summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/wl12xx
AgeCommit message (Collapse)Author
2009-11-28wl1271: Remove REF_CLK hackLuciano Coelho
This hack was totally wrong and was "needed" because of a problem in the way we were sending the GENERAL_PARMS command to the firmware. Now that that problem has been fixed, this hack can be removed. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: remove workaround to ignore -EIO from radio and general paramsLuciano Coelho
We were ignoring the -EIO return value from wl1271_cmd_radio_params() and wl1271_cmd_general_params(), because they were always returning an error and we didn't know why. Now this has been fixed, so the workaround can be removed. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: fix radio and general parameters commandsLuciano Coelho
We were missing the command header in the radio and general parameters commands. This was causing them to fail, resulting in problems in the power levels and other PLT-related commands. Also reorganized the command functions, moving from wl1271_init.c to wl1271_cmd.c where it fits better. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: set radio and general params also for PLTLuciano Coelho
We need to set the radio and general parameters when starting PLT mode. This patch adds calls to TEST_CMD_INI_RADIO_PARAMS and TEST_CMD_INIT_GENERAL_PARAMS when initializing PLT mode. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: fix the inetdev notifier callback return valuesLuciano Coelho
The wl1271_dev_notify() was returning 0 or -ENODEV, when it should return NOTIFY_* instead. Now we use NOTIFY_DONE when we didn't handle the event or NOTIFY_OK when we have handled it. For inetdev notifications, it doesn't matter whether we use NOTIFY_DONE or NOTIFY_OK, because it ignores the return value of the call to blocking_notifier_call_chain(). But the notify.h header says that NOTIFY_DONE is "Don't care" and NOTIFY_OK is "Suits me", so that seems to be the right way to do it. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: Set PSM support flags in driver configurationJuuso Oikarinen
Set the PSM support flag in the device configuration for the mac80211 stack. This will enable usage of powersave. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: Prevent PSM-entry retry loop if PSM cancelledJuuso Oikarinen
Prevent endless PSM-entry retry loops, if PSM has already been cancelled while PSM entry was attempted. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: Decrease BET consecutive terminated beacons value to 10Juuso Oikarinen
Decrease the consecutive terminated beacons value for BET from 100 to 10. According to the vendor, 10 will give a more reliable connection and more reliable detection of connection problems. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: add NVS in EEPROM supportDavid-John Willis
wl1251 supports also that NVS is stored in a separate EEPROM, add support for that. kvalo: use platform data instead Kconfig and use kernel style Signed-off-by: David-John Willis <John.Willis@Distant-earth.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: remove depcreated qual usageKalle Valo
Fixes warnings: drivers/net/wireless/wl12xx/wl1251_rx.c: In function 'wl1251_rx_status': drivers/net/wireless/wl12xx/wl1251_rx.c:75: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:77: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:77: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:77: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:78: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:78: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:78: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Send null data packet with "TODS" bit setVidhya Govindan
According to IEEE80211 standard all the data packets have to be sent with TODS bit set. This patch fixes the null data packet format which was sent without TODS bit set. This should fix many problems associated with power save. Janne Ylalehto also found this fix in the same time as mine, for a different bug he was working on. Signed-off-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Fix regression in IRQ loop handlingJuuso Oikarinen
In some cases, the IRQ loop handler could acknowledge an interrupt to the chipset, but not service it. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Filter out unwanted eventsJanne Ylalehto
Filter out unwanted events to reduce wakeups. Signed-off-by: Janne Ylalehto <janne.ylalehto@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Add IRQ looping supportJanne Ylalehto
Add support for IRQ looping. Helps in the case that we have e.g. multiple packets coming from the network when we wake up from the ELP. Signed-off-by: Janne Ylalehto <janne.ylalehto@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Increase the beacon loss timeout value and handle regain eventVidhya Govindan
This patch increases the number of beacons to be missed before generating SYNC TIMEOUT event. It increases the beacon timeout period to 500 microseconds, which gives enough time for the firmware to receive probe response or beacon. Also handled the regain event from firmware once it receives a probe response or beacon. Signed-off-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Set the correct dtim period to the firmwareVidhya Govindan
This patch sets the dtim period obtained from the mac80211 to firmware. Signed-off-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Add acx command to set tbtt and dtim periodVidhya Govindan
The dtim period obtained from the mac80211 is not set to the firmware. This patch implements the acx command to set correct tbtt and dtim value to the firmware. Signed-off-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: mask aid bits 14 and 15 in ps-poll templateKalle Valo
In ps-poll template aid bits 14 and 15 were not masked as required by the standard. Mask them so that aid is sent in correct format. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: allocate space for firmware with vmalloc()Kalle Valo
Earlier firmware was stored to a memory area allocated with kmalloc() but finding a a contiguous area of memory long enough for the firmware is very difficult in certain cases. better to allocate the memory for firmware with vmalloc() instead and use a small buffer for DMA transfers. Thanks to Eero Tamminen for the idea. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Implement delayed entry into ELP modeJuuso Oikarinen
Implement (slightly) delayed entry into ELP. This will cure several problems: - It works around a firmware race condition if ELP is entered too fast after commands (resulting in ELP timeout -traces) - It will reduce the number of sleep-wake cycles between already scheduled events such as interrupts and tx, hence improving performance (less delay in switching between RX and TX) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Configure beacon filtering on if PSM usedJuuso Oikarinen
Enable beacon filtering when PSM is enabled Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Enable beacon filtering with the stackJuuso Oikarinen
Enable beacon filtering with the mac80211 stack. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Add connection monitoring configurationJuuso Oikarinen
Add configuration for connection monitor (number of allowed beacons, and timeout after last received beacon.) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11wl12xx: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04wl1271: use __dev_alloc_skb() on RXLuis R. Rodriguez
RX is handled in a workqueue therefore allocating for GFP_ATOMIC is overkill and not required. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04wl1271: depend on INETJohn W. Linville
wl1271_main.c:(.text+0x271052): undefined reference to `unregister_inetaddr_notifier' wl1271_main.c:(.text+0x2714d7): undefined reference to `register_inetaddr_notifier' Driver is doing some filtering based on IP addresses... Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-02wl1271: Generalize command response readingJuuso Oikarinen
Responses to firmware commands are read in by the command transmission function, as part of command flow. Previously responses were read in multiple places. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-02wl1271: Correct endianness-handling of command statusJuuso Oikarinen
Correct the endianness-handling of the firmware command result status handling code. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-02wl1271: Add retry implementation for PSM entriesJuuso Oikarinen
PSM entries can fail (transmitting the corresponding null-func may not be heard by the AP.) Previously, this scenario was not detected, and out-of-sync between STA and AP could occur. Add retry implementation for the entries to recover from the situation. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-02wl1271: Check result code of commandsJuuso Oikarinen
Check the result code of all commands, and return an error code if the firmware reports an error in execution. Previously this error would go ignored in most cases. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-02wl1271: Increase TX power valueJuuso Oikarinen
Currently, to avoid distortions, the TX power level has been hardcoded to a low value. The value is slightly too low for good functionality, so we increase it from 7dB to 12dB. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-02wl1271: Remove excess null-data template settingsJuuso Oikarinen
The null-data template (nullfunc) is dependent on the BSSID of the current AP only, so it needs to be updated only when the BSSID changes. Removed excess setting of the template. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30wl1271: fix init loop timeoutLuciano Coelho
The check after the loop which checks whether the initialization timed-out was wrong. If the initialization would succeed exactly in the 20000th time (the value set for INIT_LOOP), the driver would bail out and claim that initialization failed. Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30wireless: remove WLAN_80211 and WLAN_PRE80211 from KconfigJohn W. Linville
With the WLAN_PRE80211 drivers moved to drivers/staging, this distinction becomes unnecessary. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30wl1251: enable power saveKalle Valo
wl1251 supports power save and it can be enabled now. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: use ieee80211_rx_ni()Luciano Coelho
Use the new ieee80211_rx_ni() function instead of ieee80211_rx(). Since we use a workqueue to handle the RX path, we need to call the new function, which disables bottom half handling. This patch fixes the NOHZ: local_softirq_pending messages. CC: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1251: re-disable PG10 chipsJohn W. Linville
"wl1251: add support for PG11 chips." accidentally enabled PG10 chips as well... Reported-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1251: use ieee80211_rx_ni()Kalle Valo
Because of SPI and SDIO wl1251 does everything in a workqueue, including calling ieee80211_rx() which should be called with bottom halves disabled. An error message is emitted because of this: NOHZ: local_softirq_pending 08 Fix this by using ieee80211_rx_ni(). Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1251: add support for PG11 chips.David-John Willis
This simple patch adds support for the PG11 variant of the WL1251 chip as used on the OpenPandora OMAP3 device. Signed-off-by: David-John Willis <John.Willis@Distant-earth.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: added missing packed modifier in some cmd structsLuciano Coelho
Some of the struct definitions in the wl1271_acx.h file were missing the __attribute__ ((packed)) modifier. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: fix endianess issuesLuciano Coelho
We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: added missing packed modifier in some acx structsLuciano Coelho
Some of the struct definitions in the wl1271_acx.h file were missing the __attribute__ ((packed)) modifier. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: fix sparse warnings about undeclared functionsLuciano Coelho
The following sparse warnings were fixed: drivers/net/wireless/wl12xx/wl1271_spi.c:199:6: warning: symbol 'wl1271_spi_read_busy' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:84:5: warning: symbol 'wl1271_cmd_cal_channel_tune' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:107:5: warning: symbol 'wl1271_cmd_cal_update_ref_point' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:132:5: warning: symbol 'wl1271_cmd_cal_p2g' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:153:5: warning: symbol 'wl1271_cmd_cal' was not declared. Should it be static? Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Set IEEE80211_FCTL_TODS in the null data templateJuuso Oikarinen
Set the IEEE80211_FCTL_TODS bit in the FC of the null data template. This is a mandatory requirement in specification. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Cc: Vidhya Govindan <vidhya.govindan@nokia.com> Cc: Janne Ylälehto <janne.ylalehto@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1251: rename spi device to wl1251Kalle Valo
During rename of the driver from wl12xx to wl1251 the spi device name was accidentally left as wl12xx. Rename it to wl1251 which is the proper name of the driver. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Fix filter configurationJuuso Oikarinen
Fix the filter configuration to properly work with the two phase filter configuration (prepare_multicast/configure_filter.) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: make sure PS is disabled in PLTLuciano Coelho
We cannot be in PS mode when running PLT tests, so we need to make sure we're in active mode. Also, we need to clear up the rx_counter when we stop PLT, otherwise it could cause problems when entering PLT again. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Correct memory handling for FW bootJuuso Oikarinen
Several memory allocation related failure cases were not properly handled by the driver - the result was that in low memory conditions booting of a corrupted FW could be attempted - and user space would not get proper failure code. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Remove unnecessary rx_descriptor memory allocationJuuso Oikarinen
Remove unnecessary RX descriptor memory allocation from the driver. The allocation was a remnant of the wl1251 driver. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Support for IPv4 ARP filteringJuuso Oikarinen
Add support for IPv4 ARP filtering in the driver. This will dramatically reduce the number of unnecessary interrupts by the device in conqested networks. This patch is based on a similar patch to wl1251 by Janne Ylälehto. Cc: Janne Ylälehto <janne.ylalehto@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 16:56:05 +0000