summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2013-01-07brcmfmac: do not reconfigure refill rx on 0-length packet.Hante Meuleman
When USB device gets removed rx complete comes with 0-length packets. Do not refill those packets. In some rare cases it can cause infinite loop. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07brcmsmac: remove dead codePiotr Haber
Dead code after AMPDU restructure. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07brcmsmac: allow user-space setting of interface addressArend van Spriel
The interface address of the wireless device is determined by the permanent address stored in the device. This patch allows it to be overridden from user-space. Reported-by: Maximilian Engelhardt <maxi@daemonizer.de> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07brcmsmac: use perimeter lock in add_interface() callbackArend van Spriel
All callbacks that access driver functions should do that under perimeter lock protection. The add_interface() callback was lacking this lock. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07brcmsmac: increase timer reference count for new timers onlyPiotr Haber
On hardware reintialization reference count of already existing timers would be increased again. This leads to problems on module unloading. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07rt2x00: rt2800: convert read_eeprom functions to return an int valueGabor Juhos
Both the rtt2x00usb_eeprom_read and the ioremap functions are allowed to fail, however their return values are not checked in the read_eeprom functions in the rt2800{pci,usb} drivers. The patch adds the missing checks, and converts all read_eeprom functions to return an int value, so the error values can be propagated up to the 'rt2800_validate_eeprom' function. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07ath9k_hw: Remove AR9485 1.0 macroSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07brcmsmac: initialize morepending in brcms_b_recv()Geert Uytterhoeven
drivers/net/wireless/brcm80211/brcmsmac/main.c: In function ‘brcms_b_recv’: drivers/net/wireless/brcm80211/brcmsmac/main.c:7636: warning: ‘morepending’ may be used uninitialized in this function Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07iwlegacy: allow to enable PSStanislaw Gruszka
Power save support was removed from iwlegacy due to possible firmware crashes problems it cause. I use to plan first inspect code to find reason of problems, fix them and then allow to enable PS. But realistically - code inspection will not happen, so let's do it, and wait for eventual bug reports. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07iwlegacy: add flush callbackStanislaw Gruszka
Dump implementation of flush, which just wait until all TX queues become empty. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07ath9k: fix column header comments for some initval arraysGabor Juhos
Some 3-column initval arrays have wrong comments. The column of these arrays is indexed by the 'freqIndex' variable in 'ar5008_hw_process_ini' which only depends on the actual band. The 'initvals' tool from 'qca-swiss-army-knife' prints the correct comment lines for these arrays, since commit 'atheros-initvals: fix comments for non-fastclock 3-column tables' however the comments were not refreshed in ath9k. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07carl9170: refactor carl9170_update_beaconChristian Lamparter
This patch moves parts of carl9170_update_beacon into separate subroutines, so the parts become more manageable. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07carl9170: remove custom NUM_TID and friendsChristian Lamparter
The commit: "mac80211: introduce IEEE80211_NUM_TIDS and use it" introduced a generic NUM_TID definitions for all everyone. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07carl9170: disable hw crypto for p2p networksChristian Lamparter
While the driver supports HW offload in a single P2P client configuration, it doesn't support HW offload in the concurrent P2P GO+CLIENT configuration. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07carl9170: don't enable hw crypto offload, if the fw doesn't support itChristian Lamparter
Previously, op_start would set disable_offload always to false, even if it was set to true by the fw parser. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07carl9170: Only specify interface combinations if more than one interface is ↵Christian Lamparter
possible Otherwise carl9170 triggers a warning in cfg80211, from net/wireless/core.c /* Combinations with just one interface aren't real */ if (WARN_ON(c->max_interfaces < 2)) Note: The number of supported interfaces is set by the carl9170 firmware. The default number of supported interfaces for all current firmwares is 2. Therefore this warning can only be observed with custom firmwares. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07carl9170: allow P2P_GO interface creation after P2P_CLIENTChristian Lamparter
Janusz Dziedzic reported that after a change in wpa_supplicant ["nl80211: Automatically use concurrent P2P if possible"], carl9170 was no longer able to host a P2P network. This patch tackles the problem by allowing GO interfaces to be registered, long after the P2P_CLIENT interface is brought up. Reported-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07carl9170: import 1.9.7 firmware headersChristian Lamparter
Import new headers from my firmware branch: <https://github.com/chunkeey/carl9170fw> visit our wiki at: <http://wireless.kernel.org/en/users/Drivers/carl9170.fw> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07carl9170: advertise support for TDLSChristian Lamparter
Based on a quick test [ath9k and carl9170], TDLS seemed to be working fine. And while we are at it, let's move the wiphy feature flag set from carl9170_alloc into a single place in carl9170_fw. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07ath9k_hw: use the devres API for allocationsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07ath9k: use the devres API for allocations/mappingsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07rt2800: refactor RFCSR initializationStanislaw Gruszka
rt2800_init_rfcsr() is too big, split RF initialization into per chip functions. Code will change, but we should setup the same values onto RF registers and in the same order as before. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-01-03iwlwifi: always check that grab_nic_access succeedsEmmanuel Grumbach
This allows to let sparse check that the NIC access is always released. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: fix spelling and value in LED registers.Eytan Lifshitz
Fix typo in the macro name and the wrong value. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: move some PCIe calls to better placesJohannes Berg
Synchronizing the IRQ is pointless when we will then enable the RF-Kill interrupt again, but is needed before we free it and the data needed to handle IRQs; move it to the free function. Simiarly, cancelling the replenish work struct can move to the function that frees the RX data structures. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: request IRQ only onceJohannes Berg
There's no need to request the IRQ every time the device is started, we can request it just once. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: don't treat a bool as an error codeEmmanuel Grumbach
iwl_trans_grab_nic_access returns a boolean. So ret should explicitely set to an error code and not rely on the value returned by iwl_trans_grab_nic_access. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: virtualize SRAM accessEmmanuel Grumbach
Different transports implement the access to the SRAM in different ways. Virtualize it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: virtualize iwl_{grab,release}_nic_accessEmmanuel Grumbach
Since different transports have different ways to wake the up the NIC, we need to virtualize it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: use __packedJohannes Berg
Use __packed instead of __attribute__((packed)). Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: let the op_mode run a FW while in RFKILLEmmanuel Grumbach
In some cases, the fw should run even if the NIC is in RFKILL. Make the API more flexible to allow that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: don't verify fw after downloadEmmanuel Grumbach
No need to verify that the fw has been written correctly. In case it hasn't, we won't get ALIVE notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: clean up code in AGGEmmanuel Grumbach
If we take a pointer to the tid_data, then use it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: make the BC table layout configurableEmmanuel Grumbach
This is needed for newer NICs. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: split TX aggregation stop actionJohannes Berg
When TX aggregation is stopped, there are a few different cases: - connection with the peer was dropped - session stop was requested locally - session stop was requested by the peer - connection was dropped while a session is stopping The behaviour in these cases should be different, if the connection is dropped then the driver should drop all frames, otherwise the frames may continue to be transmitted, aggregated in the case of a locally requested session stop or unaggregated in the case of the peer requesting session stop. Split these different cases so that the driver can act accordingly; however, treat local and remote stop the same way and ask the driver to not send frames as aggregated packets any more. In the case of connection drop, the stop callback the driver is otherwise supposed to call is no longer required. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03regulatory: use IS_ERR macro family for freq_reg_infoJohannes Berg
Instead of returning an error and filling a pointer return the pointer and an ERR_PTR value in error cases. Acked-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03regulatory: remove handling of channel bandwidthJohannes Berg
The channel bandwidth handling isn't really quite right, it assumes that a 40 MHz channel is really two 20 MHz channels, which isn't strictly true. This is the way the regulatory database handling is defined right now though so remove the logic to handle other channel widths. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211_hwsim: allow testing paged RXJohannes Berg
Paged RX, i.e. SKBs with (some of) the data in pages instead of the SKB header data (skb->data) can behave differently in the stack and cause other bugs. To make debugging easier add an option to hwsim to test with such SKBs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Really fix tuntap SKB use after free bug, from Eric Dumazet. 2) Adjust SKB data pointer to point past the transport header before calling icmpv6_notify() so that the headers are in the state which that function expects. From Duan Jiong. 3) Fix ambiguities in the new tuntap multi-queue APIs. From Jason Wang. 4) mISDN needs to use del_timer_sync(), from Konstantin Khlebnikov. 5) Don't destroy mutex after freeing up device private in mac802154, fix also from Konstantin Khlebnikov. 6) Fix INET request socket leak in TCP and DCCP, from Christoph Paasch. 7) SCTP HMAC kconfig rework, from Neil Horman. 8) Fix SCTP jprobes function signature, otherwise things explode, from Daniel Borkmann. 9) Fix typo in ipv6-offload Makefile variable reference, from Simon Arlott. 10) Don't fail USBNET open just because remote wakeup isn't supported, from Oliver Neukum. 11) be2net driver bug fixes from Sathya Perla. 12) SOLOS PCI ATM driver bug fixes from Nathan Williams and David Woodhouse. 13) Fix MTU changing regression in 8139cp driver, from John Greene. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) solos-pci: ensure all TX packets are aligned to 4 bytes solos-pci: add firmware upgrade support for new models solos-pci: remove superfluous debug output solos-pci: add GPIO support for newer versions on Geos board 8139cp: Prevent dev_close/cp_interrupt race on MTU change net: qmi_wwan: add ZTE MF880 drivers/net: Use of_match_ptr() macro in smsc911x.c drivers/net: Use of_match_ptr() macro in smc91x.c ipv6: addrconf.c: remove unnecessary "if" bridge: Correctly encode addresses when dumping mdb entries bridge: Do not unregister all PF_BRIDGE rtnl operations use generic usbnet_manage_power() usbnet: generic manage_power() usbnet: handle PM failure gracefully ksz884x: fix receive polling race condition qlcnic: update driver version qlcnic: fix unused variable warnings net: fec: forbid FEC_PTP on SoCs that do not support be2net: fix wrong frag_idx reported by RX CQ be2net: fix be_close() to ensure all events are ack'ed ...
2012-12-19Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-12-17drivers: remove reference to feature-removal-schedule.txtTao Ma
In commit 9c0ece069b32 ("Get rid of Documentation/feature-removal.txt"), Linus removed feature-removal-schedule.txt from Documentation, but there is still some reference to this file. So remove them. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17wireless: fix Atheros drivers compilationVladimir Kondratiev
Bug introduced in commit: wireless: allow Atheros card to not depend on ath.ko Commit in question changed CONFIG_ATH_COMMON to CONFIG_ATH_CARDS as "Atheros card" indication in drivers/net/wireless/ath/Kconfig but it is used also by drivers/net/wireless/Makefile If there are only Atheros cards that do not require ATH_COMMON, whole Makefile for Atheros cards was not executed; and as result, driver won't compile in this case. Change in CONFIG_ option name should be reflected in the drivers/net/wireless/Makefile Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Tested-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-17rt2x00: zero-out rx_statusGabor Juhos
In commit 'mac80211: support radiotap vendor namespace RX data' new fields were added to 'struct ieee80211_rx_status' and those fileds must be zeroed. However the rt2x00 driver stores driver specific data in the cb array of the rx skbs, so the fields might contain garbage and this can cause unexpected behaviour. The rt2x00 driver from the compat-wireless-2012-12-01 tarball caused the following warning: WARNING: at /devel/ramips/build_dir/target-mipsel_r2_uClibc-0.9.33.2/linux-ramips_rt305x/ compat-wireless-2012-12-01/net/mac80211/rx.c:115 ieee80211_rx_irqsafe+0x274/0xbcc [mac80211]() Modules linked in: dwc_otg ledtrig_usbdev nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc rt2800pci(O) rt2800lib(O) rt2x00soc(O) rt2x00pci(O) rt2x00lib(O) mac80211(O) usbcore usb_common nls_base crc_itu_t crc_ccitt eeprom_93cx6 cfg80211(O) compat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi leds_gpio button_hotplug(O) gpio_keys_polled input_polldev input_core Call Trace: [<801e96b4>] dump_stack+0x8/0x34 [<80010a9c>] warn_slowpath_common+0x78/0xa4 [<80010ae0>] warn_slowpath_null+0x18/0x24 [<80a9710c>] ieee80211_rx_irqsafe+0x274/0xbcc [mac80211] The patch ensures that each field gets initialized with zeroes. Cc: <users@rt2x00.serialmonkey.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-13Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
2012-12-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-12-11Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-nextJohn W. Linville
2012-12-11Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-12-11ath9k: check pdata variable before dereferencing itGabor Juhos
Due to my recent commit (ath9k: allow to load EEPROM content via firmware API) smatch complains about that the 'pdata' variable in 'ath9k_hw_init' can be NULL and it is dereferenced before checking that. That is absolutely correct. Check the 'pdata' variable before using it to avoid a NULL pointer dereference. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-20 12:51:10 +0000