summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mwifiex
AgeCommit message (Collapse)Author
2011-10-17Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem
2011-10-14mwifiex: fix make namespacecheck warningsAmitkumar Karwar
This patch takes care of warnings found by running 'make namespacecheck': 1. Remove dead code. 2. Reorder function definitions to avoid forward declarations. 3. Remove unnecessary function/structure declarations and mark them as static. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14mwifiex: use separate wait condition for each command nodeAmitkumar Karwar
Currently global wait condition (adapter->cmd_wait_q.condition) is used while sending synchronous commands to FW. When two threads enter in mwifiex_send_cmd_sync() routine at the same time, both the threads wait for their command responses. Since wait condition is same for both, they wake up simultaneously after getting response of 1st command. After this when a thread is waiting for command response of 3rd command, it wakes up after getting response of 2nd command and so on. Therefore we don't wait for the response of last command(0xaa) during unload. Hence while next time loading the driver command time out is seen for INIT command. This problem is resolved by having separate wait condition flag for each command(except scan command). Since scan command is treated differently (by maintaining scan pending q etc.), newly defined flag (scan_wait_q_woken) is used as a scan wait condition. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mwifiex: add support for Marvell pcie8766 chipsetAmitkumar Karwar
This patch supports 88W8766P chipset with a PCIe interface. The corresponding firmware image file is located at: "mrvl/pcie8766_uapsta.bin" Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11mwifiex: fix smatch errorsYogesh Ashok Powar
drivers/net/wireless/mwifiex/main.c +828 mwifiex_remove_card(52) error: potential null derefence 'priv'. drivers/net/wireless/mwifiex/main.c +828 mwifiex_remove_card(52) error: we previously assumed 'priv' could be null (see line 820) drivers/net/wireless/mwifiex/txrx.c +90 mwifiex_process_tx(24) error: potential null derefence 'local_tx_pd'. drivers/net/wireless/mwifiex/sta_ioctl.c +766 mwifiex_rate_ioctl_set_rate_value(30) error: buffer overflow 'rate' 14 <= 14 Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem Conflicts: Documentation/feature-removal-schedule.txt
2011-10-03mwifiex: handle an error path correctlyAmitkumar Karwar
In failure case locks are not allocated in mwifiex_register(). So mwifiex_free_lock_list() routine call becomes redundant. Also we don't need to check return type for mwifiex_init_lock_list() routine. It never fails. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03mwifiex: correct AMSDU aggregation checkAmitkumar Karwar
The commit "mwifiex: remove list traversal.."(fcf2176c87..) wrongly modifies AMSDU aggregation check. Due to this even though packet size for iperf traffic is already large, we unnecessarily try to aggregate them which adds some delay. If Tx iperf is started on UUT for 30 seconds, UUT keeps sending Tx packets for few more seconds. That commit is reverted to fix the problem. Also, MIN_NUM_AMSDU check is moved inside the loop to optimize the loop. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: add cfg80211 handlers add/del_virtual_intfYogesh Ashok Powar
Making adding and deleting virtual interfaces dynamic. Adding handlers for creating and deleting virtual interface with given name and dev respectively. Also, creating default interface of type station on insmod of the driver. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: fix Tx data rate display issueAmitkumar Karwar
"iw dev mlan0 link" shows wrong data rate, because data rate is not sent properly to cfg80211 stack. Also stack is not updated with mcs and Tx data flags information. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: remove unreachable codeAmitkumar Karwar
In disconnected state "iw dev mlan0 link" command will return from cfg80211 stack itself. We also have an error check in mwifiex_cfg80211_get_station() routine. Therefore the code under "if (!priv->media_connected)" condition in mwifiex_rate_ioctl_get_rate_value() routine becomes unreachable. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mwifiex: remove unnecessary mwifiex_dump_station_info() callAmitkumar Karwar
An extra call to mwifiex_dump_station_info() routine in get_station callback function is redundant Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/wl12xx/main.c
2011-09-27mwifiex: reset skb length before inserting to free queueAmitkumar Karwar
After handling command response, cmd skb is inserted into command free queue(which keeps track of availabile skbs) for reuse purpose. Skb length is not getting reset to zero here. This patch takes care of it. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27mwifiex: pass correct band parameter to ieee80211_channel_to_frequency()Amitkumar Karwar
ieee80211_channel_to_frequency() routine expects band parameter in the form of "enum ieee80211_band band". Currently driver specific band (BAND_A, BAND_AN etc.) is passed to the routine. This patch makes sure that correct parameter is passed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27mwifiex: update bss band informationAmitkumar Karwar
In recent commit "mwifiex: use cfg80211 dynamic scan..." (7c6fa2a843..) scan table handling in driver is removed to make use of cfg80211 dynamic scan table. Now driver sends beacon buffers found in scanning directly to stack and parse the buffer for requested BSS only during association. Beacon buffer doesn't contain bss band information. Driver gets it from firmware in separate tlv (chan_band_tlv). Currently since we don't inform stack about bss bandinfo, there is an issue with 5GHz association. Use "priv" field of struct cfg80211_bss to store bandinfo. This fixes 5GHz association issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27mwifiex: fix 5GHz association issueAmitkumar Karwar
Sometimes association in 5GHz doesn't work. Dmesg log shows "Can not find requested SSID xyz" error message. Currently while preparing scan channel list for firmware Null entries are created for disabled channels. The routine which retrieves this list ignores channels after Null entry. Hence sometimes driver doesn't scan the channel of requested AP and association fails. The issue is fixed by avoiding those NULL entries. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-21mwifiex: remove unneeded NULL checkDan Carpenter
We dereference "rate" on the lines before so the checks here are too late to help. This function is only called from mwifiex_dump_station_info() and "rate" is always a non-NULL pointer so the check can be removed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-21mwifiex: add a kfree() to an error pathDan Carpenter
We're not likely to hit this small memory leak, but lets fix it anyway to keep the static checkers happy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19Merge branch 'master' of ssh://infradead/~/public_git/wireless-next into ↵John W. Linville
for-davem
2011-09-13mwifiex: replace kmalloc & memcpy sequence with kmemdupYogesh Ashok Powar
Sequence of kmalloc/kzalloc and memcpy is replaced with kmemdup. Cc: Walter Harms <wharms@bfs.de> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2011-08-24drivers/net/wireless/mwifiex/scan.c: test the just-initialized valueJulia Lawall
Test the just-initialized value rather than some other one. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier x,y,f!={PTR_ERR,ERR_PTR,ERR_CAST}; statement S; @@ x = f(...); ( if (\(x == NULL\|IS_ERR(x)\)) S | *if (\(y == NULL\|IS_ERR(y)\)) { ... when != x return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c drivers/staging/ath6kl/os/linux/ar6000_drv.c
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-12mwifiex: use cfg80211 dynamic scan table and cfg80211_get_bss APIAmitkumar Karwar
Instead of maintaining static scan table in driver, scan list is sent to cfg80211 stack (after parsing each scan command response). In assoc handler (for infra and ibss network) requested BSS information is retrieved using cfg80211_get_bss() API. With the changes above some redundant code are removed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09mwifiex: print driver version informationAmitkumar Karwar
Add code to display driver version information in dmesg after loading the driver successfully. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08mwifiex: remove redundant variable scan_table_idxBing Zhao
mwifiex_get_bss_info() routine updates variable 'info->scan_table_idx' but it is never used. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08mwifiex: remove wireless.h inclusion and fix resulting bugsBing Zhao
replace IW_MAX_AP & IW_CUSTOM_MAX with local definitions and remove usage of struct iw_statistics. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08mwifiex: add wext includeJohannes Berg
In trying to remove the wext includes from mac80211 and cfg80211 I found that mwifiex currently uses them. This is wrong, it shouldn't, but to not break it completely include wext there. Please remove this and fix all the resulting bugs. Cc: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-21mwifiex: disable auto deep sleep before unloading the driverAmitkumar Karwar
Since the auto deep sleep mode has been enabled at driver init time we should disable it at driver unloading to shutdown the function gracefully. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-21mwifiex: check SDIO multi-port aggregation buffer room correctlyAmitkumar Karwar
We should consider current packet length also while checking Tx aggregation buffer room. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-21mwifiex: put multicast/broadcast packets to the same RAAmitkumar Karwar
For ad-hoc mode, RA is created for each peer connected. In case of multicast traffic new RA will be created for each multicast address. While processing Tx packets we have to go through this RA list. We can avoid some RA nodes by sharing same RA for both multicast and broadcast packets. Therefore "memset(0xff)" is used to treat multicast packet as broadcast one while choosing RA. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20wireless: mwifiex: print hw address via %pMAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13mwifiex: add cfg80211 handler for set_bitrate_maskYogesh Ashok Powar
Currently, setting only legacy bitrates on 2.4GHz band are supported. Mode 802.11b/g/bg is enabled based on bitrates selection. If only CCK bitrates selected then 802.11b mode is enabled. If only OFDM bitrates are selected then 802.11g mode is enabled. For both: CCK and OFDM rates 802.11bg mixed mode is enabled. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11mwifiex: 11n specific configuration for transmitAmitkumar Karwar
Currently device is not able to transmit in 40MHz in spite of enabling 40MHz support in HTCapInfo IE in assoc req, because 11n specific FW capabilities for transmission are not initialized. This patch adds code to initilize these capabilities. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mwifiex: 4-byte alignment in mwifiex_process_sta_txpd()Yogesh Ashok Powar
In XMIT path, the skb that we get from the kernel itself is not aligned with 4-byte boundary on some embedded platforms. Had it not been the presence of tx_pkt_offset field in txpd, 4 byte memory alignment was not possible without memmove of entire skb. And that would have increased MIPS instead of reducing. With this patch few memory cycles can be saved while fetching interface header and txpd structure because of 4 bytes memory alignment. Reported-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mwifiex: fix minor issue in debugfs command 'info'Amitkumar Karwar
Debugfs command 'info' shows wrong interface type. The regression occurred due to commit eecd8250e (mwifiex: remove MWIFIEX_BSS_MODE_ macros) in which we replaced MWIFIEX_BSS_MODE_* macros by NL80211_IFTYPE_*, for example, MWIFIEX_BSS_MODE_IBSS (2) --> NL80211_IFTYPE_ADHOC (1) The issue is fixed by swapping static character array used to display interface type information. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mwifiex: fix regression in WEP security modeAmitkumar Karwar
Htcapinfo is unnecessarily sent in assoc request in WEP security due to a regression introduced by commit 2be50b8df53 (mwifiex: remove redundant encryption_mode mapping). The issue is fixed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-06mwifiex: modify SDIO aggregation Tx/Rx buffer sizeAmitkumar Karwar
The SDIO aggregation buffer size has been modified to an optimum value which gives good throughput results. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-tx.c
2011-06-27mwifiex: restore handling of NULL parametersDan Carpenter
Prior to a5ffddb70c5cab "mwifiex: remove casts of void pointers" the code assumed that the data_buf parameter could be a NULL pointer. The patch preserved some NULL checks but not consistently, so there was a potential for NULL dereferences and it changed the behavior. This patch restores the original behavior. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22mwifiex: remove casts of void pointersAmitkumar Karwar
In some cases local pointers are used to cast void pointers passed to the function. Those unnecessary local pointers are also removed. This patch was inspired by Joe Perches' patch [PATCH net-next 1/2] wireless: Remove casts of void *; and the comments from Julian Calaby. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Cc: Joe Perches <joe@perches.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-15mwifiex: Fixing NULL pointer dereferenceYogesh Ashok Powar
Following OOPS was seen when booting with card inserted BUG: unable to handle kernel NULL pointer dereference at 0000004c IP: [<f8b7718c>] cfg80211_get_drvinfo+0x21/0x115 [cfg80211] *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: iwl3945 iwl_legacy mwifiex_sdio mac80211 11 sdhci_pci sdhci pl2303 'ethtool' on the mwifiex device returned this OOPS as wiphy_dev() returned NULL. Adding missing set_wiphy_dev() call to fix the problem. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-10mwifiex: get rid of global adapter pointerAmitkumar Karwar
1) Avoid global adapter pointer usage a) in sdio.c by moving some code from mwifiex_cleanup_module() to mwifiex_sdio_remove(). b) in main.c by passing an extra parameter to few functions. 2) Add new variable "user_rmmod" to identify if mwifiex_sdio_remove() callback function is called in card removal or rmmod context. These code changes are adapted from Libertas driver. 3) Remove unnecessary NULL pointer check for "func" pointer in mwifiex_sdio_remove(). Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07mwifiex: disable transmission buffer aggregation for AMSDU packetsYogesh Ashok Powar
Padding per MSDU will affect the length of next packet and hence the exact length of next packet is uncertain here. Also, aggregation of transmission buffer, while downloading the data to the card, wont gain much on the AMSDU packets as the AMSDU packets utilizes the transmission buffer space to the maximum (adapter->tx_buf_size). Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07mwifiex: adding check for enough space before paddingYogesh Ashok Powar
All MSDUs, except the last one in an AMSDU, should end up at 4 bytes boundary. There is need to check if enough skb_tailroom space exists before padding the skb. Also re-arranging code for better readablity. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07mwifiex: Remove redundant skb_queue_empty checksYogesh Ashok Powar
The check of skb list empty before calling skb_peek and skb_dequeue is redundant. These functions returns NULL if the list is empty. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07mwifiex: remove list traversal in mwifiex_num_pkts_in_txqYogesh Ashok Powar
Instead of counting the number of packets in txq for particular RA list before AMSDU creation, maintain a counter which will keep track of the same. This will reduce some MIPS while generating AMSDU traffic as we only have to check the counter instead of traversing through skb list. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01mwifiex: remove support for old chipsets W0/W1Amitkumar Karwar
For SD8787 A0/A1 chipsets we use the default firmware image file 'mrvl/sd8787_uapsta.bin'. So the chip rev id variable is removed. The global variable fw_name is moved to adapter structure so that we can support a different interface, such as PCIe, in future. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-14 09:40:33 +0000