summaryrefslogtreecommitdiffstats
path: root/drivers/net/netxen
AgeCommit message (Collapse)Author
2009-10-17netxen; update version to 4.0.62Dhananjay Phadke
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-17netxen: sysfs control for auto firmware recoveryNarender Kumar
Firmware hang detection and recovery (reset) need to be disabled for diagnostic tools, which can run some disruptive tests. This adds a driver level control to turn off this feature by diag tools. Signed-off-by: Narender Kumar <narender.kumar@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-17netxen: fix error codes in for tools accessDhananjay Phadke
Use -EIO or -EINVAL as error codes, these can get passed up to applications (tools). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-17netxen: onchip memory access changeAmit Kumar Salecha
Add support for different windowing scheme for on chip memory in future chip revisions. This is required by diagnostic tools. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-17netxen: reset sequence changesAmit Kumar Salecha
Future revisions need different chip reset sequence and firmware initialization. Also clean up some never used debug code. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-17netxen: 128 memory controller supportAmit Kumar Salecha
Future revisions of the chip have 128 bit memory transactions. Require drivers to implement rmw in case of sub-128 bit accesses by driver. This is mostly used by diagnostic tools. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-17netxen: defines for next revisionAmit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-13netxen: add sysfs entries for diag toolsDhananjay Phadke
Add sysfs entries to enable register and memory access for diagnostic tools. Signed-off-by: Narender Kumar <narender.kumar@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13netxen: separate register and memory access lockDhananjay Phadke
Since register and onboard memory access has separate window registers, they need not be kept under same lock. Also, memory is always accessed from process context (mostly for firmware init and diagnostic tools). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13netxen: annotate register windowing codeDhananjay Phadke
Use common variables crb_win, ocm_win for all revisions of chip. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13netxen: add access to on chip memory for toolsDhananjay Phadke
Add access to on chip memory, this is used by debug and diagnostic tools only. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13netxen: remove sub 64-bit mem accessesAmit Kumar Salecha
Sub 64-bit / unaligned access to oncard memory was only used by old diagnostic tools, causes some intermittent issues when memory controller agent is used. The new access method was added by commit ea6828b8aa3a8ebae8d7740f32f212ba1d2f0742 ("netxen: improve pci memory access"). Firmware init anyway uses 8-byte strides. This also fixes address/offset calculation for NX2031 context memory (SIU). For NX3031, SIU uses same register offsets as packet memory (MIU). Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13netxen: fix pci bar mappingDhananjay Phadke
Use resource_size_t for PCI resource remapping instead of unsigned long. Physical addresses can exceed range of long data type (e.g with PAE). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-07netxen: Use the instance of net_device_stats from net_device.Ajit Khaparde
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07netxen: Fix Unlikely(x) > yRoel Kluin
The closing parenthesis was not on the right location. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22netxen: fix firmware init after resumeDhananjay Phadke
After successful firmware init, return instead of falling to error path (leading to detach) after resuming to D0 state. This was broken in recent firmware reset rehaul. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22netxen: fix minor tx timeout bugDhananjay Phadke
Fix minor bug in netdev tx timeout handling which could always lead to firmware reset instead of pci function reset. netxen_nic_reset_context() requires __NX_RESETTING bit cleared. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: update copyrightDhananjay Phadke
o Add QLogic copyright, add linux-driver@qlogic.com to MAINTAINERS. o Delete old contact information. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: fix tx timeout recoveryAmit Kumar Salecha
Redesign tx timeout handling in line with new firmware reset design that co-ordinates with other PCI function drivers. o For NX3031, first try to reset PCI function's own context before requesting firmware reset. o For NX2031, since firmware heartbit is not supported directly request firmware reset. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: fix file firmware leakDhananjay Phadke
Release file firmware when no firmware reset is required. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: improve pci memory accessDhananjay Phadke
o Access on card memory through memory controller (agent) rather than moving small pci window around. Clean up the code for moving windows around. o Restrict memory accesss to 64 bit, currently only firmware download uses this. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: change firmware write sizeAmit Kumar Salecha
Use 8 byte strides for firmware download into card memory since oncard memory controller needs 8 byte (64 bit) accesses. This avoids unnecessary rmw cycles. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: build fix for INET=nRandy Dunlap
When CONFIG_INET is disabled, netxen has a build failure: netxen_nic_main.c:(.text+0x118fd1): undefined reference to `netxen_config_indev_addr' so make that function just an empty stub when CONFIG_INET=n. (not "inline" since that conflicts with other declarations of it) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09netxen: fix tx descriptor structureAmit Kumar Salecha
Fix the offset of vlan_TCI field in cmd_desc_type0. Signed-off-by: Amit Kumar Salecha <amit@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09netxen: fix check for ip addr hashing supportAmit Kumar Salecha
Fix typo in checking dest ip has support before programming destip addresses. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07netxen: update version to 4.0.50Dhananjay Phadke
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07netxen: refactor firmware info codeDhananjay Phadke
o Combine netxen_get_firmware_info(), netxen_check_options() so that they are updated every time firmware is reset. o Set dma mask everytime firmware is reset. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07netxen: pre calculate register addressesAmit Kumar Salecha
For registers accessed in fast path (interrupt / softirq) avoid expensive I/O address translation. These registers are directly mapped in PCI bar 0 and do not require any window checks. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07netxen: fix ip addr hashing after firmware resetAmit Kumar Salecha
Reprogram local IP addresses after firmware is reset or after resuming from suspend. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07netxen: firmware hang detectionDhananjay Phadke
Implement state machine to detect firmware hung state and recover. Since firmware will be shared by all PCI functions that have different class drivers (NIC or FCOE or iSCSI), explicit hardware based serialization is required for initializing firmware. o Used global scratchpad register to maintain device reference count. Every probed pci function adds to ref count. o Implement timer (delayed work) for each pci func that checks firmware heartbit every 5 sec and detaches itself if firmware is dead. Last detaching function reloads firmware. Other functions wait for firmware init, and re-attach themselves. Heartbit is not supported by NX2031 firmware. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07netxen: handle firmware load errorsDhananjay Phadke
Unwind allocations and release file firmware when when firmware load fails. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03netxen: fix infinite loop on dma mapping failureDhananjay Phadke
Fix a perpetual while() loop in unwinding partial mapped tx skb on dma mapping failure. Reported-by: "Juha Leppanen" <juha_motorsportcom@luukku.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03netxen: remove duplicate napi_addDhananjay Phadke
Remove duplicate calls to netxen_napi_add(). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03netxen: fix lro buffer allocationDhananjay Phadke
Alloc 12k skbuffs so that firmware can aggregate more packets into one buffer. This doesn't raise memory consumption since 9k skbs use 16k slab cache anyway. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02netdev: drivers should make ethtool_ops constStephen Hemminger
No need to put ethtool_ops in data, they should be const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert bulk of drivers to netdev_tx_tStephen Hemminger
In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26netxen: bridged mode optimizationsNarender Kumar
When the interface is put in bridged mode, destination mac addresses are unknown to firmware. So packets take a slow path (lower priority) in firmware reducing performance. Firmware can cache limited number of remote unicast mac addresses for certain interval, if "dynamic mac learning" mode is enabled. Driver needs to enable this "mac learning" mode in firmware. Currently this is done through net device class sysfs entry, possibly this can also be done upon netlink notifications to from bridge. Signed-off-by: Narender Kumar <narender.kumar@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26netxen: remove netxen_nic_niu.cDhananjay Phadke
Consolidate all MAC/PHY access functions into netxen_nic_hw.c Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26netxen: implement generic pcie semaphore functionsDhananjay Phadke
Implement common function for locking/unlocking 8 hardware semaphores used for serializing access to shared resouces on a NIC board by different PCI functions. As by definition, callers of these semaphore API can be put to sleep till the semaphore is locked. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26netxen: remove unused codeDhananjay Phadke
Remove code for phy access on unreleased NX2031 based quad-gig board. NX3031 based production quad-gig boards do not require direct phy access by driver. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23netxen: remove netxen_nic_phan_reg.hDhananjay Phadke
Consolidate register definitions in netxen_nic_hdr.h Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23netxen: implement pci driver shutdownAmit Kumar Salecha
Implement pci driver shutdown functionality, this helps quiescing all PCI transaction before chipset is reset. Amit Kumar Salecha <amit@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23netxen: refactor tx dma mapping codeDhananjay Phadke
Move all tx skb mapping code into netxen_map_tx_skb(). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23netxen: fix firmware reset logicDhananjay Phadke
If netxen_need_fw_reset() return 0 [ implies firmware is up and running], still go through dma mask check, etc. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23netxen: ethtool statistics and control for LRONarender Kumar
Add ethtool -K knob to control LRO in firmware. LRO path is completely separated from GRO, LRO packets are still fed with netif_receive_skb(). Also fix ethtool statistics to include LRO packets. Also use correct message type while configuring interrupt coalescing. Signed-off-by: Narender Kumar <narender.kumar@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/netxen/netxen_nic_main.c
2009-08-13netxen: free napi resources during detachDhananjay Phadke
o Defer napi resouce allocation to device attach. o Free napi resources and delete napi during detach. This ensures right behavior across firmware reset. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13netxen: remove netxen workqueueAmit Kumar Salecha
o Remove private workqueue in the driver, move all scheduled tasks to keventd workqueues. This makes ports (interfaces) of same / different NIC boards independent, in terms of their link watchdog and reset tasks. o Move quick checks for link status and temperature in timer callback, schedule watchdog task only if link status changed or temperature reached critical threshold. This also fixes deadlock when thermal panic occurs, watchdog work was flushing workqueue that it was sitting on. Signed-off-by: Amit Kumar Salecha <amit@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-02 13:32:09 +0000