summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/b43
AgeCommit message (Collapse)Author
2011-06-29b43: HT-PHY: correct 0x2059 radio initRafał Miłecki
Sometimes additional steps are performed while initializing 2059 radio. We did not find the condition yet, so make it always true for now. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: basic PHY initRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: add init tablesRafał Miłecki
They were written from observing MMIO writes to registers 0x72 0x74 and 0x73 right after phy_write(0x017e) <- 0x3830 which finishes chennel switching. RegExps were used to translate writes to arrays. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: init radio when enabling itRafał Miłecki
Masks and sets were found in MMIO dumps by using MMIO hacks. Shortly: radio_write(0x0c51) <- 0x0070 radio_write(0x0c5a) <- 0x0003 radio_write(0x0146) <- 0x0003 radio_write(0x0546) <- 0x0003 radio_write(0x0946) <- 0x0003 radio_write(0x002e) <- 0x0078 radio_write(0x00c0) <- 0x0080 radio_write(0x002e) <- 0xff87 radio_write(0x00c0) <- 0xff7f radio_write(0x0011) <- 0xfff7 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: replace radio routing magic numbersRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: implement lacking 0x908 PHY reg opRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: add channel switching tables for 2 GHz bandRafał Miłecki
Tables were taken from observing writes in MMIO dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: perform some tables ops on channel switchingRafał Miłecki
Starring at MMIO dumps around PHY channel switching has led to finding serie of 3 similar ops this patch implements. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: upload PHY values when switching channelRafał Miłecki
After calibrating radio you can find few PHY writes in MMIO dumps: phy_read(0x0009) -> 0x0000 phy_write(0x01ce) <- 0x03dd phy_write(0x01cf) <- 0x03d9 phy_write(0x01d0) <- 0x03d5 phy_write(0x01d1) <- 0x0424 phy_write(0x01d2) <- 0x0429 phy_write(0x01d3) <- 0x042d By comparing to N-PHY code we found out that they are PHY tables for channel switching plus band info read at the beginning. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: prepare place for HT-PHY tablesRafał Miłecki
They are big arrays uploaded to the hardware on init, calibration, etc. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ssb: add __devinit to some functionsHauke Mehrtens
Two functions in ssb are using register_pci_controller() which is __devinit. The functions ssb_pcicore_init_hostmode() and ssb_gige_probe() should also be __devinit. This fixes the following warning: WARNING: vmlinux.o(.text+0x2727b8): Section mismatch in reference from the function ssb_pcicore_init_hostmode() to the function .devinit.text:register_pci_controller() The function ssb_pcicore_init_hostmode() references the function __devinit register_pci_controller(). This is often because ssb_pcicore_init_hostmode lacks a __devinit annotation or the annotation of register_pci_controller is wrong. WARNING: vmlinux.o(.text+0x273398): Section mismatch in reference from the function ssb_gige_probe() to the function .devinit.text:register_pci_controller() The function ssb_gige_probe() references the function __devinit register_pci_controller(). This is often because ssb_gige_probe lacks a __devinit annotation or the annotation of register_pci_controller is wrong. Reported-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22b43: HT-PHY: calibrate radio after switching channelRafał Miłecki
After uploading radio values calibration goes in. In MMIO dump it is: radio_read(0x002b) -> 0x0008 radio_write(0x002b) <- 0x0008 radio_read(0x002e) -> 0x0004 radio_write(0x002e) <- 0x0000 radio_read(0x002e) -> 0x0000 radio_write(0x002e) <- 0x0004 radio_read(0x002b) -> 0x0008 radio_write(0x002b) <- 0x0009 To find masks and sets, MMIO hacks were used to fool closed driver. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22b43: N-PHY: move declarations of chantables functions to correct filesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22b43: N-PHY: update switching analog on/offRafał Miłecki
Specs were recently updated. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22b43: HT-PHY: switch radio to requested channelRafał Miłecki
Switching channel happens after specific SHM write to B43_SHM_SH_CHAN. This is the way we found it in BCM4331 MMIO dumps. By comparing with N-PHY code we noticed there is routing used for SYN and TX/RX. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22b43: HT-PHY: add place for implementing channel switchingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22b43: HT-PHY: define standard structs for channel switchingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22b43: HT-PHY: enable radioRafał Miłecki
The trick was to find 0x810 PHY reg ops close to analog enabling code. To find out proper masks and sets, MMIO hacks were used. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22b43: HT-PHY: implement killing radioRafał Miłecki
Closed drivers kill radio right after reading radio version and MACCTL, so it was easy to find related PHY ops: phy_read(0x0810) -> 0x0000 phy_write(0x0810) <- 0x0000 To find out the mask of above OP, MMIO hack was used to fake read val: phy_read(0x0810) -> 0xffff phy_write(0x0810) <- 0x0000 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17b43: HT-PHY: implement switching analogRafał Miłecki
Turning it on is always done between reading PHY version and radio version, so it was easy to find it in MMIO dumps from ndiswrapper. Turning off is done by writing different values to the same registers. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17b43: HT-PHY: implement radio opsRafał Miłecki
Every PHY has some specific bit used for reading radio regs. Analyze of MMIO dumps from BCM4331 and ndiswrapper has shown it is 0x200 for HT. radio_read(0x037f) -> 0x0073 radio_write(0x017f) <- 0x0072 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17b43: add Kconfig option for compiling SSB driverRafał Miłecki
It is always "y" for now, b43 will not compile without CONFIG_SSB yet. This is just a first step of dropping SSB dependency. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17b43: HT-PHY: add place for writing HT PHY supportRafał Miłecki
This is totally broken plus we do not have specs for HT PHY yet. Just introduce place for writing driver if we discover anything. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17b43: define new PHYs and radio regs for cores >= 24Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-10b43: check for allocation failuresDan Carpenter
Add some error handling if the allocation fails. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03b43: add BCMA 80211 core specific definesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03b43: add an option to register BROKEN bcma driverRafał Miłecki
It does nothing useful yet, so it is matched as BROKEN. For now this is just an option for b43, in future we may want to make b43 support SSB or BCMA (note: or, not xor). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03b43: do not use SSB specific flags when calling core reset functionRafał Miłecki
Luckily the only flag we use when calling core reset is GMODE one. Thanks to that we can just switch to single bool and make function calls bus generic. Tested on my BCM4312 (LP-PHY) and early tested with BCM43224. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: Fix warnings from gcc 4.6.0Larry Finger
gcc 4.6.0 warnings for b43: CC [M] drivers/net/wireless/b43/lo.o drivers/net/wireless/b43/lo.c: In function ‘lo_measure_gain_values’: drivers/net/wireless/b43/lo.c:304:7: warning: variable ‘trsw_rx’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/b43/dma.o drivers/net/wireless/b43/dma.c: In function ‘free_all_descbuffers’: drivers/net/wireless/b43/dma.c:760:30: warning: variable ‘desc’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/b43/dma.c: In function ‘b43_dma_handle_txstatus’: drivers/net/wireless/b43/dma.c:1391:30: warning: variable ‘desc’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: add helpers for checking host typeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: use new pointers path to access ssb_device in SSB specific placesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: SDIO: use new pointers path to access ssb_deviceRafał Miłecki
SDIO code is SSB specific, we can safely just use "sdev" Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: LP-PHY: use new pointers path to access ssb_deviceRafał Miłecki
LP-PHY code is SSB specific, add check for bus type. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract bus and core operationsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract board infoRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract chip infoRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract device structs and irqRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract SPROMRafał Miłecki
SPROM is another frequently used struct. We decided to share SPROM struct between ssb na bcma as long as we will not need any hacks. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract 80211 core infoRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract R/W operationsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: add bus device abstraction layerRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: rename ssb_device variable in ssb specific functionsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-27Merge ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-05-26b43: N-PHY: initialize last var in calibration functionRafał Miłecki
Reported-by: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-25Merge branch 'for-davem' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-05-24Merge ↵John W. Linville
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
2011-05-23b43: fix comment typo reqest -> requestJim Cromie
Recent trivial fix corrected 'occured', but left 'reqest'. codespell needs another dictionary entry. cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-19b43: read PHY info only when needed (for PHY-A)Rafał Miłecki
We risk reading TMSHIGH register twice, but PHY-A are really rare and we do not support them at the moment. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19b43: separate ssb core resetRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-27 11:07:42 +0000