summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mwifiex
AgeCommit message (Collapse)Author
2012-10-24mwifiex: clean up scan state on errorBing Zhao
De-reference and deallocate scan state on failure. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Tested-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Ryan Cairns <rtc@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24mwifiex: return -EBUSY if specific scan request cannot be honoredBing Zhao
Previous patch "mwifiex: return -EBUSY if scan request cannot.." corrected regular scan request only. There is another case for specific scan that needs the same handling. Also, removed !req_ssid check as it has already been validated by caller. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Ryan Cairns <rtc@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08mwifiex: update cfg80211 with correct reason code when connection is lostAmitkumar Karwar
Driver gets LINK_LOST, DEAUTHENTICATED and DISASSOCIATED events from firmware when connection is lost in different scenarios. Currently we are using common code WLAN_REASON_DEAUTH_LEAVING for these cases. This patch adds support to parse an actual reason code from firmware event body and send it to cfg80211. WLAN_REASON_DEAUTH_LEAVING code is used if deauth is initiated by our device. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08mwifiex: update cfg80211 with correct reason code when association failsAmitkumar Karwar
This patch adds support to send correct reason code got from firmware when association attempt fails. Also, the error message displayed for association failure due to network incompatibility is modified. Current message "cannot find ssid.." misleads user. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08mwifiex: reset scan_processing flag in failure casesAmitkumar Karwar
scan_processing flag should be reset when scan request is failed due to some reasons Ex. memory allocation failure etc. Otherwise further scan requests will be blocked. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08mwifiex: return -EBUSY if scan request cannot be honoredBing Zhao
There are cases we cannot scan when request is received. For example, during WPA group key negociation the scan request will be blocked. We should return an error code to cfg80211 because cfg80211_scan_done will never be called. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: convert to use le16_add_cpu()Wei Yongjun
Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: enhance RX reordering to avoid packet drop during host sleepAvinash Patil
Once hostsleep is activated, this patch takes care of not dropping packets in RX reorder table. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add inactivity deauth support for apKevin Gan
The firmware has support for this feature, so we offload it to firmware. In start_ap, driver passes the inactivity timeout value to firmware via TLVs and firmware will report STA_DEAUTH event to driver when inactivity timer is fired. Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: set txpd when send a mgmt frame for AP and GO modeStone Piao
Set packet type and packet offset in txpd when send a mgmt frame in AP and GO mode. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: parse P2P IEs from beacon_dataStone Piao
Parse P2P IEs and set them to FW with related masks. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add support for P2P GO in interface type changeStone Piao
When cfg80211 calls to change interface type for P2P GO, send P2P mode config commands to firmware and set bss role and bss mode accordingly. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add support for P2P client in interface type changeStone Piao
When cfg80211 calls to change interface type for P2P client, send P2P mode config commands to firmware. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add P2P interfaceStone Piao
Due to firmware design, driver needs to add a default P2P interface to implement find phase and action frame handshake. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: send firmware initialization commands synchronouslyStone Piao
The driver will send some commands to firmware during the initialization. Currently these commands are sent asynchronously, which means that we firstly insert all of them to a pre-allocated command queue, and then start to process them one by one. The command queue will soon be exhausted if we keep adding new initialization commands. This issue can be resolved by sending initialization commands synchronously because each command is consumed and the buffer is recycled before queuing next command. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: append each IE into a seperate IE bufferStone Piao
When scan is triggered from cfg80211, the request contains some IEs and we should parse all the IEs and append each IE into a seperate IE buffer. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: process remain on channel expired eventStone Piao
Process remain on channel expired event, and notify cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement remain_on_channel and cancel_remain_on_channelStone Piao
Add a new command to implement remain_on_channel and cancel_remain_on_channel. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: report received management frames to cfg80211Stone Piao
Process the management frames received from firmware and report them to cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement cfg80211 mgmt_frame_register handlerStone Piao
Add a new command to implement mgmt_frame_register. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: advertise mgmt_stype to cfg80211Stone Piao
Advertise supported management frame types to cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement cfg80211 mgmt_tx handlerStone Piao
Implement mgmt_tx in cfg80211 ops through data path. Advertise probe resp offload and skip to send probe resp in AP or GO mode. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: fix coding style issueStone Piao
Remove unnecessary blank lines and extra tab. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-25mwifiex: potential corruption in mwifiex_update_uap_custom_ie()Dan Carpenter
ap_custom_ie is a struct mwifiex_ie_list which is quite different and also larger than struct mwifiex_ie. It's a difference between 4196 bytes and 262. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Stone Piao <piaoyun@marvell.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-25Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-09-24mwifiex: block scan request during heavy Tx trafficAmitkumar Karwar
Currently scan operation is delayed/aborted based on Tx traffic consistency. This decision is taken after receiving scan response of first scan command from FW. But when heavy traffic is running, we can not even afford to send first scan command and go off channel for 30msec. We will block scan request in this case. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24mwifiex: disconnect the device before entering suspend stateAmitkumar Karwar
By default, device is disconnected before entering suspend state. User can keep the connection alive by using module parameter "disconect_on_suspend=0". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24mwifiex: fix issue in resumed scan operationAmitkumar Karwar
When delayed scan operation is resumed, we just add next scan command in queue but don't wakeup main thread to process the command. Hence the command is downloaded to firmware only after waking up the main thread by any other means. This bug which was introduced after "mwifiex: improve scan delay logic.." patch is fixed here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-19cfg80211: constify name parameter to add_virtual_intfJohannes Berg
The name can't be modified by the driver, make it const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-11mwifiex: separate TxPD processing routine for APAvinash Patil
This patch adds separate tx packet descriptor routine for AP interface. This function fills bss_type, bss_num, wmm packet delay information etc for TxPD going on AP interface. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: disable WOW by defaultBing Zhao
Some platforms do not support WOW. Let's change the default wakeup criteria to 0. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: support custom world regulatory domainAmitkumar Karwar
country 00 (world regulatory domain) doesn't define channels 52 - 64 and 100 - 140. Add these channels to our custom world regulatory domain. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: do not hint regulatory domain with f/w country codeBing Zhao
We will use world regulatory domain (country 00) as default when driver is loaded. Later after a successful association cfg80211 will change the regulatory domain to a specific country if the AP has advertised country IE. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: use country ie of requested AP while associatingAmitkumar Karwar
AP's country ie is parsed and 11d information is updated in firmware while associating. Previous mwifiex_send_domain_info_cmd_fw() call in association path is not necessary now. Hence it is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: update adapter->bss_prio_tbl[j].bss_prio_cur correctlyAmitkumar Karwar
"adapter->bss_prio_tbl[j].bss_prio_head" points to linked list of interfaces with priority 'j'. "bss_prio_tbl[j].bss_prio_cur" is supposed to point to next interface every time the routine for dequeuing the packet is called. This ensures that each interface gets fair chance. Currently we have AP and station interfaces with priority '0'. Therefore "adapter->bss_prio_tbl[0].bss_prio_cur" should alternately point to AP and station nodes. Since "bss_prio_cur" is not correctly updated, for each packet picked for AP, two packets are picked for station interface. This patch fixes the problem by correctly updating "bss_prio_cur". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: have same priority for AP and station trafficAmitkumar Karwar
Currently AP interface has higher priority over station. Hence separate entries are created in "adapter->bss_prio_tbl" for these interfaces and station packet is dequeued only if there is not packet in queue for AP. It is observed that ping for station interface doesn't work if heavy traffic is running on AP. The problem is fixed by having same priority for both the interfaces. This patch also removes an extra initialisation for "priv->bss_priority". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: remove AMSDU_AGGR_CTRL command response handlerAmitkumar Karwar
HostCmd_CMD_AMSDU_AGGR_CTRL is never called with GET action. So the code in mwifiex_ret_amsdu_aggr_ctrl() becomes redundant. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: remove 11N_CFG command response handlerAmitkumar Karwar
HostCmd_CMD_11N_CFG is never called with GET action. So the code in mwifiex_ret_11n_cfg() becomes redundant. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: remove get operation code for SUBSCRIBE EVENT commandAmitkumar Karwar
We don't send this command with GET action. Redundant code in mwifiex_ret_subsc_evt() is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-09-07mwifiex: store mwifiex_ds_misc_subsc_evt in mwifiex_privateJeff Disher
Since mwifiex_ds_misc_subsc_evt is used in an asynchronous case, store the structure in the long-lived mwifiex_private instead of on the calling stack. This fixes a problem where the response of the asynchronous operation would corrupt a stack frame potentially in use by a different thread. Signed-off-by: Jeff Disher <disher@chromium.org> Reviewed-by: Sam Leffler <sleffler@chromium.org> Tested-by: Jeff Disher <disher@chromium.org> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: make use of is_zero_ether_addr()Bing Zhao
Use is_zero_ether_addr() instead of directly using memcmp() to determine if the ethernet address is all zeros. Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: parse rate info for APAvinash Patil
This patch adds support for parsing rates from cfg80211_ap_settings of start_ap handler. This in turn adds support for 11a and 11b phy configurations. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: don't disable wait_q_enabled flagAmitkumar Karwar
We should not disable "cmd_node->wait_q_enabled" flag here before calling mwifiex_insert_cmd_to_free_q() because we want to wake up the thread waiting for command completion inside this function. The wait_q_enabled flag will be disabled internally upon command completion. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: release semaphore acquired for internal scan operationAmitkumar Karwar
If "iw connect" command is fired for station interface, when heavy traffic is running on AP interface, internal scan operation performed before actual association is aborted. In this case we missed to release semaphore. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: use is_zero_ether_addr() instead of memcmp()Wei Yongjun
Using is_zero_ether_addr() instead of directly use memcmp() to determine if the ethernet address is all zeros. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: use is_broadcast_ether_addr() instead of memcmp()Wei Yongjun
Using is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is broadcast address. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-05mwifiex: fix skb length issue when send a command to firmwareStone Piao
When we send a command to firmware, we assumed that cmd_size will be always less than or equal to the structure size of host_cmd_ds_command. However, this is no longer true after we added AP support. There are some AP commands that Custom IE TLVs are included in command buffer, hence the cmd_size gets enlarged by the TLV data. We need to increase the skb length for the extra data. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: use GFP_ATOMIC under spin lockDan Carpenter
We're holding the sta_list_spinlock here so we can't sleep. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: notify cfg80211 about MIC failuresAmitkumar Karwar
Call cfg80211_michael_mic_failure() handler when there is a MIC error event from firmware. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-11 13:38:16 +0000