summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath5k
AgeCommit message (Collapse)Author
2009-03-16ath5k: update LED table with reported devicesBob Copeland
This patch adds support for Acer Ferrari 5000, and also specifies the subsystem device ids for previously reported e-machines e510 and Acer Aspire One A150. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: use a table for LED parametersBob Copeland
Put the device id-to-gpio mapping in a table to make it easier to add new devices. The list of supported devices is unchanged. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: extract LED code into a separate fileBob Copeland
Move LED code out of base.c for clarity. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: don't change mac in eeprom_read_mac on errorJiri Slaby
Do not touch mac parameter passed to ath5k_eeprom_read_mac unless we are sure we have correct address. I.e. when returning error, do not change it. While at it, use '= {}' compiler trick for memsetting mac_d. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: constify stuffJiri Slaby
Make some structures const to place them in .rodata, since we won't change them. Most important parts of objdump -h: - 0 .text 00011170 + 0 .text 00011140 - 5 .rodata 0000828e + 5 .rodata 0000895e - 13 .data 00000560 + 13 .data 00000110 - 14 .devinit.data 00000260 Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath5k: Set TSF fixAlina Friedrichsen
The old code doesn't work correctly e.g. on newer chipsets like AR5418+AR2122 and AR5416+AR2133. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath5k: fix hw rate index conditionJiri Slaby
Make sure we print out a warning when the index is out of bounds, i.e. even on hw_rix == AR5K_MAX_RATES. Also change to WARN and print text with the reported hw_rix. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: compute rts/cts duration after computing full pktlenBob Copeland
RTS and CTS-to-self duration needs to go after ICV len is considered. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: move beacon processing to a taskletBob Copeland
We currently send beacons directly from the interrupt routine. This can hold up interrupt processing in beaconing modes and makes the ISR somewhat more complex. Move it to a tasklet like rx and tx. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: use spin_lock_irqsave for beacon lockBob Copeland
ath5k_reset can be called from process context, which in turn can call ath5k_beacon_config which takes the sc->block spinlock. Since it can also be taken in hard irq context, use spin_lock_irqsave everywhere. This fixes a potential deadlock in adhoc mode. Changes-licensed-under: 3-Clause-BSD Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: don't mask off interrupt bitsBob Copeland
Since interrupts are already masked by the hardware, there's no need to discard interrupt bits in the ISR itself. Also, in ath5k_beacon_config we mask off a couple of bits without locking, so doing this mask in software can lead to unhandled beacon timer and beacon miss interrupts. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Don't call reset on config_interfaceNick Kossifidis
* We call reset too often and this can result various PHY problems. On config_interface we don't need to reset the whole device. TODO: Create a function hw_fast_reset that only resets the PCU (tx/rx stuff) and not the whole device so that we can use this for stuck beacons etc. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Disable BMISS interruptsNick Kossifidis
* Don't enable BMISS interrupts as we don't handle them yet Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Update reset codeNick Kossifidis
* Update reset and sync with HALs * Clean up eeprom settings and tweaking of initvals and put them on separate functions * Set/Restore 32KHz ref clk operation * Add some more documentation TODO: Spur mitigation, tpc, half/quarter rate, compression etc v2: Address comments from Bob and Felix and fix RSSI threshold bug introduced on the first version of the patch Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Update initvalsNick Kossifidis
* Update initvals to match legacy and Sam's HAL Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Update RF Buffer handlingNick Kossifidis
* Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Update gain_F calibration code and add documentationNick Kossifidis
* Update and cleanup rf gain optimization code * Add comments and refferences to docs and use sane function names * Use only step index on ath5k_gain, no need to have a pointer to the current step since we can determine te step from it's index, this also allows us to put all other structs on rfgain.h and cleanup ath5k.h a little * No need for ah_rfgain variable, we use ah_gain.g_state for everything * Tested on RF2112B chip but gain_F calibration is not yet done (we will finish this on the next patch where we'll rewrite rf-buffer handling) * Use initial rf gain settings for 2316 and 2317 SoCs introduced on a previous patch It seems big but it's mostly cleanup, very few functional changes have been made on phy.c Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: PHY code cleanupNick Kossifidis
* Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath5k: properly free rx dma descriptorsFelix Fietkau
When freeing rx dma descriptors, use the right buffer size. Fixes kernel oopses on module unload on ixp4xx and most likely other platforms as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-01-30Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e1000/e1000_main.c
2009-01-29ath5k: fix locking in ath5k_configBob Copeland
ath5k_config updates the software context without taking sc->lock. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: support LED's on emachines E510 notebookTulio Magno Quites Machado Filho
Add vendor ID for AMBIT and use it to set the ath5k LED gpio. base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: Generic TSF debuggingAlina Friedrichsen
This patch enables low-level driver independent debugging of the TSF and remove the driver specific things of ath5k and ath9k from the debugfs. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: Read and write the TSF via debugfsAlina Friedrichsen
This patch updates the ath5k specific entry in the debugfs to read and reset the TSF value, to allowing write it, too. This makes debugging the IBSS handling of wifi drivers _much_ easier. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: honor the RTS/CTS bitsBob Copeland
The ath5k driver didn't use set_rts_threshold or use_cts_prot, and also didn't check the IEEE80211_TX_RC_USE_{RTS_CTS,CTS_PROTECT} RC flags. Tell the hardware about these so RTS/CTS will work, and so the device will work better in mixed b/g environments. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: use short preamble when possibleBob Copeland
ath5k previously ignored TX_RC_SHORT_PREAMBLE and did not use config->use_short_preamble, so the long preamble was always used for transmitted packets. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: remove unused led_off parameterBob Copeland
ath5k_softc->led_off hasn't been used since commit 3a078876caee9634dbb9b41e6269262e30e8b535, "convert LED code to use mac80211 triggers." Changes-licensed-under: 3-Clause-BSD Reported-by: Tobias Doerffel <tobias.doerffel@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: remove stop/start calls from within suspend/resumeBob Copeland
mac80211 now takes down interfaces automatically during suspend so doing it in the driver is unnecessary. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: notice a negative keytypeRoel Kluin
To notice a negative keytype Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: discard 11g caps if reported by an ar5211 eepromHelmut Schaa
At least one ar5211 card (GIGABYTE GN-WLMA101, 168c:0012 subsystem 1458:e800) reports itself as 11g capable which seems to be a bug in the eeprom. initvals.c assumes that ar5211 is only 11b capable and thus refuses to initialize this card. Hence this patch changes the probing for 11g capabilities to discard 11g capabilities for ar5211 cards which allows this specific card to work fine in 11b and 11a modes. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: fix bf->skb==NULL panic in ath5k_tasklet_rxBob Copeland
Under memory pressure, we may not be able to allocate a new skb for new packets. If the allocation fails, ath5k_tasklet_rx will exit but will leave a buffer in the list with a NULL skb, eventually triggering a BUG_ON. Extract the skb allocation from ath5k_rxbuf_setup() and change the tasklet to allocate the next skb before accepting a packet. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Use BIP (AES-128-CMAC)Jouni Malinen
Add mechanism for managing BIP keys (IGTK) and integrate BIP into the TX/RX paths. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: Minor QCU updatesNick Kossifidis
* Sync qcu.c with legacy-hal * Add some more comments * Set QCU mask to save power (QCU mask controls which QCUs are attached to each DCU, we do a 1:1 mapping) TODO: Use max QCU from EEPROM, further sync with legacy-hal and sam's hal and a few more minor fixes. I think after this we are ready to implement WME on the driver part. Anyone interested ? Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: fix off-by-one in gpio checksBob Copeland
Sanity checks against AR5K_NUM_GPIO were all broken. This doesn't currently cause any problems since we only use the first four gpios. Changes-licensed-under: ISC Reported-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: support LEDs on Acer Aspire One netbookBob Copeland
Add vendor ID for Foxconn and use it to set the ath5k LED gpio and polarity for Acer branded laptops. base.c: Changes-licensed-under: 3-Clause-BSD Reported-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: clean up set_key callbackJohannes Berg
The set_key callback now seems rather odd, passing a MAC address instead of a station struct, and a local address instead of a vif struct. Change that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Bob Copeland <me@bobcopeland.com> [ath5k] Acked-by: Ivo van Doorn <ivdoorn@gmail.com> [rt2x00] Acked-by: Christian Lamparter <chunkeey@web.de> [p54] Tested-by: Kalle Valo <kalle.valo@nokia.com> [iwl3945] Tested-by: Samuel Ortiz <samuel@sortiz.org> [iwl3945] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: More EEPROM code updatesNick Kossifidis
* Don't scale power values on RF5111 EEPROMs because they get out of bounds (power is u8, so multiplying power by 50 is too much and there is no reason to do so -we don't do it on other chips anyway-). HAL does it as a technique to handle 0.5 dbm steps but i believe it's not the right thing to do and certainly not the right place to do it. We 'll work this out on interpolation code for all chips (0.5 or 0.25 steps etc) in a generic way. Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: Update EEPROM codeNick Kossifidis
*Read misc2...6 values from eeprom since we want to use them (fixes wrong power calibration info offset on RF2413+ chips) *Initialize num_piers to 0 for RF2413 chips (note that we read 2GHz frequency piers while reading mode sections, we have to ignore them -usualy they are 0xff anyway but during my tests i got a 1 on b mode with no data- and use the newer eemap. *Add some more comments (please forgive my poor English ;-( ) and some minor code cleanup *Tested on 2425 and 2112 and has the same data with ath_info (i wrote some debug code on debug.c to print everything like ath_info but i haven't tested it yet on 5111 and it's full of > 80 col lines, if anyone wants to play with it let me know). Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-21net: constify VFTsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12ath5k: fix return values from ath5k_txBob Copeland
Should return NETDEV_TX_{OK,BUSY} instead of 0,-1 (this doesn't change any current functionality). Changes-licensed-under: 3-Clause-BSD Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath5k: Correct usage of AR5K_CFG_ADHOCSteve Brown
This corrects usage of AR5K_CFG_ADHOC introduced in "ath5k: Update PCU code". Also, the name of the indicator is changed to AR5K_CFG_IBSS to more accurately reflect its function. This change restores beaconing in AP and mesh modes. Signed-off-by: Steve Brown <sbrown@cortland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-08fix similar typos to successfullColy Li
When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by: Coly Li <coyli@suse.de> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-19ath5k: correct packet length in tx descriptorsBob Copeland
Packet length calculation (which includes frame check sequence) should take into account whether we add a pad field or not. Extract the calculation into a helper and use it in both places. Changes to desc.c Changes-licensed-under: ISC Changes to ath5k.h, base.c Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath5k: fix 802.11 header padding on RX, unpadding on TXBenoit PAPILLAULT
Padding the 802.11 header to a multiple of 4 bytes needs to be done only for frames with a body. This fixes a bug where 2 bytes were missing in monitor mode for ACK frames. Inspired by a patch from Jouni Malinen on ath9k. Ref: http://bugzilla.kernel.org/show_bug.cgi?id=12101 : Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath5k: fix endianness of bitwise ops when installing micBob Copeland
Fix these bugs found by sparse: ath5k/pcu.c:1102:21: warning: restricted __le32 degrades to integer ath5k/pcu.c:1102:13: warning: incorrect type in assignment (different base types) ath5k/pcu.c:1102:13: expected restricted __le32 <noident> ath5k/pcu.c:1102:13: got unsigned int ath5k/pcu.c:1104:20: warning: restricted __le32 degrades to integer ath5k/pcu.c:1104:13: warning: incorrect type in assignment (different base types) ath5k/pcu.c:1104:13: expected restricted __le32 <noident> ath5k/pcu.c:1104:13: got unsigned int Changes-licensed-under: ISC Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: enable combined michael mic in key cacheBob Copeland
For mac revisions >= "Griffin," the hardware allows the mic tx and rx authenticator keys to share the same cache line, whereas earlier hardware can only store the rx. Enable the combined mic on hardware that supports it. Changes to ath5k.h Changes-licensed-under: 3-Clause-BSD Changes to attach.c, pcu.c, reg.h Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: clean up ath5k_hw_set_keyBob Copeland
Status: O With the addition of TKIP (and soon CCMP), key->alg is a more useful guide to key type than the key length. This patch cleans up key type assignment in ath5k_hw_set_key by extracting it into its own function. It also replaces the separate memcpy() calls for extracting key material into the hardware format with a loop that works regardless of key size. Finally, the patch removes support for WEP-128 since it is a non-standard key length that mac80211 also doesn't use. Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: preserve higher order bits when setting mac addressBob Copeland
In some cases we would like to set the mac address without changing the operating mode. However, Atheros cards store PCU data in the high 16 bits of the mac address register. Change ath5k_hw_set_lladdr() to not clobber the PCU settings. Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 06:32:35 +0000