summaryrefslogtreecommitdiffstats
path: root/drivers/net/tulip
AgeCommit message (Collapse)Author
2008-05-06uli526x: fix endianness issues in the setup frameAnton Vorontsov
This patch fixes uli526x driver's issues on a PowerPC boards: uli chip is unable to receive the packets. It appears that send_frame_filter prepares the setup frame in the endianness unsafe manner. On a big endian machines we should shift the address nibble by two bytes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06uli526x: initialize the hardware prior to requesting interruptsAnton Vorontsov
The firmware on MPC8610HPCD boards enables ULI ethernet and leaves it in some funky state before booting Linux. For drivers, it's always good idea to (re)initialize the hardware prior to requesting interrupts. This patch fixes the following oops: Oops: Kernel access of bad area, sig: 11 [#1] MPC86xx HPCD NIP: c0172820 LR: c017287c CTR: 00000000 [...] NIP [c0172820] allocate_rx_buffer+0x2c/0xb0 LR [c017287c] allocate_rx_buffer+0x88/0xb0 Call Trace: [df82bdc0] [c017287c] allocate_rx_buffer+0x88/0xb0 (unreliable) [df82bde0] [c0173000] uli526x_interrupt+0xe4/0x49c [df82be20] [c0045418] request_irq+0xf0/0x114 [df82be50] [c01737b0] uli526x_open+0x48/0x160 [df82be70] [c0201184] dev_open+0xb0/0xe8 [df82be80] [c0200104] dev_change_flags+0x90/0x1bc [df82bea0] [c035fab0] ip_auto_config+0x214/0xef4 [df82bf60] [c03421c8] kernel_init+0xc4/0x2ac [df82bff0] [c0010834] kernel_thread+0x44/0x60 Instruction dump: 4e800020 9421ffe0 7c0802a6 bfa10014 7c7e1b78 90010024 80030060 83e30054 2b80002f 419d0078 3fa0c039 48000058 <907f0010> 80630088 2f830000 419e0014 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29net: use get/put_unaligned_* helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-16[netdrvr] tulip: Better MWI workaround for 21143 rev 65 chip errataPeter Horton
This patch works around the MWI bug on the DC21143 rev 65 Tulip by ensuring that the receive buffers don't end on a cache line boundary (as documented in the errata). This patch is required for the MIPS based Cobalt Qube/RaQ as supporting the extra PCI commands seems to reduce the chance of a hard lockup between the Tulip and the PCI bridge. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16[netdrvr] tulip/winbond-840: don't let tulip.h symbol stomp oursJeff Garzik
winbond-840 shares tulip.h with the tulip driver, because they share many (but not all) of the same register definitions. This is useful for the register definitions, but not helpful when it comes to symbols that are shared among the tulip driver's C modules, but not meant to be shared outside that one driver. Thus, PKT_BUF_SZ is a symbol internal to tulip, but it was intruding upon a similar symbol in winbond-840's namespace. This was not a problem as long as the two symbols had the same value, but upcoming patches result in differing symbol values. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-02Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/s2io.c
2008-03-28[netdrvr] tulip_read_eeprom fixes for BUG 4420Grant Grundler
If "location" is > "addr_len" bits, the high bits of location would interfere with the READ_CMD sent to the eeprom controller. A patch was submitted to bug: http://bugzilla.kernel.org/show_bug.cgi?id=4420 which simply truncated the "location", read whatever was in "location modulo addr_len", and returned that value. That avoids confusing the eeprom but seems like the wrong solution to me. Correct would be to not read beyond "1 << addr_len" address of the eeprom. I am submitting two changes to implement this: 1) tulip_read_eeprom will return zero (since we can't return -EINVAL) if this is attempted (defensive programming). 2) In tulip_core.c, fix the tulip_read_eeprom caller so they don't iterate past addr_len bits and make sure the entire tp->eeprom[] array is cleared. I konw we don't strictly need both. I would prefer both in the tree since it documents the issue and provides a second "defense" from the bug from creeping back in. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-22Merge branch 'upstream-net26' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 Conflicts: drivers/s390/net/qeth_main.c
2008-03-172.6.25-rc4 de_stop_rxtx polling wrongGrant Grundler
This untested patch _should_ fix: "(net de2104x) Kernel panic with de2104x tulip driver on boot" http://bugzilla.kernel.org/show_bug.cgi?id=3156 But the bug submitter isn't responding. Same fix has been applied to tulip.c (several years ago) and uli526x.c (Feb 2008) drivers. [ The panic reported in the bug report was removed in a recently (march 2008) accepted patch from Ondrej Zary. ] Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17remove the obsolete xircom_tulip_cb driverAdrian Bunk
The xircom_tulip_cb driver has been replaced the xircom_cb driver, and since it depended on BROKEN_ON_SMP it e.g. was no longer present in many distribution kernels. This patch therefore removes it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-05de2104x: remove BUG_ON() when changing media typeOndrej Zary
When the chip dies (probably because of a bug somewhere in the driver), de_stop_rxtx() fails and changing the media type crashes the whole machine. Replace BUG_ON() in de_set_media() with a warning. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23uli526x partially recognizing interfaceGrant Grundler
Patch fixes: http://bugzilla.kernel.org/show_bug.cgi?id=5839 Init sequence needs to poll phy until phy reset is complete. This is the same problem that I fixed in 2002 in tulip driver. Thanks to manty@manty.net for testing this patch. Thanks to Pozsar Balazs <pozsy@uhulinux.hu> for posting/testing a similar patch before: http://lkml.org/lkml/2006/8/21/45 Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05xircom_cb should return NETDEV_TX_BUSY when no descriptors availableErik Mouw
Changes in other networking paths uncovered a bug in the xircom_cb driver which made the kernel spew lots of the following error messages: BUG eth1 code -5 qlen 0 It turned out that the driver returned -EIO when there was no descriptor available for sending packets. It should return NETDEV_TX_BUSY instead. This was discussed on the netdev list before, see http://thread.gmane.org/gmane.linux.network/84603 . Signed-off-by: Erik Mouw <mouw@nl.linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28[netdrvr] checkpatch cleanupsJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28netdev: ARRAY_SIZE() cleanupsAlejandro Martinez Ruiz
Convert array size calculations to use ARRAY_SIZE(). Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-23[TULIP] DMFE: Fix SROM parsing regression.David S. Miller
Changeset 16b110c3fd760620b4a787db6ed512fe531ab1b5 (dmfe warning fix) bothed up the offsets read from the SROM so that it doesn't read the same datums it used to. The change made transformations like turning: "srom + 34" into "(__le32 *)srom + 34/4" which doesn't work because 4 does not divide evenly into 34 so we're using a different pointer offset than in the original code. I've changed theses cases in dmfe_parse_srom() to consistently use "(type *)(srom + offset)" preserving the offsets from the original code. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-12endianness noise in tulip_coreAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12de4x5 fixesAl Viro
* (trivial) endianness annotations * don't bother with del_timer() from the inside of timer handler itself * disable_ast() really ought to do del_timer_sync(), not del_timer() * clean the timer handling in general. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12xircom_cb endianness fixesAl Viro
* descriptors inside the rx and tx rings are l-e * don't cpu_to_le32() the argument of outl() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-08[NET]: Do not check netif_running() and carrier state in ->poll()David S. Miller
Drivers do this to try to break out of the ->poll()'ing loop when the device is being brought administratively down. Now that we have a napi_disable() "pending" state we are going to solve that problem generically. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[TULIP]: NAPI full quantum bug.Stephen Hemminger
This should fix the kernel warn/oops reported while routing. The tulip driver has a fencepost bug with new NAPI in 2.6.24 It has an off by one bug if a full quantum is reached. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-23dmfe: checkpatch fix (add whitespace)Jeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-23NET: dmfe: don't access configuration space in D3 stateMaxim Levitsky
Accidently I reversed the order of pci_save_state and pci_set_power_state in .suspend()/.resume() callbacks Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-12[NET]: Remove references to net-modules.txt.Adrian Bunk
When I removed net-modules.txt because it only contained ancient information I missed that many Kconfig entries pointed to this ancient information. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (74 commits) fix do_sys_open() prototype sysfs: trivial: fix sysfs_create_file kerneldoc spelling mistake Documentation: Fix typo in SubmitChecklist. Typo: depricated -> deprecated Add missing profile=kvm option to Documentation/kernel-parameters.txt fix typo about TBI in e1000 comment proc.txt: Add /proc/stat field small documentation fixes Fix compiler warning in smount example program from sharedsubtree.txt docs/sysfs: add missing word to sysfs attribute explanation documentation/ext3: grammar fixes Documentation/java.txt: typo and grammar fixes Documentation/filesystems/vfs.txt: typo fix include/asm-*/system.h: remove unused set_rmb(), set_wmb() macros trivial copy_data_pages() tidy up Fix typo in arch/x86/kernel/tsc_32.c file link fix for Pegasus USB net driver help remove unused return within void return function Typo fixes retrun -> return x86 hpet.h: remove broken links ...
2007-10-19Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits) Fix build break in tsi108.c qeth: remove header_ops bug ir-functions.c:(.text+0xbce18): undefined reference to `input_event' NAPI: kconfig prompt and deleted doc file phy/bitbang: missing MODULE_LICENSE DM9000 initialization fix [PATCH] rt2x00: Add new rt73usb USB ID [PATCH] rt2x00: Fix residual check in PLCP calculations. [PATCH] iwlwifi: Fix rate setting in probe request for HW sacn [PATCH] b43: Make b43_stop() static [PATCH] drivers/net/wireless/b43/main.c: fix an uninitialized variable [PATCH] iwlwifi: set correct base rate for A band in rs_dbgfs_set_mcs [PATCH] zd1211rw, fix oops when ejecting install media [PATCH] b43legacy: Fix potential return of uninitialized variable [PATCH] iwl4965-base.c: fix off-by-one errors [PATCH] p54: Make filter configuration atomic [PATCH] rtl8187: remove NICMAC setting in configure_filters callback [PATCH] janitorial: fix all double includes in drivers/net/wireless [PATCH] rtl8187: Fix more frag bit checking, rts duration calc [PATCH] ipw2100: send WEXT scan events ...
2007-10-19NAPI: kconfig prompt and deleted doc fileRandy Dunlap
- make the kconfig NAPI option prompt consistent across all net drivers (other than EXPERIMENTAL; can it now be removed also, or is the new napi_struct implementation now EXPERIMENTAL ?) - remove comment about the now-deleted NAPI_HOWTO.txt file - clean up typos in Tulip NAPI & Interrupt Mitigation Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-20Typo: depricated -> deprecatedRolf Eike Beer
Typo: depricated -> deprecated Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19remove asm/bitops.h includesJiri Slaby
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15netdev: convert non-obvious instances to use ARRAY_SIZE()Alejandro Martinez Ruiz
This will convert remaining non-obvious or naive calculations of array sizes to use ARRAY_SIZE() macro. Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-14more tulip endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14more trivial signedness fixes in driversAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10Fix a potential NULL pointer dereference in uli526x_interrupt() in ↵Micah Gruber
drivers/net/tulip/uli526x.c This patch fixes an apparent potential null dereference bug where we dereference dev before a null check. This patch simply remvoes the can't-happen test for a null pointer. Signed-off-by: Micah Gruber <micah.gruber@gmail.com> Cc: Grant Grundler <grundler@parisc-linux.org> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10Clean up redundant PHY write line for ULi526x Ethernet driverRoy Zang
Clean up redundant PHY write line for ULi526x Ethernet Driver. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10tulip: endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[ETHTOOL] Provide default behaviors for a few ethtool sub-ioctlsJeff Garzik
For the operations get-tx-csum get-sg get-tso get-ufo the default ethtool_op_xxx behavior is fine for all drivers, so we permit op==NULL to imply the default behavior. This provides a more uniform behavior across all drivers, eliminating ethtool(8) "ioctl not supported" errors on older drivers that had not been updated for the latest sub-ioctls. The ethtool_op_xxx() functions are left exported, in case anyone wishes to call them directly from a driver-private implementation -- a not-uncommon case. Should an ethtool_op_xxx() helper remain unused for a while, except by net/core/ethtool.c, we can un-export it at a later date. [ Resolved conflicts with set/get value ethtool patch... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10drivers/net/: all drivers/net/ cleanup with ARRAY_SIZEDenis Cheng
Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10uli526x: Add suspend and resume routines (updated)Rafael J. Wysocki
Add suspend/resume support to the uli526x network driver (tested on x86_64, with 'Ethernet controller: ALi Corporation M5263 Ethernet Controller, rev 40'). This patch is based on the suspend/resume code in the tg3 driver. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10net/tulip/xircom_cb.c: remove superfulous priv assignmentMariusz Kozlowski
Unpatched version does sth like this: dev = alloc_etherdev(... private = netdev_priv(dev); ... dev->priv = private; which doesn't make much sense (does it?) because this is done in alloc_netdev() already. struct net_device *alloc_netdev(... { ... if (sizeof_priv) dev->priv = netdev_priv(dev); This patch removes superfluous code. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/net/tulip/xircom_cb.c | 32853 -> 32831 (-22 bytes) drivers/net/tulip/xircom_cb.o | 123984 -> 123984 (0 bytes) drivers/net/tulip/xircom_cb.c | 1 - 1 file changed, 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[NET]: Make NAPI polling independent of struct net_device objects.Stephen Hemminger
Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31DDB5477: remove driver bits of supportYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15fallout from Auke's pci ->revision patchAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
2007-07-11PCI: add pci_try_set_mwiRandy Dunlap
As suggested by Andrew, add pci_try_set_mwi(), which does not require return-value checking. - add pci_try_set_mwi() without __must_check - make it return 0 on success, errno if the "try" failed or error - review callers Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-10[NET]: Kill eth_copy_and_sum().David S. Miller
It hasn't "summed" anything in over 7 years, and it's just a straight mempcy ala skb_copy_to_linear_data() so just get rid of it. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-08Use menuconfig objects II - netdev (general+100mbit)Jan Engelhardt
CONFIG_NETDEVICES, CONFIG_NET_ETHERNET: Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. CONFIG_SMC9194: Move it so that it appears correctly in menuconfig. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08tulip: Convert to generic booleanRichard Knutsson
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-31 19:41:24 +0000