summaryrefslogtreecommitdiffstats
path: root/drivers/net/ucc_geth.c
AgeCommit message (Collapse)Author
2009-04-02ucc_geth: Pass proper device to DMA routines, otherwise oops happensAnton Vorontsov
The driver should pass a device that actually specifies internal DMA ops, but currently it passes netdev's device, which is wrong and that causes following oops: Kernel BUG at c01c4df8 [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] [...] NIP [c01c4df8] get_new_skb+0x7c/0xf8 LR [c01c4da4] get_new_skb+0x28/0xf8 Call Trace: [ef82be00] [c01c4da4] get_new_skb+0x28/0xf8 (unreliable) [ef82be20] [c01c4eb8] rx_bd_buffer_set+0x44/0x98 [ef82be40] [c01c62bc] ucc_geth_startup+0x11b0/0x147c [ef82be80] [c01c6674] ucc_geth_open+0xec/0x2a4 [ef82bea0] [c02288a4] dev_open+0xc0/0x11c [...] Fix this by passing of_device's device that specifies DMA ops in its archdata. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02ucc_geth: Remove unused headerKumar Gala
Now that the driver is exclusively an of_platform driver we no longer use the structs and #defines in fsl_devices.h Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-29ucc_geth: Fix use-after-of_node_put() in ucc_geth_probe().David S. Miller
We can't put 'mdio' until after we've used it in the fsl_pq_mdio_bus_name() call. Also fix error return values. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27ucc_geth: Fix three oopses in PHY {de,}initialization codeAnton Vorontsov
When there are no free snums, UCC ethernet should gracefully fail, but currently it oopses this way: # ifconfig eth0 up fill_init_enet_entries: Can not get SNUM. ucc_geth_startup: Can not fill p_init_enet_param_shadow. eth0: Cannot configure net device, aborting. Unable to handle kernel paging request for data at address 0x00000190 Faulting instruction address: 0xc0294c88 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c0294c88] mutex_lock+0x0/0x1c LR [c01b6be8] phy_stop+0x20/0x70 Call Trace: [efb25da0] [efb2eb60] 0xefb2eb60 (unreliable) [efb25db0] [c01b2058] ucc_geth_stop+0x2c/0x8c [efb25dd0] [c01b4194] ucc_geth_open+0x48/0x27c [efb25df0] [c020eec0] dev_open+0xc0/0x118 [...] This is because the ucc_geth_stop() routine assumes that ugeth->phydev is always initialized by the ucc_geth_open(), while it is not in case of errors. If we add a check to the ucc_geth_stop(), then another oops pops up: Unable to handle kernel paging request for data at address 0x00000004 Faulting instruction address: 0xc01b46a4 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01b46a4] adjust_link+0x20/0x1b4 LR [c01b770c] phy_state_machine+0xdc/0x44c Call Trace: [ef83bf10] [c021b388] linkwatch_schedule_work+0x74/0xf8 (unreliable) [ef83bf40] [c01b770c] phy_state_machine+0xdc/0x44c [ef83bf60] [c004c13c] run_workqueue+0xb8/0x148 [ef83bf90] [c004c870] worker_thread+0x70/0xd0 [ef83bfd0] [c00505fc] kthread+0x48/0x84 [ef83bff0] [c000f464] kernel_thread+0x4c/0x68 [...] That one happens because ucc_geth_stop() does not call phy_disconnect() and so phylib state machine is running without any idea that a MAC has just died. Also, when device tree specifies fixed-link, and CONFIG_FIXED_PHY is disabled, we'll get this oops: 0:01 not found eth2: Could not attach to PHY eth2: Cannot initialize PHY, aborting. Unable to handle kernel paging request for data at address 0x00000190 Faulting instruction address: 0xc02967d0 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c02967d0] mutex_lock+0x0/0x1c LR [c01b6bcc] phy_stop+0x20/0x70 Call Trace: [ef82be50] [efb6bb60] 0xefb6bb60 (unreliable) [ef82be60] [c01b2058] ucc_geth_stop+0x2c/0x8c [ef82be80] [c01b4194] ucc_geth_open+0x48/0x27c [ef82bea0] [c0210a04] dev_open+0xc0/0x118 [ef82bec0] [c020f85c] dev_change_flags+0x84/0x1ac [ef82bee0] [c037b768] ic_open_devs+0x168/0x2bc [ef82bf20] [c037ca98] ip_auto_config+0x90/0x28c [ef82bf60] [c0001b9c] do_one_initcall+0x34/0x1a0 [ef82bfd0] [c035e240] do_initcalls+0x38/0x58 [ef82bfe0] [c035e2c4] kernel_init+0x30/0x90 [ef82bff0] [c000f464] kernel_thread+0x4c/0x68 [...] And again, ucc_geth_stop() assumes that ugeth->phydev is there, while it isn't. This patch fixes all three oopses simply by rearranging some code: - In ucc_geth_open(): move init_phy() call to the beginning, so that we only call ucc_geth_stop() with a PHY attached; - Move phy_disconnect() call from ucc_geth_close() to ucc_geth_stop(), so that we'll always disconnect the PHY. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ucc_geth: Convert to net_device_opsJoakim Tjernlund
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ucc_geth: Fix build breakage caused by a mergeAnton Vorontsov
This patch fixes following build error: CC ucc_geth.o ucc_geth.c: In function 'ucc_geth_probe': ucc_geth.c:3644: error: implicit declaration of function 'uec_mdio_bus_name' make[2]: *** [ucc_geth.o] Error 1 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23ucc_geth: Fix merge error.David S. Miller
I left a merge failure unresolved, noticed by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ucc_geth.c
2009-03-22ucc_geth: Fix oops when using fixed-link supportAnton Vorontsov
commit b1c4a9dddf09fe99b8f88252718ac5b357363dc4 ("ucc_geth: Change uec phy id to the same format as gianfar's") introduced a regression in the ucc_geth driver that causes this oops when fixed-link is used: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0151270 Oops: Kernel access of bad area, sig: 11 [#1] TMCUTU NIP: c0151270 LR: c0151270 CTR: c0017760 REGS: cf81fa60 TRAP: 0300 Not tainted (2.6.29-rc8) MSR: 00009032 <EE,ME,IR,DR> CR: 24024042 XER: 20000000 DAR: 00000000, DSISR: 20000000 TASK = cf81cba0[1] 'swapper' THREAD: cf81e000 GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80 cf86b08c GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000 0ffc81a0 GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c cf83f000 GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80 cf83f360 NIP [c0151270] ucc_geth_open+0x330/0x1efc LR [c0151270] ucc_geth_open+0x330/0x1efc Call Trace: [cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable) [cf81fba0] [c0187638] dev_open+0xbc/0x12c [cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0 This patch fixes the issue by removing offending (and somewhat duplicate) code from init_phy() routine, and changes _probe() function to use uec_mdio_bus_name(). Also, since we fully construct phy_bus_id in the _probe() routine, we no longer need ->phy_address and ->mdio_bus fields in ucc_geth_info structure. I wish the patch would be a bit shorter, but it seems like the only way to fix the issue in a sane way. Luckily, the patch has been tested with real PHYs and fixed-link, so no further regressions expected. Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-04netdev: Merge UCC and gianfar MDIO bus driversAndy Fleming
The MDIO bus drivers for the UCC and gianfar ethernet controllers are essentially the same. There's no reason to duplicate that much code. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e1000/e1000_main.c
2009-01-29ucc_geth: Change uec phy id to the same format as gianfar'sHaiying Wang
The commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert gianfar to an of_platform_driver") changes the gianfar's phy id to the format like "mdio@xxxx:xx", but uec still uses the old format like "xxxxxxxx:xx". For the board whose UEC uses gianfar-mdio like MPC8568MDS, the phy can not be attached because of the incompatible phy id format. This patch changes uec's phy id to the same format as gianfar's. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21net: Remove redundant NAPI functionsBen Hutchings
Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11ucc_geth: use correct UCCE macrosTimur Tabi
The UCC Event Register (UCCE) already has unambigous macro definitions in qe.h, so we should not be defining our own in the UCC Ethernet driver. Removed unused local variable 'dev' from ucc_geth_poll(), which fixes a warning caused by commit 908a7a16b852ffd618a9127be8d62432182d81b4 ("net: Remove unused netdev arg from some NAPI interfaces."). Replaced in_be/out_be pairs with setbits32 or clrbits32, where applicable. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26ucc_geth: Eliminate the need for forward referencesAnton Vorontsov
This patch simply reorders some functions to eliminate the need for forward references. No other changes than that. Suggested-by: Timur Tabi <timur@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-18ucc_geth: Remove UGETH_FILTERING dead codeAnton Vorontsov
The code appears to be dead: nobody call these functions, plus build breaks when UGETH_FILTERING is enabled: ucc_geth.c:1848: warning: 'struct enet_addr' declared inside parameter list ucc_geth.c:1848: warning: its scope is only this definition or declaration, which is probably not what you want ucc_geth.c: In function 'ugeth_82xx_filtering_get_match_addr_in_hash': ucc_geth.c:1856: error: dereferencing pointer to incomplete type ucc_geth.c:1874: error: dereferencing pointer to incomplete type ucc_geth.c:1877: warning: return from incompatible pointer type ucc_geth.c: At top level: ucc_geth.c:1885: warning: 'struct enet_addr' declared inside parameter list ucc_geth.c: In function 'ugeth_82xx_filtering_add_addr_in_hash': ucc_geth.c:1894: error: dereferencing pointer to incomplete type ucc_geth.c:1909: warning: passing argument 2 of 'ugeth_82xx_filtering_get_match_addr_in_hash' from incompatible pointer type ucc_geth.c:1909: warning: assignment from incompatible pointer type ucc_geth.c:1918: error: dereferencing pointer to incomplete type ucc_geth.c: At top level: ucc_geth.c:1928: warning: 'struct enet_addr' declared inside parameter list ucc_geth.c: In function 'ugeth_82xx_filtering_clear_addr_in_hash': ucc_geth.c:1947: warning: passing argument 2 of 'ugeth_82xx_filtering_get_match_addr_in_hash' from incompatible pointer type ucc_geth.c:1947: warning: assignment from incompatible pointer type ucc_geth.c:1954: error: dereferencing pointer to incomplete type ucc_geth.c: At top level: ucc_geth.c:2060: warning: 'struct enet_addr' declared inside parameter list ucc_geth.c: In function 'ugeth_82xx_filtering_add_addr_in_paddr': ucc_geth.c:2064: error: dereferencing pointer to incomplete type ucc_geth.c:2073: error: dereferencing pointer to incomplete type ucc_geth.c:2075: warning: passing argument 2 of 'hw_add_addr_in_paddr' from incompatible pointer type make[2]: *** [ucc_geth.o] Error 1 The code is there since the driver was merged, and nobody seem to be interested in fixing or actually using it. If we ever want the filtering support, we can always revert the patch and fix it, but so far it just draws reader's attention. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-18ucc_geth: Fix IO memory (un)mapping codeAnton Vorontsov
The driver doesn't check ioremap() return value, and doesn't free the remapped memory. This patch fixes it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-18ucc_geth: Cleanup repetitive ucc_geth_memclean() callsAnton Vorontsov
No need to call ucc_geth_memclean() so many times, just check for errors in ucc_geth_open(), and call ucc_geth_stop() in case of errors. The ucc_geth_stop() may be called anytime and will do the right thing. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-18ucc_geth: Fix IRQ freeing code in ucc_geth_open()Anton Vorontsov
open() routine calls stop() in case of errors, the function will try to free the requested IRQ. But we don't know if it was actually requested, so the code might issue bogus free_irq(0, dev) call. Fix this by rearranging the code so that now request_irq() is the last call in the open() routine, and move free_irq() into the close(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-18ucc_geth: Fix TX watchdog timeout handlingAnton Vorontsov
The timeout handling code is currently broken in several ways: - It calls stop() (which frees all the memory and IRQ), and then calls startup() (which won't re-request IRQ, neither it will re-init the Fast UCC structure). - It calls these routines from the softirq context, which is wrong, since stop() calls free_irq() (which might sleep) and startup() allocates things with GFP_KERNEL. - It won't soft-reset the PHY. We need the PHY reset for at least MPC8360E-MDS boards with Marvell 88E1111 PHY, the PHY won't recover from timeouts w/o the reset. So the patch fixes these problems by implementing the workqueue for the timeout handling, and there we fully re-open the device via close() and open() calls. The close/open paths do the right things, and I can see that the driver actually survive the timeouts. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-18ucc_geth: Fix endless loop in stop_{tx,rx} routinesAnton Vorontsov
Currently the routines wait for the various bits w/o an assumption that bits may never get set. When timeouts happen I see that these bits never get set and so the routines hang the kernel. With this patch we'll wait the graceful stop for 100 ms, and then will simply exit. There is nothing* we can do about that, but it's OK since we'll do full reset later. * Well, actually, there is also not-graceful variant for the TX stop, but specs says that we never should use it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-24drivers/net: replace __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-21ucc_geth: do not touch net queue in adjust_link phylib callbackAnton Vorontsov
If the net queue has not been started, we'll get this nice oops and non-working ethernet: ------------[ cut here ]------------ Kernel BUG at c01f4648 [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC836x RDK Modules linked in: NIP: c01f4648 LR: c01c0a10 CTR: c01c08e4 REGS: cf839e40 TRAP: 0700 Not tainted (2.6.26-05254-gc7b9969) MSR: 00021032 <ME,IR,DR> CR: 22042044 XER: 00000000 TASK = cf828c30[4] 'events/0' THREAD: cf838000 GPR00: c01c0a10 cf839ef0 cf828c30 c035ceb0 cf8469a0 00000064 00000000 00000000 GPR08: c035ceb0 00000001 00000001 cf99c280 22044044 7ca81020 0fffc000 00000000 GPR16: 0fff2544 0fff63c0 00000000 0fff78e0 0ffa5580 00000004 00000000 00000000 GPR24: 02082000 cf9d0000 d1068000 00009032 cf846800 cf846b80 00000001 00000014 NIP [c01f4648] __netif_schedule+0x28/0x8c LR [c01c0a10] adjust_link+0x12c/0x1e4 Call Trace: [cf839ef0] [c0380f50] 0xc0380f50 (unreliable) [cf839f10] [c01c0a10] adjust_link+0x12c/0x1e4 [cf839f40] [c01c2628] phy_state_machine+0x2e0/0x448 [cf839f60] [c00425e8] run_workqueue+0xc8/0x168 [cf839f90] [c0042c6c] worker_thread+0x70/0xd0 [cf839fd0] [c0046954] kthread+0x48/0x84 [cf839ff0] [c0012488] kernel_thread+0x44/0x60 Instruction dump: 7c0803a6 4e800020 3d20c036 9421ffe0 7c0802a6 7c681b78 3929ceb0 7c694a78 7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028 ---[ end trace a57d367843bd2904 ]--- Since the driver is using phylib (which is doing netif_carrier_on/off()), we should simply remove netif_tx_schedule_all() from adjust_link(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/powerpc/booting-without-of.txt drivers/atm/Makefile drivers/net/fs_enet/fs_enet-main.c drivers/pci/pci-acpi.c net/8021q/vlan.c net/iucv/iucv.c
2008-07-17netdev: Convert all drivers away from netif_schedule().David S. Miller
They logically all want to trigger a schedule for all device TX queues. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-11ucc_geth: delete non NAPI code from the driver.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-30drivers/net: Use linux/of_{device,platform}.h instead of asmStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-22ucc_geth: Fix arguments to dma map/unmap functionsAndy Fleming
We were passing NULL as the device. When we actually start supporting more interesting memory configurations, this will break things, so we proactively are fixing the bug. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06ucc_geth: Don't use RX clock as TX clock.Joakim Tjernlund
Commit 9fb1e350e16164d56990dde036ae9c0a2fd3f634, ucc_geth: use rx-clock-name and tx-clock-name device tree properties Introduced a typo that made the driver use the RX clock as TX clock, causing massive TX errors. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06ucc_geth: Fix a bunch of sparse warningsAndy Fleming
ucc_geth didn't have anything marked as __iomem. It was also inconsistent with its use of in/out accessors (using them sometimes, not using them other times). Cleaning this up cuts the warnings down from hundreds to just over a dozen. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (48 commits) net: Fix wrong interpretation of some copy_to_user() results. xfrm: alg_key_len & alg_icv_len should be unsigned [netdrvr] tehuti: move ioctl perm check closer to function start ipv6: Fix typo in net/ipv6/Kconfig via-velocity: fix vlan receipt tg3: sparse cleanup forcedeth: realtek phy crossover detection ibm_newemac: Increase MDIO timeouts gianfar: Fix skb allocation strategy netxen: reduce stack usage of netxen_nic_flash_print smc911x: test after postfix decrement fails in smc911x_{reset,drop_pkt} net drivers: fix platform driver hotplug/coldplug forcedeth: new backoff implementation ehea: make things static phylib: Add support for board-level PHY fixups [netdrvr] atlx: code movement: move atl1 parameter parsing atlx: remove flash vendor parameter korina: misc cleanup korina: fix misplaced return statement WAN: Fix confusing insmod error code for C101 too. ...
2008-04-25ucc_geth: Fix sneaky merge conflict regarding bus_idAndy Fleming
The patch that changed mdio_bus to a string didn't conflict strongly enough with the patch that added fixed PHY support to UCC. Gather it back into the fold. Fixes this error: ... CC drivers/net/ucc_geth.o 'ucc_geth_probe': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/net/ucc_geth.c:3935: error: incompatible types in assignment make[3]: *** [drivers/net/ucc_geth.o] Error 1 Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-21Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits) [POWERPC] Fix compile breakage for 64-bit UP configs [POWERPC] Define copy_siginfo_from_user32 [POWERPC] Add compat handler for PTRACE_GETSIGINFO [POWERPC] i2c: Fix build breakage introduced by OF helpers [POWERPC] Optimize fls64() on 64-bit processors [POWERPC] irqtrace support for 64-bit powerpc [POWERPC] Stacktrace support for lockdep [POWERPC] Move stackframe definitions to common header [POWERPC] Fix device-tree locking vs. interrupts [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const [POWERPC] Remove unused __max_memory variable [POWERPC] Simplify xics direct/lpar irq_host setup [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ() [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade() [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c [POWERPC] Use asm-generic/bitops/find.h in bitops.h [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup [POWERPC] 85xx: Fix the size of qe muram for MPC8568E [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier. [POWERPC] 86xx: mark functions static, other minor cleanups ...
2008-04-17[POWERPC] QE: UCC nodes cleanupAnton Vorontsov
- get rid of `model = "UCC"' in the ucc nodes It isn't used anywhere, so remove it. If we'll ever need something like this, we'll use compatible property instead. - replace last occurrences of device-id with cell-index. Drivers are modified for backward compatibility's sake. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-16phy: Change mii_bus id field to a stringAndy Fleming
Having the id field be an int was making more complex bus topologies excessively difficult. For now, just convert it to a string, and change all instances of "bus->id = val" to snprintf(id, MII_BUS_ID_LEN, "%x", val). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12ucc_geth: fix non-functional fixed phy supportJoakim Tjernlund
The new Fixed PHY method, fixed-link property, isn't impl. for ucc_geth which makes fixed PHYs non functional. Add support for the new method to restore the Fixed PHY functionality. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-03-17ucc_geth: use correct thread number for 10/100Mbps linkJoakim Tjernlund
Use thread number of 1 for 10/100Mbps link instead of 4. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-03ucc_geth: add support for netpollAnton Vorontsov
This patch adds netpoll support for the QE UCC Gigabit Ethernet driver. Tested using netconsole and KGDBoE. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03ucc_geth: fix module removalAnton Vorontsov
- uccf should be set to NULL to not double-free memory on subsequent calls; - ind_hash_q and group_hash_q lists should be initialized in the probe() function, instead of struct_init() (called by open()), otherwise there will be an oops if ucc_geth_driver removed prior 'ifconfig ethX up'; - add unregister_netdev(); - reorder geth_remove() steps. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31Merge branch 'linux-2.6'Paul Mackerras
2008-01-28[netdrvr] irq handler minor cleanups in several driversJeff Garzik
* use irq_handler_t where appropriate * no need to use 'irq' function arg, its already stored in a data struct * rename irq handler 'irq' argument to 'dummy', where the function has been analyzed and proven not to use its first argument. * remove always-false "dev_id == NULL" test from irq handlers * remove pointless casts from void* * declance: irq argument is not const * add KERN_xxx printk prefix * fix minor whitespace weirdness Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-12-21Merge branch 'linux-2.6'Paul Mackerras
2007-12-14ucc_geth: minor whitespace fixAndrew Morton
The zombie whitespace from outer space that will not die! Cc: "David S. Miller" <davem@davemloft.net> Cc: Emil Medve <Emilian.Medve@Freescale.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-14[POWERPC] ucc_geth: use rx-clock-name and tx-clock-name device tree propertiesTimur Tabi
Updates the ucc_geth device driver to check the new rx-clock-name and tx-clock-name properties first. If present, it uses the new function qe_clock_source() to obtain the clock source. Otherwise, it checks the deprecated rx-clock and tx-clock properties. Update the device trees for 832x, 836x, and 8568 to contain the new property names only. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-01ucc_geth: handle passing of RX-only and TX-only internal delay PHY ↵Kim Phillips
connection type parameters Extend the RGMII-Internal Delay specification case to include TX-only and RX-only variants. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Tested-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-29Fix ethernet multicast for ucc_geth.Joakim Tjernlund
hw_add_addr_in_hash() already swaps byte order, don't do it in ucc_geth_set_multi() too. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: ucc_geth maintainer Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-23Eliminate pointless casts from void* in a few driver irq handlers.Jeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-24 14:26:36 +0000