summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mwifiex
AgeCommit message (Collapse)Author
2012-06-20mwifiex: set HT capability based on cfg80211_ap_settingsAvinash Patil
Parse HT IE from cfg80211 and set HT capabilities accordingly to FW. If HT IE is missing, 11n would be disabled in FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20mwifiex: set channel via start_ap handler for AP interfaceAvinash Patil
This patch adds functionality to set channel info received from cfg80211_ap_settings in start_ap handler. Since set_channel cfg80211 handler has been removed and we need not explicitely call mwifiex_uap_set_channel(); hence this function definition is also removed. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/main.c net/bluetooth/hci_event.c
2012-06-12mwifiex: fix incorrect privacy setting in beacon and probe responseAvinash Patil
Test procedure: 1. Start AP with security setting (e.g. WPA2) 2. Stop AP 3. Start AP with open security Here it's observed that privacy is enabled in beacons and probe responses. This patch fixes it by checking the privacy parameter from cfg80211_ap_settings. If privacy is not set in cfg80211_ap_settings, set open authentication and no encryption in FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-11mwifiex: scan less channels per scan command to improve Tx trafficAmitkumar Karwar
Currently 4 channels are scanned per scan command. if scan request is issued by user during Tx traffic, radio will be out of channel for "4 * per_chan_scan_time" for each scan command and will not be able to receive Rx packets. This adds delay in data traffic. We can minimize it by reducing number of channels scanned per scan command in this scenario. We can not always scan 1 channel per scan command due to limitation of number of command buffers. So we add code to decide number of channels scanned per scan command in associated state. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-11mwifiex: fix simultaneous scan and Tx traffic problemAmitkumar Karwar
If scan operation is started when Tx traffic is already running, driver locks Tx queue until it gets completed. With this logic there is a delay for Tx packets. This patch implements new approach to give Tx path higher priority in this case. Driver internally sends multiple synchronous scan commands to firmware when scan is requested by user. Now we will make sure that Tx queue is empty everytime before sending next scan command. If Tx queue isn't empty scan command will be postponsed by 20msec. This rule will be followed until Tx queue becomes empty or timeout of 1 second happens. In case of timeout scan operation will be aborted. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-11mwifiex: shorten per channel scan timeBing Zhao
Currently the scan time per channel for active scanning is set to 200ms. It takes quite a while to finsh scanning on all channels, especially with a dual band configuration. Change the per channel scan time settings to the following values: passive scan: 110ms active scan: 30ms specific scan: 30ms Above settings have been tested on x86 and arm platforms. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mwifiex: support NL80211_HIDDEN_SSID_ZERO_LEN for uAPAvinash Patil
mwifiex uAP supports NL80211_HIDDEN_SSID_ZERO_LEN type of hidden SSID only. NL80211_HIDDEN_SSID_ZERO_CONTENTS is not supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mwifiex: invalidate bss config before setting channel for uAPAvinash Patil
Mark bss_config parameters as invalid before setting AP channel. This prevents from setting invalid parameters while setting AP channel to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04mwifiex: support NL80211_HIDDEN_SSID_ZERO_LEN for uAPAvinash Patil
mwifiex uAP supports NL80211_HIDDEN_SSID_ZERO_LEN type of hidden SSID only. NL80211_HIDDEN_SSID_ZERO_CONTENTS is not supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04mwifiex: invalidate bss config before setting channel for uAPAvinash Patil
Mark bss_config parameters as invalid before setting AP channel. This prevents from setting invalid parameters while setting AP channel to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: remove set_channel cfg80211 hookJohannes Berg
Since mwifiex only supports managed and IBSS modes, it doesn't need a set_channel call. The callback might be called, but it won't matter as nothing can use the channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: delete IEs when stop_apAvinash Patil
Delete custom IEs set by start_ap cfg80211 handler when stop_ap handler is called for AP interface. IE index required for deletion is stored in mwifiex_private structure. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: retrieve IEs from cfg80211_beacon_data and send to firmwareAvinash Patil
This patch adds logic for setting tail beacon IE, probe response IE and assoc response IE from cfg80211_ap_settings parameter of start_ap handler into FW. RSN IE is also retrieved from tail IE buffer and sent to firmware. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add custom IE frameworkAvinash Patil
1. support for setting custom IE from application hostapd etc. Custom IE addition using auto-indexing and Custom IE deletion using static indices (which are allocated during IE addition and stored in driver) are supported. 2. Separate file for handling IE related execution. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: rearrange AP sys configure codeAvinash Patil
This patch takes into account AP config_type (bss config/custom ie config) while preparing AP sys_configure command buffer. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add WPA2 support for APAvinash Patil
1. Support for parsing security related parameters from cfg80211_ap_settings in start_ap cfg80211 handler 2. Conversion of these security information into FW understandle TLVs and setting into FW thru sys_config command 3. key management is done on host. This ensures that FW forwards EAPOL key packets to host instead of processing on its own. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add AP event handling frameworkAvinash Patil
Added logic to handle AP event that are generated by the firmware. As MLME/SME is implemented in the firmware, events such as station association and deauthentication, must be sent to userspace (hostapd) for creating and deleting station database. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add cfg80211 start_ap and stop_ap handlersAvinash Patil
1. add start AP and stop AP handlers 2. support for parsing ssid, beacon period, DTIM period from beacon_parameters structure and setting it to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: common set_wiphy_params cfg80211 handler for AP and STA interfaceAvinash Patil
Add support for setting fragmentation threshold, RTS threshold and retry limit. Since wiphy parameters are properties of physical device, appropriate function to set phy parameters is invoked depending upon bss_type(STA or AP) for each virtual interface. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: handle interface type changes correctlyAvinash Patil
mlan0: managed or ibss The iftype can be changed from STATION to ADHOC, and vice versa. uap0: AP only The iftype cannot be changed. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: stop BSS in deauthentication handlingAvinash Patil
While in AP mode, we should stop BSS in deauthentication handler. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add AP command sys_config and set channelAvinash Patil
1. support for AP sys_config command and added parsing of channel information. 2. support for setting AP channel from cfg80211 set_channel handler Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add bss start and bss stop commands for APAvinash Patil
1. separate file for preparing uAP command buffer 2. definition of bss_start and bss_stop commands being sent to firmware Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: append peer mac address TLV in key material command to firmwareAvinash Patil
Modify key related cfg80211 handlers to copy peer mac address for pairwise keys. If peer mac address is not present or group keys, it will be sent as broadcast mac address. This would be required since hostapd downloads per peer PTK. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: save adapter pointer in wiphy_privAvinash Patil
Since wiphy structure is per adapter we would save adapter, instead of mwifiex private pointer, in wiphy_priv. Also move country_info from mwifiex_private to mwifiex_adapter as making it part of mwifiex_adapter looks logical. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: multi-interface support for mwifiexAvinash Patil
mwifiex supports STA and AP interfaces which use same phy. Indicate this to cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: support for creation of AP interfaceAvinash Patil
1. wiphy structure is per device; hence moved it to mwifiex_adapter mwifiex_register_cfg80211 takes mwifiex_adapter as parameter. This function only registers wiphy with cfg80211. 2. Creation of interfaces is moved to cfg80211 add_virtual_interface handler. 3. Create 2 interfaces by default: station and AP Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: handle station specific commands on STA interface onlyAvinash Patil
Commands like IBSS coalescing status, power save, 11D should be handled only when bss_type is STA. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: allocate space for one more mwifiex_private structureAvinash Patil
Reserve space for one more priv structure. This will be used by AP interface. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15mwifiex: fix coding style issue in mwifiex_deauthenticateBing Zhao
Documentation/CodingStyle says "Do not unnecessarily use braces where a single statement will do." Use "switch/case", instead of "if/else_if/else", so that more cases can be added later. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mwifiex: fix static checker warningsAmitkumar Karwar
"oui_type" in structure "ieee_types_vendor_header" is not used separately, so include it in "oui" array. Now complete oui will be compared fixing following warnings. drivers/net/wireless/mwifiex/sta_ioctl.c:1410 mwifiex_set_gen_ie_helper() error: memcmp() 'pvendor_ie->oui' too small (3 vs 4) drivers/net/wireless/mwifiex/sta_ioctl.c:1435 mwifiex_set_gen_ie_helper() error: memcmp() 'pvendor_ie->oui' too small (3 vs 4) drivers/net/wireless/mwifiex/scan.c:1177 mwifiex_update_bss_desc_with_ie() error: memcmp() 'vendor_ie->vend_hdr.oui' too small (3 vs 4) drivers/net/wireless/mwifiex/scan.c:1185 mwifiex_update_bss_desc_with_ie() error: memcmp() 'vendor_ie->vend_hdr.oui' too small (3 vs 4) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mwifiex: add support for SD8786 sdioWarheadsSE
modified: drivers/net/wireless/mwifiex/Kconfig - notate additional chipset modified: drivers/net/wireless/mwifiex/sdio.c - add definition of id (0x9116) - add to switch for firmware load - add MODULE_FIRMWARE modified: drivers/net/wireless/mwifiex/sdio.h - add definition of default firmware name Signed-off-by: Jason Plum <max@warheads.net> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-26Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c
2012-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Fix merge between commit 3adadc08cc1e ("net ax25: Reorder ax25_exit to remove races") and commit 0ca7a4c87d27 ("net ax25: Simplify and cleanup the ax25 sysctl handling") The former moved around the sysctl register/unregister calls, the later simply removed them. With help from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23mwifiex: add support for Marvell USB8797 chipsetAmitkumar Karwar
This patch supports Avastar 88W8797 chipset with USB interface. The corresponding firmware image file is located at: "mrvl/usb8797_uapsta.bin" Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17mwifiex: corrections in timestamp related codeAmitkumar Karwar
We get two timing related fields for each bss from firmware in scan results. 1) timestamp - Actual timestamp information in probe response/beacon 2) network_tsf - firmware's TSF value at the time the beacon or probe response was received. Both are needed while associating by firmware. The patch takes care of following things. 1) We should pass "timestamp" to cfg80211_inform_bss(), but currently "network_tsf" is being provided. This error is corrected here. 2) Rename "network_tsf" to "fw_tsf" 3) Make use of u64 variable instead of an array of u8/u32 to save parsed "timestamp" information. 4) Use timestamp provided to stack in scan results using cfg80211_inform_bss() while associating. (bss->tsf) 5) Allocate space to save fw_tsf in "priv" of cfg80211_bss and retrieve it while associating. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17mwifiex: code cleanup in BSS handlingAmitkumar Karwar
Rearrange some code to save extra parameters to the functions. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13mwifiex: update pcie8766 scratch register addressesBing Zhao
The scratch register addresses have been changed for newer chips. Since the old chip was never shipped and it will not be supported any more, just update register addresses to support the new chips. Cc: <stable@vger.kernel.org> # 3.2.y, 3.3.y Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: use asynchronous firmware loadingAmitkumar Karwar
Make use of request_firmware_nowait instead of request_firmware to load FW asynchronously. This fixes timeouts introduced with recent udev changes. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: add support for WPS2.0Avinash Patil
This patches enables setting association request and probe request IE for station interface. WPS exchange between WPS2.0 AP and mwifiex STA Enrollee/External Registrar completes successfully. Tested with wpa_supplicant 1.0 and 2.0 devel. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: display correct country information in debugfs "info"Amitkumar Karwar
Use "priv->country_code" string to display country information in debugfs command "info" instead of "adapter->region_code". "adapter->region_code" contains default region code got from FW while initialization, whereas "priv->country_code" is updated in reg_notifier handler whenever there is a change in regulatory domain. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: set default regulatory domainAmitkumar Karwar
Driver gets region code from FW during initialisation. This patch makes use of it for settting default regulatory domain using regulatory_hint() API. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: fix typo in RSSI_HIGH event handlingBing Zhao
This is a copy-n-paste error introduced in recent patch "mwifiex: add set_cqm_rssi_config handler support". Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12wireless, mwifiex: drop redundant NULL test before call to release_firmware()Jesper Juhl
Since release_firmware() does its own test for NULL it is redundant to do so before calling it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-04-11wireless: Remove unnecessary ; from while (0) macrosJoe Perches
Semicolons are not necessary after macros that end in while (0). Remove them. Simplify the macros with tests of do { if (foo>size) memset1; else memset2;} while (0); to a single line memset(,,min_t(size_t, foo, size)) Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mwifiex: don't use IEEE80211_MAX_QUEUESJohannes Berg
IEEE80211_MAX_QUEUES is an internal mac80211 value, it is not guaranteed to be always 4. The firmware API in mwifiex almost certainly doesn't care about mac80211 changing though, so mwifiex shouldn't use this value. Maybe it should use IEEE80211_NUM_ACS instead and that is what I'm doing here as at least that value will probably never change, but maybe it should have its own define instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09mwifiex: add set_cqm_rssi_config handler supportAmitkumar Karwar
In this handler LOW_RSSI and HIGH_RSSI events are subscribed to FW using provided threshold value so that FW will monitor connection quality and trigger any of these events. Driver will notify cfg80211 about connection quality based on inputs from FW and provided hysteresis. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09mwifiex: support STATION_INFO_SIGNAL_AVGAmitkumar Karwar
This patch adds the support for updating average signal information in dump_station(). Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-11 02:05:58 +0000