summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/zd1211rw
AgeCommit message (Collapse)Author
2007-04-23Add missing USRobotics Wireless Adapter (Model 5423) id into zd1211rwS.Çağlar Onur
USRobotics Wireless Adapter (Model 5423) works well with current zd1211rw driver also (i have tested 2.6.18, 2.6.20 and 2.6.21-rc7). It just needs its ID added to the list of devices. Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-10[PATCH] zd1211rw: Fix E2P_PHY_REG patchingDaniel Drake
Due to conflicting/confusing defines in the vendor driver, we were reading E2P_PHY_REG from the wrong location. CR157 patching was slightly incorrect in that the vendor driver only patches in an 8-bit value, whereas we were patching 24 bits. Additionally, CR157 patching was happening on both zd1211 and zd1211b, but this should only happen on zd1211. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-10[PATCH] zd1211rw: Reject AL2230S devicesDaniel Drake
zd1211rw currently detects AL2230S-based devices as AL2230, and hence programs the RF incorrectly. Transmit silently fails on this misconfiguration. After this patch, AL2230S devices are rejected with an error message, to avoid any confusion with an apparent driver bug. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-17Merge branch 'upstream' into upstream-jgarzikJohn W. Linville
Conflicts: net/ieee80211/softmac/ieee80211softmac_module.c net/ieee80211/softmac/ieee80211softmac_wx.c
2007-02-14[PATCH] zd1211rw: Readd zd_addr_t castDaniel Drake
Robert P.J. Day's recent commit ("getting rid of all casts of k[cmz]alloc() calls") introduced a sparse warning for zd1211rw, related to our type-checking of addresses. zd_chip.c:116:15: warning: implicit cast to nocast type This patch readds the type cast, it is correct. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-09Merge branch 'upstream' of ↵Jeff Garzik
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
2007-02-07[PATCH] zd1211rw: Remove noisy debug messageDaniel Drake
This causes a lot of uninteresting output in noisy environments, and doesn't really serve any purpose. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-07[PATCH] zd1211rw: Added error stats updateUlrich Kunitz
Added update of network device error statistics. Based on earlier work by Maxime Austruy. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-07[PATCH] zd1211rw: Fixed array size issue in reset_modeUlrich Kunitz
Andy Green found this issue. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-07[PATCH] zd1211rw: Reset device in the probe callUlrich Kunitz
This resets the device in the probe call. It does work with 2.6.19.2 including the softmac patches. It might fix the reboot/reset problems a lot of people reported. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-07[PATCH] zd1211rw: fix potential leak in usb_initMaxime Austruy
usb_init should call destroy_workqueue when usb_register fails. Signed-off-by: Maxime Austruy <maxime@tralhalla.org> Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Add ID for ZyXEL ZyAIR G-220 v2Daniel Drake
Tested by Marijn Schouten zd1211b chip 0586:340f v4810 high 00-13-49 AL2230_RF pa0 g--- FCC ID: I88G220V2 Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Add ID for Linksys WUSBF54GDaniel Drake
Tested by Henrik Hjelte zd1211b chip 13b1:0024 v4802 high 00-14-bf AL2230_RF pa0 ---- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Remove addressing abstractionDaniel Drake
Instead of passing our own custom 32-bit addresses around and translating them, this patch makes all our register address constants absolute and removes the translation. There are two ugly parts: - fw_reg_addr() is needed to compute addresses of firmware registers, as this is dynamic based upon firmware - inc_addr() needs a small hack to handle byte vs word addressing However, both of those are only small, and we don't use fw_regs a whole lot anyway. The bonuses here include simplicity and improved driver readability. Also, the fact that registers are now referenced by 16-bit absolute addresses (as opposed to 32-bit pseudo addresses) means that over 2kb compiled code size has been shaved off. Includes some touchups and sparse fixes from Ulrich Kunitz. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Consistency for address space constantsDaniel Drake
The zd1211rw address space has confused me once too many times. This patch introduces the following naming notation: Memory space is split into segments (cr, fw, eeprom) and segments may contain components (e.g. boot code inside eeprom). These names are arbitrary and only for the description below: x_START: Absolute address of segment start (previously these were named such as CR_BASE_OFFSET, but they weren't really offsets unless you were considering them as an offset to 0) x_LEN: Segment length x_y_LEN: Length of component y of segment x x_y_OFFSET: Relative address of component y into segment x. The absolute address for this component is (x_START + x_y_OFFSET) I also renamed EEPROM registers to EEPROM data. These 'registers' can't be written to using standard I/O and really represent predefined data from the vendor. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: 2 new ZD1211B device ID'sDaniel Drake
Philips SNU5600, tested by unibrow zd1211b chip 0471:1236 v4810 high 00-12-bf AL2230_RF pa0 g-- SMC Ez Connect 802.11g (SMCWUSB-G), tested by Victorino Sanz Prat zd1211b chip 083a:4505 v4810 full 00-13-f7 AL2230_RF pa0 g--N Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] zd1211rw: Generic HMAC initializationDaniel Drake
Many of the registers written during ZD1211 HMAC initialization are duplicated exactly for ZD1211B. Move the identical ones into a generic part, and write the hardware-specific ones separately. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-19[PATCH] zd1211rw: Call ieee80211_rx in taskletUlrich Kunitz
The driver called ieee80211_rx in hardware interrupt context. This has been against the intention of the ieee80211_rx function. It caused a bug in the crypto routines used by WPA. This patch calls ieee80211_rx in a tasklet. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-13[PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[wireless] zd1211rw: workqueue-related build fixesJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07Merge branch 'upstream' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream Conflicts: drivers/net/wireless/zd1211rw/zd_mac.h net/ieee80211/softmac/ieee80211softmac_assoc.c
2006-12-05[PATCH] zd1211rw: Support for multicast addressesUlrich Kunitz
Support for multicast adresses is implemented by supporting the set_multicast_list() function of the network device. Address filtering is supported by a group hash table in the device. This is based on earlier work by Benoit Papillaut. Fixes multicast packet reception and ipv6 connectivity: http://bugzilla.kernel.org/show_bug.cgi?id=7424 http://bugzilla.kernel.org/show_bug.cgi?id=7425 Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-05[PATCH] zd1211rw: Fill enc_capa in GIWRANGE handlerDaniel Drake
This is needed for NetworkManager users to connect to WPA networks. Pointed out by Matthew Campbell. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-05[PATCH] zd1211rw: zd_mac_rx isn't always called in IRQ contextDaniel Drake
e.g. usb 1-7: rx_urb_complete() *** first fragment *** usb 1-7: rx_urb_complete() *** second fragment *** drivers/net/wireless/zd1211rw/zd_mac.c:1063 ASSERT (((current_thread_info()->preempt_count) & (((1UL << (12))-1) << ((0 + 8) + 8)))) VIOLATED! [<f0299448>] zd_mac_rx+0x3e7/0x47a [zd1211rw] [<f029badc>] rx_urb_complete+0x22d/0x24a [zd1211rw] [<b028a22f>] urb_destroy+0x0/0x5 [<b01f0930>] kref_put+0x65/0x72 [<b0288cdf>] usb_hcd_giveback_urb+0x28/0x57 [<b02950c4>] qh_completions+0x296/0x2f6 [<b0294b21>] ehci_urb_done+0x70/0x7a [<b0294ea1>] qh_completions+0x73/0x2f6 [<b02951bc>] ehci_work+0x98/0x538 Remove the bogus assertion, and use dev_kfree_skb_any as pointed out by Ulrich Kunitz. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-05WorkQueue: Fix up arch-specific work items where possibleDavid Howells
Fix up arch-specific work items where possible to use the new work_struct and delayed_work structs. Three places that enqueue bits of their stack and then return have been marked with #error as this is not permitted. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-02[PATCH] zd1211rw: Use softmac ERP handling functionalityDaniel Drake
This adds zd1211rw driver support for the softmac functionality I added a while back. We now obey changes in basic rates, use short preamble if it is available (but long if the AP says it's not), and send self-CTS in the proper situations. Locking fixed and improved by Ulrich Kunitz. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Rename cs_rate to zd_rateDaniel Drake
These controlset rate constants are also applicable in places outside the controlset, such as in the RTS/CTS control register. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Allow channels 1-13 in JapanDaniel Drake
Eric Goff found that he could not use his ZD1211 device which is programmed for the Japan regulatory domain. It turns out that ZyDAS deviate from the spec here: they do not use the newer Japan region code (0x41) but their drivers do operate as if the newer Japan legal frequency range is in effect. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Optimized handling of zero length entries in length infoUlrich Kunitz
There are a high number of split USB transactions, which contain only one packet but have a length info field. This patch optimizes this code by stopping parsing the length info structure if a zero length field is encountered. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: cleanupsUlrich Kunitz
Bit-field constants in zd_chip.h are now defined using a shift expression. The value 0x08 is now (1 << 3). The fix is intended to improve readability. Remove misleading comment in zd_mac.c: The function already returns -EPERM in managed mode (IW_MODE_INFRA). Remove unused code in zd_mac.c: The unused code intended for debugging rx_status values is no longer useful. Added dump_stack() to ZD_ASSERT macro: Output of the stack helps to debug assertions. Keep in mind that the ZD_ASSERT() macro only results in code, if DEBUG is defined. Improved comments for filter_rx() zd_usb.c: Added driver name to module init and exit functions Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Remove IW_FREQ_AUTO supportDaniel Drake
http://bugzilla.kernel.org/show_bug.cgi?id=7399 zd1211rw's support for IW_FREQ_AUTO is broken: when specified, the driver tries to change to a channel specified in an uninitialized integer. As IW_FREQ_AUTO is hard to implement properly, the solution (at least for now) is to drop support for it and start ignoring the flags like all other wireless drivers do. This has the added advantage that kismet also starts working with zd1211rw, even though kismet requesting IW_FREQ_AUTO is also a bug (fixed in their svn) Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Add ID for Belkin F5D7050 v4000Daniel Drake
zd1211b chip 050d:705c v4810 high 00-17-3f AL2230_RF pa0 g--N Tested by Bryan Barnard Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Add ID for Planex GW-US54MiniDaniel Drake
zd1211 chip 14ea:ab13 v4330 high 00-90-cc AL2230_RF pa0 g--- Tested by Tetsuya Yatagai. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Add ID for ZyXEL G-220Daniel Drake
Tested by Newsome on IRC zd1211 chip 0586:3401 v4330 high 00-13-49 AL2230_RF pa0 g--- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Add 3 more device IDsDaniel Drake
iNexQ UR055g: Tested by Todor T Zviskov zd1211 chip 1435:0711 v4330 high 00-10-a7 AL2230_RF pa0 g-- ZyXEL AG-225, FCC ID SI5WUB410: Tested by Nathan zd1211 chip 0586:3409 v4810 full 00-13-49 AL7230B_RF pa0 g--- Yakumo QuickWLAN USB: Tested by EdB zd1211 chip 0b3b:1630 v4330 high 00-01-36 RF2959_RF pa0 --- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-11-28Revert "[PATCH] zd1211rw: Removed unneeded packed attributes"John W. Linville
This reverts commit 4e1bbd846d00a245dcf78b6b331d8a9afed8e6d7. Quoth Daniel Drake <dsd@gentoo.org>: "A user reported that commit 4e1bbd846d00a245dcf78b6b331d8a9afed8e6d7 (Remove unneeded packed attributes) breaks the zd1211rw driver on ARM." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-11-28[PATCH] zd1211rw: Fix of a locking bugUlrich Kunitz
This patch fixes the bug as reported in the kernel bug tracker under the id 7244. The bug was simply that the interrupt lock has been locked outside an interrupt without blocking the interrupt. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-17[PATCH] zd1211rw: fix build-break caused by association race fixJohn W. Linville
The break was caused by 7c28ad2d83ecc637237fe684659a6afbce0bb2a8. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-25[PATCH] zd1211rw: Add LED supportUlrich Kunitz
This patch includes a big cleanup of the existing unused LED code, and adds support for controlling the LED. The link LED will blink if the device is not associated. The LED switches between 2 seconds on and 1 second off. If the device is associated the LED is switched on. The link LED also indicates packet TX. I do a little bit more led resetting than the vendor driver, but the device works now as expected for single LED and double LED devices. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-25[PATCH] zd1211rw: Added workqueueUlrich Kunitz
For housekeeping and watchdog tasks a workqueue is created. The central workqueue is not used to prevent crashes creates by bugs. It might be changed, when the housekeeping is stabilized. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-25[PATCH] zd1211rw: Removes wrong assertionsUlrich Kunitz
Checking whether a mutex is not locked directly before mutex_lock() is called, doesn't make sense. The whole point of mutex_lock() is to block, if the mutex is locked. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-25[PATCH] zd1211rw: 16-bit writes for physical control registersUlrich Kunitz
Caused by the fact that physical control registers appear to have only a width of 16 bit, 32-bit writes are not required. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-25[PATCH] WE-21 for zd1211rwDaniel Drake
Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] zd1211rw: Removed unneeded packed attributesUlrich Kunitz
Inspired by an e-mail by Stephen Hemminger I decided to remove all unneeded packed attributes from the code where the member variables are already aligned. This avoids horrible code being generated on some architectures. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] zd1211rw: Add ID for Asus WL-159gDaniel Drake
Tested by Vincent TOUCHARD zd1211 chip 0b05:170c v4802 high 00-11-d8 AL2230_RF pa0 g--- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54Daniel Drake
Tested by Martin Dummer. zd1211 chip 0b3b:5630 v4330 high 00-01-e3 RF2959_RF pa0 --- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11Merge branch 'upstream-fixes' into upstreamJohn W. Linville
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-14 05:10:17 +0000