summaryrefslogtreecommitdiffstats
path: root/drivers/net/hyperv
AgeCommit message (Collapse)Author
2013-12-21hyperv: Fix race between probe and open callsHaiyang Zhang
Moving the register_netdev to the end of probe to prevent possible open call happens before NetVSP is connected. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17netvsc: don't flush peers notifying work during setting mtuJason Wang
There's a possible deadlock if we flush the peers notifying work during setting mtu: [ 22.991149] ====================================================== [ 22.991173] [ INFO: possible circular locking dependency detected ] [ 22.991198] 3.10.0-54.0.1.el7.x86_64.debug #1 Not tainted [ 22.991219] ------------------------------------------------------- [ 22.991243] ip/974 is trying to acquire lock: [ 22.991261] ((&(&net_device_ctx->dwork)->work)){+.+.+.}, at: [<ffffffff8108af95>] flush_work+0x5/0x2e0 [ 22.991307] but task is already holding lock: [ 22.991330] (rtnl_mutex){+.+.+.}, at: [<ffffffff81539deb>] rtnetlink_rcv+0x1b/0x40 [ 22.991367] which lock already depends on the new lock. [ 22.991398] the existing dependency chain (in reverse order) is: [ 22.991426] -> #1 (rtnl_mutex){+.+.+.}: [ 22.991449] [<ffffffff810dfdd9>] __lock_acquire+0xb19/0x1260 [ 22.991477] [<ffffffff810e0d12>] lock_acquire+0xa2/0x1f0 [ 22.991501] [<ffffffff81673659>] mutex_lock_nested+0x89/0x4f0 [ 22.991529] [<ffffffff815392b7>] rtnl_lock+0x17/0x20 [ 22.991552] [<ffffffff815230b2>] netdev_notify_peers+0x12/0x30 [ 22.991579] [<ffffffffa0340212>] netvsc_send_garp+0x22/0x30 [hv_netvsc] [ 22.991610] [<ffffffff8108d251>] process_one_work+0x211/0x6e0 [ 22.991637] [<ffffffff8108d83b>] worker_thread+0x11b/0x3a0 [ 22.991663] [<ffffffff81095e5d>] kthread+0xed/0x100 [ 22.991686] [<ffffffff81681c6c>] ret_from_fork+0x7c/0xb0 [ 22.991715] -> #0 ((&(&net_device_ctx->dwork)->work)){+.+.+.}: [ 22.991715] [<ffffffff810de817>] check_prevs_add+0x967/0x970 [ 22.991715] [<ffffffff810dfdd9>] __lock_acquire+0xb19/0x1260 [ 22.991715] [<ffffffff810e0d12>] lock_acquire+0xa2/0x1f0 [ 22.991715] [<ffffffff8108afde>] flush_work+0x4e/0x2e0 [ 22.991715] [<ffffffff8108e1b5>] __cancel_work_timer+0x95/0x130 [ 22.991715] [<ffffffff8108e303>] cancel_delayed_work_sync+0x13/0x20 [ 22.991715] [<ffffffffa03404e4>] netvsc_change_mtu+0x84/0x200 [hv_netvsc] [ 22.991715] [<ffffffff815233d4>] dev_set_mtu+0x34/0x80 [ 22.991715] [<ffffffff8153bc2a>] do_setlink+0x23a/0xa00 [ 22.991715] [<ffffffff8153d054>] rtnl_newlink+0x394/0x5e0 [ 22.991715] [<ffffffff81539eac>] rtnetlink_rcv_msg+0x9c/0x260 [ 22.991715] [<ffffffff8155cdd9>] netlink_rcv_skb+0xa9/0xc0 [ 22.991715] [<ffffffff81539dfa>] rtnetlink_rcv+0x2a/0x40 [ 22.991715] [<ffffffff8155c41d>] netlink_unicast+0xdd/0x190 [ 22.991715] [<ffffffff8155c807>] netlink_sendmsg+0x337/0x750 [ 22.991715] [<ffffffff8150d219>] sock_sendmsg+0x99/0xd0 [ 22.991715] [<ffffffff8150d63e>] ___sys_sendmsg+0x39e/0x3b0 [ 22.991715] [<ffffffff8150eba2>] __sys_sendmsg+0x42/0x80 [ 22.991715] [<ffffffff8150ebf2>] SyS_sendmsg+0x12/0x20 [ 22.991715] [<ffffffff81681d19>] system_call_fastpath+0x16/0x1b This is because we hold the rtnl_lock() before ndo_change_mtu() and try to flush the work in netvsc_change_mtu(), in the mean time, netdev_notify_peers() may be called from worker and also trying to hold the rtnl_lock. This will lead the flush won't succeed forever. Solve this by not canceling and flushing the work, this is safe because the transmission done by NETDEV_NOTIFY_PEERS was synchronized with the netif_tx_disable() called by netvsc_change_mtu(). Reported-by: Yaju Cao <yacao@redhat.com> Tested-by: Yaju Cao <yacao@redhat.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02Drivers: hv: remove HV_DRV_VERSIONOlaf Hering
Remove HV_DRV_VERSION, it has no meaning for upstream drivers. Initially it was supposed to show the "Linux Integration Services" version, now it is not in sync anymore with the out-of-tree drivers available from the MSFT website. The only place where a version string is still required is the KVP command "IntegrationServicesVersion" which is handled by tools/hv/hv_kvp_daemon.c. To satisfy such KVP request from the host pass the current string to the daemon during KVP userland registration. Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16hyperv: Fix the NETIF_F_SG flag setting in netvscHaiyang Zhang
SG mode is not currently supported by netvsc, so remove this flag for now. Otherwise, it will be unconditionally enabled by commit ec5f0615642 "Kill link between CSUM and SG features" Previously, the SG feature is disabled because CSUM is not set here. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17Fix the VLAN_TAG_PRESENT in netvsc_recv_callback()Haiyang Zhang
We should call __vlan_hwaccel_put_tag() only if the packet comes from vlan, otherwise VLAN_TAG_PRESENT will always be added. Reported-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31hyperv: Fix vlan_proto setting in netvsc_recv_callback()Haiyang Zhang
Since the recent addition of 8021AD, we need to set the new field vlan_proto in sk_buff. Otherwise, it will trigger BUG() call in vlan_proto_idx(). This patch fixes the problem. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29hyperv: Fix a compiler warning in netvsc_send()Haiyang Zhang
Fixed: warning: cast from pointer to integer of different size The Hyper-V hosts always use 64 bit request id. The guests can have 32 or 64 bit pointers which equal to the ulong type size. So we cast it to ulong type. And, assigning 32bit integer to 64 bit variable works fine. The VMBus returns the same id in the completion packet. But the value has no effect on the host side. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c drivers/net/ethernet/intel/igb/igb_main.c drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c include/net/scm.h net/batman-adv/routing.c net/ipv4/tcp_input.c The e{uid,gid} --> {uid,gid} credentials fix conflicted with the cleanup in net-next to now pass cred structs around. The be2net driver had a bug fix in 'net' that overlapped with the VLAN interface changes by Patrick McHardy in net-next. An IGB conflict existed because in 'net' the build_skb() support was reverted, and in 'net-next' there was a comment style fix within that code. Several batman-adv conflicts were resolved by making sure that all calls to batadv_is_my_mac() are changed to have a new bat_priv first argument. Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO rewrite in 'net-next', mostly overlapping changes. Thanks to Stephen Rothwell and Antonio Quartulli for help with several of these merge resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08hyperv: Fix RNDIS send_completion code pathHaiyang Zhang
In some cases, the VM_PKT_COMP message can arrive later than RNDIS completion message, which will free the packet memory. This may cause panic due to access to freed memory in netvsc_send_completion(). This patch fixes this problem by removing rndis_filter_send_request_completion() from the code path. The function was a no-op. Reported-by: Long Li <longli@microsoft.com> Tested-by: Long Li <longli@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08hyperv: Fix a kernel warning from netvsc_linkstatus_callback()Haiyang Zhang
The warning about local_bh_enable inside IRQ happens when disconnecting a virtual NIC. The reason for the warning is -- netif_tx_disable() is called when the NIC is disconnected. And it's called within irq context. netif_tx_disable() calls local_bh_enable() which displays warning if in irq. The fix is to remove the unnecessary netif_tx_disable & wake_queue() in the netvsc_linkstatus_callback(). Reported-by: Richard Genoud <richard.genoud@gmail.com> Tested-by: Long Li <longli@microsoft.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-21Merge tag 'char-misc-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg Kroah-Hartman: "Here's the big char/misc driver patches for 3.9-rc1. Nothing major here, just lots of different driver updates (mei, hyperv, ipack, extcon, vmci, etc.). All of these have been in the linux-next tree for a while." * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits) w1: w1_therm: Add force-pullup option for "broken" sensors w1: ds2482: Added 1-Wire pull-up support to the driver vme: add missing put_device() after device_register() fails extcon: max8997: Use workqueue to check cable state after completing boot of platform extcon: max8997: Set default UART/USB path on probe extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type extcon: max8997: Set default of ADC debounce time during initialization extcon: max8997: Remove duplicate code related to set H/W line path extcon: max8997: Move defined constant to header file extcon: max77693: Make max77693_extcon_cable static extcon: max8997: Remove unreachable code extcon: max8997: Make max8997_extcon_cable static extcon: max77693: Remove unnecessary goto statement to improve readability extcon: max77693: Convert to devm_input_allocate_device() extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style CREDITS: update email and address of Harald Hoyer extcon: arizona: Use MICDET for final microphone identification extcon: arizona: Always take the first HPDET reading as the final one extcon: arizona: Clear _trig_sts bits after jack detection extcon: arizona: Don't HPDET magic when headphones are enabled ...
2013-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Bring in the 'net' tree so that we can get some ipv4/ipv6 bug fixes that some net-next work will build upon. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-25Drivers: net: hyperv: Use the consolidated GUID definitionK. Y. Srinivasan
Use the consolidated GUID definitions in the Hyper-V network driver. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-19net/hyperv: fix wrong length of mac addressJianjun Kong
This patch fixed wrong mac length, it should be ETH_ALEN, also replaced the hardcode 6 in hyperv_net.h Signed-off-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06ethtool: fix drvinfo strings set in driversJiri Pirko
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30hyperv: Add an error message to rndis_filter_set_device_mac()Haiyang Zhang
This message indicates an error returned from the host when changing MAC address. Reported-by: Michal Kubecek <mkubecek@suse.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21hyperv: Remove unnecessary comments in rndis_filter_receive_data()Haiyang Zhang
Checked with Windows networking team, there is only one RNDIS message in each netvsc packet. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02hyperv: Add buffer for extended info after the RNDIS response message.Haiyang Zhang
In some response messages, there may be some extended info after the message. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02hyperv: Report actual status in receive completion packetHaiyang Zhang
The existing code always reports NVSP_STAT_SUCCESS. This patch adds the mechanism to report failure when it happens. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02hyperv: Remove extra allocated space for recv_pkt_list elementsHaiyang Zhang
The receive code path doesn't use the page buffer, so remove the extra allocated space here. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02hyperv: Fix page buffer handling in rndis_filter_send_request()Haiyang Zhang
To prevent possible data corruption in RNDIS requests, add another page buffer if the request message crossed page boundary. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02hyperv: Fix the missing return value in rndis_filter_set_packet_filter()Haiyang Zhang
Return ETIMEDOUT when the reply message is not received in time. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02hyperv: Fix the max_xfer_size in RNDIS initializationHaiyang Zhang
According to RNDIS specs, Windows sets this size to 0x4000. I use the same value here. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: move and rename netif_notify_peers()Amerigo Wang
I believe net/core/dev.c is a better place for netif_notify_peers(), because other net event notify functions also stay in this file. And rename it to netdev_notify_peers(). Cc: David S. Miller <davem@davemloft.net> Cc: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09hyperv: Add comments for the extended buffer after RNDIS messageHaiyang Zhang
Reported-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03hyperv: Move wait completion msg code into rndis_filter_halt_device()Haiyang Zhang
We need to wait for send_completion msg before put_rndis_request() at the end of rndis_filter_halt_device(). Otherwise, netvsc_send_completion() may reference freed memory which is overwritten, and cause panic. Reported-by: Long Li <longli@microsoft.com> Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-25hyperv: Add error handling to rndis_filter_device_add()Haiyang Zhang
Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-25hyperv: Add a check for ring_size valueHaiyang Zhang
It prevents ring_size being set to a too small value. Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-16hyperv: Add support for setting MAC from within guestsHaiyang Zhang
This adds support for setting synthetic NIC MAC address from within Linux guests. Before using this feature, the option "spoofing of MAC address" should be enabled at the Hyper-V manager / Settings of the synthetic NIC. Thanks to Kin Cho <kcho@infoblox.com> for the initial implementation and tests. And, thanks to Long Li <longli@microsoft.com> for the debugging works. Reported-and-tested-by: Kin Cho <kcho@infoblox.com> Reported-by: Long Li <longli@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-06-06drivers: net: Remove casts to same typeJoe Perches
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-04net/hyperv: Use wait_event on outstanding sends during device removalHaiyang Zhang
Change the busy-waiting/udelay to wait_event on outstanding sends. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12usb/net: rndis: merge command codesLinus Walleij
Switch the hyperv filter and rndis gadget driver to use the same command enumerators as the other drivers and delete the surplus command codes. Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12usb/net: rndis: remove ambigous status codesLinus Walleij
The RNDIS status codes are redefined with much stranged ifdeffery and only one of these codes was used in the hyperv driver, and there it is very clearly referring to the RNDIS variant, not some other status. So clarify this by explictly using the RNDIS_* prefixed status code in the hyperv drivera and delete the duplicate defines. Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12usb/net: rndis: break out <linux/rndis.h> definesLinus Walleij
As a first step to consolidate the RNDIS implementations, break out a common file with all the #defines and move it to <linux/rndis.h>. This also deletes the immediate duplicated defines in the <linux/rndis.h> file that yields a lot of compilation warnings. Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Fix merge between commit 3adadc08cc1e ("net ax25: Reorder ax25_exit to remove races") and commit 0ca7a4c87d27 ("net ax25: Simplify and cleanup the ax25 sysctl handling") The former moved around the sysctl register/unregister calls, the later simply removed them. With help from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21net/hyperv: Adding cancellation to ensure rndis filter is closedWenqi Ma
Although the network interface is down, the RX packets number which could be observed by ifconfig may keep on increasing. This is because the WORK scheduled in netvsc_set_multicast_list() may be executed after netvsc_close(). That means the rndis filter may be re-enabled by do_set_multicast() even if it was closed by netvsc_close(). By canceling possible WORK before close the rndis filter, the issue could be never happened. Signed-off-by: Wenqi Ma <wenqi_ma@trendmicro.com.cn> Reviewed-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-03net/hyperv: Add flow control based on hi/low watermarkHaiyang Zhang
In the existing code, we only stop queue when the ringbuffer is full, so the current packet has to be dropped or retried from upper layer. This patch stops the tx queue when available ringbuffer is below the low watermark. So the ringbuffer still has small amount of space available for the current packet. This will reduce the overhead of retries on sending. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19net/hyperv: Fix the code handling tx busyHaiyang Zhang
Instead of dropping the packet, we keep the skb buffer, and return NETDEV_TX_BUSY to let upper layer retry send. This will not cause endless loop, because the host is taking data away from ring buffer, and we have called the stop_queue before returning NETDEV_TX_BUSY. The stop_queue was called in the function netvsc_send() in file netvsc.c, then it returns to rndis_filter_send(), which returns to netvsc_start_xmit() in file netvsc_drv.c. So the NETDEV_TX_BUSY is indeed returned AFTER queue is stopped. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-03-16net/hyperv: fix erroneous NETDEV_TX_BUSY useEric Dumazet
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. This is mostly a revert of commit bf769375c (staging: hv: fix the return status of netvsc_start_xmit()) In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12net/hyperv: Add support for vlan trunking from guestsHaiyang Zhang
With this feature, a Linux guest can now configure multiple vlans through a single synthetic NIC on Win8 Hyper-V host. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12net/hyperv: Fix data corruption in rndis_filter_receive()Haiyang Zhang
Limiting the memcpy to be the sizeof(struct rndis_message) can truncate the message if there are Per-Packet-Info or Out-of-Band data. In my earlier patch (commit 45326342), the unnecessary kmap_atomic and kunmap_atomic surrounding this memcpy have been removed because the memory in the receive buffer is always mapped. This memcpy is not necessary either. To fix the bug, I removed the memcpy. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-03-08net/hyperv: Use the built-in macro KBUILD_MODNAME for this driverHaiyang Zhang
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: Olaf Hering <olaf@aepfle.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05net/hyperv: Remove the unnecessary memset in rndis_filter_send()Haiyang Zhang
The memory has been allocated by kzalloc, so it's unnecessary to memset again. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05net/hyperv: Correct the assignment in netvsc_recv_callback()Haiyang Zhang
The first assignment to variable "net" is wrong, but overridden by the latter assignments. So the bug isn't manifested. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05net/hyperv: Convert camel cased variables in rndis_filter.c to lower casesHaiyang Zhang
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-02net/hyperv: Fix the page buffer when an RNDIS message goes beyond page boundaryHaiyang Zhang
There is a possible data corruption if an RNDIS message goes beyond page boundary in the sending code path. This patch fixes the problem. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-26 19:45:12 +0000