summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-6000.c
AgeCommit message (Collapse)Author
2014-04-13iwlwifi: don't disable SCD chain extension on newer devicesEmmanuel Grumbach
7000 device series have a fix for this hardware feature. Stop disabling it, and get an improvement in Tx throughput. This feature allows the scheduler to fetch more frames on the fly while an A-MPDU is being built - which means that we can get larger A-MPDU. This, of course, give an improvement in the Tx throughput. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: Update Copyright to 2014Emmanuel Grumbach
Happy new year! Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-02iwlwifi: pcie: add SKUs for 6000, 6005 and 6235 seriesEmmanuel Grumbach
Add some new PCI IDs to the table for 6000, 6005 and 6235 series. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27iwlwifi: move some configuration parameters into DVMJohannes Berg
There are a number of parameters that aren't really hardware specific but rather define how the DVM firmware is used. Move these into the DVM configuration. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: make device configuration bus agnosticEmmanuel Grumbach
Newer devices can work on different buses. This means that their configuration can be shared between different buses. Hence the configuration structures should exported to all the buses and not only to PCIE. Change this. Note that this requires all the fields to be the same amongst the buses. If differences will appear, we can always define a part that is bus dependent. Today, this is not needed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: move PCIe into subdirectoryJohannes Berg
Structure the code a bit more and move all PCIe code including the hardware configuration files into a PCIe specific subdirectory. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-05-25iwlwifi: do not use shadow registers by defaultMeenakshi Venkataraman
Shadow registers in the device are meant to allow the driver to update certain device registers without needing to wake up all components of the device. However, using this feature in the device causes communication between the driver and the device to become unreliable, resulting in host command timeouts. Disable this feature by default till a fix is available for the bug. Cc: stable@vger.kernel.org #2.6.38+ Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/intel/e1000e/param.c drivers/net/wireless/iwlwifi/iwl-agn-rx.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c drivers/net/wireless/iwlwifi/iwl-trans.h Resolved the iwlwifi conflict with mainline using 3-way diff posted by John Linville and Stephen Rothwell. In 'net' we added a bug fix to make iwlwifi report a more accurate skb->truesize but this conflicted with RX path changes that happened meanwhile in net-next. In e1000e a conflict arose in the validation code for settings of adapter->itr. 'net-next' had more sophisticated logic so that logic was used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-27iwlwifi: use 6000G2B for 6030 device seriesWey-Yi Guy
"iwlwifi: use correct released ucode version" change the ucode api ok from 6000G2 to 6000G2B, but it shall belong to 6030 device series, not the 6005 device series. Fix it Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-24iwlwifi: use correct released ucode versionMeenakshi Venkataraman
Report correctly the latest released version of the iwlwifi firmware for all iwlwifi-supported devices. Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23iwlwifi: clean up some hw file includesJohannes Berg
We can't get rid of everything yet due to the BT definitions that I'm not quite sure yet how to handle, but we can get rid of most unneeded includes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-23iwlwifi: move eeprom versions to HW filesJohannes Berg
The hardware files belong to the core PCI functionality, but the eeprom header file mixes higher-level functionality and the defines, so move out the specific defines and put them into the appropriate HW files instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-12iwlwifi: dynamically determine lib_opsJohannes Berg
Having the pointer to lib_ops in the config makes it impossible to split the driver into different modules. Determine the ops based on the device family enumeration to get rid of the direct pointer. Also move all the opmode specific code from the iwl-[1256]000.c files into a new file iwl-agn-devices.c so that the former only have configuration data now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: introduce device family enumJohannes Berg
This will later be used to dynamically bind the configuration data for DVM and MVM. For now, we can use it to get rid of the additional_nic_config() hook. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: move eeprom into privJohannes Berg
The whole code around eeprom is distributed across whole bunch of different files, most of which belong to the to-be-DVM code. As a result, it is currently very hard to split out the EEPROM code to be generic. However, it is also quite unlikely that the current EEPROM code will be needed by the MVM code as that has different mechanisms to query the EEPROM (it does so through the uCode.) So, at least temporarily, move everything into priv. If it becomes necessary to use the code from MVM, we will have to split it out, but then it's also easier since we'll know what pieces we need. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: move hw_params into privJohannes Berg
The hw_params are mostly values that are derived from the actual hardware config. As such, while it is possible that MVM will require similar ones, it makes more sense -- at least for now -- to put them into the DVM struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move queue mapping out of transportJohannes Berg
The queue mapping is not only dynamic, it is also dependent on the uCode, as we can already see today with the dual-mode and non-dual-mode being different. Move the queue mapping out of the transport layer and let the higher layer manage it. Part of the transport configuration is how to set up the queues. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-09iwlwifi: fix the delta for remove max_txq_num patchWey-Yi Guy
BIg portion of "iwlwifi: remove max_txq_num from hw_params" was missing during merge, here is the fix for it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: remove unused max_nrg_cck from sensitivity and constifyJohannes Berg
The sensitivity parameters are never modified, so they should be const. Also remove the unused max_nrg_cck value to save some space. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: make EEPROM enhanced TX power a boolJohannes Berg
There's no need to carry around the function pointer when a boolean indicating that the EEPROM stores enhanced TX power information is sufficient. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: remove BT handlers from lib_opsJohannes Berg
There's no need to have operations for these as they simply depend on whether the device has built-in bluetooth, so just duplicate the information already there (whether bt_params is present or not). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: remove PA type configurationJohannes Berg
No need to have a special config variable for the PA type, we can just use the additional NIC config function to config the hardware correctly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: constify remaining config dataJohannes Berg
The HW configuration settings base_params, ht_params and bt_params all should be const, make it so. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: remove num_of_queues module parameterJohannes Berg
This is a hardware parameter, so it shouldn't be configurable by the user. Users can disable aggregation (which is the only thing affected) with 11n_disable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: add wrappers for command sendingJohannes Berg
Add wrappers to send commands from the DVM op-mode (which essentially consists of the current driver). This will allow us to move specific sanity checks there. Also, this removes iwl_trans_send_cmd_pdu() since that can now be taken care of in the DVM-specific wrapper. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: make config constJohannes Berg
Writing to the global config structures is always wrong. To protect against such mistakes in the future, mark them const. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: use valid TX/RX antenna from hw_paramsJohannes Berg
It's not really a good idea to write to the global static configuration. Use the valid TX/RX antenna information only from the HW params struct except in the case where the values from the config are used to override the values from the EEPROM. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27iwlwifi: update pci subsystem idWey-Yi Guy
Update the pci subsystem id and product name for 6005 series devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: SRAM size moves from hw_params to cfgEmmanuel Grumbach
This will allow to set the hw_params after we fetch the uCode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: iwl_set_hw_params returns always 0Emmanuel Grumbach
Remove the return value. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move bcast_sta_id init to common routineDon Fry
There is nothing device specific in the initialization of the bcast_sta_id so move it to the common inititalization routine. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: give trans to all the read / write functionsEmmanuel Grumbach
From now on, the transport layer in charge of providing access to the device. So change all the driver to give a pointer to the transport to all the low level functions that actually access the device. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-01-06iwlwifi: update CopyrightWey-Yi Guy
Update Copyright to 2012 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: Add official names for new devicesDon Fry
Replace the engineering names with the marketing names for the new devices. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: move iwl_cfg from iwl_priv to iwl_sharedDon Fry
Move the configuration pointer from the upper level iwl_priv to the lower level iwl_shared structure, with associated code fixes. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-08iwlwifi: move eeprom pointer from iwl_priv to iwl_sharedDon Fry
The eeprom image is a device level component, move from iwl_priv to iwl_shared, with associated code changes. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-11-25iwlagn: allow up to uCode API 6 for 6000 devicesJohannes Berg
Since the uCode hasn't been released (yet?), warn only if using older than API 4, but load anything up to API 6. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-11-25iwlagn: remove calibration knowledgeJohannes Berg
The init microcode knows very well which calibrations are required and sends us results for those that are. Consequently, we can just send all of those to the RT uCode again. The problem with having the driver know about this is that it is a uCode feature, not a hardware feature so the config is completely unsuitable. The only thing we need to check is whether the device needs crystal calibration or not, add a new parameter to the configuration for that. This makes new uCode work on 6000 series devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-11-11iwlwifi: remove un-supported SKUsWey-Yi Guy
BG only SKUs are no longer supported by 2000 and 1x5 series. Remove it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: move iwl_enable_rfkill_int and kill iwl-helpers.hEmmanuel Grumbach
Move iwl_enable_rfkill_int to iwl-core.h, and remove the empty iwl-helpers.h Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: remove 6000 hw headerJohannes Berg
The constants can be moved together with the similar ones for other devices and we can then remove the file. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: merge station management functionsWey-Yi Guy
After driver split, no need to separate station management functions in two files, merge it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: rename all the mac80211 callback functionsWey-Yi Guy
Use the same calling style for all the mac80211 callback functions Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: add "_d" sku to 6005 series of devicesWey-Yi Guy
Add additional sku to 6005 series of devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: kill hw_params.max_stationsEmmanuel Grumbach
Not needed since driver split. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19iwlagn: rename iwl-pci.h to iwl-cfg.hJohannes Berg
There's nothing PCI(E) specific in this file. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19iwlagn: replace beacon_time_fsf_bits variable with #defineDon Fry
All devices use the same value for beacon_time_tsf_bits. Use the #define Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19iwlagn: simplify chain_noise_num_beacons indirectionFry, Donald H
chain_noise_num_beacons is set and never changes. Use the #define rather than 3 levels of indirection. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: iwl-pci doesn't include iwl-dev any moreEmmanuel Grumbach
Move all the iwlXXX_abgn_cfg forward declaration to a separate file so that iwl-pci.c doesn't need to include iwl-agn.h that includes all iwl-dev.h This allows to provide real encapsulation. Dereferencing iwl_priv in the bus layer will now lead to a compilation error. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: all function iwl-io.c receive iwl_busEmmanuel Grumbach
Which means that iwl-io.c doesn't need to include iwl-dev.h any more. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-16 18:25:59 +0000