summaryrefslogtreecommitdiffstats
path: root/drivers/net/sis900.c
AgeCommit message (Collapse)Author
2007-07-10sis900_mii_probe() must be __devinitAdrian Bunk
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x298170): Section mismatch: reference to .init.text:sis900_mii_probe (between 'sis900_probe' and 'sis900_default_phy') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-27sis900: Allocate rx replacement buffer before rx operationNeil Horman
Just found a hole in my last patch. It was reported to me that shortly after we integrated this patch. The report was of an oops that took place inside of netif_rx when using the sis900 driver. Looking at my origional patch I noted that there was a spot between the new skb_alloc and the refill_rx_ring label where skb got reassigned to the pointer currently held in the rx_ring for the purposes of receiveing the frame. The result of this is however that the buffer that gets passed to netif_rx (if it is called), then gets placed right back into the rx_ring. So if you receive frames fast enough the skb being processed by the network stack can get corrupted. The reporter is testing out the fix I've written for this below (I'm not near my hardware at the moment to test myself), but I wanted to post it for review ASAP. I'll post test results when I hear them, but I think this is a pretty straightforward fix. It just uses a separate pointer to do the rx operation, so that we don't improperly reassign the pointer that we use to refill the rx ring. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24sis900: Allocate rx replacement buffer before rx operationNeil Horman
The sis900 driver appears to have a bug in which the receive routine passes the skbuff holding the received frame to the network stack before refilling the buffer in the rx ring. If a new skbuff cannot be allocated, the driver simply leaves a hole in the rx ring, which causes the driver to stop receiving frames and become non-recoverable without an rmmod/insmod according to reporters. This patch reverses that order, attempting to allocate a replacement buffer first, and receiving the new frame only if one can be allocated. If no skbuff can be allocated, the current skbuf in the rx ring is recycled, dropping the current frame, but keeping the NIC operational. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06sis900 warning fixesAndrew Morton
drivers/net/sis900.c: In function 'sis900_reset_phy': drivers/net/sis900.c:972: warning: 'status' may be used uninitialized in this function drivers/net/sis900.c: In function 'sis900_check_mode': drivers/net/sis900.c:1431: warning: 'status' may be used uninitialized in this function drivers/net/sis900.c: In function 'sis900_timer': drivers/net/sis900.c:1467: warning: 'status' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-13drivers/net: const-ify ethtool_ops declarationsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13drivers/net: Trim trailing whitespaceJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19drivers/net: Remove deprecated use of pci_module_init()Jeff Garzik
From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14[PATCH] Add new PHY to sis900 supported listDaniele Venzano
Please include the attached patch that adds support for a new PHY to the sis900 driver. See also Bugzilla 6919. Signed-off-by: Daniele Venzano <venza@brownhat.org> -- Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-02[PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-20Merge branch 'master' into upstreamJeff Garzik
2006-05-10sis900: phy for FoxCon motherboardJames Cameron
661FX7MI-S motherboard which uses the SiS 661FX chipset. The patch adds an entry to mii_chip_info for the transceiver. The PHY ids were found using the sis900_c_122.diff patch from http://brownhat.org/sis900.html but that patch didn't solve the problem, because the PHY at address 1 was already being chosen. Without my patch, when bursts of packets arrive from other hosts on a LAN, the interface dropped one roughly 10% of the time, causing retransmits. There were fifth second pauses in refresh of large xterms, and it made Netrek suck. I can provide further test data. Workaround in lieu of patch is to use mii-tool to advertise 100baseTx-HD, then force renegotiation. I wasn't able to identify the actual transceiver, so the description field is a guess. This patch is similar to Artur Skawina's patch: http://marc.theaimsgroup.com/?l=linux-netdev&m=114297516729079&w=2 I'm not sure, but I wonder if it means the default behaviour should be changed, so as to better handle future transceivers. Diff is against 2.6.16.13. Signed-off-by: James Cameron <james.cameron@hp.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-04-20[PATCH] Add VLAN (802.1q) support to sis900 driverDaniele Venzano
The attached patch adds support for VLANs to the sis900 driver and bumps the version number. It is based on an old (2003) patch for the 2.4 series by Hamid Hashemi Golpayegani. It applies on top of 2.6.16(.5). I have one report that it works and behaves as intended. Please review and consider for inclusion. Signed-off-by: Daniele Venzano <venza@brownhat.org> -- Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28[PATCH] Typo fixesAlexey Dobriyan
Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] more s/fucn/func/ typo fixesAkinobu Mita
s/fucntion/function/ typo fixes Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] sis900 adm7001 PHY supportArtur Skawina
this patch is required to get a SIS964 based motherboard ethernet working (FSC D1875) (picking the #1 transceiver, instead of the last one, in case no known ones were found might be a better default, and would have worked in this case too) Signed-off-by: Artur Skawina <art_k@o2.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03Massive net driver const-ification.Arjan van de Ven
2006-02-25Fix Wake on LAN support in sis900Daniele Venzano
Fix two bugs in the WoL implementation of sis900. The first causes hangs on some system on driver load, the second causes troubles when disabling WoL support. Both fixes are one liner and really simple. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Daniele Venzano <venza@brownhat.org>
2005-10-28[PATCH] Add Wake on LAN support to sis900 (2)Daniele Venzano
Sorry, but that day I had smoked somthing too heavy for me, the patch didn't apply. Here's a new one. The patch availble below adds support for Wake on LAN to the sis900 driver. Some register addresses were added to sis900.h and two new functions were implemented in sis900.c. WoL status is controlled by ethtool. Patch is against 2.6.13. Comments are welcome, but also consider for inclusion in the -mm series. Signed-off-by: Daniele Venzano <venza@brownhat.org> -- Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-28sis900: come alive after temporary memory shortageVasily Averin
1) Forgotten counter incrementation in sis900_rx() in case it doesn't get memory for skb, that leads to whole interface failure. Problem is accompanied with messages: eth0: Memory squeeze,deferring packet. eth0: NULL pointer encountered in Rx ring, skipping 2) If counter cur_rx overflows and there'll be temporary memory problems buffer can't be recreated later, when memory IS available. 3) Limit the work in handler to prevent the endless packets processing if new packets are generated faster then handled. Signed-off-by: Konstantin Khorenko <khorenko@sw.ru> Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-28[NET]: Remove gratuitous use of skb->tail in network drivers.David S. Miller
Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-26[PATCH] net/sis900: Use the DMA_32BIT_MASK constantTobias Klauser
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() instead of custom macros. This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
2005-05-12 [PATCH] More ethtool support for sis900 and warning fixDaniele Venzano
Add support to sis900 for the following ethtool ops: - get_link - get_settings - set_settings - nway_reset Signed-off-by: Daniele Venzano <webvenza@libero.it> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!