summaryrefslogtreecommitdiffstats
path: root/drivers/net/wimax/i2400m
AgeCommit message (Expand)Author
2009-10-19wimax/iwmc3200: add new sdio device ID to support iwmc3200 2.5GHz skuCindy H Kao
2009-10-19wimax/i2400m: on firmware upload, select BCF header that matches device's req...Inaky Perez-Gonzalez
2009-10-19wimax/i2400m: support extended firmware formatInaky Perez-Gonzalez
2009-10-19wimax/i2400m: verify firmware format version is knownInaky Perez-Gonzalez
2009-10-19wimax/i2400m: fix reboot echo/ack barker deadlockInaky Perez-Gonzalez
2009-10-19wimax/i2400m: retry loading firmware files in sequenceInaky Perez-Gonzalez
2009-10-19wimax/i2400m: rework bootrom initialization to be more flexibleInaky Perez-Gonzalez
2009-10-19wimax/i2400m: decide properly if using signed vs non-signed firmware loadingInaky Perez-Gonzalez
2009-10-19wimax/i2400m: workaround not-so-working %zd printf formatInaky Perez-Gonzalez
2009-10-19wimax: allow specifying debug levels as command line optionInaky Perez-Gonzalez
2009-10-19wimax/i2400m: add missing debug submodule definitionInaky Perez-Gonzalez
2009-10-19wimax/i2400m: during probe, call sdio_disable at most onceInaky Perez-Gonzalez
2009-10-19wimax/i2400m: don't write to memory allocated by request_firmware()Cindy H Kao
2009-10-19wimax/i2400m: be smarter about copying command buffer to bm_cmd_bufInaky Perez-Gonzalez
2009-10-19wimax/i2400m/sdio: clear the INTR status bit after reading sizeCindy H Kao
2009-10-19wimax/i2400m: USB driver uses a configurable endpoint mapDirk Brandewie
2009-10-19wimax/iwmc3200: increase wait time before enable retryCindy H Kao
2009-10-19wimax/iwmc3200: don't disable the SDIO function if enable failsCindy H Kao
2009-10-19wimax/iwmc3200: overwrite SDIO IOR timeout value to avoid platform hangCindy H Kao
2009-10-19wimax/i2400m: Make boot retries a BUS-specific parameterDirk Brandewie
2009-10-19wimax/i2400m: Ensure boot mode cmd and ack buffers are alloc'd before first m...Dirk Brandewie
2009-10-19wimax/i2400m: Update comments to talk about SDIO reset and not USB.Dirk Brandewie
2009-10-19i2400m: minimal ethtool supportDan Williams
2009-10-19wimax: misplaced parenthesisRoel Kluin
2009-10-19i2400m: keep index within ms_to_errno[]Roel Kluin
2009-10-19wimax/i2400m: fix the bootmode RX deadlock in SDIO driverCindy H Kao
2009-10-19wimax/i2400m/usb: remove unnecessary power management primitive in i2400mOliver Neukum
2009-09-11net: Add DEVTYPE support for Ethernet based devicesMarcel Holtmann
2009-09-01wireless: convert drivers to netdev_tx_tStephen Hemminger
2009-07-26imwc3200: move iwmc3200 SDIO ids to sdio_ids.hTomas Winkler
2009-06-15debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.GeunSik Lim
2009-06-11wimax: fix gcc warnings in sh4 when calling BUG()Inaky Perez-Gonzalez
2009-06-11wimax/i2400m: use -EL3RST to indicate device reset instead of -ERESTARTSYSCindy H Kao
2009-06-11wimax/i2400m: when bootstrap fails, reinitialize the bootromCindy H Kao
2009-06-11wimax/i2400m/sdio: Move all the RX code to a unified, IRQ based receive routineInaky Perez-Gonzalez
2009-06-11wimax/i2400m: don't reset device when bootrom init retries are exceededInaky Perez-Gonzalez
2009-06-11wimax/i2400m/sdio: Add device specific poke table.Dirk Brandewie
2009-06-11wimax/i2400m: move boot time poke table out of common driverDirk Brandewie
2009-06-11wimax/i2400m: Allow bus-specific driver to specify retry countInaky Perez-Gonzalez
2009-06-11wimax/i2400m: if a device reboot happens during probe, handle itInaky Perez-Gonzalez
2009-06-11wimax/i2400m: fix oops when the TX FIFO fills up due to a missing checkInaky Perez-Gonzalez
2009-06-11wimax/i2400m: don't reset device on i2400m_dev_shutdown()Inaky Perez-Gonzalez
2009-06-11wimax/i2400m: fix panic due to missed corner cases on tail_room calculationInaky Perez-Gonzalez
2009-06-11wimax/i2400m: fix panic/warnings caused by missed check on empty TX messageInaky Perez-Gonzalez
2009-06-11wimax/i2400m: rename misleading I2400M_PL_PAD to I2400M_PL_ALIGNInaky Perez-Gonzalez
2009-06-11wimax/i2400m/sdio: Implement I2400M_RT_BUS reset typeDirk Brandewie
2009-06-11wimax/i2400m: Change d_printf() level for secure boot messagesDirk Brandewie
2009-06-11wimax/i2400m: i2400m_schedule_work() doesn't need i2400m->work_queueInaky Perez-Gonzalez
2009-06-11wimax/i2400m: i2400m's work queue should be initialized before RX supportInaky Perez-Gonzalez
2009-06-11wimax/i2400m: don't call netif_start_queue() in _tx_msg_sent()Inaky Perez-Gonzalez