summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2011-12-02iwlwifi: change the default behavior of watchdog timerWey-Yi Guy
The current default watchdog timer is enabled, but we are seeing issues on legacy devices. So change the default setting of watchdog timer to per device based. But user still can use the "wd_disable" module parameter to overwrite the system setting Cc: stable@vger.kernel.org #3.0+ Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-02iwlwifi: do not re-configure HT40 after associatedWey-Yi Guy
The ht40 setting should not change after association unless channel switch This fix a problem we are seeing which cause uCode assert because driver sending invalid information and make uCode confuse Here is the firmware assert message: kernel: iwlagn 0000:03:00.0: Microcode SW error detected. Restarting 0x82000000. kernel: iwlagn 0000:03:00.0: Loaded firmware version: 17.168.5.3 build 42301 kernel: iwlagn 0000:03:00.0: Start IWL Error Log Dump: kernel: iwlagn 0000:03:00.0: Status: 0x000512E4, count: 6 kernel: iwlagn 0000:03:00.0: 0x00002078 | ADVANCED_SYSASSERT kernel: iwlagn 0000:03:00.0: 0x00009514 | uPc kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink1 kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink2 kernel: iwlagn 0000:03:00.0: 0x0000D1F2 | interruptlink1 kernel: iwlagn 0000:03:00.0: 0x00000000 | interruptlink2 kernel: iwlagn 0000:03:00.0: 0x01008035 | data1 kernel: iwlagn 0000:03:00.0: 0x0000C90F | data2 kernel: iwlagn 0000:03:00.0: 0x000005A7 | line kernel: iwlagn 0000:03:00.0: 0x5080B520 | beacon time kernel: iwlagn 0000:03:00.0: 0xCC515AE0 | tsf low kernel: iwlagn 0000:03:00.0: 0x00000003 | tsf hi kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp1 kernel: iwlagn 0000:03:00.0: 0x29703BF0 | time gp2 kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp3 kernel: iwlagn 0000:03:00.0: 0x000111A8 | uCode version kernel: iwlagn 0000:03:00.0: 0x000000B0 | hw version kernel: iwlagn 0000:03:00.0: 0x00480303 | board version kernel: iwlagn 0000:03:00.0: 0x09E8004E | hcmd kernel: iwlagn 0000:03:00.0: CSR values: kernel: iwlagn 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) kernel: iwlagn 0000:03:00.0: CSR_HW_IF_CONFIG_REG: 0X00480303 kernel: iwlagn 0000:03:00.0: CSR_INT_COALESCING: 0X0000ff40 kernel: iwlagn 0000:03:00.0: CSR_INT: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_INT_MASK: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_FH_INT_STATUS: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GPIO_IN: 0X00000030 kernel: iwlagn 0000:03:00.0: CSR_RESET: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GP_CNTRL: 0X080403c5 kernel: iwlagn 0000:03:00.0: CSR_HW_REV: 0X000000b0 kernel: iwlagn 0000:03:00.0: CSR_EEPROM_REG: 0X07d60ffd kernel: iwlagn 0000:03:00.0: CSR_EEPROM_GP: 0X90000001 kernel: iwlagn 0000:03:00.0: CSR_OTP_GP_REG: 0X00030001 kernel: iwlagn 0000:03:00.0: CSR_GIO_REG: 0X00080044 kernel: iwlagn 0000:03:00.0: CSR_GP_UCODE_REG: 0X000093bb kernel: iwlagn 0000:03:00.0: CSR_GP_DRIVER_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP1: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP2: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_LED_REG: 0X00000078 kernel: iwlagn 0000:03:00.0: CSR_DRAM_INT_TBL_REG: 0X88214dd2 kernel: iwlagn 0000:03:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 kernel: iwlagn 0000:03:00.0: CSR_ANA_PLL_CFG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_HW_REV_WA_REG: 0X0001001a kernel: iwlagn 0000:03:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 kernel: iwlagn 0000:03:00.0: FH register values: kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X21316d00 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021479c0 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000060 kernel: iwlagn 0000:03:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries kernel: ------------[ cut here ]------------ WARNING: at net/mac80211/util.c:1208 ieee80211_reconfig+0x1f1/0x407() kernel: Hardware name: 4290W4H kernel: Pid: 1896, comm: kworker/0:0 Not tainted 3.1.0 #2 kernel: Call Trace: kernel: [<ffffffff81036558>] ? warn_slowpath_common+0x73/0x87 kernel: [<ffffffff813b8966>] ? ieee80211_reconfig+0x1f1/0x407 kernel: [<ffffffff8139e8dc>] ? ieee80211_recalc_smps_work+0x32/0x32 kernel: [<ffffffff8139e95a>] ? ieee80211_restart_work+0x7e/0x87 kernel: [<ffffffff810472fa>] ? process_one_work+0x1c8/0x2e3 kernel: [<ffffffff810480c9>] ? worker_thread+0x17a/0x23a kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff8104ba97>] ? kthread+0x7a/0x82 kernel: [<ffffffff813d21b4>] ? kernel_thread_helper+0x4/0x10 kernel: [<ffffffff8104ba1d>] ? kthread_flush_work_fn+0x11/0x11 kernel: [<ffffffff813d21b0>] ? gs_change+0xb/0xb Cc: <stable@kernel.org> 3.1+ Reported-by: Udo Steinberg <udo@hypervisor.org> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-02iwlagn: fix HW crypto for TX-only keysJohannes Berg
Group keys in IBSS or AP mode are not programmed into the device since we give the key to it with every TX packet. However, we do need mac80211 to create the MMIC & PN in all cases. Move the code around to set the key flags all the time. We set them even when the key is removed again but that is obviously harmless. Cc: stable@vger.kernel.org Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28ath9k: Revert change that broke AR928X on Acer Ferrari OneRafael J. Wysocki
Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by commit 2577c6e8f2320f1d2f09be122efef5b9118efee4 (ath9k_hw: Add support for AR946/8x chipsets) that caused a nasty regression to appear on my Acer Ferrari One (the box locks up entirely at random times after the wireless has been started without any way to get debug information out of it). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28rtlwifi: fix lps_lock deadlockStanislaw Gruszka
rtl_lps_leave can be called from interrupt context, so we have to disable interrupts when taking lps_lock. Below is full lockdep info about deadlock: [ 93.815269] ================================= [ 93.815390] [ INFO: inconsistent lock state ] [ 93.815472] 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815556] --------------------------------- [ 93.815635] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 93.815743] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 93.815832] (&(&rtlpriv->locks.lps_lock)->rlock){+.?...}, at: [<ffffffffa025dad6>] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.815947] {SOFTIRQ-ON-W} state was registered at: [ 93.815947] [<ffffffff8108e10d>] __lock_acquire+0x369/0xd0c [ 93.815947] [<ffffffff8108efb3>] lock_acquire+0xf3/0x13e [ 93.815947] [<ffffffff814e981d>] _raw_spin_lock+0x45/0x79 [ 93.815947] [<ffffffffa025de34>] rtl_swlps_rf_awake+0x5a/0x76 [rtlwifi] [ 93.815947] [<ffffffffa025aec0>] rtl_op_config+0x12a/0x32a [rtlwifi] [ 93.815947] [<ffffffffa01d614b>] ieee80211_hw_config+0x124/0x129 [mac80211] [ 93.815947] [<ffffffffa01e0af3>] ieee80211_dynamic_ps_disable_work+0x32/0x47 [mac80211] [ 93.815947] [<ffffffff81075aa5>] process_one_work+0x205/0x3e7 [ 93.815947] [<ffffffff81076753>] worker_thread+0xda/0x15d [ 93.815947] [<ffffffff8107a119>] kthread+0xa8/0xb0 [ 93.815947] [<ffffffff814f3184>] kernel_thread_helper+0x4/0x10 [ 93.815947] irq event stamp: 547822 [ 93.815947] hardirqs last enabled at (547822): [<ffffffff814ea1a7>] _raw_spin_unlock_irqrestore+0x45/0x61 [ 93.815947] hardirqs last disabled at (547821): [<ffffffff814e9987>] _raw_spin_lock_irqsave+0x22/0x8e [ 93.815947] softirqs last enabled at (547790): [<ffffffff810623ed>] _local_bh_enable+0x13/0x15 [ 93.815947] softirqs last disabled at (547791): [<ffffffff814f327c>] call_softirq+0x1c/0x30 [ 93.815947] [ 93.815947] other info that might help us debug this: [ 93.815947] Possible unsafe locking scenario: [ 93.815947] [ 93.815947] CPU0 [ 93.815947] ---- [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] <Interrupt> [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] [ 93.815947] *** DEADLOCK *** [ 93.815947] [ 93.815947] no locks held by swapper/0. [ 93.815947] [ 93.815947] stack backtrace: [ 93.815947] Pid: 0, comm: swapper Not tainted 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815947] Call Trace: [ 93.815947] <IRQ> [<ffffffff814dfd00>] print_usage_bug+0x1e7/0x1f8 [ 93.815947] [<ffffffff8101a849>] ? save_stack_trace+0x2c/0x49 [ 93.815947] [<ffffffff8108d55c>] ? print_irq_inversion_bug.part.18+0x1a0/0x1a0 [ 93.815947] [<ffffffff8108dc8a>] mark_lock+0x106/0x220 [ 93.815947] [<ffffffff8108e099>] __lock_acquire+0x2f5/0xd0c [ 93.815947] [<ffffffff810152af>] ? native_sched_clock+0x34/0x36 [ 93.830125] [<ffffffff810152ba>] ? sched_clock+0x9/0xd [ 93.830125] [<ffffffff81080181>] ? sched_clock_local+0x12/0x75 [ 93.830125] [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffff8108efb3>] lock_acquire+0xf3/0x13e [ 93.830125] [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffff814e981d>] _raw_spin_lock+0x45/0x79 [ 93.830125] [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffff81422467>] ? skb_dequeue+0x62/0x6d [ 93.830125] [<ffffffffa025dad6>] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffffa025f677>] _rtl_pci_ips_leave_tasklet+0xe/0x10 [rtlwifi] [ 93.830125] [<ffffffff8106281f>] tasklet_action+0x8d/0xee [ 93.830125] [<ffffffff810629ce>] __do_softirq+0x112/0x25a [ 93.830125] [<ffffffff814f327c>] call_softirq+0x1c/0x30 [ 93.830125] [<ffffffff81010bf6>] do_softirq+0x4b/0xa1 [ 93.830125] [<ffffffff81062d7d>] irq_exit+0x5d/0xcf [ 93.830125] [<ffffffff814f3b7e>] do_IRQ+0x8e/0xa5 [ 93.830125] [<ffffffff814ea533>] common_interrupt+0x73/0x73 [ 93.830125] <EOI> [<ffffffff8108b825>] ? trace_hardirqs_off+0xd/0xf [ 93.830125] [<ffffffff812bb6d5>] ? intel_idle+0xe5/0x10c [ 93.830125] [<ffffffff812bb6d1>] ? intel_idle+0xe1/0x10c [ 93.830125] [<ffffffff813f8d5e>] cpuidle_idle_call+0x11c/0x1fe [ 93.830125] [<ffffffff8100e2ef>] cpu_idle+0xab/0x101 [ 93.830125] [<ffffffff814c6373>] rest_init+0xd7/0xde [ 93.830125] [<ffffffff814c629c>] ? csum_partial_copy_generic+0x16c/0x16c [ 93.830125] [<ffffffff81d4bbb0>] start_kernel+0x3dd/0x3ea [ 93.830125] [<ffffffff81d4b2c4>] x86_64_start_reservations+0xaf/0xb3 [ 93.830125] [<ffffffff81d4b140>] ? early_idt_handlers+0x140/0x140 [ 93.830125] [<ffffffff81d4b3ca>] x86_64_start_kernel+0x102/0x111 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=755154 Reported-by: vjain02@students.poly.edu Reported-and-tested-by: Oliver Paukstadt <pstadt@sourcentral.org> Cc: stable@vger.kernel.org Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22Revert "rt2800pci: handle spurious interrupts"John W. Linville
This reverts commit 4ba7d9997869d25bd223dea7536fc1ce9fab3b3b. The original patch was a misguided attempt to improve performance on some hardware that is apparently prone to spurious interrupt generation. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22Revert "rt2x00: handle spurious pci interrupts"John W. Linville
This reverts commit 23085d5796561625db4143a671f1de081f66ef08. The original patch was a misguided attempt to improve performance on some hardware that is apparently prone to spurious interrupt generation. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-21prism54: potential memory corruption in prism54_get_essid()Dan Carpenter
"dwrq->length" is the capped version of "essid->length". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17p54spi: Fix workqueue deadlockMichael Büsch
priv->work must not be synced while priv->mutex is locked, because the mutex is taken in the work handler. Move cancel_work_sync down to after the device shutdown code. This is safe, because the work handler checks fw_state and bails out early in case of a race. Signed-off-by: Michael Buesch <m@bues.ch> Cc: <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17p54spi: Add missing spin_lock_initMichael Büsch
The tx_lock is not initialized properly. Add spin_lock_init(). Signed-off-by: Michael Buesch <m@bues.ch> Cc: <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17rt2x00: Fix efuse EEPROM reading on PPC32.Gertjan van Wingerde
Fix __le32 to __le16 conversion of the first word of an 8-word block of EEPROM read via the efuse method. Reported-and-tested-by: Ingvar Hagelund <ingvar@redpill-linpro.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> CC: <stable@vger.kernel.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17rt2x00: handle spurious pci interruptsStanislaw Gruszka
We have documented case of very bad performance issue on rt2800pci device, because it generate spurious interrupt, what cause irq line is disabled: https://bugzilla.redhat.com/show_bug.cgi?id=658451 We already address that problem in separate patch by returning IRQ_HANDLED from interrupt handler. We think similar fix is needed for other rt2x00 PCI devices, because users report performance problems on these devices too. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17rt2800pci: handle spurious interruptsStanislaw Gruszka
Some devices may generate spurious interrupts, we have to handle them otherwise interrupt line will be disabled with below message and driver will not work: [ 2052.114334] irq 17: nobody cared (try booting with the "irqpoll" option) [ 2052.114339] Pid: 0, comm: swapper Tainted: P 2.6.35.6-48.fc14.x86_64 #1 [ 2052.114341] Call Trace: [ 2052.114342] <IRQ> [<ffffffff810a6e2b>] __report_bad_irq.clone.1+0x3d/0x8b [ 2052.114349] [<ffffffff810a6f93>] note_interrupt+0x11a/0x17f [ 2052.114352] [<ffffffff810a7a73>] handle_fasteoi_irq+0xa8/0xce [ 2052.114355] [<ffffffff8100c2ea>] handle_irq+0x88/0x90 [ 2052.114357] [<ffffffff8146f034>] do_IRQ+0x5c/0xb4 [ 2052.114360] [<ffffffff81469593>] ret_from_intr+0x0/0x11 [ 2052.114361] <EOI> [<ffffffff8102b7f9>] ? native_safe_halt+0xb/0xd [ 2052.114366] [<ffffffff81010f03>] ? need_resched+0x23/0x2d [ 2052.114367] [<ffffffff8101102a>] default_idle+0x34/0x4f [ 2052.114370] [<ffffffff81008325>] cpu_idle+0xaa/0xcc [ 2052.114373] [<ffffffff81461f2a>] start_secondary+0x24d/0x28e [ 2052.114374] handlers: [ 2052.114375] [<ffffffff81332944>] (usb_hcd_irq+0x0/0x7c) [ 2052.114378] [<ffffffffa00697da>] (rt2800pci_interrupt+0x0/0x18d [rt2800pci]) [ 2052.114384] Disabling IRQ #17 Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=658451 Reported-and-tested-by: Amir Hedayaty <hedayaty@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-15Net, libertas: Resolve memory leak in if_spi_host_to_card()Jesper Juhl
If we hit the default case in the switch in if_spi_host_to_card() we'll leak the memory we allocated for 'packet'. This patch resolves the leak by freeing the allocated memory in that case. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-15rt2x00: Fix sleep-while-atomic bug in powersaving code.Gertjan van Wingerde
The generic powersaving code that determines after reception of a frame whether the device should go back to sleep or whether is could stay awake was calling rt2x00lib_config directly from RX tasklet context. On a number of the devices this call can actually sleep, due to having to confirm that the sleeping commands have been executed successfully. Fix this by moving the call to rt2x00lib_config to a workqueue call. This fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=731672 Tested-by: Tomas Trnka <tomastrnka@gmx.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-15rt2x00: Add USB device ID of Buffalo WLI-UC-GNHP.Gertjan van Wingerde
This is reported to be an RT3070 based device. Reported-by: Teika Kazura <teika@lavabit.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11mwifiex: fix association issue with AP configured in hidden SSID modeAmitkumar Karwar
Firmware expects 'max_ssid_length' field in 'struct mwifiex_ie_types_wildcard_ssid_params' to be '0' for performing SSID specific scan. Currently driver updates it with an actual SSID length. Hence UUT is not able to find the AP configured in hidden SSID mode in scan results and association fails. max_ssid_length is filled with '0' to fix the issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11iwlwifi: avoid a panic when unloading the module with RF KillEmmanuel Grumbach
When HW RF kill switch is set to kill the radio, our NIC issues an interrupt after we stop the APM module. When we unload the module, the driver disables and cleans the interrupts before stopping the APM. So we have a real interrupt (inta not zero) pending. When this interrupts pops up the tasklet has already been killed and we crash. Here is a logical description of the flow: disable and clean interrupts synchronize interrupts kill the tasklet stop the APM <<== creates an RF kill interrupt free_irq <<== somehow our ISR is called here and we crash Here is the panic message: [ 201.313636] BUG: unable to handle kernel paging request at ffff8800911b7150 [ 201.314541] IP: [<ffffffff8106d652>] tasklet_action+0x62/0x130 [ 201.315149] PGD 1c06063 PUD db37f067 PMD db408067 PTE 80000000911b7160 [ 201.316456] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 201.317324] CPU 1 [ 201.317495] Modules linked in: arc4 iwlwifi(-) mac80211 cfg80211 netconsole configfs binfmt_misc i915 drm_kms_helper drm uvcvideo i2c_algo_bit videodev dell_laptop dcdbas intel_agp dell_wmi intel_ips psmouse intel_gtt v4l2_compat_ioctl32 asix usbnet mii serio_raw video sparse_keymap firewire_ohci sdhci_pci sdhci firewire_core e1000e crc_itu_t [last unloaded: configfs] [ 201.323839] [ 201.324015] Pid: 2061, comm: modprobe Not tainted 3.1.0-rc9-wl #4 Dell Inc. Latitude E6410/0667CC [ 201.324736] RIP: 0010:[<ffffffff8106d652>] [<ffffffff8106d652>] tasklet_action+0x62/0x130 [ 201.325128] RSP: 0018:ffff88011bc43ea0 EFLAGS: 00010286 [ 201.325338] RAX: ffff88008ae70000 RBX: ffff8800911b7150 RCX: ffff88008ae70028 [ 201.325555] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88008ae70000 [ 201.325775] RBP: ffff88011bc43ec0 R08: 0000000000000000 R09: 0000000000000000 [ 201.325994] R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000001 [ 201.326212] R13: 0000000000000006 R14: 0000000000000100 R15: ffff88008e259fd8 [ 201.326431] FS: 00007f4b90ea9700(0000) GS:ffff88011bc40000(0000) knlGS:0000000000000000 [ 201.326657] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 201.326864] CR2: ffff8800911b7150 CR3: 000000008fd6d000 CR4: 00000000000006e0 [ 201.327083] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 201.327302] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 201.327521] Process modprobe (pid: 2061, threadinfo ffff88008e258000, task ffff88008ae70000) [ 201.327747] Stack: [ 201.330494] 0000000000000046 0000000000000030 0000000000000001 0000000000000006 [ 201.333870] ffff88011bc43f30 ffffffff8106cd8a ffffffff811e1016 ffff88011bc43f08 [ 201.337186] 0000000100000046 ffff88008e259fd8 0000000a10be2160 0000000000000006 [ 201.340458] Call Trace: [ 201.342994] <IRQ> [ 201.345656] [<ffffffff8106cd8a>] __do_softirq+0xca/0x250 [ 201.348185] [<ffffffff811e1016>] ? pde_put+0x76/0x90 [ 201.350730] [<ffffffff8131aeae>] ? do_raw_spin_unlock+0x5e/0xb0 [ 201.353261] [<ffffffff811e1016>] ? pde_put+0x76/0x90 [ 201.355776] [<ffffffff8163ccfc>] call_softirq+0x1c/0x30 [ 201.358287] [<ffffffff8101531d>] do_softirq+0x9d/0xd0 [ 201.360823] [<ffffffff8106cb05>] irq_exit+0xd5/0xf0 [ 201.363330] [<ffffffff8163d5d6>] do_IRQ+0x66/0xe0 [ 201.365819] [<ffffffff81632673>] common_interrupt+0x73/0x73 [ 201.368257] <EOI> Cc: <stable@kernel.org> 3.1+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09wireless: libertas: fix unaligned le64 accessesSteven Miao
use get_unaligned_le64() to get timestamp Signed-off-by: Steven Miao <realmz6@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-08wl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids ↵Eyal Shapira
are in filters A minor fix for the check that verifies that all given SSIDs (in req) exist in the filters (the match sets) Signed-off-by: Eyal Shapira <eyal@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-08ath: Fix NULL ptr dereference in ath_reg_apply_world_flagsHelmut Schaa
This happens with devices using a regulatory domain 0x68 that are only 5Ghz capable because ath_reg_apply_active_scan_flags assumes that we always have a 2,4Ghz band. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 00000003 00000024 $ 4 : 00000003 000016c1 82f900ac 00000024 $ 8 : 00000000 82cda304 0058bad8 00000005 $12 : 005908f8 001e8481 00000003 1dcd6500 $16 : 00000002 00000000 82c700c0 82c700c0 $20 : 82d415e4 82c70d64 82c70200 82c715bc $24 : 00000000 11e1a300 $28 : 82ce2000 82ce3c70 82c715a8 82cd8384 Hi : 00000000 Lo : 0000001e epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath] Not tainted ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath] Status: 1000d403 KERNEL EXL IE Cause : 80800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev ie Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000) Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068 82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40 00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8 00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000 82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0 ... Call Trace: [<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath] [<82cd88f4>] ath_regd_init+0x464/0x488 [ath] [<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k] [<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k] [<80181de0>] pci_device_probe+0x64/0xa4 [<8019e874>] driver_probe_device+0xb8/0x190 [<8019e9b8>] __driver_attach+0x6c/0xa4 [<8019dfc0>] bus_for_each_dev+0x60/0xb0 [<8019d744>] bus_add_driver+0xc4/0x25c [<8019ed6c>] driver_register+0xe0/0x198 [<8018206c>] __pci_register_driver+0x50/0xe0 [<82dd0010>] ath9k_init+0x10/0x54 [ath9k] [<8006b4a0>] do_one_initcall+0x68/0x1ec [<800a901c>] sys_init_module+0xec/0x23c [<80062544>] stack_done+0x20/0x3c Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07net, wireless, mwifiex: Fix mem leak in mwifiex_update_curr_bss_params()Jesper Juhl
If kmemdup() fails we leak the memory allocated to bss_desc. This patch fixes the leak. I also removed the pointless default assignment of 'NULL' to 'bss_desc' while I was there anyway. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07brcm80211: smac: eliminate a null pointer dereference in dma.cArend van Spriel
Though it's unlikely, di may be null, so we can't dereference di->dma.dmactrlflags until we've checked it. Move this de-reference after the check, and adjust the error message to not require de-referencing di. This is based upon Julia's original patch: <1319846297-2985-2-git-send-email-julia@diku.dk> Reported-by: Julia Lawall <julia@diku.dk> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07b43: HT-PHY: report signal to mac80211Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07b43: fill ctl1 word on all newer PHYs, fix PHY errorsRafał Miłecki
This fixes PHY transmission errors reported on some LP-PHY and HT-PHY cards. For LP-PHY they were quite rare and not really noticable. On HT-PHY they were critical, OFDM rates were not available at all. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02iwlwifi: don't perform "echo test" when cmd queue stuckWey-Yi Guy
Perform "echo test" when cmd queue stuck detected, somethime it will cause calltrace. I am not sure how to fix it yet, just remove the action now until find a better way to handle it. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02b43: Remove unneeded messageLarry Finger
The driver can spam the logs with "RX: Packet dropped" messages. These drops originate from 1. a correpted PLCP, 2. decryption errors, and 3. packet size underruns. Condition #3 logs a separate message, thus no dropped message is needed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02iwlwifi: allow pci_enable_msi failWey-Yi Guy
Continue the init process even fail to enable msi out_iounmap is no longer used, remove it Reported-by: werner <w.landgraf@ru.ru> Tested-by: werner <w.landgraf@ru.ru> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02libertas: ensure we clean up a scan request properlyAndres Salomon
Commit 2e30168b ("libertas: terminate scan when stopping interface") adds cleanup code to lbs_eth_stop to call cfg80211_scan_done if there's an outstanding cfg80211_scan_request. However, it assumes that the scan request was allocated via the cfg80211 stack. Libertas has its own internal allocation method, kept track of with priv->internal_scan. This doesn't set scan_req->wiphy, amongst other things, which results in hitting a BUG() when we call cfg80211_scan_done on the request. This provides a function to take care of the low-level scan_req cleanup details. We simply call that to deal with finishing up scan requests. The bug we were hitting was: [ 964.321495] kernel BUG at net/wireless/core.h:87! [ 964.329970] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 964.341963] pgd = dcf80000 ... [ 964.849998] 9fe0: 00000000 beb417b8 4018e280 401e822c 60000010 00000004 00000000 00000000 [ 964.865007] [<c003104c>] (__bug+0x1c/0x28) from [<c0384ffc>] (cfg80211_scan_done+0x54/0x6c) [ 964.895324] [<c0384ffc>] (cfg80211_scan_done+0x54/0x6c) from [<bf028bac>] (lbs_eth_stop+0x10c/0x188 [libertas]) [ 964.895324] [<bf028bac>] (lbs_eth_stop+0x10c/0x188 [libertas]) from [<c03002a0>] (__dev_close_many+0x94/0xc4) [ 964.918995] [<c03002a0>] (__dev_close_many+0x94/0xc4) from [<c030037c>] (dev_close_many+0x78/0xe0) Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02ath9k_hw: Fix noise floor calibration timeout on fast channel changeRajkumar Manoharan
During the fast channel change noise floor values are being loaded twice at init_cal and after channel_change. The commit "ath9k_hw: Improve fast channel change for AR9003 chips" overlooked it that caused failure to load nf while doing bgscan. This patch performs noise floor calibration after the fast and full reset. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02ath9k_hw: Update AR9485 initvals to fix system hang issueRajkumar Manoharan
This patch fixes system hang when resuming from S3 state and lower rate sens failure issue. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02carl9170: fix AMPDU TX_CTL_REQ_TX_STATUS handlingChristian Lamparter
Previously the driver did not care if TX_CTL_REQ_TX_STATUS was set on aggregated frames or not and it would silently drop successfully sent frames if possible [much like: "no news is good news!"]. But, TX_CTL_REQ_TX_STATUS was invented for a reason and no tx status report should ever be dropped if it is set. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02ath9k_hw: Fix regression of register offset of AR9330/AR9340Rajkumar Manoharan
The commit ce407afc10 introduced regression for AR9330/AR9340 register offsets. Some of the register offsets are common for AR9330/AR9340/AR9485 except AR9380. Fix that. Cc: stable@kernel.org [3.1.0+] Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02ath9k_hw: Fix radio retention for AR9462Rajkumar Manoharan
IQ calibration during fast channel change sometimes failed with RTT. And also restoring invalid radio retention readings during init cal could cause failure to set the channel properly. This patch counts the valid rtt history readings and clears rtt mask. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02ath9k_hw: Fix regression of register offset for AR9003 chipsRajkumar Manoharan
My recent commits (3782c69d, 324c74a) introduced regression for register offset selection that based on the macversion. Not using parentheses in proper manner for ternary operator leads to select wrong offset for the registers. This issue was observed with AR9462 chip that immediate disconnect after the association with the following message ieee80211 phy3: wlan0: Failed to send nullfunc to AP 00:23:69:12:ea:47 after 500ms, disconnecting. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02iwlagn: fix the race in the unmapping of the HCMDEmmanuel Grumbach
As Stanislaw pointed out, my patch iwlagn: fix a race in the unmapping of the TFDs solved only part of the problem. The race still exists for TFDs of the host commands. Fix that too. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-25Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits) PM / Clocks: Remove redundant NULL checks before kfree() PM / Documentation: Update docs about suspend and CPU hotplug ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist. ARM: mach-shmobile: sh7372 A4R support (v4) ARM: mach-shmobile: sh7372 A3SP support (v4) PM / Sleep: Mark devices involved in wakeup signaling during suspend PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image PM / Hibernate: Do not initialize static and extern variables to 0 PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too PM / Hibernate: Add resumedelay kernel param in addition to resumewait MAINTAINERS: Update linux-pm list address PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep=nonvs PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep=nonvs PM / Hibernate: Add resumewait param to support MMC-like devices as resume file PM / Hibernate: Fix typo in a kerneldoc comment PM / Hibernate: Freeze kernel threads after preallocating memory PM: Update the policy on default wakeup settings PM / VT: Cleanup #if defined uglyness and fix compile error PM / Suspend: Off by one in pm_suspend() PM / Hibernate: Include storage keys in hibernation image on s390 ...
2011-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits) dp83640: free packet queues on remove dp83640: use proper function to free transmit time stamping packets ipv6: Do not use routes from locally generated RAs |PATCH net-next] tg3: add tx_dropped counter be2net: don't create multiple RX/TX rings in multi channel mode be2net: don't create multiple TXQs in BE2 be2net: refactor VF setup/teardown code into be_vf_setup/clear() be2net: add vlan/rx-mode/flow-control config to be_setup() net_sched: cls_flow: use skb_header_pointer() ipv4: avoid useless call of the function check_peer_pmtu TCP: remove TCP_DEBUG net: Fix driver name for mdio-gpio.c ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces ipv4: fix ipsec forward performance regression jme: fix irq storm after suspend/resume route: fix ICMP redirect validation net: hold sock reference while processing tx timestamps tcp: md5: add more const attributes Add ethtool -g support to virtio_net ... Fix up conflicts in: - drivers/net/Kconfig: The split-up generated a trivial conflict with removal of a stale reference to Documentation/networking/net-modules.txt. Remove it from the new location instead. - fs/sysfs/dir.c: Fairly nasty conflicts with the sysfs rb-tree usage, conflicting with Eric Biederman's changes for tagged directories.
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
2011-10-17Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem
2011-10-14libertas: fix changing interface type when interface is downDaniel Drake
The recent changes to only power the device when the interface up introduced a bug: changing interface type, legal when the interface is down, performs device I/O. Fix this functionality by validating and recording the interface type when the change is requested, but only applying the change if/when the interface is brought up. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k: Rename AR9480 into AR9462Rajkumar Manoharan
Renamed to be in sync with Marketing term and to avoid confusion with other chip names. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Rename AR9480 -> AR9462 initvalsRajkumar Manoharan
The AR946/8x chips are 2x2 Dual band with BT support. In order to avoid misleading with other chips and to be in sync with marketing team's term, AR9480 is renamed as AR9462. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Do fast channel change based on reusable calibration resultsRajkumar Manoharan
Support the fast channel change across band switch only when there are available of reusable cabliration results. And also observed that doing agc control calibration on fastcc, sometimes causing calibration timeout. Hence changing agc control to be run only on full chip reset. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Add radio retention support for AR9480Rajkumar Manoharan
Supported calibrations of radio retention table (RTT) are - DC offset - Filter - Peak detect Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Update normal/min noise floor value for AR9480Rajkumar Manoharan
To improve sensitivity for AR9480, the normal and minimum noise floor values of both bands are updated. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Support fast channel change on 5GHz for AR9003 chipsRajkumar Manoharan
The commit "ath9k_hw: Improve fast channel change for AR9003 chips" fixes the fast channel change issue for AR9003 chips that was originally observed in AR9382 chip. Hence enabling fastcc support again for 11A channel for AR9003 chips. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Cleanup Tx calibrations for AR9003 chipsRajkumar Manoharan
Currently Tx IQ calibration is enabled by default for all AR9003 chips. But for AR9480, the calibration status should be read from chip after processing ini. And also the carrier leak calibration status is checked during init cal. As the init_cal is being called for fast channel change too, the tx_cl status only be read after full reset. Hence moving that into process ini function. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Add support to reuse Carrier leak calibrationRajkumar Manoharan
This patch adds support to reuse Carrier leak calibration during fast channel change for AR9480 chips. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Add support to reuse TxIQ cal measurementsRajkumar Manoharan
Pass an argument to decide whether to reuse the Tx IQ calibration measurements or not during fast channel change. This will be later used by MCI support for AR9480. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-09 15:44:58 +0000