summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/b43
AgeCommit message (Collapse)Author
2014-09-15b43: add support for setting the beacon listen intervalHauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: update some transmit header constantsHauke Mehrtens
Some constants were missing and are added now. The rate mode was renamed, at least the ucode in brcsmac uses 2 for HT rates (iee80211n) and the more recent ucodes are using 3 for VHT (ieee80211ac). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: add missing rateHauke Mehrtens
The OFDM reate 9MB was not set here Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: tell ucode the phy type and versionHauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: tell the ucode the mac capabilitiesHauke Mehrtens
This is based on code form brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: Implement PHY PLL resetRafał Miłecki
We should reset PLL after changing MAC frequency. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: HT-PHY: Update values for frequency calibrationRafał Miłecki
Previous values were extracted from MMIO dump of some old 5.x driver, new ones should improve calibration. This also adds values for 5 GHz. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: HT-PHY: Implement band switchingRafał Miłecki
It works pretty much the same way as in N-PHY. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11b43: HT-PHY: Set MAC frequency to correct valuesRafał Miłecki
I misunderstood original Broadcom comment and used wrong values. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11b43: HT-PHY: Complete radio init (add missing entries)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11b43: HT-PHY: Define some regs for 0x2059 radioRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11b43: HT-PHY: Move radio calibration to separated functionsRafał Miłecki
Also use b43_radio_wait_value to simplify the code and usleep_range when needed. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11b43: HT-PHY: Move radio preparation into init functionRafał Miłecki
Radio should be prepared only before initialization. We need this to be able to call b43_radio_2059_init conditionally (in the future). This also documents RF control register a bit. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25b43: N-PHY: support setting custom TX powerRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25b43: implement PPR (Power Per Rate) management/APIRafał Miłecki
Broadcom hardware supports auto-adjustment of TX power depending on the currently used rate. So far all calculations were handled without any helpers (API) using big arrays and magic offsets. It seems Broadcom recently decided to clean this up by developing PPR. Their wlc_ppr.h can be found in open parts of the SDK. As we plan to implement support for rate-based TX power it makes sense to also implement our version of PPR as well. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25b43: N-PHY: add RF power tables for radio 0x2057 revs 9 & 14Rafał Miłecki
Don't write them as we don't have gains configured correctly yet. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25b43: N-PHY: update rev3+ gain control workaroundsRafał Miłecki
This fixes workarounds on rev 6+ and cleans code slightly. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25b43: flush some writes on Broadcom MIPS SoCsRafał Miłecki
Access to PHY and radio registers is indirect on Broadcom hardware and it seems that addressing on some MIPS SoCs may require flushing. So far this problem was noticed on 0x4716 SoC only (marketing names: BCM4717, BCM4718). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25b43: don't duplicate common PHY read/write opsRafał Miłecki
Most of the PHYs use the same way of accessing registers, so move that code to the shared place. An exception is G-PHY which sometimes access A-PHY regs and requires special handling. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25b43: update flushing many writes performed in a rowRafał Miłecki
Flush radio writes as well and add some tiny optimizations (e.g. masksetting PHY reg involves reading it, so reset the counter). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31b43: N-PHY: fix "Data bus error" while working in 5 GHzRafał Miłecki
When switching from one 5 GHz channel to another 5 GHz channel we need to make sure BPHY is still in a reset. However to access BPHY register we have to switch to 2 GHz mode for a moment. Otherwise this may result in "Data bus error" (noticed by Hauke with BCM43224 connected to the SoC). Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31b43: update PHY descriptions in KconfigRafał Miłecki
Add lists of chipsets, so people can enable support for their device easier (at least after checking lspci). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-29b43: add support for BCM43131 chipset with N-PHY rev 17Rafał Miłecki
It contains radio 0x2057 rev 14 just like a BCM43217, so it doesn't require any magic. The main difference is that BCM4313 is 1x1:1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-23b43: enable 5 GHz support for N-PHY devicesRafał Miłecki
This has been tested on 14e4:4328 (BCM4321), 14e4:432b (BCM4322), 14e4:4353 (BCM43224) and 14e4:4359 (BCM43228) which is an almost complete list of 5 GHz capable device (only BCM43222 is missing). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-23b43: register limited amount of 5G channels for BCM43228Rafał Miłecki
We don't have all needed channel tables due to RE process for this device. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-23b43: N-PHY: don't calculate values for TSSI if we can't transmitRafał Miłecki
This process requires sending some sample tone, so make sure we're allowed to transmit first. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-23b43: report correct rate to mac80211 for 5 GHz packetsRafał Miłecki
So far we were assuming only A-PHY supports 5 GHz. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-23b43: N-PHY: fix rev7+ typos at random placesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22b43: extract one more radio parameter: versionRafał Miłecki
Some radios may share the same ID and revision but differ by a version. E.g. radio in BCM5357B0 is version 1 and requires specific handling. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22b43: enable radio 0x2057 rev 14 support (AKA BCM43217)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22b43: N-PHY: final fixes to rev7+ workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22b43: N-PHY: add rev7+ workarounds for radio revs 9 and 14Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22b43: N-PHY: allow applying separated workarounds per coreRafał Miłecki
Newer devices need different workarounds for cores 0 and 1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22b43: N-PHY: update generic rev7+ workaroundsRafał Miłecki
Add some missing ops and prepare for new devices support. This patch is a great stability improvement for BCM43217. Earlier Tenda W322E used to disconnect every 2 minutes (16 times over 30 minutes). With this fix I got it running for 4 hours (with iperf) without any disconnection. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22b43: N-PHY: update digital filters setupRafał Miłecki
This fixes handling channel 14 and adds code for BCM43217. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22b43: N-PHY: add helper for setting digital filtersRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18b43: N-PHY: update spur avoidance to support newer devicesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18b43: use one shared function for setting MAC frequencyRafał Miłecki
By the way add few chipsets that were tracked with "wl" dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18b43: N-PHY: set band on every channel switchRafał Miłecki
Seems to be required by some hardware, wl does it every time. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18b43: N-PHY: complete 0x2057 radio init calibrationRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18b43: N-PHY: add tables for radio 0x2057 rev 14Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18b43: N-PHY: fix channel switching with 2 GHz radio 0x2057Rafał Miłecki
Values were written to wrong registers. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: add missing TX gain table for radio 0x2057 rev 5Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: don't warn about no 5 GHz support on 2.4 GHz devicesRafał Miłecki
This could be a bit confusing to see warning about lacking support for 5 GHz band if your device supports 2.4 GHz only. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: enable radio 0x2057 rev 9 (AKA BCM43228) supportRafał Miłecki
Support for N-PHY rev 8 with 0x2057 rev 5 is almost ready, but we still need to figure out how to handle rev 9 first. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: implement channel switching of radio 0x2057 rev 5Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: init and channel switching of radio 0x2057 rev 9Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43; N-PHY: write most of the missing code for revs 7+Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: add placeholders for new devices supportRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: add TX gain tables for devices with specific EPARafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 21:57:18 +0000