| Age | Commit message (Collapse) | Author |
|---|
|
Changes:
- claim slave/data interface during bind() and release
interfaces in unbind() unconditionally
- in case of error during bind(), release claimed data
interface in the same function
- remove obsolited "*_claimed" entries from driver context
Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
b43: fix comment typo reqest -> request
Haavard Skinnemoen has left Atmel
cris: typo in mach-fs Makefile
Kconfig: fix copy/paste-ism for dell-wmi-aio driver
doc: timers-howto: fix a typo ("unsgined")
perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
treewide: fix a few typos in comments
regulator: change debug statement be consistent with the style of the rest
Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
audit: acquire creds selectively to reduce atomic op overhead
rtlwifi: don't touch with treewide double semicolon removal
treewide: cleanup continuations and remove logging message whitespace
ath9k_hw: don't touch with treewide double semicolon removal
include/linux/leds-regulator.h: fix syntax in example code
tty: fix typo in descripton of tty_termios_encode_baud_rate
xtensa: remove obsolete BKL kernel option from defconfig
m68k: fix comment typo 'occcured'
arch:Kconfig.locks Remove unused config option.
treewide: remove extra semicolons
...
|
|
Changes:
- while making NTB, driver shall check if device dwNtbOutMaxSize is higher than
host value and shall add a short packet if this is the case
- previous temporary patch for this issue is replaced by this one
Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-3.6
Conflicts:
drivers/net/benet/be_main.c
|
|
Like other mobile broadband device ethernet interfaces, mark the LG
VL600 with the 'wwan' devtype so userspace knows it needs additional
configuration via the AT port before the interface can be used.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- kenrel -> kernel
- whetehr -> whether
- ttt -> tt
- sss -> ss
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The USB protocol this driver implements appears to require 2 bytes of
padding in front of each received packet. This used to be equal to
the value of NET_IP_ALIGN on x86, so the driver abused that constant
and mostly worked, but this is no longer the case. The driver also
mixed up the URB and packet lengths, resulting in 2 bytes of junk at
the end of the skb.
Introduce a private constant for the 2 bytes of padding; fix this
confusion and check for the under-length case.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/tg3.c
|
|
This patch makes use of the EVENT_DEV_OPEN flag introduced recently to
fix one out of memory issue, which can be reproduced on omap3/4 based
pandaboard/beagle XM easily with steps below:
- enable runtime pm
echo auto > /sys/devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.1/power/control
- ifconfig eth0 up
- then out of memroy happened, see [1] for kernel message.
Follows my analysis:
- 'ifconfig eth0 up' brings eth0 out of suspend, and usbnet_resume
is called to schedule dev->bh, then rx urbs are submited to prepare for
recieving data;
- some usbnet devices will produce garbage rx packets flood if
info->reset is not called in usbnet_open.
- so there is no enough chances for usbnet_bh to handle and release
recieved skb buffers since many rx interrupts consumes cpu, so out of memory
for atomic allocation in rx_submit happened.
This patch fixes the issue by simply not allowing schedule of usbnet_bh until device
is opened.
[1], dmesg
[ 234.712005] smsc95xx 1-1.1:1.0: rpm_resume flags 0x4
[ 234.712066] usb 1-1.1: rpm_resume flags 0x0
[ 234.712066] usb 1-1: rpm_resume flags 0x0
[ 234.712097] usb usb1: rpm_resume flags 0x0
[ 234.712127] usb usb1: usb auto-resume
[ 234.712158] ehci-omap ehci-omap.0: resume root hub
[ 234.754028] hub 1-0:1.0: hub_resume
[ 234.754821] hub 1-0:1.0: port 1: status 0507 change 0000
[ 234.756011] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 234.756042] hub 1-0:1.0: rpm_resume flags 0x4
[ 234.756072] usb usb1: rpm_resume flags 0x0
[ 234.756164] usb usb1: rpm_resume returns 1
[ 234.756195] hub 1-0:1.0: rpm_resume returns 0
[ 234.756195] hub 1-0:1.0: rpm_suspend flags 0x4
[ 234.756225] hub 1-0:1.0: rpm_suspend returns 0
[ 234.756256] usb usb1: rpm_resume returns 0
[ 234.757141] usb 1-1: usb auto-resume
[ 234.793151] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 234.816558] usb 1-1: finish resume
[ 234.817871] hub 1-1:1.0: hub_resume
[ 234.818420] hub 1-1:1.0: port 1: status 0507 change 0000
[ 234.820495] ehci-omap ehci-omap.0: reused qh eec50220 schedule
[ 234.820495] usb 1-1: link qh256-0001/eec50220 start 1 [1/0 us]
[ 234.820587] usb 1-1: rpm_resume returns 0
[ 234.820800] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0000
[ 234.820800] hub 1-1:1.0: rpm_resume flags 0x4
[ 234.820831] hub 1-1:1.0: rpm_resume returns 0
[ 234.820861] hub 1-1:1.0: rpm_suspend flags 0x4
[ 234.820861] hub 1-1:1.0: rpm_suspend returns 0
[ 234.821777] usb 1-1.1: usb auto-resume
[ 234.868591] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
[ 234.868591] hub 1-1:1.0: rpm_resume flags 0x4
[ 234.868621] hub 1-1:1.0: rpm_resume returns 0
[ 234.868652] hub 1-1:1.0: rpm_suspend flags 0x4
[ 234.868652] hub 1-1:1.0: rpm_suspend returns 0
[ 234.879486] usb 1-1.1: finish resume
[ 234.880279] usb 1-1.1: rpm_resume returns 0
[ 234.880310] smsc95xx 1-1.1:1.0: rpm_resume returns 0
[ 238.880187] ksoftirqd/0: page allocation failure. order:0, mode:0x20
[ 238.880218] Backtrace:
[ 238.880249] [<c01b9800>] (dump_backtrace+0x0/0xf8) from [<c065e1dc>] (dump_stack+0x18/0x1c)
[ 238.880249] r6:00000000 r5:00000000 r4:00000020 r3:00000002
[ 238.880310] [<c065e1c4>] (dump_stack+0x0/0x1c) from [<c026ece4>] (__alloc_pages_nodemask+0x620/0x724)
[ 238.880340] [<c026e6c4>] (__alloc_pages_nodemask+0x0/0x724) from [<c02986d4>] (kmem_getpages.clone.34+0x34/0xc8)
[ 238.880371] [<c02986a0>] (kmem_getpages.clone.34+0x0/0xc8) from [<c02988f8>] (cache_grow.clone.42+0x84/0x154)
[ 238.880371] r6:ef871aa4 r5:ef871a80 r4:ef81fd40 r3:00000020
[ 238.880401] [<c0298874>] (cache_grow.clone.42+0x0/0x154) from [<c0298b64>] (cache_alloc_refill+0x19c/0x1f0)
[ 238.880432] [<c02989c8>] (cache_alloc_refill+0x0/0x1f0) from [<c0299804>] (kmem_cache_alloc+0x90/0x190)
[ 238.880462] [<c0299774>] (kmem_cache_alloc+0x0/0x190) from [<c052e260>] (__alloc_skb+0x34/0xe8)
[ 238.880493] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
[ 238.880523] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf050d38>] (rx_complete+0x19c/0x1b0 [usbnet])
[ 238.880737] [<bf050b9c>] (rx_complete+0x0/0x1b0 [usbnet]) from [<bf006fd0>] (usb_hcd_giveback_urb+0xa8/0xf4 [usbcore])
[ 238.880737] r8:eeeced34 r7:eeecec00 r6:eeecec00 r5:00000000 r4:eec2dd20
[ 238.880767] r3:bf050b9c
[ 238.880859] [<bf006f28>] (usb_hcd_giveback_urb+0x0/0xf4 [usbcore]) from [<bf03c8f8>] (ehci_urb_done+0xb0/0xbc [ehci_hcd])
[ 238.880859] r6:00000000 r5:eec2dd20 r4:eeeced44 r3:eec2dd34
[ 238.880920] [<bf03c848>] (ehci_urb_done+0x0/0xbc [ehci_hcd]) from [<bf040204>] (qh_completions+0x308/0x3bc [ehci_hcd])
[ 238.880920] r7:00000000 r6:eeda21a0 r5:ffdfe3c0 r4:eeda21ac
[ 238.880981] [<bf03fefc>] (qh_completions+0x0/0x3bc [ehci_hcd]) from [<bf040ef8>] (scan_async+0xb0/0x16c [ehci_hcd])
[ 238.881011] [<bf040e48>] (scan_async+0x0/0x16c [ehci_hcd]) from [<bf040fec>] (ehci_work+0x38/0x90 [ehci_hcd])
[ 238.881042] [<bf040fb4>] (ehci_work+0x0/0x90 [ehci_hcd]) from [<bf042940>] (ehci_irq+0x300/0x34c [ehci_hcd])
[ 238.881072] r4:eeeced34 r3:00000001
[ 238.881134] [<bf042640>] (ehci_irq+0x0/0x34c [ehci_hcd]) from [<bf006828>] (usb_hcd_irq+0x40/0xac [usbcore])
[ 238.881195] [<bf0067e8>] (usb_hcd_irq+0x0/0xac [usbcore]) from [<c0239764>] (handle_irq_event_percpu+0xb8/0x240)
[ 238.881225] r6:eec504e0 r5:0000006d r4:eec504e0 r3:bf0067e8
[ 238.881256] [<c02396ac>] (handle_irq_event_percpu+0x0/0x240) from [<c0239930>] (handle_irq_event+0x44/0x64)
[ 238.881256] [<c02398ec>] (handle_irq_event+0x0/0x64) from [<c023bbd0>] (handle_level_irq+0xe0/0x114)
[ 238.881286] r6:0000006d r5:c080c14c r4:c080c100 r3:00020000
[ 238.881317] [<c023baf0>] (handle_level_irq+0x0/0x114) from [<c01ab090>] (asm_do_IRQ+0x90/0xd0)
[ 238.881317] r5:00000000 r4:0000006d
[ 238.881347] [<c01ab000>] (asm_do_IRQ+0x0/0xd0) from [<c06624d0>] (__irq_svc+0x50/0x134)
[ 238.881378] Exception stack(0xef837e20 to 0xef837e68)
[ 238.881378] 7e20: 00000001 00185610 016cc000 c00490c0 eb380000 ef800540 00000020 00004ae0
[ 238.881408] 7e40: 00000020 bf0509f4 60000013 ef837e9c ef837e40 ef837e68 c0226f0c c0298ca0
[ 238.881408] 7e60: 20000013 ffffffff
[ 238.881408] r5:fa240100 r4:ffffffff
[ 238.881439] [<c0298bb8>] (__kmalloc_track_caller+0x0/0x1d0) from [<c052e284>] (__alloc_skb+0x58/0xe8)
[ 238.881469] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
[ 238.881500] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf0513d8>] (usbnet_bh+0x1b4/0x250 [usbnet])
[ 238.881530] [<bf051224>] (usbnet_bh+0x0/0x250 [usbnet]) from [<c01f912c>] (tasklet_action+0xb0/0x1f8)
[ 238.881530] r6:00000000 r5:ef9757f0 r4:ef9757ec r3:bf051224
[ 238.881561] [<c01f907c>] (tasklet_action+0x0/0x1f8) from [<c01f97ac>] (__do_softirq+0x140/0x290)
[ 238.881561] r8:00000006 r7:00000101 r6:00000000 r5:c0806098 r4:00000001
[ 238.881591] r3:c01f907c
[ 238.881622] [<c01f966c>] (__do_softirq+0x0/0x290) from [<c01f99cc>] (run_ksoftirqd+0xd0/0x1f4)
[ 238.881622] [<c01f98fc>] (run_ksoftirqd+0x0/0x1f4) from [<c02113b0>] (kthread+0x90/0x98)
[ 238.881652] r7:00000013 r6:c01f98fc r5:00000000 r4:ef831efc
[ 238.881683] [<c0211320>] (kthread+0x0/0x98) from [<c01f62f4>] (do_exit+0x0/0x374)
[ 238.881713] r6:c01f62f4 r5:c0211320 r4:ef831efc
[ 238.881713] Mem-info:
[ 238.881744] Normal per-cpu:
[ 238.881744] CPU 0: hi: 186, btch: 31 usd: 38
[ 238.881744] CPU 1: hi: 186, btch: 31 usd: 169
[ 238.881774] HighMem per-cpu:
[ 238.881774] CPU 0: hi: 90, btch: 15 usd: 66
[ 238.881774] CPU 1: hi: 90, btch: 15 usd: 86
[ 238.881805] active_anon:544 inactive_anon:71 isolated_anon:0
[ 238.881805] active_file:926 inactive_file:2538 isolated_file:0
[ 238.881805] unevictable:0 dirty:10 writeback:0 unstable:0
[ 238.881805] free:57782 slab_reclaimable:864 slab_unreclaimable:186898
[ 238.881805] mapped:632 shmem:144 pagetables:50 bounce:0
[ 238.881835] Normal free:1328kB min:3532kB low:4412kB high:5296kB active_anon:0kB inactive_anon:0kB active_file:880kB inactive_file:848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:780288kB mlocked:0kB dirty:36kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:3456kB slab_unreclaimable:747592kB kernel_stack:392kB pagetables:200kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[ 238.881866] lowmem_reserve[]: 0 1904 1904
[ 238.881896] HighMem free:229800kB min:236kB low:508kB high:784kB active_anon:2176kB inactive_anon:284kB active_file:2824kB inactive_file:9304kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:243712kB mlocked:0kB dirty:4kB writeback:0kB mapped:2528kB shmem:576kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[ 238.881927] lowmem_reserve[]: 0 0 0
[ 238.881958] Normal: 0*4kB 4*8kB 6*16kB 0*32kB 1*64kB 1*128kB 0*256kB 2*512kB 0*1024kB 0*2048kB 0*4096kB = 1344kB
[ 238.882019] HighMem: 6*4kB 2*8kB 4*16kB 4*32kB 1*64kB 1*128kB 0*256kB 2*512kB 3*1024kB 0*2048kB 55*4096kB = 229800kB
[ 238.882080] 3610 total pagecache pages
[ 238.882080] 0 pages in swap cache
[ 238.882080] Swap cache stats: add 0, delete 0, find 0/0
[ 238.882110] Free swap = 0kB
[ 238.882110] Total swap = 0kB
[ 238.933776] 262144 pages of RAM
[ 238.933776] 58240 free pages
[ 238.933776] 10503 reserved pages
[ 238.933776] 187773 slab pages
[ 238.933807] 2475 pages shared
[ 238.933807] 0 pages swap cached
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The reset loop check should check the MII_BMCR register value for
BMCR_RESET rather than for MII_BMCR (the register address, which also
happens to be zero).
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This updates the network drivers so that they don't access the
ethtool_cmd::speed field directly, but use ethtool_cmd_speed()
instead.
For most of the drivers, these changes are purely cosmetic and don't
fix any problem, such as for those 1GbE/10GbE drivers that indirectly
call their own ethtool get_settings()/mii_ethtool_gset(). The changes
are meant to enforce code consistency and provide robustness with
future larger throughputs, at the expense of a few CPU cycles for each
ethtool operation.
All drivers compiled with make allyesconfig ion x86_64 have been
updated.
Tested: make allyesconfig on x86_64 + e1000e/bnx2x work
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This makes sure that when a driver calls the ethtool's
get/set_settings() callback of another driver, the data passed to it
is clean. This guarantees that speed_hi will be zeroed correctly if
the called callback doesn't explicitely set it: we are sure we don't
get a corrupted speed from the underlying driver. We also take care of
setting the cmd field appropriately (ETHTOOL_GSET/SSET).
This applies to dev_ethtool_get_settings(), which now makes sure it
sets up that ethtool command parameter correctly before passing it to
drivers. This also means that whoever calls dev_ethtool_get_settings()
does not have to clean the ethtool command parameter. This function
also becomes an exported symbol instead of an inline.
All drivers visible to make allyesconfig under x86_64 have been
updated.
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some newer Huawei devices (T-Mobile Rocket, others) have cdc-ether
compatible ports, so recognize and expose them.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Resubmit interrupt URB if device is open. Use a flag set in
usbnet_open() to determine this state. Also kill and free
interrupt URB in usbnet_disconnect().
[Rebased off git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git]
Signed-off-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Resolved logic conflicts causing a build failure due to
drivers/net/r8169.c changes using a patch from Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The default maximum transmit length for NCM USB frames should be so
that a short packet happens at the end if the device supports a length
greater than the defined maximum. This is achieved by adding 4 bytes
to the maximum length so that the existing logic can fit a short
packet there.
Signed-off-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
My changes in commit 4d42d417be75d750b82798922b6e775915e11bce were
written some time before the introduction of FLAG_POINTTOPOINT, so
didn't include that flag in the new driver_info. Change the new
driver_info to be consistent.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some RNDIS devices don't respond on the control channel until polled
on the status channel. In particular, this was reported to be the
case for the 2Wire HomePortal 1000SW and for some Windows Mobile
devices.
This is roughly based on a patch by John Carr <john.carr@unrouted.co.uk>
which is currently applied by Mandriva.
Reported-by: Mark Glassberg <vzeeaxwl@myfairpoint.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/smsc911x.c
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
net: Add support for SMSC LAN9530, LAN9730 and LAN89530
mlx4_en: Restoring RX buffer pointer in case of failure
mlx4: Sensing link type at device initialization
ipv4: Fix "Set rt->rt_iif more sanely on output routes."
MAINTAINERS: add entry for Xen network backend
be2net: Fix suspend/resume operation
be2net: Rename some struct members for clarity
pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev
dsa/mv88e6131: add support for mv88e6085 switch
ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2)
be2net: Fix a potential crash during shutdown.
bna: Fix for handling firmware heartbeat failure
can: mcp251x: Allow pass IRQ flags through platform data.
smsc911x: fix mac_lock acquision before calling smsc911x_mac_read
iwlwifi: accept EEPROM version 0x423 for iwl6000
rt2x00: fix cancelling uninitialized work
rtlwifi: Fix some warnings/bugs
p54usb: IDs for two new devices
wl12xx: fix potential buffer overflow in testmode nvs push
zd1211rw: reset rx idle timer from tasklet
...
|
|
This patch adds support for SMSC's LAN9530, LAN9730 and LAN89530 USB
ethernet controllers to the existing smsc95xx driver by adding
their new USB VID/PID pairs.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds some debug to the reset function to print out the
reason why it fails.
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for the PL-25A1 by adding the appropriate
USB ID's. This chip is used in the Belkin 'Windows Easy Transfer'
Cables.
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch cleans up a couple of instances of incorrect whitespace
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
Fix common misspellings
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
|
|
There's a race (not fixed here) in smsc75xx in setting RFE_CTL that's not
properly handled via rfe_ctl_lock. Spinlock is not a good tool here, as
this has to wait for URB completion (or maybe just submission) after issuing
register write request. Otherwise, the rfe_ctl might be changed just after
spin_unlock() and device left programmed with other value.
smsc95xx has increased hard_header_len for the case of TX checksumming.
smsc75xx is fixed to advertise IP+IPV6_CSUM instead of HW_CSUM as it does
not use csum_start/csum_offset.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The documentation for the USB ethernet devices suggests that
only some devices are supposed to use usb0 as the network interface
name instead of eth0. The logic used there, and documented in
Kconfig for CDC is that eth0 will be used when the mac address
is a globally assigned one, but usb0 is used for the locally
managed range that is typically used on point-to-point links.
Unfortunately, this has caused a lot of pain on the smsc95xx
device that is used on the popular pandaboard without an
EEPROM to store the MAC address, which causes the driver to
call random_ether_address().
Obviously, there should be a proper MAC addressed assigned to
the device, and discussions are ongoing about how to solve
this, but this patch at least makes sure that the default
interface naming gets a little saner and matches what the
user can expect based on the documentation, including for
new devices.
The approach taken here is to flag whether a device might be a
point-to-point link with the new FLAG_POINTTOPOINT setting in
the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT
and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one
of the two. The usbnet framework only looks at the MAC address
for device naming if both flags are set, otherwise it trusts the
flag.
Signed-off-by: Arnd Bergmann <arnd.bergmann@linaro.org>
Tested-by: Andy Green <andy.green@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
This adds a driver for the CDC Ethernet part of this modem. The
device's ID is blacklisted in cdc_ether.c and is white-listed in
this new driver because of the quirks needed to make it useful.
The modem's firmware exposes a CDC ACM port for modem control and a
CDC Ethernet port for network data. The descriptors look fine but
both ports actually are some sort of multiplexers requiring non-
standard headers added/removed from every packet or they get
ignored. All information is based on a usb traffic log from a
Windows machine.
On the Verizon 4G network I've seen speeds up to 1.1MB/s so far with
this driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps.
Userspace scripts are required to talk to the CDC ACM port.
Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The set_multicast operation performs asynchronous writes to the
device, with some addresses pointing to the stack. Bad things may
happen, and this is trapped CONFIG_DMA_API_DEBUG:
[ 5.237762] WARNING: at /build/buildd/linux-linaro-omap-2.6.38/lib/dma-debug.c:867 check_for_stack+0xd4/0x100()
[ 5.237792] ehci-omap ehci-omap.0: DMA-API: device driver maps memory fromstack [addr=d9c77dec]
[ 5.237792] Modules linked in: smsc95xx(+) usbnet twl6030_usb twl4030_pwrbutton leds_gpio omap_wdt omap2_mcspi
[ 5.237854] [<c006d618>] (unwind_backtrace+0x0/0xf8) from [<c00a6a14>] (warn_slowpath_common+0x54/0x64)
[ 5.237884] [<c00a6a14>] (warn_slowpath_common+0x54/0x64) from [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40)
[ 5.237915] [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) from [<c034e9d8>] (check_for_stack+0xd4/0x100)
[ 5.237915] [<c034e9d8>] (check_for_stack+0xd4/0x100) from [<c034fea8>] (debug_dma_map_page+0xb4/0xdc)
[ 5.237976] [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) from [<c04242f0>] (map_urb_for_dma+0x26c/0x304)
[ 5.237976] [<c04242f0>] (map_urb_for_dma+0x26c/0x304) from [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c)
[ 5.238037] [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) from [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx])
[ 5.238067] [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) from [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx])
[ 5.238098] [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) from [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx])
[ 5.238128] [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) from [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx])
[ 5.238159] [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) from [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet])
[ 5.238220] [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) from [<c0429078>] (usb_probe_interface+0xe4/0x1c4)
[ 5.238250] [<c0429078>] (usb_probe_interface+0xe4/0x1c4) from [<c03a8770>] (really_probe+0x64/0x160)
[ 5.238250] [<c03a8770>] (really_probe+0x64/0x160) from [<c03a8a30>] (driver_probe_device+0x48/0x60)
[ 5.238281] [<c03a8a30>] (driver_probe_device+0x48/0x60) from [<c03a8ad4>] (__driver_attach+0x8c/0x90)
[ 5.238311] [<c03a8ad4>] (__driver_attach+0x8c/0x90) from [<c03a7b24>] (bus_for_each_dev+0x50/0x7c)
[ 5.238311] [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) from [<c03a82ec>] (bus_add_driver+0x190/0x250)
[ 5.238311] [<c03a82ec>] (bus_add_driver+0x190/0x250) from [<c03a8cf8>] (driver_register+0x78/0x13c)
[ 5.238433] [<c03a8cf8>] (driver_register+0x78/0x13c) from [<c0428040>] (usb_register_driver+0x78/0x13c)
[ 5.238464] [<c0428040>] (usb_register_driver+0x78/0x13c) from [<c005b680>] (do_one_initcall+0x34/0x188)
[ 5.238494] [<c005b680>] (do_one_initcall+0x34/0x188) from [<c00e11f0>] (sys_init_module+0xb0/0x1c0)
[ 5.238525] [<c00e11f0>] (sys_init_module+0xb0/0x1c0) from [<c0065c40>] (ret_fast_syscall+0x0/0x30)
Move the two offenders to the private structure which is kmalloc-ed,
and thus safe.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
bonding: enable netpoll without checking link status
xfrm: Refcount destination entry on xfrm_lookup
net: introduce rx_handler results and logic around that
bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
bonding: wrap slave state work
net: get rid of multiple bond-related netdevice->priv_flags
bonding: register slave pointer for rx_handler
be2net: Bump up the version number
be2net: Copyright notice change. Update to Emulex instead of ServerEngines
e1000e: fix kconfig for crc32 dependency
netfilter ebtables: fix xt_AUDIT to work with ebtables
xen network backend driver
bonding: Improve syslog message at device creation time
bonding: Call netif_carrier_off after register_netdevice
bonding: Incorrect TX queue offset
net_sched: fix ip_tos2prio
xfrm: fix __xfrm_route_forward()
be2net: Fix UDP packet detected status in RX compl
Phonet: fix aligned-mode pipe socket buffer header reserve
netxen: support for GbE port settings
...
Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
pch_uart: reference clock on CM-iTC
pch_phub: add new device ML7213
n_gsm: fix UIH control byte : P bit should be 0
n_gsm: add a documentation
serial: msm_serial_hs: Add MSM high speed UART driver
tty_audit: fix tty_audit_add_data live lock on audit disabled
tty: move cd1865.h to drivers/staging/tty/
Staging: tty: fix build with epca.c driver
pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
Staging: generic_serial: fix double locking bug
nozomi: don't use flush_scheduled_work()
tty/serial: Relax the device_type restriction from of_serial
MAINTAINERS: Update HVC file patterns
tty: phase out of ioctl file pointer for tty3270 as well
tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
pch_uart: Fix DMA channel miss-setting issue.
pch_uart: fix exclusive access issue
pch_uart: fix auto flow control miss-setting issue
pch_uart: fix uart clock setting issue
pch_uart : Use dev_xxx not pr_xxx
...
Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)
|
|
Currently, for N 5800 XM I get:
cdc_phonet: probe of 1-6:1.10 failed with error -22
It's because phonet_header is empty. Extra altsetting looks like
there:
E 05 24 00 01 10 03 24 ab 05 24 06 0a 0b 04 24 fd .$....$..$....$.
E 00 .
I don't see the header used anywhere so just check if the phonet
descriptor is there, not the structure itself.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently there is a warning emitted by the cdc-phonet driver:
WARNING: at include/linux/netdevice.h:1557 usbpn_probe+0x3bb/0x3f0 [cdc_phonet]()
Modules linked in: ...
Pid: 5877, comm: insmod Not tainted 2.6.37.3-16-desktop #1
Call Trace:
[<ffffffff810059b9>] dump_trace+0x79/0x340
[<ffffffff81520fdc>] dump_stack+0x69/0x6f
[<ffffffff810580eb>] warn_slowpath_common+0x7b/0xc0
[<ffffffffa00254fb>] usbpn_probe+0x3bb/0x3f0 [cdc_phonet]
...
---[ end trace f5d3e02908603ab4 ]---
netif_stop_queue() cannot be called before register_netdev()
So remove netif_stop_queue from the probe funtction to avoid that.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This was to resolve a merge issue with drivers/char/Makefile and
drivers/tty/serial/68328serial.c
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The device is very similar to (0x0fe6, 0x8101),
And works well with dm9601 driver.
Signed-off-by: Shahar Havivi <shaharh@redhat.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only oddities here are a couple of drivers that bogusly called the ldisc
helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes
away.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Doing tiocmget was such fun we should do tiocmset as well for the same
reasons
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
We don't actually need this and it causes problems for internal use of
this functionality. Currently there is a single use of the FILE * pointer.
That is the serial core which uses it to check tty_hung_up_p. However if
that is true then IO_ERROR is also already set so the check may be removed.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
In drivers/net/usb/hso.c::hso_create_bulk_serial_device() we have this
code:
...
serial = kzalloc(sizeof(*serial), GFP_KERNEL);
if (!serial)
goto exit;
...
exit:
hso_free_tiomget(serial);
...
hso_free_tiomget() directly dereferences its argument, which in the
example above is a NULL pointer, ouch.
I could just add a 'if (serial)' test at the 'exit' label, but since most
freeing functions in the kernel accept NULL pointers (and it seems like
this was also assumed here) I opted to instead change 'hso_free_tiomget()'
so that it is safe to call it with a NULL argument. I also modified the
function to get rid of a pointles conditional before the call to
'usb_free_urb()' since that function already tests for NULL itself -
besides fixing the NULL deref this change also buys us a few bytes in
size.
Before:
$ size drivers/net/usb/hso.o
text data bss dec hex filename
32200 592 9960 42752 a700 drivers/net/usb/hso.o
After:
$ size drivers/net/usb/hso.o
text data bss dec hex filename
32196 592 9960 42748 a6fc drivers/net/usb/hso.o
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
returns less than zero in kevent().
We'll leak the memory allocated to 'urb' in
drivers/net/usb/usbnet.c:kevent() when we 'goto fail_lowmem' and the 'urb'
variable goes out of scope while still completely unused.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Specification links:
- CDC NCM errata link:
http://www.usb.org/developers/devclass_docs/NCM10_012011.zip
- CDC and WMC errata link:
http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip
Changes:
- driver updated to match cdc.h header with errata changes
- added support for USB_CDC_SET_NTB_INPUT_SIZE control request with
8 byte length
- fixes to comply with specification: send only control requests supported by
device, set number of datagrams for IN direction, connection speed structure
update, etc.
- packet loss fixed for tx direction; misleading flag renamed.
- adjusted hard_mtu value.
Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We will leak the storage allocated by request_firmware() if the size of
the firmware is greater than KAWETH_FIRMWARE_BUF_SIZE.
This removes the leak by calling release_firmware() before we return
-ENOSPC.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- tx_fixup() can be called from either timer callback or from xmit()
in usbnet, so spinlock is added to avoid concurrency-related problem.
- minor correction due to checkpatch warning for some line over 80
chars after previous patch was applied.
Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
uninitialized variable.
skb_clone() dynamically allocates memory and may fail. If it does it
returns NULL. This means we'll dereference a NULL pointer in
drivers/net/usb/cdc_ncm.c::cdc_ncm_rx_fixup().
As far as I can tell, the proper way to deal with this is simply to goto
the error label.
Furthermore gcc complains that 'skb' may be used uninitialized:
drivers/net/usb/cdc_ncm.c: In function ‘cdc_ncm_rx_fixup’:
drivers/net/usb/cdc_ncm.c:922:18: warning: ‘skb’ may be used uninitialized in this function
and I believe it is right. On the line where we
pr_debug("invalid frame detected (ignored)" ...
we are using the local variable 'skb' but nothing has ever been assigned
to that variable yet. I believe the correct fix for that is to use
'skb_in' instead.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We already verified that "dev->udev->actconfig->extralen" was non-zero
so "len" is non-zero here as well.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
net/ipv4/fib_frontend.c
|
|
The original code returns 0 on success and 1 on failure. In fact, at
this point, "ret" is already either zero or a negative error code so
we can just return it directly.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
