summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2014-04-09ath9k: fix a scheduling while atomic bug in CSA handlingFelix Fietkau
Commit "ath9k: prepare for multi-interface CSA support" added a call to ieee80211_iterate_active_interfaces in atomic context (beacon tasklet), which is crashing. Use ieee80211_iterate_active_interfaces_atomic instead. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09ath9k_hw: reduce ANI firstep range for older chipsFelix Fietkau
Use 0-8 instead of 0-16, which is closer to the old implementation. Also drop the overwrite of the firstep_low parameter to improve stability. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09ath9k: Enable DFS only when ATH9K_DFS_CERTIFIEDJanusz Dziedzic
Add DFS interface combination only when CONFIG_ATH9K_DFS_CERTIFIED is set. In other case user can run CAC/beaconing without proper handling of pulse events (without radar detection activated). Reported-by: Cedric Voncken <cedric.voncken@acksys.fr> Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09b43: Fix machine check error due to improper access of B43_MMIO_PSM_PHY_HDRRafał Miłecki
Register B43_MMIO_PSM_PHY_HDR is 16 bit one, so accessing it with 32b functions isn't safe. On my machine it causes delayed (!) CPU exception: Disabling lock debugging due to kernel taint mce: [Hardware Error]: CPU 0: Machine Check Exception: 4 Bank 4: b200000000070f0f mce: [Hardware Error]: TSC 164083803dc mce: [Hardware Error]: PROCESSOR 2:20fc2 TIME 1396650505 SOCKET 0 APIC 0 microcode 0 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Processor context corrupt Kernel panic - not syncing: Fatal machine check on current CPU Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [2.6.35+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09rtlwifi: btcoexist: remove undefined Kconfig macrosPaul Bolle
There are references to four undefined Kconfig macros in the code. Commit 8542373dccd2 ("Staging: rtl8812ae: remove undefined Kconfig macros") removed identical references from that staging driver, but they resurfaced in rtlwifi. Remove these again as the checks for them still will always evaluate to false. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09ath9k_htc: set IEEE80211_TX_STAT_AMPDU for acked aggregated framesChun-Yeow Yeoh
Frame aggregation requires the IEEE80211_TX_STAT_AMPDU to be set so that mac80211 can report the last_tx_rate correctly. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09rsi: Fixed issue relating to doing dma on stack error.Fariya Fatima
Signed-off-by: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09rsi: Fixed issue relating to index of q_num.Fariya Fatima
Signed-off-by: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09rsi: Fixed issue relating to return value.Fariya Fatima
Signed-off-by: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09rsi: Fixed issue relating to variable de-referenced before check 'adapter'Fariya Fatima
Signed-off-by: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09rsi: Fixed signedness bug reported by static code analyzer.Fariya Fatima
Signed-off-by: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-09rsi: Potential null pointer derefernce issue fixed.Fariya Fatima
Signed-off-by: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-31Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-03-31rtl8187: fix use after free on failure path in rtl8187_probe()Alexey Khoroshilov
If allocation of io_dmabuf fails, rtl8187_probe() calls usb_put_dev(udev) while usb_get_dev(udev) is not called yet. As a result refcnt is decremented incorrectly and usb_dev can be used after memory deallocation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-31rtl8180: don't use weird trick to access "far" registersAndrea Merello
In rtl8180/rtl8185/rtl8187se the register space is represented using packed structure type. Register are thus accessed using a pointer of this type. All registers are packed toghether, and only small gaps are present. However Rtl8187se has also some "sparse" registers, very far from the "main register block". It could be possible to access them by simply declare huge reserved blocks inside the register struct (and this causes NO memory waste). However, for various reasons, access to those "far" registers is done with special dedicated macros, without declaring them in the register struct. This is done in an intricate manner, that makes code less readable and caused static analisys tool to produce warnings. This patch keeps the "macro" mechanism, but it changes its implementation in a simplier and more straightforward way. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-31rsi: rsi_91x: misleading debug printkDan Carpenter
There is a missing set of curly braces here so the debug output says "Probe confirm received" unintentionally. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-31mwifiex: fix spinlock bad magic bugAmitkumar Karwar
[ 6630.450908] BUG: spinlock bad magic on CPU#1, ksdioirqd/mmc1/355 [ 6630.450914] Unable to handle kernel NULL pointer dereference at virtual address 0000004f [ 6630.450919] pgd = ecbd8000 [ 6630.450926] [0000004f] *pgd=00000000 [ 6630.450936] lock: 0xeea4ab08, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 6630.450939] Backtrace: [ 6630.450956] [<c010d354>] (unwind_backtrace+0x0/0x118) from [<c060c238>] (dump_stack+0x28/0x30) [ 6630.450960] Internal error: Oops: 5 [#1] SMP ARM [ 6630.450964] Modules linked in: uvcvideo videobuf2_vmalloc [ 6630.450980] [<c060c238>] (dump_stack+0x28/0x30) from [<c0315ab4>] (spin_dump+0x80/0x94) [ 6630.450988] [<c0315ab4>] (spin_dump+0x80/0x94) from [<c0315af4>] (spin_bug+0x2c/0x30) [ 6630.450996] [<c0315af4>] (spin_bug+0x2c/0x30) from [<c0315b80>] (do_raw_spin_lock+0x28/0x15c) [ 6630.451004] [<c0315b80>] (do_raw_spin_lock+0x28/0x15c) from [<c0610c24>] (_raw_spin_lock_irqsave+0x20/0x28) [ 6630.451016] [<c0610c24>] (_raw_spin_lock_irqsave+0x20/0x28) from [<bf07a7f4>] (mwifiex_exec_next_cmd +0x6c/0x45c [mwifiex]) [ 6630.451030] [<bf07a7f4>] (mwifiex_exec_next_cmd+0x6c/0x45c [mwifiex]) from [<bf07834c>] (mwifiex_main_process+0x2c8/0x464 [mwifiex]) [ 6630.451047] [<bf07834c>] (mwifiex_main_process+0x2c8/0x464 [mwifiex]) from [<bf0a093c>] (mwifiex_sdio_interrupt+0xc8/0x1cc [mwifiex_sdio] [ 6630.451064] [<bf0a093c>] (mwifiex_sdio_interrupt+0xc8/0x1cc [mwifiex_sdio]) from [<c04bbde0>] (sdio_irq_thread+0x178/0x31c) [ 6630.451079] [<c04bbde0>] (sdio_irq_thread+0x178/0x31c) from [<c0145514>] (kthread+0xc8/0xd8) [ 6630.451095] [<c0145514>] (kthread+0xc8/0xd8) from [<c0106118>] (ret_from_fork+0x14/0x20) This bug has introduced/exposed due to recent patch in which we cancel pending commands before suspend (using hs_enabling flag). The NULL pointer is dereferenced when both mwifiex_cancel_all_pending_cmd() and mwifiex_exec_next_cmd() try to access cmd pending queue simultaneously. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-31rtl8187: fix compile warningAndrea Merello
ANAPARAM3 register, defined in the rtl818x common register struct, is accessed as 16bit by rtl8187se and as 8bit by rtl8187b. Since I have no documentation about this, I can only stick to the reference code and to what is known to work. This issue has been addressed by a patch from Larry Finger that introduces an "union", in the register struct. In my last patch-set I applied it on the register struct, but I forget to update rtl8187 driver too. This patch does it. Suggested-by: Larry Finger <Larry.Finger@lwfinger.net> [ Original patch ] Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-31rtlwifi: rtl8188ee: enable MSI interrupts modeAdam Lee
Some HP notebooks using this rtl8188ee hardware module can't get AP scan results with pin-based interrupts mode, enabling MSI interrupts mode could fix it. As RealTek's testing results, RTL8188EE works well with both MSI mode and pin-based mode fallback. Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-31rtlwifi: add MSI interrupts mode supportAdam Lee
Add MSI interrupts mode support, enable it when submodules' msi_support flag is true, also could fallback to pin-based interrupts mode if MSI interrupts mode fails. RealTek's policy(on modules which work well with MSI interrupts mode) is: > If the platform supports both MSI and pin-based, use MSI. > If the platform supports MSI only, use MSI. > If the platform supports pin-based only, use pin-based. Also as RealTek's testing results, RTL8188EE and RTL8723BE work well with both MSI mode and pin-based mode fallback. Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-31mwifiex: use timeout variant for wait_event_interruptibleAmitkumar Karwar
It has been observed that system hangs during suspend, if host sleep activation fails due to a missing interrupt from firmware. Use timeout variant, so that the thread will be woken up when timer expires. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-31mwifiex: cancel pending commands for signalAmitkumar Karwar
When a thread is interrupted by signal, all wait_event_interruptible calls after queueing commands return an error. Numbers of commands in pending queue are increased in this case. Sometimes all commands nodes in pool are filled. We will cancel pending commands when signal is received. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-31mwifiex: scan command preparation failure handlingAmitkumar Karwar
When scan request is received, scan commands are prepared and queued into scan pending queue. There is a corner case when command nodes are full. So we stop queueing further scan commands and return an error. This patch makes sure that currently queued commands in scan pending queue are also freed in this case. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl818x: Update Kconfig for rtl8187seAndrea Merello
update description in Kconfig to state rtl8180 driver now supports also rtl8187se cards Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: enable rtl8187se supportAndrea Merello
Finally make rtl8187se works (hopefylly). This patch adds PCI ID for rtl8187, updates copyright notes and updates MODULE_DESCRIPTION. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: detect rtl8187se cardAndrea Merello
Add case to detect the rtl8187se card and its RF frontend. In this case set also accordingly mac80211 queue number. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: add WMM parameters configuration for rtl8187seAndrea Merello
Introduce a new function to configure AC parameters for TX queues on rtl8187se cards, and hook it onto mac80211 in order to enable WMM support. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: make sure RTL818X_MSR_ENEDCA is set for rtl8187seAndrea Merello
MSR register for rtl8187se must always have ENEDCA flag set. Write it accordingly when updated on BSS change. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: add ERP configuration for rtl8187seAndrea Merello
This patch adds ERP configuration support for rtl8187se to the existing ERP configuration function. It needs a different register offset and it must not apply rtl8185 workaround. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: add rtl8187se HW initializationAndrea Merello
This patch adds few functions that initializes extra stuff that is present only in rtl8187se HW, and it modify the existing HW initialization function where necessary Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: add RF code for rtl8225 zebra v4Andrea Merello
This patch introduce new RF code for rtl8225 zebra v4 radio frontend. This code contains a lot of black magic and it can work probably only with the radio embdedded in the rtl8187se single-chip. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: introduce functions for setting ANAPARAM 2 and 3 paramsAndrea Merello
rtl8180 has one register for analog converters setting ,rtl8185 has two and rtl8187se has three. Setting those registers require more than a simple write, and for one of them a function is already provided. This patch introduces functions for the other two. rtl8187se will use them. rtl8185 doesen't yet, but should Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: add rtl8187se params to eeprom readingAndrea Merello
rtl8187se nees extra parameters to be read from the eeprom. This patch adds support for it Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: config carbus register for rtl8187seAndrea Merello
configuration of carbus-related registers is different for rtl8187se. Introduce a dedicated function that does it for all cards in the proper way Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: add TX queue mapping and support for rtl8187seAndrea Merello
This patch adds tx queue mapping for rtl8187se and a long comment block about their usages. It adapts the TX function to use that map and it sets properly the TX descriptor rtl8187se-only fields Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: don't write MAR registers for rtl8187seAndrea Merello
MAR registers are not present in rtl8187se, and attempting to write to them must be avoided Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: introduce functions to enable/disable ints and add support for ↵Andrea Merello
rtl8187se This patch introduces two dedicated functions for enabling and disabling ints. Support for rtl8187se is also added to them Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: add ISR for rtl8187seAndrea Merello
rtl8187se has more queues and different ISR flags. This patch adds a separated ISR handler for rtl8187se Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: support for rtl8187se RX descriptorsAndrea Merello
Currently RX status descriptor and RX command descriptor are represented using the same struct type. This patch splits this by introducing different types for rx status and command descriptor. Doing this make it possible to handle rtl8187se RX descriptors easier. This patch do also this by adding specific cases where needed. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: add basic rate configuration support for rtl8187seAndrea Merello
Basic rate configuration is a bit different for rtl8187se. Adding this also fixes the gcc warning introduced in last patch about unhandled case in switch. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: add rtl8187se fields to TX descriptorAndrea Merello
This patch modifies the TX descriptor struct so it can work also for rtl8187se. Some reserved field is now meaningful, and where needed union is used. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl8180: add rtl8187se chip typeAndrea Merello
Add back rtl8187se chip type to the enum for known chips. This causes unhandled switch/case warning that will be fixed in following patch Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtl818x: add registers for rtl8187seAndrea Merello
Adds registers for rtl8187se to the rtl818x common struct Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27mwifiex: cancel pending commands during host sleepAmitkumar Karwar
Sometimes we may end up downloading other commands when host sleep is configured. This patch makes sure that pending commands are cancelled and we stop queueing further commands during host sleep. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27mwifiex: correction in sleep confirm command sequence numberAmitkumar Karwar
Incremented sequence number was not being used for SLEEP confirm command. This patch fixes the issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27mwifiex: corner case NULL pointer dereference fixAmitkumar Karwar
When next scan command is delayed due to Tx traffic and meanwhile synchronous command is received followed by a signal, we cance all pending commands. NULL pointer dereference is seen in this case while queueing next command in scan delay timer. This patch adds a check to fix this issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27brcmfmac: use mfp if required from user-spaceDaniel Kim
The struct cfg80211_connect_params indicate whether the connection should use management frame protection (mfp). If required set the MFP_CAPABLE flag in the firmware command. This is supported from user-space by wpa_supplicant since v2.1. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27rtlwifi: Remove casts of pointer to same typeJoe Perches
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Around these changes: o Remove unnecessary parentheses o Use consistent dereference style (change ptr[0] to *ptr) o Argument alignment Done via coccinelle script: (and some typing) $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27mwifiex: Remove casts of pointer to same typeJoe Perches
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27carl9170: Remove casts of pointer to same typeJoe Perches
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 10:22:11 +0000