summaryrefslogtreecommitdiffstats
path: root/drivers/net/qlcnic/qlcnic_ethtool.c
AgeCommit message (Collapse)Author
2011-01-10qlcnic: fix ethtool diagnostics testSony Chacko
IRQ diag test was getting executed only when both register test and link test passed. The test should get executed if ETH_TEST_FL_OFFLINE flag is set. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17qlcnic: fix LED test when interface is down.Sucheta Chakraborty
When interface is down, create temporary context to config LED. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03qlcnic: LICENSE file for qlcnicSritej Velaga
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03qlcnic: Disable loopback supportSucheta Chakraborty
Loopback mode can not be supported in CNA mode. Removing it until FW is fixed. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: lro off message log from set rx checsumSony Chacko
Log LRO off message while disabling rx checksum only when LRO is already enabled. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27qlcnic: reduce rx ring sizeSony Chacko
If eswitch is enabled, rcv ring size can be reduce, as physical port is partition-ed. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18qlcnic: update ethtool statsamit salecha
Added statistics for Nic Partition supported adapter. These statistics are maintined in device. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: change all P3 references to P3PSritej Velaga
This patch just rename all P3 #define to P3P. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: remove private LRO flagAmit Kumar Salecha
LRO was not getting enable after interface down/up. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: support quiescent modeAmit Kumar Salecha
Put device in quiescent mode during internal loopback test. Before running test, set state to NEED_QUISCENT. After getting ack from all function, change state to QUISCENT and perform test. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04qlcnic: fix diag registerAmit Kumar Salecha
regs_buff[i] and diag_registers[j] array should use different index variable. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04qlcnic: fix internal loopback testAmit Kumar Salecha
o Loop 10 times with delay of 1 ms to rcv packet. o Print garbage packet. o Try send/receive MAX(16) packet, instead of exit from test, if a packet is not received. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01qlcnic: add api version in reg dumpRajesh Borundia
o ethtool reg version bumped to 2 Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25qlcnic: change reg nameAmit Kumar Salecha
Change QLCNIC_CRB_DEV_REF_COUNT to QLCNIC_CRB_DRV_ACTIVE to match document. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: configure offload setting on eswitchRajesh Borundia
Device is not capable of enabling/disabling offload setting per port in case of Nic Partition.So offload settings needs to be enabled/disabled per eswitch and it will affect all the function on that eswitch. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17qlcnic: turn off lro when rxcsum is disabled.Sucheta Chakraborty
o Also dont allow lro to be turn on, if rx csum is disabled Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17qlcnic: fix link diag testSony Chacko
o Give sufficient time for all makes of PHY modules to establish the link after loopback test. o Perform online test before offline test. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25qlcnic: fix loopback testAmit Kumar Salecha
o Loopback not supported for virtual function. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-14qlcnic: fix pause params settingRajesh Borundia
Turning off rx pause param and autoneg param is not supported so return error in that case. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09qlcnic: Check FW capability for TSOAnirban Chakraborty
Driver checks TSO capability from FW before enabling it. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30netdev: Make ethtool_ops::set_flags() return -EINVAL for unsupported flagsBen Hutchings
The documented error code for attempts to set unsupported flags (or to clear flags that cannot be disabled) is EINVAL, not EOPNOTSUPP. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29qlcnic: fail when try to setup unsupported featuresStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: release device resources during interface downAmit Kumar Salecha
Previously we were allocating device resources during probe and release them during remove. Now alloc during interface up and release in interface down. This helps in device performance, as it doesn't need to keep track of inactive resources. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: cleanup skb allocationAmit Kumar Salecha
No need to maintian separate state for alloced and freed skb. This can be done by null check. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02qlcnic: NIC Partitioning - Add basic infrastructure supportAnirban Chakraborty
Following changes have been added to enable the adapter to work in NIC partitioning mode where multiple PCI functions of an adapter port can be configured to work as NIC functions. The first function that is enumerated on the PCI bus assumes the role of management function which, besides being able to do all the NIC functionality, can configure other NIC partitions. Other NIC functions can be configured as privileged or non privileged functions. Privileged function can not configure other NIC functions but can do all the NIC functionality including any firmware initialization, chip reset etc. Non privileged functions can do only basic IO. For chip reset etc, it depends on the privilege or management function. 1. Added code to determine PCI function number independent of kernel API. 2. Added Driver - FW version 2.0 support. 3. Changed producer and consumer register offset calculation. 4. Added management and privileged operation modes for npar functions. A module parameter has been added to control it. 5. Added support for configuring the eswitch in the adapter. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14qlcnic: cleanup unused codeAmit Kumar Salecha
LRO ring, cut-thru mode and specific fw version are not valid to Qlogic CNA device. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14qlcnic: remove obsolete registerAmit Kumar Salecha
MSI_MODE, CAPABILITIES_FW and SCRATCHPAD registers are obsolete. Driver should not use them. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: additional driver statisticsAmit Kumar Salecha
Added additional driver statistics to track errors in rcv/tx path. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03qlcnic: add driver debug supportAmit Kumar Salecha
Add debug print in driver, can be tuned by ethtool msg level callback. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: additional driver statistics.Sucheta Chakraborty
Statistics added for lro/lso bytes, count for tx stop queue and wake queue and skb alloc failure count. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: fix tx csum statusSucheta Chakraborty
Kernel default tx csum function (ethtool_op_get_tx_csum) doesn't show correct csum status. It takes various FLAGS (NETIF_F_ALL_CSUM) in account to show tx csum status, which driver doesn't set while disabling tx csum. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: add loopback diagnostic testAmit Kumar Salecha
Loopback test (offline) added in ethtool self test. o Set device in loopback mode o Send packets o Process receive packets in qlcnic_process_rcv_ring_diag() o Compare packets o Reset device in normal mode. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: add interrupt diagnostic testAmit Kumar Salecha
Interrupt test (offline) added in ethtool self test. Register a temporary interrupt handler and then send command to fw to raise an interrupt. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: support LED blink for device identificationSucheta Chakraborty
Added support of device identification by blinking LED for specified time. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: protect resoruce cleanup by rtnl lockAmit Kumar Salecha
o context resources can be in used, while resoruce cleanup is in progress, during fw recover. o Null pointer execption can occur in send_cmd_desc, if fw recovery module frees tx ring without rtnl lock. o Same applies to ethtool register dump and FW health registers should be dump in any case. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16qlcnic: Qlogic ethernet driver for CNA devicesAmit Kumar Salecha
o 1G/10G Ethernet Driver for Qlgic QLE8240 and QLE8242 CNA devices. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-19 17:21:55 +0000