summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2012-10-08carl9170: fix sleep in softirq contextRonald Wahl
This patch fixes the following bug: usb 1-1.1: restart device (8) BUG: sleeping function called from invalid context at drivers/usb/core/urb.c:654 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper (usb_poison_urb+0x1c/0xf8) (usb_poison_anchored_urbs+0x48/0x78) (carl9170_usb_handle_tx_err+0x128/0x150) (carl9170_usb_reset+0xc/0x20) (carl9170_handle_command_response+0x298/0xea8) (carl9170_usb_tasklet+0x68/0x184) (tasklet_hi_action+0x84/0xdc) this only happens if the device is plugged in an USB port, the driver is loaded but inactive (e.g. the wlan interface is down). If the device is active everything is fine. Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08ath5k: fix potential NULL pointer dereference in ath5k_beacon_update()Wei Yongjun
The dereference should be moved below the NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-05ath9k: use ieee80211_free_txskbFelix Fietkau
Using ieee80211_free_txskb for tx frames is required, since mac80211 clones skbs for which socket tx status is requested. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-05ath9k: improve suspend/resume reliabilityFelix Fietkau
Ensure that drv_start() always returns true, as a failing hw start usually eventually leads to crashes when there's still a station entry present. Call a power-on reset after a resume and after a hw reset failure to bring the hardware back to life again. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-05ath9k: fix ASPM initialization on resumeFelix Fietkau
ath_pci_aspm_init is only called on card init, so PCI registers get reset after a suspend/resume cycle. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...
2012-10-01Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi) - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu) - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu) - Use standard list ops for acpi_pci_drivers (Jiang Liu) Device hotplug - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu) - Remove fakephp driver (Bjorn Helgaas) - Fix VGA ref count in hotplug remove path (Yinghai Lu) - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu) - Implement resume regardless of pciehp_force param (Oliver Neukum) - Make pci_fixup_irqs() work after init (Thierry Reding) Miscellaneous - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang) - Factor out PCI Express Capability accessors (Jiang Liu) - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan) - Make pci_error_handlers const (Stephen Hemminger) - Cleanup drivers/pci/remove.c (Bjorn Helgaas) - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas) - Use standard list ops for bus->devices (Bjorn Helgaas) - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang) - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)" * tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits) PCI: acpiphp: Handle PCIe ports without native hotplug capability PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots PCI/ACPI: Protect acpi_pci_roots list with mutex PCI/ACPI: Use acpi_pci_root info rather than looking it up again PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface PCI/ACPI: Protect acpi_pci_drivers list with mutex PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges PCI/ACPI: Use normal list for struct acpi_pci_driver PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots PCI: Fix default vga ref_count ia64/PCI: Clear host bridge aperture struct resource x86/PCI: Clear host bridge aperture struct resource PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()" PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions PCI: Use correct type when freeing bus resource list PCI: Check P2P bridge for invalid secondary/subordinate range PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() ...
2012-10-01Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-09-30Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Here is another batch of updates intended for 3.7... Highlights include an hci_connect re-write in Bluetooth, HCI/LLC layer separation in NFC, removal of the raw pn544 NFC driver, NFC LLCP raw sockets support, improved IBSS auth frame handling in mac80211, full-MAC AP mode notification support in mac80211, a lot of attention paid to brcmfmac, and the usual level of updates to iwlwifi, ath9k, mwifiex, and rt2x00, and various other updates. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28ath9k: Fix BTCOEX weight initializationSujith Manoharan
The WLAN/BT weights have to set correctly before BTCOEX is initialized. Currently, this is not done for all chips in the AR9003 family. This patch fixes this issue by setting the weights in the init path. While at it, rename ar9462_wlan_weights to mci_wlan_weights since it is common to both AR9462 and AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k_hw: Handle AR_INTR_SYNC_HOST1_(FATAL|PERR) on AR9003Sven Eckelmann
Interrupts with the sync_cause AR_INTR_SYNC_HOST1_FATAL and AR_INTR_SYNC_HOST1_PERR have to be handled using a chip reset. Otherwise a interrupt storm with unhandled interrupts will cause a hang or crash of the machine. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k: Enable MCI for AR9565Bala Shanmugam
Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k: Fix chainmask selection for AR9462Sujith Manoharan
Force chain 1 to be used for CCK rates since the target power table stored in EEPROM is too high to transmit with both chains. This is needed to avoid regulatory violation. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k: Add a debugfs file to adjust antenna diversitySujith Manoharan
Location: /<debugfs>/ieee80211/phy#/ath9k/diversity Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k: Handle errors properly in MCI initializationSujith Manoharan
The MCI initialization path has various points of failures, handle these to ensure that we bail out correctly in such cases. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k: Fix rx filtering issue for older chipsThomas Wagner
We need to have the promiscuous mode enabled for older chipsets so that the olderchips hardware does not filters out some valid/necessary frames that need to be sent to mac80211. Fix this by enabling promiscus mode for all the chipsets whose macversion <= AR9160 chipsets. This should fix https://bugzilla.kernel.org/show_bug.cgi?id=45591 shafi: made the fix generic by having the frame filtering disabled for chipsets older than AR9280. Cc: Javier Cardona <javier@cozybit.com> Signed-off-by: Thomas Wagner <Thomas.Wagner@hs-rm.de> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-25ath5k: add missing breaks in ath5k_hw_set_spur_mitigation_filterJohn W. Linville
https://bugzilla.kernel.org/show_bug.cgi?id=47681 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-25ath9k_hw: fix BT sleep state on chip wakeupRajkumar Manoharan
Whenever both WLAN and BT in/out sleep mode, sometimes WLAN is not able to take back the shared LNA control after resumes from sleep mode. The idea is that for WLAN to check if BT owns LNA control and BT is in sleep mode when WLAN just resumes from sleep mode. If the condition is true, do a BTCOEX_RC_WARM_RESET for WLAN to take back the control of shared LNA. Now the issue is the BT sleep value read from MCI register is overlooked by assigning u32 into u8. Hence the above condition never be met so that WLAN used to report beacon losses and frequent connection drops. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Tested-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-25ath9k: Disable ASPM only for AR9285Sujith Manoharan
Currently, ASPM is disabled for all WLAN+BT combo chipsets when BTCOEX is enabled. This is incorrect since the workaround is required only for WB195, which is a AR9285+AR3011 combo solution. Fix this by checking for the HW version when enabling the workaround. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Tested-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-25Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-09-24ath5k: disable HW crypto in management frameChun-Yeow Yeoh
Hardware support for MFP is not available in ath5k. Thus, this implementation allows the mac80211 stack to do the actuall crypto operation. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24carl9170: connect to 11w protected networksChristian Lamparter
Previously, it was not possible to connect to networks which requires 11w to be supported by the stations. While the documentation hints that there's some hardware support for offloading MFP "decryption", this simple implementation relies on the mac80211 stack to do the actual crypto operations. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: Enable WLAN RX diversity for AR9565Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: Add a module parameter to enable diversitySujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: Add a HW callback to set diversitySujith Manoharan
This patch adds a new callback to handle WLAN RX diversity for AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: Update AR9565 initvalsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: Add antenna diversity group for AR9565Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: Remove a couple of unused variablesSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: Remove redundant variable assignmentSujith Manoharan
Set main_gaintb and alt_gaintb once instead of zero'ing them in every case. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: Use HW cap ATH9K_HW_CAP_ANT_DIV_COMBSujith Manoharan
Instead of trying to determine whether antenna diversity is enabled by parsing eeprom data, use ATH9K_HW_CAP_ANT_DIV_COMB which is already filled at init time. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: update hw_timer_enabled to false when we stop generic timersMohammed Shafi Shajakhan
Update the 'hw_timer_enabled' to 'false' wherever we are stopping hardware generic timers, excecpt the case where we start them again immediately. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24wireless: ath9k-htc: fix possible use after freeMing Lei
Inside ath9k_hif_usb_firmware_fail(), the instance of 'struct struct hif_device_usb' may be freed by ath9k_hif_usb_disconnect() after complete(&hif_dev->fw_done); But 'hif_dev' is still accessed after the line code above is executed. This patch fixes the issue by not accessing 'hif_dev' after 'complete(&hif_dev->fw_done)' inside ath9k_hif_usb_firmware_fail(). Cc: ath9k-devel@lists.ath9k.org Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: fix queuing MCI work twiceRajkumar Manoharan
Right now MCI work is being queued twice by profile and status updation. Queue MCI work once when it is needed. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: fill led_pin before drv_startRajkumar Manoharan
Ensure that led pin is filled and set to OFF before starting the driver. With recent changes, drv_start is being called even before led_init is being completed. This is causing led is always OFF on driver load when the interface is UP. This patch splits the led init and fills the led pin before register hw. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: move coex param updation within mci workRajkumar Manoharan
Update all coex parameters in sigle place. So that we can avoid redoing the same operation in mutiple places and it eases debugging. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: flush bt profile whenever it is requestedRajkumar Manoharan
Before processing BT profiles or status messages, check whether it is requested to flush BT profile. Otherwise it might increase number of BT profiles that affects the WLAN performance. Also flush the profiles when MCI is recovering from broken rx. After flushing BT profiles, query BT topology to refetch them. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: fix ar9462 selfgen chainmaskRajkumar Manoharan
When the 9462 is operating in 2G mode and MCI is enabled then reduce the selfgen chain mask to chain 1. Otherwise poor performance was reported at short range at Rx side when COEX is enabled. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: move 2g5g switch before nfcal startRajkumar Manoharan
During fast channel change, perform 2g5g_switch before starting noisefloor calibration to avoid nfload timeout. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: Enable SGI correctlySujith Manoharan
Set the driver specific SGI flag based on the station's HT capabilities, otherwise rate control uses the wrong rate. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-09-19cfg80211: constify name parameter to add_virtual_intfJohannes Berg
The name can't be modified by the driver, make it const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-13Merge commit 'v3.6-rc5' into nextBjorn Helgaas
* commit 'v3.6-rc5': (1098 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ... Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/rapidio/devices/tsi721.c
2012-09-11ath9k: Choose correct LED pin for AR9565Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Rename antenna diversity macrosSujith Manoharan
The register macros for antenna diversity are common for AR9462 and AR9565, rename them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Handle gentimer termination properlySujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: add 8 points for 5G temp slopRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: use peak detection for 5GHzRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Wait BT calibration to completeRajkumar Manoharan
Whenever BT calibration requested, WLAN has to wait for the calibration to be completed. But right now we defer the waiting which might cause BT calibration to fail. Fix that. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Add PCI ID for AR9565Sujith Manoharan
Enable AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-26 16:51:09 +0000