>) fsl_pq_mdio.c:133:38: warning: cast adds address space to expression (<asn:2>) fsl_pq_mdio.c:414:11: warning: cast adds address space to expression (<asn:2>) Instead of adding __force all over the place, introduce convenient fsl_pq_mdio_get_regs() call that does the ugly casting just once. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08fsl_pq_mdio: Fix compiler/sparse warnings (part 1)Anton Vorontsov
commit 1d2397d742b7a2b39b2f09dd9da3b9d1463f55e9 ("fsl_pq_mdio: Add Suport for etsec2.0 devices") introduced the following warnings: CHECK fsl_pq_mdio.c fsl_pq_mdio.c:287:22: warning: incorrect type in initializer (different base types) fsl_pq_mdio.c:287:22: expected unknown type 11 const *__mptr fsl_pq_mdio.c:287:22: got unsigned long long [unsigned] [assigned] [usertype] addr fsl_pq_mdio.c:287:19: warning: incorrect type in assignment (different base types) fsl_pq_mdio.c:287:19: expected unsigned long long [unsigned] [usertype] ioremap_miimcfg fsl_pq_mdio.c:287:19: got struct fsl_pq_mdio *<noident> CC fsl_pq_mdio.o fsl_pq_mdio.c: In function 'fsl_pq_mdio_probe': fsl_pq_mdio.c:287: warning: initialization makes pointer from integer without a cast fsl_pq_mdio.c:287: warning: assignment makes integer from pointer without a cast These warnings are not easy to fix without ugly __force casts. So, instead of introducing the casts, rework the code to substitute an offset from an already mapped area. This makes the code a lot simpler and less duplicated. Plus, from now on we don't actually map reserved registers on non-etsec2.0 devices, so we have more chances to catch programming errors. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02fsl_pq_mdio: Add Suport for etsec2.0 devices.Sandeep Gopalpet
This patch adds mdio support for etsec2.0 devices. Modified the fsl_pq_mdio structure to include the new mdio members. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14net: Fix OF platform drivers coldplug/hotplug when compiled as modulesAnton Vorontsov
Some OF platform drivers are missing module device tables, so they won't load automatically on boot. This patch fixes the issue by adding proper MODULE_DEVICE_TABLE() macros to the drivers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25fsl_pq_mdio: Fix fsl_pq_mdio to work with modulesIonut Nicu
This patch fixes the case when ucc_geth or gianfar are compiled as modules. Without this patch the call to phy_connect() fails. Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03fsl_pq_mido: Set the first UCC as the mii management interface masterHaiying Wang
Current code makes the UCC whose register range includes the current mdio register to be the MII managemnt interface master of the QE. If there is more than one mdio bus for QE, the UCC of the last mdio bus will be the MII management interface master which will make the primary mdio bus working unproperly, e.g. can not get the right clock. Normally the primary mdio bus is the first UEC's mdio bus. This patch allows the first UCC to be the MII management interface master of the multiple UCC mdio buses. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27net: fix fsl_pq_mdio driver to use module_init()Grant Likely
Modules are not supposed to use any of the *_initcall*() hooks as the entry point. fsl_pq_mdio.c was using subsys_initcall_sync() instead of module_init() to guarantee that the MDIO bus was initialized before the Ethernet driver goes looking for the phy. However, the recent OF helpers rework happens to also make sure PHY connection is deferred to .open time, so using an initcall is no longer necessary. This patch replaces the initcall with a more traditional an accepted module_init() call. Tested on Freescale MPC8349emitxgp eval board. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27net: rework fsl_pq_mdio driver to use of_mdio infrastructureGrant Likely
This patch simplifies the driver by making use of more common code. Tested on Freescale MPC8349emitxgp eval board Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02fsl_pq_mdio: Fix compile failureSegher Boessenkool
Add EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name) for module builds Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02fsl_pq_mdio: Revive UCC MDIO supportAnton Vorontsov
commit 1577ecef766650a57fceb171acee2b13cbfaf1d3 ("netdev: Merge UCC and gianfar MDIO bus drivers") introduced a regression so that UCC MDIO buses no longer work. This is because fsl_pq_mdio driver wrongly masks all non-TBI PHYs for !fsl,gianfar-mdio buses, while it should do that only for fsl,gianfar-tbi buses. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23fsl_pq_mdio: Use proper address translationAnton Vorontsov
Currently the driver just read "reg" property for constructing MDIO bus IDs, but this won't work when we'll start using "ranges = <>" in the device tree, so this will pop up: Freescale PowerQUICC MII Bus: probed sysfs: duplicate filename 'mdio@520' can not be created ------------[ cut here ]------------ Badness at c00cb6b8 [verbose debug info unavailable] NIP: c00cb6b8 LR: c00cb6b8 CTR: c001271c REGS: cf82fc10 TRAP: 0700 Not tainted (2.6.29-rc7-03702-g7ccd10f) MSR: 00029032 <EE,ME,CE,IR,DR> CR: 42044022 XER: 20000000 TASK = cf81fbd0[1] 'swapper' THREAD: cf82e000 GPR00: c00cb6b8 cf82fcc0 cf81fbd0 0000003b 00000e42 ffffffff 00004000 00000e42 GPR08: c03cb0fc c03bfbdc 00000e42 c03cac50 22044022 1006a2bc 0ffcb000 00000000 GPR16: 0ffc04b0 0ffc5a40 00000000 0ffc79a8 0f7863a8 00000004 00000000 00000000 GPR24: c033a6a8 d1014520 cf85e840 cf82fd08 cf87cf2c cf82fcd8 cf85dea8 ffffffef NIP [c00cb6b8] sysfs_add_one+0x4c/0x54 LR [c00cb6b8] sysfs_add_one+0x4c/0x54 Call Trace: [cf82fcc0] [c00cb6b8] sysfs_add_one+0x4c/0x54 (unreliable) [cf82fcd0] [c00cbc18] create_dir+0x58/0xc0 [cf82fd00] [c00cbcc0] sysfs_create_dir+0x40/0x70 [cf82fd20] [c0159388] create_dir+0x28/0x78 [cf82fd30] [c0159824] kobject_add_internal+0x98/0x13c [cf82fd50] [c0159e98] kobject_add+0x60/0x98 [cf82fd80] [c018a480] device_add+0x98/0x2ac [cf82fda0] [c01a2380] mdiobus_register+0xbc/0x1c0 [cf82fdc0] [c019f31c] fsl_pq_mdio_probe+0x284/0x2a0 [cf82fe00] [c0223814] of_platform_device_probe+0x5c/0x84 ... This patch fixes the issue by translating the "reg" property to a full address, and thus avoids the duplicate names. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21fsl_pq_mdio: Revive Gianfar TBI PHY supportAnton Vorontsov
commit 1577ecef766650a57fceb171acee2b13cbfaf1d3 ("netdev: Merge UCC and gianfar MDIO bus drivers") broke the TSEC TBI PHY support: the driver now refuses to probe TBI MDIO buses as it doesn't know about "fsl,gianfar-tbi" compatible entry, and thus _probe() fails with -ENODEV status. Fix this by adding "fsl,gianfar-tbi" to the list of known Gianfar MDIO buses. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/tokenring/tmspci.c drivers/net/ucc_geth_mii.c
2009-02-04netdev: Merge UCC and gianfar MDIO bus driversAndy Fleming
The MDIO bus drivers for the UCC and gianfar ethernet controllers are essentially the same. There's no reason to duplicate that much code. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 05:03:29 +0000