summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ti
AgeCommit message (Collapse)Author
2014-07-15wlcore/wl18xx/wl12xx: convert bitmaps to unsigned longsEliad Peller
The *_bit operations expect unsigned longs. Instead of casting the pointers, simply define various bitmaps as unsigned long (instead of u32). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wl18xx: make sure fw_status->priv exists before derefEliad Peller
In some corner cases with specific timings, we might try dequeueing tx before we got information about the link status (e.g. due to recovery during tx). Instead of NULL dereference, assume all the links in this case have low priorities. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wl18xx: change the number of WLAN addrs per chipArik Nemtsov
Each 18xx chip contains only 2 real MAC addresses usable for WLAN, forcing us to use the LAA bit approach to obtain a third MAC address. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: don't switch channels on disconnected STA vifsArik Nemtsov
Sending the FW a channel switch command on a disconnected vif may result in a beacon loss event. Avoid this corner case. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: register vendor commandsEliad Peller
All the smart config code is in place now, so register the relevant vendor commands. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: increase max roc duration to 30 secondsEliad Peller
we don't have any actual limitation in the driver, so increase it arbitrarily to 30 seconds. The long ROC is needed for the smart config.flow. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore/wl18xx: handle smart config eventsEliad Peller
add defintions and handling for smart config events (SMART_CONFIG_SYNC_EVENT_ID and SMART_CONFIG_DECODE_EVENT_ID) parse the relevant info and send it to userspace as vendor event. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: handle smart config vendor commandsEliad Peller
userspace can ask to perform various smart config actions via custom vendor commands. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore/wl18xx: add smart config commandsEliad Peller
These commands configures the fw to set key, enter smart config mode, and exit it. Add relevant hw ops as well. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: add smart config definitionsEliad Peller
Add definitions for the smart config commands. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: use correct LAA bitEliad Peller
The LAA bit is second bit of the MSB, not of the third byte. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wl18xx: fix last tx rate calculationEliad Peller
The last tx rate calculation didn't take into account the different indices of 11a and 11g rates tables. Add the required alignment (count only from the first 11a rate in case of 11a) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: user smaller sqn padding for GEMEliad Peller
On recovery, we increase the current seq num by WL1271_TX_SQN_POST_RECOVERY_PADDING in order to compensate for packets we might have missed during recovery. It seems that some GEM APs have issues when the gap is too big, so use a smaller padding in this case. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore: save seq num only between recoveriesEliad Peller
We want seq num (freed_pkts) to be initialized on each new connection, but keep persistent between recoveries/suspends. Save the freed_pkts in the private block of the sta struct (we already do a similar thing for AP's stations). However, keep the old wlvif->total_freed_pkts in order to avoid too intrusive change. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mac80211: split sched scan IEsDavid Spinadel
Split sched scan IEs to band specific and not band specific blocks. Common IEs blocks may be sent to the FW once per command, instead of per band. This allows optimization of size of the command, which may be required by some drivers (eg. iwlmvm with newer firmware version). As this changes the mac80211 API, update all drivers to use the new version correctly, even if they don't (yet) make use of the split data. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: support more than one band in scan requestDavid Spinadel
Some drivers (such as iwlmvm) can handle multiple bands in a single HW scan request. Add a HW flag to indicate that the driver support this. To hold the required data, create a separate structure for HW scan request that holds cfg scan request and data about different parts of the scan IEs. As this changes the mac80211 API, update all drivers using it to use the correct new function type/argument. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...
2014-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville
2014-05-19cfg80211: constify wowlan/coalesce mask/pattern pointersJohannes Berg
This requires changing the nl80211 parsing code a bit to use intermediate pointers for the allocation, but clarifies the API towards the drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-16wlcore: Remove trailing semicolon from do {...} while (0) macroJoe Perches
These should not have trailing semicolons so remove them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-16drivers/net/wireless/ti/wl*/spi.c: Simplify CRC computationGeorge Spelvin
These devices require commands stored in buffers in an odd order, different from that in which the CRC is computed. Rather than make two copies of the commands in two different orders, form the commands in logical (CRC) order, append the CRC, then byte-swap in place to the desired order. The old code worked fine, I'm just scratching an "ugh, that's ugly" itch. Signed-off-by: George Spelvin <linux@horizon.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-16lib/crc7: Shift crc7() output left 1 bitGeorge Spelvin
This eliminates a 1-bit left shift in every single caller, and makes the inner loop of the CRC computation more efficient. Renamed crc7 to crc7_be (big-endian) since the interface changed. Also purged #include <linux/crc7.h> from files that don't use it at all. Signed-off-by: George Spelvin <linux@horizon.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13wl1251: only call ieee80211_beacon_loss in managed modeGrazvydas Ignotas
ieee80211_beacon_loss() is only to be called in managed mode, but the firmware may send the sync timeout event at any time, so do a check before calling. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13wl1251: fix mixed up args for joinGrazvydas Ignotas
The join arguments are mixed up, passing beacon_interval instead of channel and channel instead of beacon_interval. Fix them. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13wl1251: fix null data for IBSSGrazvydas Ignotas
Fix the WARN below by not calling ieee80211_nullfunc_get() in IBSS mode, but setting up empty template the same way wl12xx driver does. WARNING: CPU: 0 PID: 914 at net/mac80211/tx.c:2750 ieee80211_nullfunc_get+0xc0/0xd0 [mac80211]() Modules linked in: wl1251_sdio wl1251 mac80211 cfg80211 ... [<c00439c0>] (warn_slowpath_null) [<bf0bdfdc>] (ieee80211_nullfunc_get [mac80211]) [<bf134774>] (wl1251_op_bss_info_changed [wl1251]) [<bf099e14>] (ieee80211_bss_info_change_notify [mac80211]) ... Also perform join command regardless of bss_type as that seems to be required for proper operation. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13Revert "wl1251: enforce changed hw encryption support on monitor state change"Grazvydas Ignotas
This reverts commit b90a1165a72fabdc260abaa9eeadcbfd29e267eb. That commit (or rather, hack) triggers a scary WARN in IBSS (ad-hoc) mode. Steps to reproduce: ifconfig wlan0 down iwconfig wlan0 mode ad-hoc ifconfig wlan0 up ------------[ cut here ]------------ WARNING: CPU: 0 PID: 905 at kernel/workqueue.c:1400 __queue_work+0x21c/0x2f4() Modules linked in: wl1251_sdio wl1251 mac80211 cfg80211 CPU: 0 PID: 905 Comm: ifconfig Not tainted 3.15.0-rc2#233 [<c0015f38>] (unwind_backtrace) from [<c0012938>] [<c0012938>] (show_stack) from [<c05d4034>] [<c05d4034>] (dump_stack) from [<c0043984>] [<c0043984>] (warn_slowpath_common) from [<c00439c0>] [<c00439c0>] (warn_slowpath_null) from [<c005b6c8>] [<c005b6c8>] (__queue_work) from [<c005b820>] [<c005b820>] (queue_work_on) from [<bf134ac0>] [<bf134ac0>] (wl1251_op_config [wl1251]) [<bf099a70>] (ieee80211_hw_config [mac80211]) ... This happens because ieee80211_connection_loss() is not expected to be called in IBSS mode (mac80211 ends up queuing uninitialized work in that case). Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30wlcore: fix usage of platform_device_add_data()Christian Engelmayer
Coverity CID 986698 reports leakage of struct wlcore_platdev_data in the probe functions of both the SPI/SDIO interfaces. The structure passed to platform_device_add_data() is dynamically allocated and only freed in the error paths, however, platform_device_add_data() adds a copy of the platform specific data to the device. Move the temporary struct that is kmemdup'ed to the stack. This issue exists since afb43e6d (wlcore: remove if_ops from platform_data). Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/mac80211/chan.c
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-14wl18xx: align event mailbox with current fwEliad Peller
Some fields are missing from the event mailbox struct definitions, which cause issues when trying to handle some events. Add the missing fields in order to align the struct size (without adding actual support for the new fields). Reported-and-tested-by: Imre Kaloz <kaloz@openwrt.org> Cc: stable@vger.kernel.org # 3.14+ Fixes: 028e724 ("wl18xx: move to new firmware (wl18xx-fw-3.bin)") Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14wlcore: ignore dummy packet events in PLT modeLuciano Coelho
Sometimes the firmware sends a dummy packet event while we are in PLT mode. This doesn't make sense, it's a firmware bug. Fix this by ignoring dummy packet events when we're PLT mode. Reported-by: Yegor Yefremov <yegorslists@googlemail.com> Reported-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09mac80211: add vif to flush callEmmanuel Grumbach
This will allow the low level driver to make decision based on the vif such as queues etc... Since the vif might be NULL, we can't add it to the tracing functions. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [fix staging rtl8821ae driver] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-04Drivers:net:wireless:ti:wl1251: Fixed Sparse invalid assignment warningSurendra Patil
Sparse warns about invalid assignment in drivers/net/wireless/ti/wl1251/cmd.c:451:42: warning: invalid assignment: |= drivers/net/wireless/ti/wl1251/cmd.c:451:42: left side has type restricted __le16 drivers/net/wireless/ti/wl1251/cmd.c:451:42: right side has type int Hence type converted right side to __le16. Signed-off-by: Surendra Patil <surendra.tux@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-03wl1251: use skb_trim to make skb shorterIvaylo Dimitrov
the current code is directly setting skb->len, which is not correct and brings problems with HAVE_EFFICIENT_UNALIGNED_ACCESS enabled in config Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-03net: Replace min macro with min_tSilvan Jegen
Instead of an explicit cast, use the min_t macro. Signed-off-by: Silvan Jegen <s.jegen@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wl1251: spi: add device tree supportSebastian Reichel
Add device tree support for the spi variant of wl1251. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wl1251: spi: add vio regulator supportSebastian Reichel
This patch adds support for requesting the regulator powering the vio pin. Signed-off-by: Sebastian Reichel <sre@debian.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wl1251: move power GPIO handling into the driverSebastian Reichel
Move the power GPIO handling from the board code into the driver. This is a dependency for device tree support. Signed-off-by: Sebastian Reichel <sre@debian.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wl1251: split wl251 platform data to a separate structureLuciano Coelho
Move the wl1251 part of the wl12xx platform data structure into a new structure specifically for wl1251. Change the platform data built-in block and board files accordingly. Signed-off-by: Luciano Coelho <coelho@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Sebastian Reichel <sre@debian.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-20mac80211: allow driver to return error from sched_scan_stopJohannes Berg
In order to solve races with sched_scan_stop, it is necessary for the driver to be able to return an error to propagate that to cfg80211 so it doesn't send an event. Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-13wlcore: add support for STA CSA with chan contextsArik Nemtsov
TI wl12xx/wl18xx cards support channel switch via a driver specific switch_channel op while operating with channel contexts. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: enable beacon filtering only after receiving a beaconEliad Peller
Enabling beacon filtering before receving a beacon might result in not having a beacon at all for the current connected AP, which prevents the station from entering power-save. Replace the current approach (of starting beacon filtering on init) and configure beacon filering only after bss_conf->dtimper is set (which means mac80211 already parsed a beacon). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: increase timeout to 5000 msecsYaniv Machani
dfs configuration command might take longer than the current timeout. increase it to 5 seconds. Signed-off-by: Yaniv Machani <yanivma@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: decrease warning verbosity during recoveryArik Nemtsov
Silently ignore repetitive scheduling of recovery work and commands being passed to the bus when the HW is not available. This can happen many times during recovery and slow it down. It also spams the kernel logs. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: consider multiple APs when checking active_link_countEliad Peller
Each AP has its own global and broadcast links, so when checking for active sta count (according to the active_link_count) we must take them all into account. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: don't handle unsetting of default wep keyEliad Peller
mac80211 unsets the default wep key on disassoc. The fw doesn't support this notification, so simply ignore it. The actual flow actually triggers fw recovery in some cases, as mac80211 unsets the default key only after disassoc, when wlvif->sta.hlid, resulting in invalid hlid being passed to the fw. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: wl18xx: allow CCK rates for AP modeArik Nemtsov
12xx chips allow only OFDM rates in AP mode for BT-Coex purposes. This is no longer required in 18xx chips, starting with FW 8.6.0.0.8. Update the min allowed FW version in 18xx to support this functionality. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: don't stop sched_scan on interface removalBarak Bercovitz
Stopping sched scan on interface removal (during recovery) is no longer needed, as sched scanning is automatically restarted by mac80211. Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: send EAPOL frames with voice priorityIgal Chernobelsky
Send EAPOL frames with voice priority by setting (the new) TX_HW_ATTR_EAPOL_FRAME bit in tx attribute. Sending EAPOL with voice priority fixes re-key timeout issues during heavy traffic. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-20 19:34:51 +0000